Used Cross Conveyors Feeders for sale (17,306)

Condition: ready for operation (used), Lot of Belt Conveyors, consisting of Nr1= Brand: LKOREMAN, year of manufacture 2010 A-A  length: 1000 mm, Beltwidth: 1000 mm Power : 0,2 kW Drum motor , Beltspeed: 0,4 m/s. Nr2= Brand: LKOREMAN, year of manufacture 2001 Curve conveyor 20°, Beltwidth: 700 mm Isdjxnndwjpfx Ag Ujal Power : 0,37 kW gearbox , Beltspeed: 0,2 m/s.

Condition: used, Roller conveyor + cross conveyor + roller conveyor Iasdjk Ritpspfx Ag Uel good technical condition

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, coil weight: 15,000 kg, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, inner diameter: 508 mm, sheet thickness (max.): 4 mm, outer diameter: 1,800 mm, coil width: 1,600 mm, number of blades: 4, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 75 mm, load capacity: 15,000 kg, space requirement width: 3,500 mm, space requirement length: 12,000 mm, space requirement height: 3,500 mm, feed roller diameter: 250 mm, number of feed rollers: 2, CTL Demaq Evo. New, stock. Coil up to 15 Tons D1800, 20-24" Nominal. Coil Cart hydraulic. 2 pinch-role of feeder and 11 straight rolls. Hardened and chromed. Servo Nidec in straightener and decoiler. 4 longitudinal knifes, axis (HC) 230 mm, knifes 300 mm. Isdpfou Ey D Sjx Ag Ueal Transversal shear. Full made in Spain in our facilities. Optional other devices and configurations. The most advanced Demaq SPL machine. 2 units available.

Condition: used, Year of construction: 1983, functionality: unexamined, Max. working width: 750 mm Max. working height: 150 mm Iajdpsv Tnagjfx Ag Ujl Spindle diameter: 50 mm Hydraulic motor: 3 kW

Condition: used, functionality: fully functional, Wema Probst QF50 Cross-Mill Machine Iaodpjwc Tdnjfx Ag Uel Cross-Mill machine for processing round timber with a swivel table for adjusting the milling angle. 2 machining stations 1 cross-milling unit 1 drilling unit

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: Syst.no. 105, Complete package: used roller conveyor by Mannesmann Demag. Includes 50x 3m non-driven straight sections, 20x 45° curves, 10 driven sections with rubber covering, numerous supports and guides, 3 separate driven curves, all elements are 50 cm wide. All parts originate from a cosmetics plant. The system spanned two floors, and corresponding documentation is available. If interested, please feel free to contact us. Thank you in advance. Additionally, several boxes of spare parts are also available. Ijdpoxv Df Tsfx Ag Ueal

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Working direction: from right to left. Automatic loading unit. Minimum workpiece length 600 mm (shorter workpieces can be placed directly on the machine infeed table). Model “Speed” (faster material loading, see PDF). Usable length 6000 mm. Cutting accuracy +/- 1.5 mm. Cutting range, see diagram (PDF). Motor 5.5 kW, saw blade ø 500, 3600 rpm. Electronic control CONTROL 6.0 / Windows. Full optimization with error correction. Waste disposal package. Outfeed table with integrated cross pushers 3500 x 1500 mm. PALETTI data connection for use with cutting lists issued in the office. Automatic labeling (PALETTI print manager). LAYOUT. See all technical features attached PDF. Iedpfx Agoxtmwms Ujal

Condition: used, Year of construction: 2004, Feeder(s) for gathering machines Kolbus ZU 840 Year: 2004 Description: Isdpfowut D Eox Ag Usal - Number of feeders: 16 - ATC thickness control - Pump(s): Nash-Elmo -Set up element -Intermediate element Feeders can also be sold individually. To be used for feeders or extension of existing machines!

Condition: used, Cross table with handwheels Table size: 300 x 200 mm Travel in X: 160 mm Ijdpjxf Uxisfx Ag Ujal Travel in Y: 240 mm Construction height: 141 mm - Spindle pitch 4 mm (4 mm travel per handwheel rotation) - Rotatable by 340° - Dovetail guideway - 2x T-slots in the clamping surface, 14 mm Weight: 38 kg Good condition

Condition: used, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Isdoxmk Ddopfx Ag Usal Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: like new (used), 100 Pcs. Feeders with Magnetic Vibrators and Unbalance Motors. Find our complete stock on our website. Different widths and lengths. With different vibrators from quality manufacturers like Aviteq / AEG, Jöst, Friedrich, UHDE, Vibra, Honert, Herweg. Also in stainless steel or for example covered with ceramic or rubber. Isdpfxjggfizo Ag Usal Please contact us to find a suitable feeder for you.

Condition: used, Cross Conveyor: - total length: 7000 mm - total width: 2300 mm - feed motor power: 0.75 kW - trimming saw for material - saw motor power: 2.2 kW Iasdoxu E E Espfx Ag Uel - max. saw blade diameter: 350 mm - cutting height: 80 mm

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Iaodpfsvwlqqsx Ag Usl Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1998, Stream feeders Iajdpstq Nnxjfx Ag Usl Müller Martini 3736 Year: 1997/1988 Description: - Stream feeders: 2 x

Condition: new, Container filling system / conveyor belt system Rotating tower with horizontally rotatable and longitudinally movable conveyor belt on stable galvanized frame, rotatably mounted. Incl. conveyor belt and high belt for automatic filling of three large capacity containers. SPS control distribution belt gear motor 2,2kW / conveyor width 900mm axis distance 5500mm drive slewing ring 0,6kW Rotation drive +/- 90 Iaodpfeb Sp D Rjx Ag Usl Conveyor belt conveyor width 600mm / centre distance 4000mm / drive 1,1kW High belt conveyor conveyor width 600mm / centre distance 4700mm / drive 1,1kW Colouring according to customer requirements Ordered goods Price and further information on request

Condition: used, Year of construction: 1993, functionality: fully functional, TRVE 450 + HM 500-30-120 + without CE marking as it was not in force in the year of purchase Iasdpoxyxuwefx Ag Uel

Condition: excellent (used), Max cutting width: 560 mm Max cutting height: 100 mm Motor: 7.5 kW Year of manufacture: 2007 Blade diameter: 700 mm (max 750 mm) Two-hand control Pneumatic clamp Iasdpfx Agsxz Up Ho Uol

Condition: good (used), Code: 0228 Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520 Iedpfx Agjxnxume Ueal

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Iajdpowlaxkefx Ag Uol Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Condition: new, table length 330 mm table width 220 mm x-travel 210 mm y-travel 125 mm table height 150 mm T-slots 12 mm weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Iaedpjupw Twofx Ag Uol Cross table with turntable

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz Iedjwb Hxvspfx Ag Usal - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: good (used), Roller conveyors and chain conveyors Iaedjd Sf Rqepfx Ag Uel

Condition: new, table length 600 mm Iajdpfxofgvzue Ag Uel table width 240 mm x-travel 370 mm y-travel 130 mm table height 165 mm weight 60 kg dimensions 0,8 x 0,45 x 0,2 mm Cross table with turntable

Condition: used, Horizontal Mitre Band Saw in Swivel Bow Design JAESPA Type W 320 G Serial No. 18793 / 99 Year of Manufacture: 1999 Cutting Capacity at 90° (Round): Ø 320 mm Cutting Capacity at 90° (Square): 320 x 320 mm Cutting Capacity at 90° (Flat): 460 x 200 mm Cutting Capacity at 45° (Round): Ø 290 mm Cutting Capacity at 45° (Flat): 290 x 220 mm Cutting Capacity at 45° (Square): 240 x 240 mm Cutting Capacity at 30° (Round): Ø 200 mm Cutting Capacity at 30° (Square): 200 x 200 mm Cutting Capacity at 30° (Flat): 220 x 200 mm Iaedpfxswwaz As Ag Uol Saw Blade Dimensions: 4120 x 27 x 0.9 mm Blade Speed: approx. 50 m/min Material Feed Height: approx. 630 mm Saw Motor Power: 1.5 kW Connection: 400 Volt, 50 Hz - Quick mitre adjustment via pivoting saw bow with rotary table and clamping - Infinitely variable mitre cuts from 30° - 90° - Hydraulic saw bow movement with rapid approach and return stroke after cutting - Material height detection via limit switch - Quick-adjust vice with eccentric clamping - Coolant system integrated in machine base - Emergency stop mushroom push button Required space (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm Iaodpfxeupw T Re Ag Usl table height 160 mm T-slots 12 mm weight 45 kg dimensions 0,6 x 0,45 x 0,2 mm Cross table with turntable