Used Cylinder With Hot Foil for sale (11,307)

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Godpfoy Nkqxox Amujub Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: excellent (used), Year of construction: 1960, Format (cm): 54x72 Guodpfx Amey Nmhmouob Number of Colors : 2 (round+flat)

Condition: new, Year of construction: 2025, ABB IRB1200-7/0.9 NEW!!With Omnicore C30 controller 09.2025 ABB warranty untill have 2 robots on stock. Godoxq Tugspfx Amujub DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, Year of construction: 2017, operating hours: 2,590 h, 2017 | Wacker Neuson EZ28 with 3 excavator buckets | Used Mini Excavator < 7t | 2590 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19800 or Make an Offer. Godpoy D T Ezjfx Amuoub Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 63 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine stared and ran there is a little rubbing from slow ring 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39885 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2016, operating hours: 4,098 h, 2016 | Wacker Neuson 50Z3 with 3 excavator buckets | Used Mini Excavator < 7t | 4098 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 25400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 58 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition, moderate play in the boom, cleanup bucket needs redoing. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39893 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Gujdpfx Ajy D T A Tjmujb

Condition: used, Year of construction: 2018, operating hours: 1,871 h, 2018 | Wacker Neuson EZ36 with 3 excavator buckets | Used Mini Excavator < 7t | 1871 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 26000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 62 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Gedpfx Amjy D Tz Asujub Very good working and preservation condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39890 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), mileage: 502,853 km, power: 478 kW (649.90 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, fridge, navigation system, onboard computer, parking heater, retarder, second fuel tank, soot filter, spoiler, = Additional options and equipment = - Roof spoiler - Cabin - Air suspension - Particulate filter - Auxiliary heater = Notes = Scania R650 Highline 6x4 – Manual gearbox with retarder – Full air – 2x tanks MY: 20-7-2020 KM: 502,853 YS2R6X40005591186 6x4 Manual gearbox Retarder Full air suspension Gsdpfx Aey Hq E Remuoub 2x tanks Navigation Refrigerator = Further information = Technical information Number of cylinders: 8 Transmission Transmission: Opti Cruise, 12-speed, automatic Axle configuration Suspension: air suspension Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Tyre tread left: 40%; Tyre tread right: 40% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 13,000 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Rear axle 2: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 13,000 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Weights Unladen weight: 10,664 kg Payload: 502,853 kg Gross vehicle weight: 34,999 kg Condition Technical condition: good Optical condition: good

Condition: good (used), mileage: 476,184 km, power: 272 kW (369.82 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2014, Equipment: AdBlue, air conditioning, central locking, cruise control, fog lights, onboard computer, soot filter, = Further options and accessories = - Front work lights - Heated mirrors - Windscreen - Enclosed cab - Cab - Air suspension - Particulate filter - PTO (power take-off) = Remarks = Volvo FM370 6x2*4 – HIAB X-Hiduo 188 E-5 Crane with remote control – Euro 6 MY: 23-10-2014 KM: 476184 YV2X922C1EA768827 Gjdoy Hq A Aepfx Amueub HIAB Crane with remote control Rear steering axle Euro 6 I-Shift Sideboards = Further Information = Transmission Transmission: I-Shift, 12-speed, automatic Axle Configuration Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Steered; Left tyre tread: 40%; Right tyre tread: 40% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 2: Tyre size: 385/55R22.5; Max. axle load: 7,500 kg; Steered; Left tread: 50%; Right tread: 50% Weights Unladen weight: 14,363 kg Payload: 13,636 kg Gross vehicle weight: 27,999 kg Functional Details Body manufacturer: HIAB X-Hiduo 188 E-5 Condition Technical condition: good Visual condition: good

Condition: used, mileage: 440,335 km, power: 206 kW (280.08 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, tail-lift, = Additional Options and Accessories = - Aluminum fuel tank Gusdpfxoy Hqxkj Amueb - Windshield - Cabin - Automatic pre-heater = Remarks = Scania P280 4x2 - Box with side doors - Tail lift - Full air suspension - Euro 6 MY: 29-10-2014 KM: 440335 YS2P4X20002101904 Box dimensions: 756 - 248 - 261 Zepro tail lift Full air suspension Euro 6 Double glazing = Further Information = Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steering axle; Tire tread left: 30%; Tire tread right: 30% Rear axle: Tire size: 295/80R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30% Unladen weight: 10,545 kg Payload: 8,955 kg Gross vehicle weight: 19,500 kg Tail lift: Zepro, rear door

Condition: good (used), mileage: 472,401 km, power: 213 kW (289.60 HP), first registration: 03/2015, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,420 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,400 mm, loading space width: 2,520 mm, loading space height: 2,620 mm, Year of construction: 2015, Equipment: AdBlue, cruise control, tail-lift, = Additional Options and Equipment = - Rear work lights - Front work lights - Heated mirrors - Windscreen - Automatic heating system = Remarks = MAN TGM 18.290 – Tautliner with sideboards – Tail lift – Full air suspension – Euro 6 – Automatic transmission Year of manufacture: 1-3-2015 Mileage: 472,401 km VIN: WMAN28ZZ5FY322324 Box dimensions: 7.40 x 2.52 x 2.62 m Tail lift Full air suspension Euro 6 Automatic = Further Information = Suspension: Air suspension Front axle: Tire size: 315/70R22.5; Max. axle load: 7,500 kg; Steered; Tire tread left: 20%; Tire tread right: 20% Rear axle: Tire size: 315/60R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left (inner): 50%; Tire tread left (outer): 50%; Tire tread right (inner): 50%; Tire tread right (outer): 50% Guodpfx Aeyk E A Dsmueb Gross vehicle weight: 18,000 kg Tail lift: Rear flap Technical condition: Good Visual condition: Good Please contact VAEX The Truck Traders for more information.

Condition: used, Year of construction: 2023, 2023 Cloos Robot Welding Cell With QRC-300 Robot & Qineo Next 452 Premium MIG/MAG Welding Source - With Leuze Electronic MLS Safety Light Curtains, Welding Torch Cleaner & Pendant Controls. Dual Rotary Transfer Table dimension 650 x 450mm. Cloos QRC-300 Robot- Swivelling Range Axis 1 -170 ° / +170 °, Axis 2 -90 ° / +125 °, Axis 3 -220 ° / +70 °, Axis 4 -170 ° / +170 °, Axis 5 -135 ° / -135 °, Axis 6 -300 ° / +300 °, Swivelling Speed Axis 1 200 °/sec, Axis 2 200 °/sec. Axis 3 230 °/sec, Axis 4 490 °/sec, Axis 5 540 °/sec, Axis 6 520 °/sec. Working Area Ø3,000mm. Range 2,000mm. Pay Load 8kg. Repeatability +/-0.1mm. Floor Space 400 x 400mm. Weight 110kg. S/No. 0881590000-20040 (2023). Qineo Next 452 Premium- Welding Current 25A/15V-450A/36.5V. Welding Current At 60% Duty Cycle* 450A/36.5V. Welding Current At 100% Duty Cycle* 350A/31.5V. Open Circuit Voltage 80V. Mains Voltage 380V-480V/3 Phases. Connection Cable 4 x 6mm2. Mains Fuse Slow-Acting 32 A. Type Of Protection IP. Insulation Class F. Type Of Cooling F. Dimensions L720 x W340 x H500mm. Weight Of Power Unit 63kg. Weight Of Cooling Module 28kg. S/No. Qinx 1963 (2023). Wire Drive Units QINEO NexT-Wire Feed 30m/min, Wire Ø0.8-2mm. Overall Dimensions W350 x D270 x H230mm. Weight 10.2kg. Gusdpfx Aeyx Hzxomujb

Condition: not inspected (used), functionality: unexamined, total length: 730 mm, total width: 700 mm, total height: 1,000 mm, overall weight: 250 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 23/06/2026 and 26/06/2026! Auction of a workshop drawer cabinet with the following contents: Gedpfjy D R E Ssx Amusub Twist drills Reamers Incomplete gauge block set Squares Threading dies Grinding wheels Springs Electric hand tools MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 730 x 700 x 1,000 mm Weight: 250 kg External reference: 28

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item between 23/06/2026 and 26/06/2026! Auction of a workshop trolley with the following contents: Open-end spanners Gusdjy D Ry Ajpfx Amueb Combination spanners Socket set Screwdrivers Pliers Spirit level MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 870 x 460 x 1,000 mm Weight: 70 kg External reference: 56

Condition: not inspected (used), functionality: unexamined, total length: 600 mm, total width: 300 mm, total height: 2,000 mm, overall weight: 250 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 23/06/2026 and 26/06/2026! Gsdpfx Amsy D Rrreusub Auction of a workshop cabinet including various pneumatic accessories such as fittings, couplings, and air hoses! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 600 x 300 x 2,000 mm Weight: 250 kg External reference: 78

Condition: not inspected (used), functionality: unexamined, total length: 730 mm, total width: 500 mm, total height: 1,000 mm, overall weight: 250 kg, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obliges the buyer to collect the item on time between 23.06.2026 and 26.06.2026! Auction of a workshop drawer cabinet with the following contents: Various ejectors Springs Contact pins Fittings MACHINE DETAILS Guodpfoy D Nv Njx Amuob Dimensions & Weight Dimensions (L x W x H): 730 x 500 x 1,000 mm Weight: 250 kg External reference: 29

Condition: not inspected (used), functionality: unexamined, total length: 750 mm, total width: 400 mm, total height: 1,000 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Auction of a workshop trolley with the following contents: Various twist drills Milling cutters Hand tools Files MACHINE DETAILS Dimensions & Weight Gusdpey D Nufsfx Amuob Dimensions (L x W x H): 750 x 400 x 1,000 mm Weight: 150 kg External reference: 16

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 5640/5, overall weight: 70 kg, plate length: 400 mm, plate width: 400 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item in a timely manner between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Plate dimensions: 400 x 400 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 400 x 400 x 400 mm Gusdpey D Nm Iefx Amusb Weight: 70 kg External reference: 26

Condition: new, Year of construction: 2026, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Gedpfod Dczzex Amueub Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Please don't hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Included: Sheetmaster, Toolmaster TOP machine Price on request Gusdpfsx Ifcmox Amueb

Condition: used, first registration: 10/1992, color: other, Year of construction: 1992, OLD QUALITY HEAVY DUTY WOOD TRAILER , EXTENDIBLE , WITH JONSERED 2190 CRANE. Gedpfoy Emnxsx Amujub

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro C7200x’ colour production system Items for sale: 1 x Ricoh Pro C7200x with the following specifications: Includes Fiery Controller E-45A Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5050 incl. Banner Sheet option Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,403,577 pages Colour: Approx. 1,749,798 pages Black: Approx. 653,779 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! Gsdpfx Aey Dffyemujub A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2021, functionality: fully functional, Bespoke Hot Table, we built to cast hot polyurethane components, we were holding tool temps at 110 degrees to cast the parts. So perfect for molding casting or curing. Also with close down sides to protect the bed when not in use. Heat Transfer Oil S2 machined Aluminum table with oil ways for circulation we found to be much more efficient than electric. Using a Tool Temp TT-181 reconfigured for oil usage - directly by Tool Temp temperature 0-150 degrees ( we have never tried higher) Circulation cut off valve for flow and return Heat Pipes changed before decommissioning Godpfxsxpxmxe Amusub Spare pump connectors provided Being sold as the department has closed and the machine is no longer required. Sizes Heated Bed 600mm wide x 1800mm long x 60mm thick Bed Height 930mm Table sizes 660mm Width 1860mm total length Closed Height 970mm Full working condition - Ex works Aylesbury Buckinghamshire England, we can export at a additional cost. Can be seen working

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Gedpsy Ixxbjfx Amujub Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: used, Year of construction: 2018, 2018 | MAN TGS 18.500 4x4H BLS with 2010 Kempf SKM 31/2 SR tipper semi-trailer | Used Tipper Truck | 349909 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 35400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 33 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good driving truck no further issues , PTO functions OK 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40504 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Gujdpeyu Tqwsfx Amujb ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, 2018 | MAN TGS 18.500 4x4H BLS with 2023 Kempf SKD 32/2 3-way tipper semi-trailer | Used Tipper Truck | 368567 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 46200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 33 inspection points 30 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good and Well kept truck, no further issues PTO functions OK during inspection 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40518 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Gusdpfsyttnmsx Amujb