Used Counter Bracket for sale (3,672)

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 15,500 kg, rotor diameter: 800 mm, rotor width: 2,000 mm, power: 250 kW (339.91 HP), rotational speed (max.): 480 rpm, Equipment: rotational speed infinitely variable, Genox GXC2000G Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 250kW Drive Motor with outboard rotor bearings (200kW - 315kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 2,000mm wide x 800mm diameter cutting chamber with a choice of either a 5, 7 or 9 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Gsdpfxoz Ai Ume Aiksbw Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 149 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Gbsdpfs Aa Egksx Aikow Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 48V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - PIN code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology.

Condition: ready for operation (used), Year of construction: 1998, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: Series 16-T, number of axes: 4, This 4-axis STAR MICRONICS SR20 was manufactured in 1998. It features a FANUC Series 16-T control unit and includes an IEMCA Bar Feeder for enhanced productivity. The machine is operational and in good condition, with occasional faults in the hydraulic system. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR20 swiss type turning machine we have for sale. Contact us for further details. Gedpfx Ae Ad Ac Rjikebw - Condition: Good condition / Under power - occasional faults in the hydraulic system - Control Unit: FANUC Series 16-T- Optional Accessories / Attachments: IEMCA Bar Feeder- Additional Components: Part catcher / Small conveyor belt, Coolant lines Technical Specification Counter Spindle No

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm Gbodpfxjy Aaxrj Aikew • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1973, travel distance X-axis: 850 mm, travel distance Z-axis: 2,900 mm, controller manufacturer: SIEMENS, number of axes: 2, Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details. - Turning Length between Centers: Approx. 2850 mm- Faceplate Diameter: Ø 630 mm- Drive Power: 32 kW- Operating Hours: Approx. 60,000h - 70,000h (mathematically calculated after 1998 retrofit)- Control Unit: SIEMENS CNC Control- Additional Accessories / Scope of Delivery: Complete machine, 1x hydraulic steady rest (Ø 50 mm - Ø 150 mm), faceplate Gjdps Adp Tvjfx Aikobw Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating features (Type Jost JSK), mounted on the subframe ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Body: Crane interchangeable system: The body including the crane can be disassembled, and a fifth wheel plate is then mounted on the chassis. The function of the crane and body including the fifth wheel plate is also possible. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler track would also be available, net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed body as a steel/welded construction, removable ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed body painted. Color: RAL (chassis color) ? Removable aluminum side boards, manufacturer Suer, height 600 mm, anodized design with steps, removable stake pockets. ? Standard flatbed floor with welded 4 mm steel tread plate, painted in RAL (chassis color) ? 6 recessed lashing points 2500 daN each side, in slot profile with flexible arrangement. ? 4 x lashing points for chains 6500 daN (2x front and 2x rear on the body) ? Sturdy front wall consisting of a welded frame, welded 4mm steel sheet and 5 accessory hooks, front wall height approx. 1300 mm, steel design, painted, with 2 foldable eyelets for lashing straps, welded on. ? Cladding sheets, fenders made of aluminum tread plate (sandblasted, powder-coated and painted) ? Multifix stake pocket, 2 rows with a distance from the front and rear of approx. 80 cm. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection device at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hyd. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x FLASH lights in the bonnet ? 2 x LED under the body at the rear, each on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right under the body in the area of the support legs, mounted. Gbsdpfxjy Hm Eye Aiksw ? 4 x yellow LED light strips, 1x mounted on each support. Further information is available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the auxiliary frame Gedpfjy Hm Etjx Aikobw ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis. The crane and superstructure, including the fifth wheel, can also be used together. The vehicle has a total of two fifth wheels, each of which can be moved longitudinally. A crawler would also be available, net price is €149,900. ? Mounting/bolting of the crane and main support beam to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed design as a removable steel/welded structure ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with steps, removable Kinngripp stanchions. ? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color) ? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement. ? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure) ? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2 foldable loops for lashing straps, welded. ? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and painted) ? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for trailers ? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI crane manufacturer. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front panel ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available on request.

Condition: used, Folding machines Stahl T 52.3/4-T-F Falzmaschine - Folding machines Stahl T 52.3/4-T-F Year 1995- Serial-No. 69024/95-231703 Flat pile feeder - TREMAT 1.Folding unit 4 buckles 2.Folding unit 4 buckles Gateway buckles Counter Anti noise hoods Stream delivery include Kompressor Gbjdpfx Ao Af Am Eeikjw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, mileage: 105,815 km, power: 125 kW (169.95 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M629----RENAULT MASTER BOX VAN 2.3 DCI BOX VAN L3 H3----KM: 105,815, SERVICED ACCORDING TO MAINTENANCE SCHEDULE----LAST INSPECTION WITH OIL CHANGE AT 103,313 KM----LIKE-NEW M+S TIRES----* CRUISE CONTROL * SPEED LIMITER * ECO BUTTON * REARVIEW CAMERA * PARKING ASSISTANCE (PDC) REAR * TRACTION CONTROL * AIR CONDITIONING * EMERGENCY BRAKE ASSIST * START/STOP ----270° REAR DOORS----SUSPENSION SEAT----3 SEATS----* MULTIFUNCTION STEERING WHEEL * ELECTRIC DOOR MIRRORS * ELECTRIC WINDOWS * WOODEN FLOOR WITH 12X EYELETS * ALUMINUM WALLS * LASHING RAILS * START/STOP * STORAGE COMPARTMENT IN THE ROOF AREA * CENTRAL LOCKING WITH REMOTE CONTROL * BLUETOOTH HANDS-FREE SYSTEM * USB * ON-BOARD COMPUTER * ARMREST * WITHOUT SLIDING DOOR * STORAGE COMPARTMENT IN THE CAB * PASSENGER SEAT CAN BE FOLDED DOWN AS A TABLE ----Special equipment: * Storage Package * Storage compartment (closed) centrally in the dashboard * Seats in the cab: Double passenger seat multifunctional with storage compartment * Storage compartment with footwell lighting * Clipboard on the dashboard * Speed limiter system * Rear tailgate doors (opening angle 270 degrees) * Interior trim, cargo area partition * Glove compartment with cooling function Gsdpjzp Tw Ejfx Aikebw * Comfort Plus Package * On-board computer * Parking assistance rear * Seats in the cab: Lumbar support for the driver's seat * Metallic paint * Wheel covers * Spare wheel in driving condition * Seats in the cab: Driver's seat mechanically sprung Additional equipment: * Storage gallery * Airbag driver side * Exterior mirror electrically adjustable and heated * Outside temperature display * Side marker lights * Rev counter * Electronic brake force distribution * Anti-slip regulation (ASR) * Interior filter: Pollen filter * Body/structure: Box van, high roof, standard * Fuel tank: 105 liters * Cargo area partition * Steering column (steering wheel) height adjustable * Model update * Engine 2.3 Ltr. 125 kW dCi Diesel FAP Energy CAT * Wheelbase 4332 mm * Smoker's package * Low emission according to emissions standard Euro 6 * Gear shift indicator * Sliding door loading/passenger compartment right * Mud flaps front * Side protection strips * Seat cover / upholstery: Fabric * Seats in the cab: Driver's seat height adjustable * Start/Stop system engine * Lashing eyes cargo area floor * Heat-insulating glazing * Permissible total weight 3.50 t ----If desired, we can equip the vehicle with a trailer hitch. Professional installation - quick and reliable, starting from 599 € +++ Exclusive offer at Autohaus Mat GmbH: Up to €1,000 trade-in bonus - your advantage for changing vehicles! (only applies to commercial vehicles) +++ Contact us directly via WhatsApp at: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you can maximize the value of your vehicle and benefit from purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer tailor-made financing options, adapted to your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will accompany you from the initial consultation to the vehicle handover. 4. Our additional services: In addition to the vehicle purchase, we offer exclusive services for a smooth process: * Worldwide vehicle sales: Support with purchase and export, wherever you are. * Transfer plates

Condition: used, mileage: 120,000 km, power: 92 kW (125.09 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,040 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,399 mm, total width: 1,956 mm, total height: 2,498 mm, loading space length: 2,930 mm, loading space width: 1,650 mm, loading space height: 1,880 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, For sale is a well-maintained Renault Trafic L2-H2 panel van with the globally popular 1.6-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 standard * First owner * Complete service history * N1 truck registration Equipment: * Panel van, high roof, long wheelbase L2-H2 * Air conditioning * Webasto auxiliary heater, front and rear * Cruise control * Multifunction steering wheel * Navigation system * Sliding windows on the left and right * Heated exterior mirrors Gbedpfozz Ex Sox Aiksw * Electric exterior mirrors * Electric windows * Central locking * And much more... Technical data: Permissible total weight: 3040 KG * Unladen weight: approx. 1900 KG * Payload: 1140 KG * Towing capacity: 2000 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer plates (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system by means of ozone treatment. 2-stage polishing on the exterior * If necessary, paint correction and smart repair. All our vehicles have also undergone a thorough service. Of course, this includes new fluids, filters and other expenses that you don't need to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on Special equipment: Airbag passenger side, Airbag passenger side can be deactivated, Parking assistance front and rear, Window in the loading/cargo compartment: - sliding, left, Rear wing doors with glazing (opening angle 180 degrees), Rear window wiper, Rear window heated, Sound & Climate package with R-Link, Audio navigation system R-Link Evolution with touchscreen and Carminat TomTom, Hands-free Bluetooth system, USB connection incl. AUX-IN connection (Plug & Music), Load compartment partition with window, Wheel covers, Sliding door loading/passenger compartment right with sliding window, Interface for superstructures (CAN data bus), Side airbag front, Head airbag system (window bag) Additional equipment: Airbag driver side, Anti-slip regulation (ASR), Exterior mirrors electrically adjustable and heated, Battery 85 Ah, On-board computer, Rev counter, Automatic switch-on for driving lights, Interior filter: Pollen filter, Body/structure: Panel van, large-volume standard, Fuel tank: 80 Ltr., Steering column (steering wheel) adjustable, Engine 1.6 Ltr. - 92 kW dCi Diesel Energy, Fog lights, Wheelbase 3498 mm, Tyre repair set, Low emissions according to exhaust standard Euro 6, Seat cover / upholstery: Fabric, Seats in the driver's cab: Double passenger seat, Seats in the driver's cab: Driver's seat comfort, 3-way adjustable, Start/stop system, Lashing eyes in the cargo area on the side, Lashing eyes in the cargo floor, Pre-wiring for electrical superstructure, Heat-insulating glazing

Condition: used, mileage: 248,000 km, power: 75 kW (101.97 HP), first registration: 03/2016, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,100 mm, total width: 1,994 mm, total height: 1,948 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Volkswagen T6 pickup truck with the globally popular 2.0-liter diesel engine. The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 5 emission standard * First owner * VAT can be shown separately Equipment: Pickup bed * Air conditioning * Trailer hitch * Increased trailer load * Heated seats for driver and passenger * Multifunctional steering wheel * Truck registration * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 2800 KG * Unladen weight: 1730 KG * Payload: 1070 KG * Trailer load: 2500 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices Godpfxszqi A Ho Aikobw * Transfer license plates (5-day / customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! The special features: Disinfection of the interior and ventilation system using ozone cleaning. Two-stage polishing on the exterior * If necessary, paint correction and smart repair All of our vehicles have also undergone a thorough service. Of course, this includes new fluids, filters, and other expenses that you shouldn't have to worry about. Optionally, we can present the vehicle to an independent inspection center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments, or special requests, do not hesitate to contact us! More information and insights into our business philosophy can be found on: Special equipment: Trailer stabilization program, audio system Composition Colour (radio/CD player, MP3 playback function), loudspeakers (4), multimedia interface USB, electrical package 1, exterior mirrors electrically adjustable and heated, electrical interface for external use (CAN data bus) with connection terminal, rear window heated, interior filter: activated carbon filter (odor filter), gear knob/selector lever in leather, mobile phone interface Bluetooth, multifunction display Plus, smoker's package, spare wheel in driving condition, windshield washer nozzles heated and indicator for washer fluid level, windshield washer nozzles heated, indicator for washer fluid level, seats in the cab: driver and passenger seat heated, seats in the cab: driver's seat height-adjustable with lumbar support, seats in the cab: driver's seat height-adjustable, seats in the cab: lumbar support driver's seat, storage compartment under the pickup bed / body, left, winter tires additionally (customer information required) Other equipment: Airbag passenger side switchable off, airbag driver / passenger side, exterior mirrors with bracket, exterior mirror convex, with bracket, left, exterior mirror convex, with bracket, right, floor covering in the cab: rubber, roof lining comfort in the cab, driving assistance system: multi-collision brake (Multi Collision Brake), windshield laminated glass tinted, glove compartment lockable, interior filter: pollen filter, interior mirror dimming, body / superstructure: pickup bed standard, fuel tank: 80 liters, steering column (steering wheel) adjustable, engine 2.0 liters - 75 kW TDI, wheelbase 3000 mm, pollutant

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Counter Spindle No Driven Tools No Gjdpfsz Rxg Hex Aiksbw

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,672 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, overall weight: 4,200 kg, total width: 1,550 mm, total height: 2,160 mm, bar diameter (max.): 26 mm, product length (max.): 2,350 mm, number of axes: 8, This 8-axis Maier ML26 C5Y were manufactured in 2019. It features a spindle capacity of 26 mm and a rapid carriage speed of 32 m/min. The machine includes a robust coolant capacity of 260 l and is equipped with a bar feeder and extensive tooling package. Three machines available! If you are looking to get high-quality turning capabilities, consider the Maier ML26 C5Y swiss type turning machine we have for sale. Contact us for further details. - Carriage / Rapid Speed: 32 m/min - Main Spindle Capacity: 26 mm - Main Spindle Indexing: Mechanical indexing 5° - Main Spindle Headstock Stroke: 320 mm (Options: 220 mm, 450 mm) - Main Spindle Power Rating (100% / 60%): 5.5 kW / 7.5 kW - Main Spindle Collet: 161E - Counter Spindle Capacity: 26 mm - Counter Spindle Indexing: Mechanical indexing 5° - Counter Spindle Max. Travel (Z2): 220 mm (340 mm option) - Counter Spindle Speed: 0 - 8000 rpm - Counter Spindle Power Rating (100% / 60%): 5.5 kW / 7.5 kW - Counter Spindle Collet: 161E - Guide Bush Model: 451.001 - Coolant Capacity: 260 l / 1.5 bar - Cross Machining Lathe Tool Holders: 5 pcs. (12x12) - Driven Tools: 4 pcs. - Back Machining Tools: 4 pcs. Ø34mm (driven) - Back Machining Y2 (Option): 4 pcs. Ø34mm (fixed), 4 pcs. Ø34mm (driven) - Front Machining Tools: 5 pcs. (fixed) - Power On Time: 31,849 h 23 min - Cutting Time: 13519 h - Part Total Count: 1,052,178 pcs - Accessories: Bar feeder / loading magazine (FMB), oil mist extractor (LTA), 2 x live tools, extensive tooling package included - Total Power: 17.3 kW - Voltage: 400 / 230 / 24 V Gbedpfxez R A Uuj Aikew Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 2009, bore capacity in steel (diameter) 40.0 mm thread cutting attachment M 30 spindle taper MT 4 MK table surface area 1200 x 500 mm turning speeds 50 - 2000 U/min arm length 1050 mm column diameter 220 mm spindle stroke - max. 200 mm feed range 0.08 - 0.50 mm/U distance spindle /table 760 mm weight 2740 kg range L-W-H 2450 x 2450 x 2800 mm Original price approx. 20.000 Euros Special price on request Equipment: - Robust electro-hydraulic radial drilling machine Godpfez R D Icex Aikebw - Sturdy construction ensures vibration-free operation - Compact design with electro-hydraulic quick-clamping system - Infinitely variable speed adjustment (50–316 + 316–2000 rpm) - Digital speed display - Motorized height adjustment of the drill head - Drill head swivels 180° - Arm movable forwards/backwards and swivels horizontally - Clockwise/counter-clockwise spindle rotation - Manual & automatic spindle feed - Large work table with 3 T-slots - 1x heavy-duty machine vice * STANKO IMPORT "200-0225C" * Jaw width: 250 mm * Jaw height: 60.0 mm * Opening width: approx. 300 mm - Thread-cutting attachment - Separate coolant system - Front-mounted emergency stop button - T-slots for mounting on the side and rear of the machine - Operating manual

Condition: used, Year of construction: 2012, 2012 | Haulotte Star 10 | Used Vertical Mast Lift 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6000 or Make an Offer. Gbedpfxjz Rmd Tj Aikow Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 29 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: All operations work during inspection, Fault code EP123, Hour counter cannot be observed, Main electric motor does not sound good (scraping), drive motors also audible. The maximum working height is 10 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40921 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DECKEL DMU 80 E was manufactured in 1999. It features an X-axis travel of 800 mm, Y-axis travel of 650 mm, and Z-axis travel of 550 mm. The machine includes a table size of 1100 mm x 650 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DECKEL DMU 80 E vertical machining centre we have for sale. Contact us for further details. - Operating Hours (Power-On Counter): 41,077 h - Operating Hours (Spindle / Motion Counter): 14,986 h - Control Unit: HEIDENHAIN CNC Control (with 3D control panel and handwheel pendant) - Interface Ports: RS 232 C / RS 422, 230V connection - Optional Equipment: Grid fixture plate mounted on the table, tool magazine, chip tray / coolant reservoir with pump, electronic handwheel pendant Gbjdpfjz Sp Eisx Aikjw

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 266 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: HEIDENHAIN, controller model: Plus 4110, number of axes: 2, Horizontal turning machine manufactured in 2003. This DMT Kern CD480 features a main drive power of 17 kW and a total power requirement of 25 kW. Including tool turret with 12 positions and various VDI30 holders. If you are looking to get high-quality turning capabilities, consider the DMT Kern CD480 machine we have for sale. Contact us for further details. - Control Unit Model: Heidenhain Manual Plus 4110 (Type: BFT 121 G / LE 412 M) - Voltage / Frequency: 400 V / 50 Hz - Nominal Current: 45 A - Control Voltage: 24 V DC - X-Axis Feed Motor: 4.0 Nm (3000 rpm) - Z-Axis Feed Motor: 6.0 Nm (3000 rpm) - X-Axis Software Limit: -30.50 mm to +235.0 mm - Z-Axis Software Limit: -115.0 mm to +982.0 mm - Operating System / Software: Win98 4.10.2222, IPLC 41HD467 Technical Specification Counter Spindle No Driven Tools No Gjdpfx Aiez Sp Rljksbw

Condition: used, empty load weight: 8,786 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2023, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2023, Equipment: ABS, Unladen weight: 8786 kg, Permissible total weight: 38000 kg, Cargo space (L W H): 13,403 mm x 2,460 mm x 2,700 mm, Tire size: 385/65 R22.5, Cargo space volume: 89 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Anti-jackknife device, Front liftable axle, Pallet box, Electronic Braking System (EBS), Fire extinguisher holder, Spare wheel holder (2x), Bolted chassis, Container doors, Temperature recorder, Axle mileage counter, 1x15 and 2x7 pin connection socket, Anti-splash guard, International customs seals, Aluminum rims. You can find an overview of all our available vehicles on our website. Do you need financing? We offer customized financing options, as well as full-service or telematics services. We will be happy to advise you personally. Gedpfxez Sv T Ho Aiksbw

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 10,000 rpm, travel distance X-axis: 108 mm, travel distance Y-axis: 104 mm, travel distance Z-axis: 140 mm, spindle motor power: 3,700 W, total height: 1,597 mm, total width: 837 mm, overall weight: 1,150 kg, controller manufacturer: FANUC, product length (max.): 1,622 mm, number of axes: 4, This 4-axis Citizen Cincom B16 was manufactured in 2013. It features a maximum machining diameter of Ø16 mm and a maximum machining length of 135 mm. The machine includes a main spindle speed range of 200–10,000 rpm and a counter spindle with a maximum chucking diameter of Ø16 mm. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom B16 horizontal turning machine we have for sale. Contact us for further details. Machining capacity • Maximum machining diameter: Ø16 mm • Maximum machining length: 135 mm • Main spindle through-hole diameter: Ø20 mm • Maximum front drilling diameter: Ø6 mm • Maximum front tapping: M6Travels • A2/back-spindle axis travel: 200 mmRapid feeds • X-axis: 21 m/min • Y-axis: 21 m/min • Z-axis: 15 m/min • A2-axis: 15 m/minMain spindle • Speed range: 200–10,000 rpm • Maximum speed with rotary guide bushing: 8,000 rpm • Motor: 2.2 / 3.7 kWCounter spindle (back spindle) • Maximum chucking diameter: Ø16 mm • Speed range: 100–6,000 rpm • Maximum drilling diameter: Ø5 mm • Maximum tapping: M3 • Motor power: 1.0 kWDriven tooling • Maximum drilling diameter: Ø5 mm • Maximum tapping: M4 • Tool spindle speed: 100–4,500 rpm • Drive motor: 0.5 kWTooling • Total mountable tools: 15 • Cutting tools: 5 • Secondary machining tools: 2 • Front drilling tools: 4 • Back drilling tools: 4General • Input power capacity: 5.2 kVAUnits available and hours • Unit 1 • Manufacture date: 05/2013 • Power On: approx. 82,600 h • Run Time: approx. 31,847 h • Cutting Time: approx. 22,613 h • Unit 2 • Manufacture date: 06/2013 • Power On: approx. 81,474 h • Run Time: approx. 31,403 h • Cutting Time: approx. 20,127 h Additional equipment • Bar feeder: FMB Minimag 20 / 3200 C • Unit 1 bar feeder year: 2014 • Unit 2 bar feeder year: 2013 Technical Specification Gedpfx As Afxqqsikebw Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2023, 19-meter AR Racking pallet rack AR Racking pallet rack with a total length of 19,000 mm, consisting of one base bay and six extension bays (2,700 mm each). Each bay has three levels (including floor storage space) with four cross beams (2,700 mm). Each bay can store 3 Euro pallets side by side and 3 pallets stacked (including floor storage space). One bay can accommodate 9 Euro pallets. Manufacturer: AR Racking Type: ARPA-S Total length: approx. 19,000 mm Shelf height: 3,000 mm Shelf depth: 1,100 mm Clear bay width: 2,700 mm Grid spacing: 50 mm End upright frame height: 500 mm Number of storage levels: 3 (including floor storage space) Number of bays: 7 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 63 Year of construction: 2023 Uprights The frames consist of two omega profiles with their corresponding connectors, post feet, and fastening materials. The horizontal and diagonal struts are made of galvanized C-profiles. The perforation The omega profile has a 50 mm spacing for the crossbeams. Sendzimier-galvanized material Crossbeams Made of cold-rolled box profile Sturdy suspension bracket for a secure connection Including two locking pins per crossbeam to prevent accidental removal Powder-coated orange Scope of delivery: 6 x AR Racking pallet rack uprights, galvanized, 3000 x 80 x 70 mm 2 x AR Racking pallet rack uprights, galvanized, 3500 x 80 x 70 mm (end upright frame height: 500 mm) 28 x AR Racking pallet rack crossbeams, orange, 2700 x 160 x 50 mm 56 x Locking pins We also offer the shelf in a smaller version. Please feel free to contact us. Gjdoxq A Dwepfx Aiksbw You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, This listing is for the Ohaus Scout Pro Portable balance Sp4 The unit is in full working condition and is ready for immediate release The Ohaus Scout Pro SP4001 is an intuitive, durable portable electronic balance designed for a wide range of laboratory, industrial, and educational applications. This balance is easy to operate with minimal instruction and offers advanced features for precise and reliable weighing. Key Features: Simple Operation: The Scout Pro digital scales are incredibly easy to operate, featuring a high-contrast LCD display that ensures readability from any angle. Durable Design: Sealed front panel, molded spill ring, and a stainless steel platform protect the balance from spills and make it easy to keep clean. Multiple Weighing Units: Includes grams, kilograms, pounds, ounces, and a combined pound:ounce display. Switch between units with just the touch of a button. Multiple Application Modes: Enhanced Parts Counting: Allows for recalculating the average piece weight. Godexv A S Sjpfx Aikobw Percentage Weighing: Ideal for comparing sample weights to a reference weight. Totalization: Allows repeated summation to the limit of the display, not just the capacity of the balance. Display Hold: Perfect for weighing large packages, only available in the Ohaus Scout Pro series. Weigh Below Hook: An integral hook allows for below-balance weighing, critical for density or specific gravity determination. USB/RS232 Connectivity: Features an easy-to-install USB or RS232 interface for quick data connection to a PC or printer, a feature unique to the Ohaus Scout Pro in this price range. Battery or AC Power: Powered by 4 AA batteries, offering up to 40 hours of operation with auto shut-off, or can be powered through the included AC power pack. Physical Lock Switch: The lock switch helps reduce operator error by locking the balance into a specific configuration. Security Bracket and Shipping Lock: Comes with an integral security bracket and a shipping lock to protect the weighing mechanism during transport. Specifications: Maximum Capacity: 4,000 g Readability: 0.1 g Pan Size: 5.6 in x 6.5 in (142 mm x 165 mm) Linearity: ±0.1 g Stabilization Time: 3 seconds Dimensions: 8.3 in x 2.1 in x 7.5 in (210 mm x 54 mm x 192 mm) Weight: 4 lb (1.8 kg) Power Supply: 4 AA batteries or AC adapter (included) Construction: ABS housing with stainless steel platform Units of Measurement: g, kg, oz, lb, lb:oz, t, dwt

Condition: used, mileage: 59,986 km, power: 125 kW (169.95 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sales excepted! Internal number: 1317. NG10263 ----EQUIPMENT * Airbag (passenger side) * Exterior mirrors, electrically adjustable, heated, and foldable - with integrated turn indicators * Load compartment floor: vinyl flooring "Easy Clean" * Package: Load compartment protection package 1 - load compartment floor "Easy Clean" - wheel arch lining - high side wall lining * Tire pressure monitoring system * High side wall lining up to the roof * Partition (metal) * Transmission: 6-speed manual * Anti-lock braking system with electronic brake force distribution (EBD) incl. - Electronic Stability Program (ESP) with traction control (TCS) - Hill start assist - Crosswind assist - Emergency brake assist - Rollover protection - Emergency brake support incl. emergency brake light * Airbag driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn indicators * Battery: battery runtime, battery runtime programming to 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, high * Double-wing rear door with 256° opening angle, (without window) without rear window, with locking magnets * Rev counter * Third brake light * Front power windows - with quick-down/up function for driver's side * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * Generator, high-performance version * Headlamp low beam: halogen headlights with daytime running lights * Glove compartment with lockable lid * Interior lighting with delay function with reading lamps at the front * Air conditioning at the front incl. dust and pollen filter * Fuel tank 70 l * Paint finish: solid paint finish * Load compartment lighting * Steering wheel: synthetic leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Emergency assistance call system Godpfe Ahu Tkjx Aiksbw * Technology package 9 - front windshield, heated - windshield wipers with rain sensor - front and rear parking pilot system - active emergency brake assist (camera-based) - lane keeping assist with drowsiness detection and automatic high beam, additionally with lane departure warning - headlight assist with day/night sensor - cruise control - fog lights - Ford audio system * Particle filter: diesel particulate filter * Radio: Ford audio system with radio and DAB+ - radio (FM/AM) - digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - MyFord Dock - FordPass Connect - speakers, antenna - audio remote control on the steering wheel - Bluetooth interface - USB port - hands-free system * Sliding door entry light automatically when door opens * Sliding door: sliding door, right * Rear mud flaps * Side protection strips * Power steering * Safety belts - seat belt tensioners and force limiters at the front * Seat package 13 - driver's seat, 4-way adjustable (forward/backward, backrest, seat cushion tilt, height) - double co-driver seat with storage compartment under individually foldable seat cushions - headrests, height-adjustable - tray integrated in the double co-driver seat (fold-out) - interior armrest for driver - lumbar support, manual (driver's seat) - seat cover: fabric * Start-stop system * Partition (plastic) at the height of the B-pillar * Rear bumper with integrated step * Recirculation mode * Lashing eyes * Immobilizer * Heat-protective glazing, slightly tinted * Central locking with re

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg Godpfxjqlck No Aikjbw - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Gsdpfx Aehk Dfrsikjbw Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: used, Fresenius Pilot A2 Syringe Pump Gbedpfx Ae Af Uumsikew You are bidding on an original Fresenius Vial Pilot A2 syringe pump (often also referred to as a perfusor). This is a proven, highly precise medical table and stand device for the continuous and precisely dosed administration of medications and infusion solutions. In everyday medical practice, the device is used for the continuous, precisely controlled administration of highly effective medications, anesthetics, or infusion solutions via standard syringes. The device features a clear control panel, a digital display for rate indication, and automatic safety and alarm functions. Thanks to the pre-mounted, robust original bracket on the back, the pump can be quickly and securely attached to infusion stands, intensive care beds, or standardized medical rails. Features: - High flexibility: Automatic detection and compatibility with common 20 ml and 50 ml Luer-Lock syringes (pre-settings for BD Plastipak, Braun Perfusor, and Monoject can be read directly on the housing). - Clear control panel: Wipe-resistant, hygienic foil keyboard with a clear digital LED display for accurate rate indication. - Comprehensive safety system: Visual and audible pre- and main alarms for occlusion, incorrect syringe positioning, power failure, or low battery. - Mobility: Integrated battery for bridging patient transport or sudden power failure. Technical data: Manufacturer: Fresenius Vial SA (Vial Medical) Model: Pilot A2 Device type: Infusion syringe pump (perfusor) Syringe compatibility: Suitable for standardized 20 ml and 50 ml Luer-Lock syringes Flow rate adjustable: from 0.1 to 400 ml/h Accuracy: ± 1% (drive mechanism), ± 2% (syringe) Power supply: Mains operation: 230 V ~ 50/60 Hz Battery operation: Integrated battery (for power failure/transport) Power consumption: Max. 23 VA Dimensions (H x W x D): Approx. 120 x 330 x 155 mm Weight: Approx. 2.2 kg Housing material: Robust, impact-resistant polycarbonate Safety features: Audible and visual alarm systems (e.g., for occlusion/pressure, syringe positioning, power failure, or low battery) Year of manufacture: 2014 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!