Used Concrete Milling Cutter for sale (12,507)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Dsdpfezru Uksx Aa Hecl Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: good (used), Year of construction: 2019, 256mm maximum cutting diameter, 455mm max turned length, Dcjdpfx Aszrfnuoa Hjl 4,000rpm spindle speed, 51mm bar capacity, 12 station VDI turret, milling speed 5,000rpm, 16kW spindle motor, Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor, parts catcher, Barfeed unit.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Dodpjzmfxisfx Aa Hjcl Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals

Condition: used, diameter / mm Dcodjzcgf Ropfx Aa Hol weight / kg Type / 0

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Y-axis, cross adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Accessories / Special features: • 3-axis digital display, manufacturer HEIDENHAIN • Infinitely variable feeds with rapid traverse in the 2nd feed stage • Two working spindles for horizontal and vertical tool holders (vertical milling head does not need to be removed during machining when the horizontal spindle is in use) • Ball screw spindles for the X and Y axes, simultaneous milling in X and Y direction possible • Trapezoidal screw spindle, hardened and ground, for the Z axis (vertical) • All operating elements on one side, in the mobile control panel • Additional manual adjustment of the cross slide increases the working area of the machine, even beyond the table surface • Safety handwheels • Tool holder according to DIN 2080 – steep taper ISO 40 • Automatic central lubrication for speed and feed gears • Vertical milling head with quill, swiveling L+R Dcedjziutzepfx Aa Hol • Fixed angle table 315 x 710 with 5 slots 12 mm, spacing 63 mm • Tool clamping spindles, horizontal and vertical • Splash guard made of Plexiglas on 3 sides of the horizontal table • Coolant system • CE compliant TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), TOS CNC CONSOLE MILLING MACHINE WITH CNC CONTROL HEIDENHAIN TNC310 TYPE: FV30 MACHINE NO.: 203300233 YEAR OF MANUFACTURE: 1998 Dedpfx Aajzlg N Te Hjcl Technical data: Longitudinal travel – X-axis: 760 mm Transverse travel – Y-axis: 381 mm Vertical travel of the quill – Z-axis: 152 mm Vertical travel of the console: 450 mm Table size: 305 x 1300 mm Max. workpiece weight: 360 kg Spindle mounting: ISO40, DIN 69871 A Speed range: continuously variable, 100-4000 min-1 Drive power: 5.5 kW (7.5 kW / 5 min.) Weight: 2700 kg Equipment: - CNC path control HEIDENHAIN TNC310 - Electronic handwheel - Pneumatic tool programming - Automatic central lubrication for guides and ball screws - Coolant system, capacity 42 l - Machine light - Various tool holders - Standard accessories - Documentation - CE conformity

Condition: used, Year of construction: 2004, operating hours: 31,350 h, Bed milling machine Make: ANAYAK Model: VH Plus 4000 Year of manufacture: 2004 Spindle hours: approx. 31,500 hours Control: Heidenhain 530 Table size: 4200 x 1100 Travel: x: 4000, y: 1200, z: 1500 mm Max. spindle speed: 5000 rpm Max. feed rate: 10000 mm/min Pick-up location: Bremen The machine is in daily use, so operating hours will continue to increase. An inspection can be arranged at any time. Dcedpfey Uy Ecsx Aa Hsl Disassembly, loading, etc. are the responsibility of the buyer. A 2-ton forklift and a 5-ton overhead crane are available for "small parts." _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124. Dcodpezhxi Dsfx Aa Hol

Condition: used, mileage: 149,995 km, power: 316 kW (429.64 HP), first registration: 02/2021, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2028, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, had accident, Internal vehicle number: FG56907_Request Available immediately at our yard in Kaufungen. More information at: Dcjdpfx Aaezx Iz De Hol * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Subject to errors. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5300 mmVertical traverse Y: 1050 mmTransversal traverse Z: 1500 mmVertical capacity (VC): 80 - 1130 Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X,Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: UndeterminedMachine weight approximate: 43000 kgMachine dimensions approximate: 11560 x 6150 x 3538 mm Accessories Guarding: 2 front sliding doorsAutomatic tool changer: ATC40Chip conveyor: 2 longitudinals hinge typeElectronic handwheel: HR-410Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Dcjdsugbrqepfx Aa Hjl

Condition: like new (used), Year of construction: 1998, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Dcjdpfx Asyf Rqpsa Hsl Technical features Dimensions Table dimensions: 7650 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis X axis traverse: 5850 mmY axis traverse: 1200 mmZ axis traverse: 1500 mm Milling head Head type: NEW Auto-indexing head UDG (every 2,5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,6 kW Feedrates Rapid feedrates (X,Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: 4000 kg/m2Machine weight approx.: 31000 kgMachine dimensions approx.: 11590 x 5179 x 3485 mm Accessories Guarding: new perimetral wire-mesh fenceAutomatic tool changer: ATC-30Chip conveyor: rear longitudinalElectronic handwheel: New HR-510Coolant: external internal high pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm turning length 150 mm c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW Number of working hours 35000 h total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Djdpfozdk Evsx Aa Hecl Accessories: a large number of tool holders in total 104 off, 24 of them are driven tool holder

Condition: used, Rotor width: approx. 300 mm Djdpfx Aezy Hipoa Hocl Rotor diameter: approx. 300 mm Stator knives: 6 Rotor knives: 9

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Drive: 160.0 kW Djdpfx Aaezy Hmbo Hscl Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Dcedpfozy Hmzjx Aa Hjl Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Year of construction: 1993, machine/vehicle number: H 3391, power: 7 kW (9.52 HP), equipped with 1 four-roll feed unit - Wegoma, Vario 3 Information: small motor not functioning large motor, 7 kW, is running Dcsdpjzy Hp Asfx Aa Hsl

Condition: good (used), Deckel FP1 milling machine with 3-axis Heidenhain digital display, fixed angular table, and SK 40 spindle mount. Accessories: counter supports, various collets. In good, operational condition. Can be demonstrated under power by arrangement. Dcsdpfx Aozy Hnlea Hsl

Condition: used, Year of construction: 2021, Universal tool milling machine Manufacturer: FPS Model: 620 M-NC Year of manufacture: 2021 - workshop inspected Machine No.: 00 7020 Approx. 1,200 operating hours for the spindle Geometric acceptance with test report Accessories and installed options: - 3D control system SIEMENS 840D sl - Portable electronic handwheel - LED machine light - Machine type switch via key switch to machine tool type, manually controlled milling machine. With the machine open, the manual operation mode and the electronic handwheel can be used. The functions of axis movement and speed control are possible without having to continuously press the enable button. The machine type switch only affects the vertical machining. - Mechanical safety handwheels with scale in all axes - Orientated spindle holder, vertical and horizontal with cycle for thread cutting without a collet Dsdpfxjzy Eqrs Aa Hocl - Fixed table 820 x 420 (T-slot: 14 mm) - Tool holder, vertical and horizontal SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system, free-standing, 80 liters - Splash guard cabin, moving with the machine with sliding doors and foldable, electrically secured - Control panel mounted on the lower frame and swiveling - CE documentation in printed form and on USB stick - CE declaration of conformity Used, as is The machine is technically in the condition of its year of manufacture.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, SPINNER TC300-52 SMCY – CNC turning center, year of manufacture 2012 including bar feeder Spinner Servo-Load 80-1500 and tool package Availability: expected November/December 2026, as soon as the replacement machine is delivered. The machine is currently in continuous production and operating at full capacity – inspection while running and under power can be arranged at any time by appointment. It has been running continuously in a single-shift operation. Operating hours: will be recorded and provided here. General - Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH, Sauerlach - Type: TC30052SMCY | Machine no. AZ0145 | Year of manufacture 2012 - Control system: Siemens Sinumerik 840D sl, ShopTurn - Connection: 3/PE ~ 400 V, 50/60 Hz, I_B 34 A, I_N 35 A - Weight approx. 3,700 kg | Dimensions approx. 2.0 × 1.6 × 2.0 m Working area - Max. swing diameter approx. 300 mm - Max. turning diameter approx. 250 mm - Max. turning length approx. 400 mm - Travel ranges X 180 / Y / Z approx. 500 mm - Rapid traverse X/Z 15 / 24 m/min Turret 1 - Max. 5,000 min⁻¹ | 15 kW (S1) | 95 Nm (S1) - Bar capacity 52 mm | C-axis Turret 2 (counter spindle) - Max. 7,000 min⁻¹ | 6 kW | 38 Nm | C-axis Tool turret - 12 tools, VDI 25 - 12 rotary tool stations, max. 6,000 min⁻¹ - Power 5.9 / 2.2 kW (S6 40 % / S1) - Torque 14.75 / 9.5 Nm (S6 40 % / S1) Dcsdpfx Ajzx Subea Hjl Operating supplies - Coolant tank approx. 150 l | Hydraulic tank approx. 11 l | Central lubrication approx. 2–3 l Bar feeder SPINNER Servo-Load 80-1500 - Original Spinner, factory-matched to the machine - Bar length up to 1,500 mm, diameter up to 52 mm - Servo-electric, separate control panel, including guide tubes Scope of supply - Counter spindle, C-axis, Y-axis, driven tools - Bar feeder Servo-Load 80-1500 - Chip conveyor, chip tray, coolant system - Tool cabinet with driven and static holders, boring bar holders, collets - Complete documentation Pictures and a video of tools, documentation and scope of supply will follow in the next few days. Terms and conditions Sale of a used machine from ongoing production, as is, without any warranty. Price net ex works plus VAT. Dismantling and transport can be organized upon request. Technical data according to the original manufacturer's documentation. Equipment and condition without guarantee, to be checked on the machine before purchase. If you have any questions or would like to arrange an inspection, please feel free to contact me at any time.

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm Djdpfx Aaezyu Ums Hscl max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Deckel FP 1 MK Aktiv TNC 113 Year of manufacture: 1991 Spindle speeds: 40 - 2000 rpm, SK 40 Dodezy Rlnspfx Aa Hscl Travel ranges: X 300, Y 160, Z 340 Stepless feed rate + rapid traverse in all axes Weight: approx. 880 kg Accessories: fixed angular table (optional universal table), electric central lubrication system, direct collet chuck set, 8 tool holders SK 40, machine vise Röhm, coolant system, machine feet, chip tray, documentation. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, guides in perfect condition. Of course, the machine can be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: used, Year of construction: 2000, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control Heidenhain spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 16 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Dcodpfx Aaezy Sibe Hjl Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, mileage: 139,189 km, power: 290 kW (394.29 HP), first registration: 04/2021, fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2028, color: white, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2021, Equipment: ABS, air conditioning, Internal vehicle number: FG04840 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 3340 8x4 Concrete Mixer Intermix P10C UL | 10 m³ | Euro 6d For sale: a used Mercedes-Benz Arocs 3340 8x4 concrete mixer with an Intermix P10C UL body, manufactured in 2021. The vehicle features a 10 m³ mixer drum, automatic transmission, and air conditioning. Technical specifications: * Manufacturer/Model: Mercedes-Benz Arocs 3340 * Vehicle Type: Concrete Mixer * Body: Intermix P10C UL * First Registration: 04/2021 * Year of Manufacture: 2021 * Mileage: 139,189 km * Power Output: 290 kW (394 hp) * Engine Capacity: 10,677 cm³ * Cylinders: 6 * Fuel: Diesel * Transmission: Automatic * Emission Standard: Euro 6d * Environmental Badge: 4 (Green) * Number of Axles: 4 * Axle Configuration: 8x4 * Drum Volume: 10 m³ * Permissible Gross Weight: 35,000 kg * Unladen Weight: 13,800 kg * Payload: 21,200 kg * Color: White * Air Conditioning * Technical Inspection: New Dodpfx Aezk Suxja Hecl * Vehicle Number: FG04840 * Condition: Used * German Vehicle Inspection is possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change. Financing example: * Internal Number: FG04840 * Purchase Price: €89,500.00 * Down Payment: 10% * Term: 60 months * Monthly Payment: €1,390.02 * Residual Value: €16,380.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Errors and omissions excepted. We gladly accept your used vehicle in trade. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), Table milling machine Martin T 25. Dcjdpfxjy Srtmo Aa Hsl

Condition: good (used), Stegherr 2 motors, each approximately 2.2 kW Dcodpfxozakw Ee Aa Hel Connected load approximately 4.5 kW Compressed air 6 bar Voltage 380 V, 50 Hz