Used Cut Cutting Machine for sale (92,165)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, Clearance sale due to shutdown: all woodworking equipment now available at unbeatable prices Hnodpfx Ajvd A Nwjacsu Maximum cutting length in machine series: 2500mm Minimum cutting length in between circulars: 160mm Maximum cutting height: 110mm 5 cutting disks

Condition: new, Year of construction: 2023, In good technical condition, fully functional and testable. TVARcut LF 3015 GA Hedpfxevtyp Te Aacenu Year of manufacture: 2023 (demonstration machine) Laser source power: 6 kW Max. material thickness: 27 mm Number of pallets: 2 pcs For sheet format: max. 3000 x 1500 mm Machine including voltage stabilizer and laser source cooling Total weight: 6600 kg Including training for your operator.

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Hsdpfxswu Rm Re Aacsnu Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: good (used), Year of construction: 2019, Gebruikte waterstraalsnijder van Microstep (ex lease) Type: AquaVut 6001.25 WW Tafelafmetingen: 6000 x 2500 mm Hnedpfxjxldvqe Aacou Hypertherm 4100 bar pomp 2 snijkoppen Bouwjaar: 2019

Year of construction: 2010, condition: used, with operator platform, 2 BUSCH conveyor belts, format: 74x106 cm Hedpfxexnanhj Aacsnu

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m '’MasterCut’ Plasma Rotator with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Hnodpfx Aaexnmbnscsu TEKA filtration system 141025

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Hsdpfx Aeg N Nlveacsnu Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: Hnsdpfx Asu Tg Spjacsu There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutting machine. Model C780-M8. This paper cutting machine comes from a government agency and has seen very little use. Complete with all standard accessories and chrome table. This machine is 100% operational. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Please request a price including transport (location: the Netherlands). Regards, Henk Hoos. Hnedpfew E I Elsx Aacsu

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Siemens, DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine Year of manufacture: 2010 Hsdpfxjxllfas Aaconu Control: Siemens 840 D Power Technical Data Max. travel X-axis: 540 mm Max. travel Y-axis: 500 mm Max. travel Z-axis: 700 mm 5-axis laser precision machine for processing diamond tools up to Ø 355 mm and 420 mm in length • Linear drives in X/Y with acceleration > 1 g • High-dynamic torque motors in both rotary axes (B and C axes) • Compact machine design with only 4 m² footprint + Keller extraction system

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automated saw for quality sorting of boards – Edger-Crosscut Saw-Conveying Unit for Sawmill Timber Grading JRIMAC Twin-Cut This installation is designed for sawing and optimal sorting to separate grades. Hnedsxm R U Aspfx Aacju Edger (complies with current safety standards): Cutting length 6.0 m – Cutting height 120 mm – Maximum cutting width against stop 380 mm – Retractable saw blade cuts in both directions (forward and reverse) – Pressure bar with safety device – Positioning lasers – Adjustable cutting speed. Crosscut Saw: Cutting unit at both ends – Unit 1 is fixed – Unit 2 can be positioned at 4,000 mm, 5,000 mm, and up to 6,000 mm. Conveying Unit – The board is fed from the right to the edger by toothed wheels – The operator rips the boards longitudinally and marks the quality (X, O, //, etc.) – Offcuts are automatically discharged at the rear into a trolley – The edged timber is conveyed and crosscut automatically to the desired length – End trimmings are ejected into containers or bags – The timber continues on roller tracks to be picked up and stacked by a third party according to its grade. Scissor Lift Table (not included in the machine price): Upstream, the timber is placed on a scissor lift table and brought to the height of the edger/operator. 400 Volts – 63A – 22 kW – 550 mm blade diameter – Control panel with programmable touch screen Machine dimensions: Length 8.80 m x Width 4.40 m x Total height 3.50 m – Length of conveying unit to stacking area: 15.0 m – Full footprint fits within a rectangle of 8.80 x 19.5 m – 3,200 kg Existing customer base: There is currently a steady clientele in French-speaking Switzerland for timber selected based on quality criteria – This external market is also available for sale. The machine is in good technical and visual condition – Available mid-December 2025 (Y07-pa300k-ppoc100k/pv30k)

Condition: excellent (used), Year of construction: 2013, Carton blank die-cutting machine, low operating hours. The machine is still connected and can be demonstrated. Immediately available. Hnodpfx Ajxluukoacsu

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 20.4007.08/208-030, working range: 3,000 mm, sheet thickness (max.): 60 mm, total length: 13,000 mm, table length: 12,500 mm, table width: 3,000 mm, The non-functional machine can still be restored to working order with various repairs. The following machine components are defective and must be repaired: - Computer defective (computer not included) - Height control defective - Cable break in control wiring Hnsdoxfki Djpfx Aacju The flap extraction table was renewed around 2017 and is operational. Power source: Kjellberg Fine Focus 800 (last operated in 2024) IHT PCS 2100 Linear Drive The machine must be dismantled and loaded on site by the buyer. An existing fully functional extraction system can be purchased separately if required (price negotiable).

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Hedpfxexciume Aacenu Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: good (used), Year of construction: 2021, operating hours: 14,000 h, functionality: fully functional, Professional finishing in the classic digital printing format: This is why we have developed the world's first flatbed die-cutter for the B3+ sheet format KAMA ProCut 58. The versatile professional die-cutting/embossing machine (580 x 400 mm) is extremely versatile. Punching, creasing, scoring, perforating and kiss-cutting labels, blind embossing and Braille as well as hot punching of plastic. Paper from 80 g/m² Cardboard max. 800 g/m² Plastic 80 - 800 g/m² (up to 1 mm) Sheet format max 580 x 400 mm Hodpfsxb A Tgex Aaconu Sheet size min 210 x 148 mm Speed* 6,000 sheets/h Punching force 120 t (1.2 MN) Punching format max 570 x 380 mm Gripper edge 10 mm Dimensions (length x width) 2.6 x 1.75 m

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Equipment: cutting thickness 40 mm Hjdpfx Aasvfxw Hjconu

Condition: good (used), Steel wire sheet cutter Cutting length 3900 mm Dimensions Length: 5100 mm Width: 1700 mm Height:3100 mm Hsdpfx Ajgiplveaconu

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Hnjdpfsxmvdpsx Aacsu Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1513, working range: 6,000 mm, type of input current: AC, input voltage: 230 V, working width: 2,000 mm, overall weight: 450 kg, input current: 25 A, MicroStep OxyCut 6001.20 G: - Working area: 6000 x 2000 mm - 1x master torch carriage for oxy-fuel cutting - New PCs since 2024 (Windows 11) - Without filter unit Hnodpsu Sqfyefx Aacsu Price EXW Wouters Cutting & Welding

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine. The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces. After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently. Hode Ebqnjpfx Aacenu Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet) Delivery including a test equipment consumables consisting of: * Assortment of 20 cutting discs * 5 litres METCOOL coolant Option: Machine base cabinet

Condition: good (used), Wohlenberg 76 SPM Paper Cutting Guillotine A guillotine for paper, plastic, foil, cardboard, leather, etc. Machine has been overhauled, is in very good condition, and ready to use. Wohlenberg’s most successful design, an indestructible machine. Technical specifications: Working width: 760 mm Hnsdpfxoxmvcle Aacsu Stack height: 110 mm Power supply: 380V Weight: 1200 kg Equipment: – Programmer with step memory, material ejection, etc. – Air table – Hydraulic pressure with adjustable force – Safety guards – Pressure plate – Spare knife – Cutting sticks – Tools – Paper stack tapping block

Condition: good (used), Polar Mohr 92 ED Paper Cutting Guillotine Machine in very good condition. Reviewed and ready to use. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 920mm Hnsdpsxmvbhefx Aacju Stack height: 130mm Programmer with color display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Side tables Knife change via control panel Weight: 1890kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Hnjdpfxsxk U Emj Aaceu Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards Hnjdexgbgpepfx Aaceu – Operating tools and instructions with CE documentation.

Condition: good (used), Wohlenberg 115 MCS-2 Paper Cutting Guillotine Machine in perfect condition, ready for production. Description: – Programmable controller with step memory – Optimized cutting cycle – Continuously adjustable clamping pressure – Quick knife change – One-piece machine body = increased stability Technical data: Cutting length: 1150 mm Maximum stack height: 165 mm Hnodoxgbf Sspfx Aacou Infeed depth: 1150 mm Minimum cutting width with sheet metal under the pressure beam: 97 mm Minimum cutting width without sheet metal under the pressure beam: 30 mm Net weight: 3100 kg