Used Cutting Saw for sale (15,793)

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm Fgjdpozinzrefx Aivoh 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Fgjdpen Hwl Asfx Aivsh Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Condition: used, SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 - volt. 380/50 Fedpsiux Izofx Aivegh - s/n 2401011 - ce rules

Condition: excellent (used), Catalog number 8055 TECHNICAL DATA - max. blade diameter: 350mm - blade bore diameter: 30mm Fodezu Sdbjpfx Aivsgh - blade guard - cutting height for a 300mm blade: 90mm - max. cutting width: 800mm - possibility of angled cutting in the vertical plane, by adjusting the arm or the blade - arm rotation: right/left - motor: 400V, 2.9kW - table dimensions: 1260x1000mm - dimensions (L/W/H): 1460x1330x1500mm - weight: 220kg ADVANTAGES – Made in Italy – Very good condition – Used saw Net price: 5900 PLN Net price: 1372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 500 mm, power: 10 kW (13.60 HP), New Optimizing saw SALVAPUSH 2000 by SALVAMAC The automatic optimizing saw SalvaPush_2000 is born from over twenty years of experience in wood optimizing saws. Fgodpfxod Tyf Uj Aivoh The operator has just to mark the quality of the wood and the presence of defects, the optimizing saw will do the rest. The machine cuts the best possible combination of measures, reducing waste to a minimum and improving productivity, all in total safety. SalvaPush_2000 is a numerically controlled optimizing saw with integrated computer and SALVA-OPTIM software to have a quick and easy communication. Some sections of the program are dedicated to statistic and cutting results, with updates in real time and diagnostic. The touch screen, with USB and teleservice connections, facilitates data reading and typing. By Christian Salvador- SALVAMAC

Condition: new, Model Name Shark 332-1 CCS Fgjdpfxsgvquwe Aiveh

Condition: used, Year of construction: 2002, cutting height (max.): 100 mm, cutting width (max.): 2,500 mm, saw blade diameter: 400 mm, saw blade bore: 50 mm, total length: 4,400 mm, total width: 3,600 mm, total height: 1,100 mm, overall weight: 1,500 kg, No. 3270 Double cut-off saw Eima 122 Used, year of construction 2002 Double cut-off saw / double crosscut saw 2 motors, 4.4 kW Both saw units are swiveling Maximum saw blade diameter 400 mm Bore 50 mm Cutting width 210 - 2500 mm Fjdpjy Ef Hyefx Aivjgh Cutting depth 2500 mm Cutting height 100 mm Vacuum suction for workpiece clamping Automatic width adjustment defective, cutting width is currently adjusted using the hand crank Installation dimensions approx. 4400 x 3600 x 1100 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: as good as new (ex-display), Hans Schreiner Metal Bandsaw - Demonstration Machine! Fgjdpovrvu Aefx Aivoh Hans Schreiner metal bandsaw with pivoting arm, designed for professionals. Features include smooth hydraulic feed for precise cutting pressure, electric coolant system, suitable for all metals, steels, and stainless steel. Equipped with quick-action vise, automatic cut-off, selectable automatic or manual operation. Comes with stand and reinforced frame for increased stability, CE compliant. Technical data: Motor output S6 1900 W (1500 W S6-100% duty cycle), wheel diameter 380 mm, saw blade dimensions 3160 x 27 x 0.9 mm, swivel range 45° left, 60° right, max. cutting capacity at 90°: 370 x 220 mm, cutting speed: 34 / 68 m/min, packaging dimensions (L x W x H): 1770 x 765 x 1120 mm, weight: 365 kg Representative image. Prices subject to change. Errors, misprints and omissions excepted.

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting Fgjdpjwb Hxvjfx Aivjh - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 961228, cutting width (max.): 1,200 mm, pivoting range: 35 °, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - N. 2 motors 2 hp - N. 2 blades diam. 350 mm Fgjdpox Rw H Ajfx Aivsh - Min / max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Volt. 380/50 - S/N 961228 - Year 1996

Condition: new, Year of construction: 2026, warranty duration: 12 months, TRSI Monoblock Integrated Pusher – The Top of the Range in Europe If you are looking for an innovative, fast, and reliable automatic optimizing crosscut saw, the TRSI is the ideal choice. Fully customizable to meet your specific needs, it is designed for fixed-length or optimized cutting, making it suitable for a wide range of industrial applications. Ideal for Various Industries Packaging – Precise cutting of single boards or bundles, also perfect for trimming plugs. Windows and Doors – Advanced optimization to select quality and defects, minimizing waste. Furniture – Millimetric precision for cutting finished semi-finished products with maximum quality. Flooring and Parquet – High-precision cutting for wooden flooring applications. Cutting-Edge Technology The TRSI is equipped with an advanced programming software that simplifies operations and optimizes production processes: Fixed-Length Cutting: Predefined sequences for repetitive and precise machining. Optimized Cutting: OL Version: Length-based optimization to minimize waste. E Version: Full optimization with defect elimination to maximize yield. Customizable Optimization Priorities: Choose between commercial value, waste reduction, quantity, length, or a mixed strategy. Immediate Integration with company management systems without additional interfaces. Online Remote Assistance for continuous technical support. Intuitive HD Touchscreen with USB data import capability. Industrial CNC Computer ensuring uninterrupted production. Ultra-Precise and Fast Movement High-speed pusher system on steel linear guides with ball recirculation and double carriage, ensuring smooth and precise movements. High-performance brushless motors for superior speed and reliability. Reinforced structure for flawless movement, eliminating vibrations and slippage. Protected stroke with visible pneumatic lifting, allowing maximum control in every cutting phase. Powerful and Reliable Cutting Unit Robust aligner with integrated silent blower for a more comfortable working environment. Pneumatic pressure system on linear guides with ball recirculation for perfect holding. Multiple rubberized wheels with oil-bath clutch, ensuring maximum grip and preventing slippage. Accessories to Maximize Productivity Custom loaders to eliminate downtime and boost efficiency. Manual and automatic printers for clear and precise marking of semi-finished products. Fsdpfxov Iqcmo Aivjgh Optimized unloading systems tailored to specific processing needs. Trust Cursal for Uncompromising Production Efficiency With the TRSI, your company can achieve unprecedented levels of efficiency and precision. Discover our accessories, loaders, and unloaders to customize your system and optimize every stage of the cutting process. Contact us today for a customized consultation and take your production to the next level.

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm Fjdpfxjpcmthe Aivjgh -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor Fsdpfxjv Iccfo Aivsgh • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, Model Name Fgodpfx Aogvkbcjivoh Shark 282 CCS

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Fgjdehw Ng Iopfx Aiveh Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: new, Year of construction: 2026, Cutting height 125x220 mm machine weight ab. 450 kg Motor output 5,5 kW Fsdpfx Aoyk Idweivegh

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,200 mm, overall weight: 600 kg, total width: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, Equipment: saw blade guard, Saw blade diameter: 350-800 mm Fsdpfx Aioz A Th Uovogh Saw blade arbor: 30 mm Working height: 900 mm Cutting heights: see brochure Cutting widths: see brochure

Condition: new, Year of construction: 2025, Semi-automatic optimising crosscut saw with electronic positioner with push-stop mode COSTCUTTING OPTIMIZING SAW Superpush 150 is the centre for the cutting and entry level optimisation. It is designed as the true technological evolution of traditional cutting methods, able to increase productivity and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Horizontal plane with mobile protection to favour the loading of the work piece. Carriage with custom-made stop function and pusher. Linear unit composed by toothed belt with steel cables inside and sliding guide with linear bearings. Horizontal and continuous piece deposit plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a touch screen panel with integrated NC. Software running on Linux with customized interface. Colour display 15,6”, resistant TOUCH SCREEN for a complete safety in industrial environments. Programs import via USB Possibility of Tele-service through internet. + Macro Excel. Fgodpfsg Hzvgjx Aivsh FAST Software S4U Lite Brushless positioner motor with digital servo-driver. Quick selection interface Stop/Pusher Adjustable cutting speed. RELIABLE AND SAFE Movements with sliding bearing with double anti-dust protection. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Two-handed safety manual control. Machine certified "CE" by the Certifying Agency, not self-certified.

Condition: new, Model Name Fgedpjl Sva Iofx Aivsh SHARK 331-1 NC 5.0 SPIDER

Condition: used, SECOND-HAND MANUAL CUTTING SAW MM. 350 Fsdpjwr Uk Isfx Aivjgh

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine Fgsdew Rg Emopfx Aivjh - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: new, Year of construction: 2025, Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects. Fgsdpfsfg U H Nex Aiveh COSTCUTTING OPTIMIZING SAW SuperPush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Special 30° inclined plane to favour the loading and keep the work piece squared. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. Horizontal deposit/marking plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam. Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Total length: 15,50m Fgjdpoppwx Eefx Aivsh Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage Fgodpfeu R S I Hex Aivsh ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V

Condition: used, Double Head Up-Cut Saw for PVC – STB SD500S7 – Year 2006 The machine is equipped with Ø 500 mm saw blades, a 6.2 kW motor and a pneumatic system operating at 7 bar. Its robust 1,250 kg structure ensures stability, cutting precision and long-term reliability. Main Features Brand: STB Model: SD500S7 Year: 2006 Automatic double head cutting saw Suitable for aluminium and PVC profiles Ø 500 mm saw blades Blade bore: Ø 30 mm Blade speed: 2250 rpm Installed power: 6.2 kW Three-phase power supply: 400 V Fedpfx Aezaa Tisivogh Operating pressure: 7 bar Weight: 1250 kg