Used Cross Cut Optimization for sale (23,763)

Condition: excellent (used), Omga V113P Double Mitre Saw for Frames Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Two motors, each 1.1 kW Maximum cutting width: 70 mm Maximum cutting height: 75 mm Dwedpfjw T Rpzsx Af Ijd Pneumatic material clamps Extended table on the right side

Condition: good (used), design: Cutmatic Dwedpswzvlxofx Af Ied strip width: max. 2.150 mm strip thickness: max. 6 mm

Condition: excellent (used), functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 150 mm, cutting length (max.): 352 mm, total width: 800 mm, total length: 4,150 mm, total height: 1,300 mm, saw blade diameter: 330 mm, overall weight: 600 kg, type of input current: three-phase, disc diameter: 330 mm, rotational speed (max.): 2,800 rpm, BLITZ 330-L double mitre saw for wood, aluminium Dwodpfx Afsxl Eade Ied Specification: • Condition – used, after inspection/service • Manufacturer – BLITZ • Model – 330-L • Main motors – 2 x 1.5 kW and 2,800 rpm • Pneumatic head control • Max. cutting length – 352 cm • Min. cutting length – 38 cm • Max. cutting cross-section – 100x150 mm (at right angle) • Max. blade diameter – 330 mm • Spindle axis – 20 mm • Miter cutting range – from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 600 kg • Overall dimensions – 415 x 80 x 135 cm (L x W x H) Additional information: • Very good, factory technical condition • Photos shown reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: new, Year of construction: 2024, Professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of wood machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs cross-cutting of the material into sections of a specified length, eliminating material defects marked with a fluorescent pencil and using a sensor to analyze the position of the pencil. It is worth noting that the machine can measure and cut in an automatic cycle. Model: TechnologieCNC CROSS CUT 306-4M Effective machining length - 4000 mm (optionally 6 m) Effective machining width - 30-230 mm Effective machining thickness - 40-80 mm Effective machining in cross-section - 250x30mm Scanning speed - 80m/min Scanning device - Infrared sensor of the German brand SICK Dsdpfx Afetvmv Ro Iswd Scanning/detection of defects - Fluorescent sensor of the German brand SICK Table height - 800mm Feed speed - 60m/min Pusher servo drive - AC DELTA 750w Saw lift servo drive - AC DELTA 1kW Cutting saw motor - 7.5kW, 3Ph, 2930 rpm. Saw blade diameter - fi 500 mm Extraction port diameter - 100mm x2 Total power: +-10kW Overall dimensions - 6750 x 1450 x 1800mm Transport dimensions: 535 x 80 x 110 - table, 200 x 100 x 160 - console Weight: 1436 kg

Condition: excellent (used), functionality: fully functional, Graule ZS 135 Motor: 400 V / 2.0 kW Dwodpfxsxf Hcme Af Ijd Speed: 3800 rpm Cutting length: 430 mm (at 90°) Cutting height: 135 mm Mitre range, horizontal: 45°-90°-25° Saw blade diameter: 350 mm Extraction port: 100 mm Weight: 100 kg

Year of construction: 2025, condition: ready for operation (used), Workpiece Workpiece weight 50 kg Additional Equipment Dwedowlkzvepfx Af Isd Outfeed Table: Made of solid steel with a 30° incline. Length 3000 mm. Safety Features: Rear protective cover, dual dust protection, and automatic lubrication. This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: used, Double cross-cut saw / format saw Rüco 21 for cutting, trimming and shortening wood or panels. saw: 3 cutting width: max. approx.: 2,050 mm Depth of cut: max. approx.: 2,200 mm Cutting depth: max. approx.: 2,200 mm Djdpfxslfdx Ue Af Iowd cutting height: max. approx. 100 mm More technical data: see PDF Further technical data: see PDF

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Dwedpfx Afeu Atmus Isd Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, OMGA T421 IDC000097 - saw blade diameter: 400 mm - complete with saw dust filter Dsdpfxju Dhupj Af Iswd

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Dwedpfxohw Ng Ie Af Ied Pneumatic side clamp device

Condition: new, Year of construction: 2024, Under-table cross-cut saw UTK-600 also with a pneumatic vertical front protective shield Execution according to the new current PLC safety control ltd. Of the new machinery directive Technical specifications: - Motor power 7.5 kW S1 - Max. Saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Speed ​​on the saw shaft: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Necessary air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Saw blade feed pneumatic drive - * NEW two-hand safety PLC control - Automatic engine brake - Set of operating keys - Emergency stop button Dwodpfef Sqy Dsx Af Ijd - Speed ​​regulator for saw blade feed - Fixed vertical protection - Upper safety pressure device (pneumatic protective hood) - suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Year of construction: 2011, condition: ready for operation (used), This HOLZMA PROFI HQP 11/16/56/L/X was manufactured in 2011. It is an optimizing cross-cut saw designed for precision and efficiency in wood processing. Ideal for businesses aiming to enhance their woodworking capabilities. Contact us for more information. Application Types Sawing (Wood) Dwedpowb Imuefx Af Isd

Condition: excellent (used), functionality: fully functional, saw blade diameter: 420 mm, Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 410 mm (at 90°) Cutting height 170 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 90°-45° (left) Dwsdpoxdtlfsfx Af Ijd Saw blade O 420 mm Suction nozzle 100 mm Weight 120 kg

Condition: used, Year of construction: 2007, Infeed : 4000mm with digital pusher Outfeed : 4000mm with rollers Main engine : 1,1 Kw Saw blade Ø : 420mm/30mm hole Dwjdpfjv E Eccsx Af Iod Saw blade rpm : 2800 2 x pneumatic clamps Saw blade adjustment : -25/90/+22 degree Original maunals included

Condition: used, Double rip saw IDL000811 - max width: 2500 mm - electric cabinet Dsdpfxju At Tbs Af Iewd - manufacturer: Tegle/norway

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Weight 80 kg Total power requirement 0,75 kw Djdpfx Afevz Hf Do Iewd

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 Dsdpfx Afjqpdkce Ijwd - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Condition: new, - NEW -Description:- Robust welded steel construction- Workpiece is automatically fixed with each cut by saw blade cover- The saw blade is moved upwards via a pneumatic cylinder and dips back into the machine body after each cut- Saw blade feed infinitely variable via adjusting screw on the front of the machine- Effective chip and intrusion protection made of Plexiglas- High operating safety due to two-hand control- Standard with 1m roller conveyor to the left and right of the machine, and material stop with scale- Saw blade change via large side doorTechnical data:General informationSaw blade speed(s) 3000min¯¹Saw blade diameter 500mmSaw blade bore 30mmSaw blade thickness 4mmMitre angle noSuction nozzle diameter 125mmSound pressure level89dB(A)Dimensions and weightsLength (product) approx. 3000mmWidth/depth (product) approx. 1600mmHeight (product) approx. 1500mmWeight (net) approx. 700kgElectrical dataPower drive motor 6kWMotor speed 2900min¯¹Total power consumption 15.5ASupply voltage 400VMains frequency 50 - 60HzStandards and approvalsEMC class APneumatic connectionAir consumption approx. 33l/minPneumatic working pressure 6 - 8barCutting areasCutting capacity 0° (square) solid material 160 x 160mmCutting capacity 0° (rectangular) solid material 400 x 100mmScope of delivery:- 1 m infeed roller conveyor, to the right of the machine- 1 m outfeed roller conveyor including manual material stop with scale, to the left of the .: 5651500 Dodpfx Afovwfluj Iswd

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Djdpfjfhbuysx Af Iewd Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Year of construction: 2023, condition: new, TNDG manual positioner by handwheel and clamping pneumatic. Measurement display per linear encoder and digital display Available in dimensions 3,4,6 and 8 meters Working height: 800-1050 mm Permissible load 70 kg / meter Roll dimension 40X300 mm Dwjdjpa Nzyepfx Af Iod PACKAGING AND DIMENSIONS: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg)

Condition: used, Year of construction: 2021, functionality: fully functional, nuSLIT STRAIGHT PROCUT PRINT - Retrofit Year of manufacture 2021 - Factory overhauled Manufacturer CIDAN Forstner Equipment: - Control system: SPS-F3 - Speed: 25 m/min - Standard feed shaft - Standard feed table Automatic straightening unit: - Upper straightening roller adjustment: Programmable (MOP) - Straightening shafts: Standard Dwsdpfx Afowbh S Rs Ijd Gaping: - Upper shaft adjustment: Motorized (MOV) - Number of splitting knives: 5 pairs - Splitting knife type: Stainless steel Cross-cutting: - Sectional shear (PROCUT) - Knife type: Stainless steel - Motorized guillotine shear extension Labeler: - Labeler (LP) Interface: - nuIT Connection

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3940x850x1350 mm Weight 410 kg Dedpfxsvz Eyte Af Iowd Total power requirement 5,5 kw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 - precise cutting from the program, Dedpfxsw Tc Hre Af Ijwd - with a controlled ruler, (with a stop) - 3.7Kw, 350mm sheet size.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! The Legend_600 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide. Dwodpfsfcdnljx Af Iod

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x930x1080 mm Weight 390 kg Total power requirement 1,5 kw Dsdpfovz Et Hjx Af Iewd