Used Conveyer Bellt for sale (71)

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Iisdpfx Aaew Sfg Escoh Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: used, Year of construction: 1982, 1 Combi-Filter Seitz, type Orion 100 Year of construction: 1982 Output: 100 hl/h complete with beer pump, conductivity measurement, dosing vessel, Control cabinet, switching panel, KG collecting pan with conveyor and disposal pump. Filterarea kieselguhr appr.: 35 m² Filtration capacity: 100 hl/h Length: 5200 mm Width: 1320 mm Height: 2250 mm Formats: 1 m x 1 m filter plates Material: Stainless steel Iedpjxbpayofx Aacjih Position: Horizontal Base construction: Frame filter Features: Hydraulic filter compression; altguhr conveyer: up to 200 Filter sheets or 55 kieselguhr plates and 56 filter sheets

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Transport Pallets / PICKING LINE - TYPE OF PALLETS = WOODEN PALLETS - DIMENSIONS TO BE HANDLED = 1200X800 mm conveyable on rollers Iiedpfxoxivqnj Aacoh 600x800 mm conveyable in the loading section for hooding Picking line composed as follows: 1. Motorized Roller Conveyor for Pallets • Conveyor height: h=550 mm, adjustable ± 60mm. • Photoelectric cell group and reflector mounted on adjustable supports and protected by galvanized steel upper cover. Qty: No. 35 CONVEYOR L 6000 MM No. 4 CONVEYOR L 3000 MM No. 15 CONVEYOR L 2000 MM 2. Motorized Roller Turntable from 0° to 90° Qty: No. 2 3. PALLET TRANSFER SHUTTLES - Shuttle: single pallet position, roller conveyor • Shuttle cart with track guide: capacity for 1 loaded pallet (roller transport). • Useful transport length Lu = 1500 mm. Quantity: 1 Pallet shuttle: rail for recessed installation Quantity: approx. 15 m Pallet shuttle: onboard electrical panel Quantity: 1 Pallet shuttle: position detection Quantity: 1 Pallet shuttle: end blind bar Quantity: 1 Pallet shuttle: blind bar Quantity: 3 Pallet shuttle: anti-collision device PLS (proximity laser scanner) Quantity: 2 4. PICKING AREAS: - Motorized Roller Conveyor for Pallets • Conveyor height: h=550 mm, adjustable ± 60mm. Qty: No. 4 CONVEYOR L 3000 MM No. 5 CONVEYOR L 1500 MM - 90° Transfer consisting of a 3-chain motorized conveyor L=1600 mm as follows: Fixed section of transfer: 3-chain conveyor; Qty: No. 2 - Pallet Conveyor: 3-chain motorized type Qty: No. 8 Useful transport length Lu = 3000 mm Qty: No. 4 Useful transport length Lu = 1500 mm 5. PALLET WRAPPING AREAS: - Motorized Roller Conveyor for Pallets • Conveyor height: h=550 mm, adjustable ± 60mm. • Photoelectric cell group and reflector mounted on adjustable supports and protected by galvanized steel upper cover. Qty: No. 1 CONVEYOR L 1500 MM No. 3 CONVEYOR L 2000 MM No. 1 CONVEYOR L 3000 MM - Motorized Roller Turntable from 0° to 90° Qty: No. 1 ELECTRICAL AND AUTOMATION SYSTEM FOR PALLET CONVEYORS The automation for the conveyors consists of an independent electrical control panel designed for the supervision and management of the above-mentioned conveyor systems. The electrical panel is manufactured in painted steel. Its components are logically and functionally arranged; on one side there is the main switch with operator panel and PLC controller, while on the other side all the drive control components for the motors are located. The system consists of hardware and software completely designed by Forpac; the hardware is built using components from leading manufacturers on the market, while the software is programmed taking into account all the specific requirements of the plant to be automated.

Condition: new, Year of construction: 2025, Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): max. speed of the machine in neutral: 10cycles/min; max. product dimensions LxWxH: 1500x1300x600mm; length of sealing blade: 1800mm; chamber dimensions LxBxH: 2000x1800x800mm; conveyer height: 850mm+/-50mm; power: 380V, max. 63kW; compressed air: approx. 6-8bar; machine dimensions and weight: sleeve packer L2418xW2100xH2132mm, 1300kg, shrink tunnel: L3000xW2200xH2090mm, 1600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Isdpfov Nl Rbjx Aacoih

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Iiedpjwr T Ewofx Aacjh Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 2999 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 2600 mm 250 mm with mm-scale and magnifier on stop carriage rolls and table with manual measuring system and a rigid flat steel guide stop carriage 6-fold ball bearing mounted, manually slideable and fixable fold up material stop FURTHER LENGTHS: 2 meter € 2.480,- 4 meter € 3.839,- OPTIONS: material depth stop arm sprung and adjustabel up to the Ijdpfx Ajwirnloacoih mechanical zero (man. dischargeable by eccentric lever SZ 05 € 493,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 114,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. (sample photo)

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Iiodew R T Diepfx Aacoh Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: excellent (used), Fully automated Loghouse milling machine Blockhausfräse BL100ADT for economic production of components used in modern log cabin construction up to maximum dimension 140 x 200mm. Due to the efficient production method with automatic Optimization and multiple lengths (Multilog System) the output from this machine is very high. During each working shift can be produced up to 1200 metres of components for average sized, individual houses. High performance spindle drives and climb milling ensures a clean cut milling contour without being frayed. Iodpfxexn Irho Aacsih  Belt conveyer loading system, where the operator puts onto the raw material.  Infeed table with Servo pushing system for fully automated workpiece transport and positioning.  Blockhausfräse BL100 with the working units, drill, wind notch, main notch, log dovetail / straight connection groove head, crosscut saw.  Outfeed table with the pneumatic unloading device.  Workpiece deposit support, where the operator takes off the finished Logs.  Operator panel with IPC for software and machine control.

Condition: good (used), Webster & Bennett CNC Ram Type VTL Year 1986/2005 Table 1500mm dia. 10 Station Automatic Tool Changer Max Turning Dia 54” Fanuc Oi-TC Control Fully Enclosed Guards Isdpfjtv Nm Dox Aacoih Automatic Tool changer Tooling Table Jaws Swarf Conveyer

Condition: new, Year of construction: 2025, Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications sleeve packer: max. speed of the machine in neutral: 20 cycles/min; max. product dimensions: L(unlimited)xW(W+H max. 600mm)xH(max. 300mm); film width: max. 1600mm; length of sealing blade: 700mm; operating temperature: up to 200°C; conveyer height: 850mm+/-50mm; power: 220/380V, max. 1.8kW; compressed air: approx. 6-8bar; machine dimensions and weight: L2014xW1488xH1850mm, 600kg. Technical specifications shrink tunnel: max. product dimensions: L(unlimited)xW400xH300mm; operating temperature: up to 400°C; conveyer height: 850mm+/-50mm; power: 220/380V, max. 20kW; chamber dimensions: LxBxH: 1500x600x400mm; machine dimensions and weight: L2400xW900xH1690mm, 500/550kg. Iiedpfov Nl Rhsx Aacsh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed Iedpfx Aoukvgreacsih ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 4241 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm Iiodpfxswirnro Aaceh 2550 mm 250 mm digital readout adjustment by handwheel pneum. brake material depth stop with 12 times ball bearings on generous large dimensioned guiding profile FURTHER LENGTHS: 2 meter € 3.515,- 4 meter € 4.945,- OPTIONS: Measuring systm with 1/10 mm readout Z 58 with magnetic polring and sensorhead SZ 09 € 844,- material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 505,- pneum. arm retraction (10 mm discharge stroke) of sprungmaterial depth stop (SZ 05) SZ 07 € 422,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 117,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Dual Chamber During Oven 1,700 x 1,400mm (2,40m2) Process area based on largest substrate; 4.1. Process area (minimal); 1,700 x 1,400mm (2,40m2) 4.2. Substrates are (non-) heat treated, (non-) TCO coated optical white (or standard) float glass sheets with straight or pencil edges and (non-) edge delete patterns (1) 4.3. Substrates are rectangular shaped (2) general Iiedpfx Aasv T I Iqsceh Electrical diagram (see appendix 1) Main power supply voltage 3x400 ± 5% + earth, 50Hz ± 5% Control voltage 230Vac 50Hz and 24Vdc Main fuse 140A Engine power Circulation fan motor 2.2 kW (2 pcs.) Drive motor vertical transport 0.39 kW Drive motor horizontal transport 0.09kW 1.5.3 Heating system Heating Heating type Electric with closed tube elements Power 30 kW per room Overall, the system consists of two parts, viz: - The furnace consists of two chambers each with an air circulation fan and adjustable air inlet. - The conveying system consists of a trolley with vertical and horizontal movement. The oven is suitable for curing heat treatments under air atmosphere with cleanroom classification in the temperature range from 50ºC to 250ºC. One heat cycle per chamber can be programmed. The cart can place glass from the conveyer position into one of the two chambers where the products undergo a selected heat cycle. And then removed from the oven and placed back in the conveyor position.

Condition: excellent (used), Fully automated Loghouse milling machine Blockhausfräse BL100ADT for economic production of components used in modern log cabin construction up to maximum dimension 140 x 200mm. Due to the efficient production method with automatic Optimization and multiple lengths (Multilog System) the output from this machine is very high. During each working shift can be produced up to 1200 metres of components for average sized, individual houses. High performance spindle drives and climb milling ensures a clean cut milling contour without being frayed.  Belt conveyer loading system, where the operator puts onto the raw material.  Infeed table with Servo pushing system for fully automated workpiece transport and positioning.  Blockhausfräse BL100 with the working units, drill, wind notch, main notch, log dovetail / straight connection groove head, crosscut saw.  Outfeed table with the pneumatic unloading device. Iijdpfx Aajwqxxmecoh  Workpiece deposit support, where the operator takes off the finished Logs.  Operator panel with IPC for software and machine control.

Year of construction: 2019, condition: ready for operation (used), Length: 5650mm, width: 2960mm, height: 1850mm, with documentation, without lifting device and roller conveyer, an inspection is possible. Iisdpfx Aajp R R H Isceh

Condition: excellent (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: PT-ZNY 155, film width: 440 mm, type of input current: three-phase, pressure: 8 bar, total width: 1,400 mm, total length: 7,000 mm, total height: 1,800 mm, input voltage: 400 V, compressed air connection: 7 bar, temperature: 150 °C, operating temperature: 30 °C, Equipment: safety light barrier, Packing vacuum machine (for cheese and other food products like minced/shredded). Working principle depends on the systematic process of heating, forming, filling, sealing and cutting stations. Simply cup form is provided from pet film at heating and forming stations, final cheese blocks after molding are inserted (filled) in formed cup as demanded capacity at filling station, after providing sealing between bottoms . Foil which is pet foil and top foil which is prompt at sealing station. Then the cup is cut in width and length at cutting station. Finally finished good product blocks vacuumed are carried on product exit conveyor which is being provided by thermoform machine. Iiedjv Sr Nvjpfx Aacsh This machine was designed and bought as brand-new equipment. The equipment was received in May 2021, commissioned in Oct 2021 and worked not more than 2 months and not every day. It has around 200 working hours including tests. We stopped the activities with this equipment in 2022 because it was necessary to choose for our products a new way of vacuum packing. This machine didn’t need any other specific maintenance due to the short time frame working period. As for the accessories, this have the cooling station , a conveyer for making product blocks to be easily placed in the packing forms ; and including some forms for packing. About the service history, it is not the case due to the small amount of working time. Width of film foil: Upper 370mm (thickness 0.06 mm) ; Bottom 415mm (thickness 0.25 mm) Forming depth : 90mm Transporting 12 nests with 2.3kg/nest (as our product had) Machine capacity: designed for 8.000-12.000 pcs/hour (differs by model of machine) Cooling with water: 15-20°C, 100 lt/hour Air pressure: 6 bar, 1200 lt/min Electrical load: 7kw, 400v, 3 phase Dimension: 3500 x 1200 x 2000 (differs by model of machine)

Condition: good (used), functionality: fully functional, Elu AS 70 with roller conveyers. Iisdpfsw Nxcujx Aaceh

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 1781 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 250 mm supply- and removal roller table with lateral guidance FURTHER LENGTHS: 1meter € 978,- Iisdowiq Spjpfx Aacsh 2 meter € 1.235,- 4 meter € 2.158,- 6 meter € 3.356,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. (sample photo)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, HEGLA cutting line: 1.Shape Cutting Table : Hegla Galactic 3728 2.Positioning conveyor : Hegla TW 4126 3.Breakout station : Hegla STB II 26 K 4.Breakout table : Hegla LKB 5033 The Galactic float glass cutting system gives excellent repeatable cutting accuracy with dynamic acceleration! The Galactic float glass cutting machine with electromagnetic linear drives has a highly dynamic movement. In conjunction with the high resolution measurement system, these linear drives – without mechanical gears – set benchmarks in precision. Continual minimisation of wear. Iodpfxjwlccfe Aacoih Rely on our wealth of experience with Magnetic Linear Drive technology for your Dynamic Cutting Process! HEGLA Linear drive = Designed for the future Optional loading section: 1.Portal loader & turning table 2.Paper removal system 3.Loading conveyer with tilting arms 4.Infeed conveyer cutting line

Condition: good (used), Year of construction: 2014, Machine will be delivered without conveyer belt and weighing. Iiedpfswt Tuhjx Aacsh

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. Iiodpfx Aaeh A Hbxjcjh The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product.

Condition: new, neu Iiodpfx Aswiq Iqoacoh ca. 14 - 16 Wochen ab Auf Türkei 29800 € 569.18 € Doppelsäulenführung 5400x41x1,3 mm 20-100 m/min 450 mm 425 mm 695 x 425 mm rund 430 mm, quadrat 425 rund 320 mm, quadrat 290 690 mm 0.55 kW 4 kW 0.12 kW 3090 mm 1200 mm 1940 mm 1630 kg double linear guides hydraulic-mechanical bandtension saw bandbrush infinitely variable cutting speed sensitive cut regulation bi-metal saw band 41 coolant device thermal overload protection heavy duty gear optical height adjustment 3 ° inclined band hydraulic clamping of the vice user manual in GERMAN or ENGLISH OPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting line

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Gemy 6 is the straight edging machine with 6-cup wheels, with innovative design and technology. It executes high quality work on thickness up to 35 mm and is equipped with an NC that, among various functions, also automatically adjusts the speed of the machine according to to the thickness to be processed. Thanks to the use of ABS covers it proves exceptionally soundproof and safe due to the complete acoustic and electrical insulation. . Ergonomic and easy to use Multifunctional NC Central lubrication ABS covers Possible regulation of the amount of glass to be removed (0÷5 mm with a 0.25 mm step) Front regulation of the wheel that executes the back arrive Stainless steel casing and tanks Technical data: Workable glass thickness: 3 ÷ 35 mm Min. workable dimensions: with corner chamfering (15 mm) 45 mm Without corner chamfering 35 mm Max weight allowed per meter of conveyance: 200 kg/m and total load 350 kg Working speed 0.5 ÷ 5 m/min Pneumatic feed: pressure 6 bar Water tank: 1 x 360 liters Total power installed: Kw 16.5 Total length (L) 6700 mm Machine width (W) 1300 mm Total height (H) 2300mm Height of working plane ≈ 840 mm Total weight (with empty water tank): 2600 kg Numerical control RS150 Iijdpfxowinq Ao Aacsh Operator interface CN 23 Programmable control (PLC) Integrated in the NC Screen Liquid Crystal Display (LCD) Operative keyboard sensitive keys

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 45210 € 863.51 € Schwenkrahmen 3120x27x0,9 mm 20-100 m/min 280 mm 240 mm 310x240 mm rund 230 mm, quadrat 230 rund 140 mm, quadrat 140 rund 200 mm, quadrat 170 240 mm 835 mm 0.37 kW 1.5 kW 0.12 kW 1.95 Nm 1.95 Nm 2800 mm 2000 mm 1820 mm 1200 kg CNC control with 7" touchscreen for following functions: feeding length, pieces and rotation of the bow for mitre cutting automatic feed 1000 mm / stroke variable cutting pressure Iiedewiqwxspfx Aacjh machine with speed variator coolante equipment motorizes chip brush chip conveyer automatic saw blade breakage detection hydraulic clamping vices Recommended max. diameter of solid material in automatic mode: 150 mm user manual in English or German

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 154988 € 2929.27 € 3 kW 12 mm 6 mm 6 mm 3 mm 6 mm 26,5 kW 250 mm 16 mm 160 x 160 mm 200 x 150 mm 6000 mm 58 kg/m +/- 0,2 mm +/- 0,05 mm rund, quadratisch, rechte 40 m/min 94 m/min 30 m/min 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser Iisdpfx Aaowiqr Aoceh - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request