Used Core Drilling Machine for sale (83,918)

Condition: new, functionality: fully functional, Drilling capacity in steel St 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Boring capacity in St 60: 30 mm Thread cutting in ST 60: M 16 Thread cutting in GG 20: M 20 Short spindle: MK 3 Spindle stroke: 140 mm Throat: 293 mm Column diameter: 115 mm Machine table – usable surface: 514 x 360 mm T-slot quantity – width – spacing: 2 x 14 x 224 mm Distance spindle-table min./max.: 132 / 724 mm Feed: manual Spindle speeds – stepless: 100 – 1,800 rpm Total power requirement: 1.0/1.6 kW Machine weight approx.: 260 kg Standard equipment: - Mushroom pushbutton (latching) for emergency stop - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Stepless speed adjustment - Digital speed display - Protection class IP 54 - Plug connector (pre-installed) - Spindle guard with electrical interlock Gsdsx Sqt Sjpfx Admjtt - Paint finish: DD textured varnish signal white RAL 9003, Pantone 7545c, black Special equipment: Pos. 12 LED machine lamp with radially adjustable light beam, connection power 230 V, protection class IP65

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Gtodpfx Adex E Ingomjt Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min Gjdpfx Adsxz Aygjmjtt * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: excellent (used), functionality: fully functional, SELECT 33300 Drilling machine for wooden stairs. To drill the banister holes in string boards and hand rails. The machine has a hydraulic feed regulation (no splintering of the holes) 400 VAC , 1,5 kW, 6 Bar. The drilling device can turn 60 Degree to the leftr and to the right. Gtjdpfx Aovl E Tbjdmot The drilling tool can be clamped by a collet. Line laser for positioning of the workpiece.

Condition: used, Year of construction: 1960, arm length 1600 mm tool adaptor ja fabric-no. 9787 weight 4,6 t Gtodpfx Adjx Ik Unjmot with drill cube

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Drilling specifications: Godpfxjxgnhao Admjtt - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Condition: new, functionality: fully functional, Drilling capacity in St 60 40 mm Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Short spindle MK 3 drilling stroke 120 mm throat 293 mm column diameter 115 mm machine table - usable support 514x360 mm T-slots number - width - distance 2 x 14 x 224 mm distance spindle-machine table min./max. 117/701 mm feed rate 0,10 + 0,20 mm/rev. spindle speeds 160-2,250 rpm Total power requirement 1.45/1.9 kW machine height 1840 mm Machine weight approx. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right/left rotation Gsdsifkpwjpfx Admett - motor protection switch - Speed adjustment stepless - digital speed display - feed overload protection - protection class IP 54 - Connector plug (ready mounted, cable length 2 m) - Spindle protection with electrical fuse

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Gedpsx Tpytefx Admett

Condition: excellent (used), Year of construction: 2018, Radial Drilling Machine KNUTH R 40 V Year of manufacture: 2018 Very little used Clamping cube Digital depth display Technical Data: WORKING AREA Drilling capacity: 40 mm Tapping capacity, cast iron: M 40 Tapping capacity, steel: M 32 Max. drilling depth: 260 mm Machine table dimensions: 2050 mm x 920 mm x 180 mm Gtedpfx Adoxdw Ukemjt Cube table dimensions: 620 mm x 450 mm x 450 mm Arm reach: 300 mm - 1300 mm Distance spindle nose to table surface: 300 mm - 1200 mm Vertical arm travel: 640 mm Column diameter: 280 mm TRAVEL Horizontal travel of drilling head: 1000 mm MAIN SPINDLE Speed range: 54 rpm - 2150 rpm Spindle taper: 4 MT FEED Feeds: 0.1 mm/rev - 0.63 mm/rev DRIVE POWER Main drive motor power: 2.2 kW Lifting motor: 1.1 kW DIMENSIONS AND WEIGHT Dimensions (L x W x H): 2.07 m x 0.85 m x 2.43 m Weight: 2300 kg

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2013 Equipment and technical data: - Interchangeable drilling gears for: - Line boring - Hinges - Mounting plates - Connecting fittings - Front fastenings - Line boring gear can be used rotated by 90° - Pneumatic hold-down device - Drilling gear system for quick change of vertical drilling modules - Vertical drilling gear: Motor power 1.6 kW - Vertical drilling gear: Speed approx. 2,780 rpm - Power supply: 400 V, 3-phase, 50 Hz - Maximum drilling depth / Y-adjustment: approx. 550 mm - Extraction connection: 100 mm Dimensions: approx. 940 x 1560 x 980 mm Weight: approx. 125 kg Gtedpfx Ajxwz Nxsdmet Availability: approx. mid/end of January 2026 Location: Hesse

Condition: excellent (used), Complete Red Baron with 3 drilling heads Godpfxoxl Ecle Admjtt

Condition: good (used), Year of construction: 1998, Versatile frame dowel and slot boring machine with angle adjustment Especially designed for staircase construction, window manufacturing and universal applications thanks to pneumatic height adjustment. Angled doweling and baluster drilling are easily achieved via the rotatable drilling unit. Motor with pole switching, two speeds Motor power 1.0 / 1.5 kW, 1,400 and 2,800 rpm Motor started via convenient handle switch With Röhm two-jaw chuck 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can be rotated 65 degrees left and right Pneumatic height adjustment for processing, doweling possible on two levels without repositioning. Desired drilling heights for each drilling level can be set via digital counter; switching between levels is pneumatic and operated from the front. Cross adjustment 340 mm, stepless or in 12 mm increments, with indexing bar Pneumatic clamping possible at any position, operated from the front Maximum height adjustment approx. 100 mm above table level Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps 1 clamp column can be moved to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round bar Assortment of drill bits Operating manual CE marking Machine has been partially repainted due to presence of paint splashes. Pneumatic hoses replaced Gtedpjxmatnefx Admjt Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "More offers from this seller."

Condition: good (used), Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B13 -Table size: 300 x 1100 mm -Protrusion: 150/180 mm -Spindle stroke: 50/70 mm Gedpfxob A Ikis Admstt -Weight: approx. 200 kg

Condition: used, bore capacity in steel (diameter) 40 mm Godpfxsx H Ak Se Admett throat 385 mm bore stroke 200 mm spindle taper MT 4 turning speed range 61-1169 U/min table: 470 x 560 mm weight of the machine ca. 700 kg dimensions of the machine ca. 900x800x2000 mm

Condition: good (used), Description Radial drilling machine with MK 5 spindle and 2000 mm arm reach, hydraulic clamping. Technical data: Spindle taper: MK 5 Maximum drilling capacity in steel / cast iron: 65 / 70 mm Maximum thread cutting in steel M 50 / cast iron M 60 Quill stroke: 370 mm Arm reach: 490 to 2000 mm 12 spindle speeds from 35 to 1890 rpm 6 automatic feeds: 0.07 - 0.96 mm/rev Column diameter: 432 mm Motor power: 5.5 kW - 400 Volt Total power approx. 9 kW Base plate dimensions: 2920 x 1140 mm Machine dimensions (L x W x H): 2980 x 1140 x 3470 mm Height to top of column: 2960 mm Gtedpfex Rdapox Admet Distance spindle to base: 1900 mm Weight approx. 6600 kg Features: Hydraulic clamping Precision ground gears Automatic tool ejector Arm drop safety device Forward and reverse operation Accessories: Coolant unit Automatic tool ejector Cube table - 1000 x 800 x 500 mm Work lamp Additional product information Price and availability upon request Spindle taper MK 5 Arm reach from 1600 mm Drive type: Gear drive

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, pressing device, Gsdpfx Aovtm Ayodmjtt stop rulers

Condition: used, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U spindle taper MT 4 weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds Godpfx Asx Iwgqodmjtt

Condition: excellent (used), Year of construction: 2019, HOMAG DRILLTEQ C-600 (BHT500) Portal machining center with fully automatic workpiece feed, for processing workpieces made of wood or wood-based materials. - powerControl System WoodWOP / WINDOWS 7 Gtsdpfx Adjx Rt Dkjmjt - 21.5-inch full HD TFT display - Vertical drilling units with up to 38 drilling spindles - Horizontal drilling units with up to 21 drilling spindles, individually selectable - 2 grooving saw units in X direction - Workpiece dimensions: Length 250-2500mm / Width 100-1400mm (or 2x600mm) / Thickness 12-60mm - Five-sided machining possible - Barcode reading system - Year of manufacture: 2019 - Immediately available

Condition: good (used), Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) Gtjdsb A Hd Hjpfx Admet -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm Godpfx Ajwid Uwodmjtt drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer is an equipment package. Gtjdpfeu R Tftjx Admet The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: used, bore capacity in steel (diameter) 40 mm Gjdpfx Adjx Iwgkjmott continious capacity 25 mm throat 315 mm bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t emergency stop switch renewed

Condition: excellent (used), Year of construction: 2017, HOMAG CNC Throughfeed Drilling Machine BHT500 + TSH 501 Gantry machining center with fully automatic workpiece throughfeed, designed for processing workpieces made of wood or wood-based materials. - Powercontrol system WoodWOP - 17-inch TFT display - Vertical drilling units with up to 38 drilling spindles Godpfxex Rt Ats Admott - Horizontal drilling units with up to 21 drilling spindles, individually selectable - 2 grooving saw units in X direction - Workpiece dimensions: Length 250-2500mm / Width 100-1400mm (or 2x 600mm) / Thickness 12-60mm - Five-sided machining possible - Barcode reading system - Year of manufacture: 2017 - Immediately available

Condition: used, Year of construction: 1998, Technical details: Gtsdou Idutepfx Admet bore capacity in steel (diameter): 15 mm bore stroke: 100 mm threading: M16 number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm 2x quick chuck 10mm *

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - pneumatic clamps, foot control, 2 drilling beams with 15 spindles each ----- Technical specifications ----- Number of spindles: 30, Drill spindle spacing: 32 mm, Motor power: 2 x 0.75 kW, Voltage: 400 volts, Pneumatic connection: 6 bar, Dimensions without stop ruler: 850 x 1,100 mm, Gtedpowmmt Rsfx Admet Weight: 240