Used Compact for sale (3,942)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 8,289 h, load capacity: 7,000 kg, lifting height: 3,200 mm, fuel type: gas, mast type: simplex, construction height: 2,750 mm, fork carriage width: 1,600 mm, fork length: 1,600 mm, empty load weight: 10,700 kg, total length: 3,450 mm, drive type: Treibgas, construction width: 1,550 mm, Compact forklift - LPG Pgsdpfx Aou Dztxeg Djw Load center of gravity: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 355-65-15 Rear tires type: Superelastic Rear tires size: 2.50-15 Description: In addition to this Mora model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this M70C P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Heating, full cabin,

Condition: used, Year of construction: 2011, machine/vehicle number: 902881, Weights Empty weight: 6.700 kg Pgodpexhb Uiefx Ag Djw Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Solideal Max. horizontal reach: 760 m Transport dimensions (LxWxH): 5.95x1.75x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, General information: Oil-lubricated screw compressor for compressed air supply. Pjdpfxjxzuhco Ag Dsgw Technical data: Drive motor: 5.5 kW Max. operating overpressure: 8.0 bar Rated speed: 2950 rpm Operating voltage: 400 V, 3-phase, 50 Hz Rated current: 14 A Ambient temperature: 3–45 °C Option: K1_T2_C48 Refrigeration dryer: Model: ABT 15 Material no.: 1.8102.5 Max. operating overpressure PS: 16 bar / 230 psig Compressed air inlet temperature: 3–60 °C / 37–140 °F Ambient temperature: 3–45 °C / 37–115 °F Refrigerant system: Refrigerant: R-513A Quantity: 0.35 kg / 0.77 lb Global warming potential (GWP): 631 CO₂ equivalent: 0.221 t / 487 lb Max. operating overpressure HP PS: 21 bar / 300 psig Max. operating overpressure LP PS: 16 bar / 230 psi No options

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Psdpfertq I Ejx Ag Degw Year: 2010 with gas flushing including 4 format sets Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.

Condition: used, Electric Forklift Truck OM PIMESPO Type XE 25 ac Counterbalance forklift, electric forklift, compact forklift Serial No. SES23X9-10 – Manufacturer No. F14024W00609 Year of manufacture 2008 Rated capacity 2500 kg Pgjdpfx Aget Ac Erj Djw Capacity at 500 mm load centre 2500 kg Lift height 4340 mm Overall height 2220 mm (container compatible) Mast height 2220 mm Free lift 1600 mm Fork length 1150 mm Fork width 100 mm Fork thickness 40 mm (actual 38 mm - at heel 35 mm) Fork carriage width 1030 mm Operating voltage 80 Volt - 4-wheel, superelastic, solid rubber tires front 23x9-10 / rear 18x7-8 - Hydraulic power steering - Triplex free lift mast - Sideshift - Overhead guard - Drive battery HAWKER, 80 Volt, 560 Ah, year of manufacture 12/2022, supplied with automatic charger - Operating hours counter shows 2969 hours - New UVV safety inspection by TÜV (additional cost 150,-- EUR net) Length without forks 2400 mm Overall width 1190 mm Own weight with battery 4800 kg Good condition

Condition: refurbished (used), functionality: fully functional, Foldnak Compact with landscape format and extended delivery table. A flawless Ernst Nagel / Hohner Foldnak Compact is being offered. This model can be quickly converted to landscape format with just a few simple adjustments. Paper sizes from 105 mm x 210 mm up to 325 mm x 604 mm can be processed without any issues. The Foldnak Compact combines booklet making and front trimming in one machine. It accommodates a wide range of formats with short setup times, making it ideal for small, medium, and frequently changing paper sizes in both digital and offset printing environments. The Foldnak Compact features a built-in trimmer that presses the booklet spine before trimming. Its patented stapling and folding mechanism ensures precise staple positioning every time. Additionally, the Foldnak Compact comes standard with a side and front jogger to ensure all pages are perfectly aligned before stapling and folding. A particular advantage for digital print shops: the Foldnak Compact operates independently of any printing press, making it the perfect offline addition. It is an ideal solution for printers requiring speed and flexibility. Specifications: - Maximum thickness: 25 sheets of 80gsm (100 printed pages) - Sheet size min / max: 105 x 210 mm – 325 x 450 mm - Landscape: up to 325 x 604 mm Podpjxy Impofx Ag Dsgw - Staple heads: 2 as standard, up to 4 maximum - Both flat and loop staples possible - Staple types: 26/6, 26/8 and 24/6 Ri - Speed: Up to 2,000 booklets per hour - Dimensions: 86 x 103 x 71 cm (without delivery table) - Weight: 240 kg / 230 Volt. Test run possible / Shipping possible / Collection possible.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 9,183 h, load capacity: 7,000 kg, lifting height: 6,000 mm, fuel type: gas, mast type: simplex, construction height: 3,700 mm, fork carriage width: 1,485 mm, empty load weight: 10,150 kg, total length: 3,000 mm, drive type: Treibgas, construction width: 1,480 mm, Compact Forklift - LPG Load Centre: 600 Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Superelastic Front Tyre Size: 355/65-15 Rear Tyre Type: Cushion Rear Tyre Size: 645/250-410 Pgedpfxowtt Dpo Ag Djw Description: In addition to this RMF model, we have around 200 heavy-duty forklifts, compact forklifts, fork trucks, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Hire purchase and financing on favourable terms are always available. We also buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner Mr. Peter Sawitzki will gladly provide you with detailed advice on this KSL70G. P.S.: Our certified forklift workshop specialises in repair, maintenance, overhaul and custom builds for forklifts from 8 tons upwards. We are also happy to display your vehicle for consignment sale in our facility.

Condition: used, Year of construction: 2016, machine/vehicle number: 2010703, Empty weight: 3.070 kg Lifting capacity: 350 kg Working height: 1.400 cm Pjdjt Uyd Aopfx Ag Dogw Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 2.5x1.2x2.7 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Psdpfx Aswm Rqtog Djgw Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gasnozzle sensing, seam tracking, point editor, CTMS, Manax C bow construction for robot in a fixed position Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator Pgjdpfx Aew R T Twsg Dsw delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !!

Condition: used, machine/vehicle number: CE11xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 21000 Description: Haulotte scissor lift is being sold as a repair item. Last inspection was carried out in 2021. Owner says wiring needs to be replaced. Ready for delivery. Own weight: Model: Compact 10N 0864 Pedpfx Aewzg A Iog Djgw

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LMC-623C, working width: 230 mm, planing height: 150 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 150 mm, total width: 1,600 mm, total height: 1,800 mm, total length: 3,500 mm, overall weight: 4,500 kg, power of feed motor: 7,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, extraction nozzle diameter: 125 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: electric, workpiece height (max.): 150 mm, compressed air connection: 6 bar, type of input current: three-phase, workpiece width (max.): 230 mm, input voltage: 415 V, tool diameter: 200 mm, table length: 2,000 mm, warranty duration: 12 months, shaft diameter: 40 mm, number of spindles: 6, extraction connection diameter: 125 mm, power: 74.5 kW (101.29 HP), input frequency: 50 Hz, product height (min.): 10 mm, product width (min.): 15 mm, Equipment: motor brake, The Leadermac LMC-623C Compact is a heavy-duty 6 spindle planer moulder (4-sided moulder) built for precision and high-volume production. It offers a working range from 15 mm to 230 mm in width and 10 mm to 150 mm in height, making it versatile for a wide variety of timber sizes. This machine is equipped with powerful Siemens IE3 motors, centralised lubrication, and pneumatic side pressures to ensure smooth operation, fast setup, and long service life. The 2000 mm infeed table with fence provides stable feeding, while hardened chrome bed plates and safety interlocks guarantee durability and operator protection. Psdpjxlfd Njfx Ag Djgw Highlights: 6 precision spindles, 40 mm, 6000 rpm Motor powers up to 20 hp per head (total installed 74.5 kW) Variable feed speeds 6–24 m/min (option to 30 m/min) Pneumatic chip breakers & pressure pads with digital readouts CE certified, dust extraction Ø125 mm A compact footprint with industrial-level performance — ideal for joinery workshops, moulding production, and manufacturers needing a reliable 4-sider.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 15 h, load capacity: 10,000 kg, lifting height: 6,720 mm, free lift: 2,240 mm, fuel type: electric, mast type: triplex, construction height: 3,430 mm, fork carriage width: 1,520 mm, fork length: 1,700 mm, empty load weight: 19,137 kg, total length: 3,700 mm, drive type: Elektro, construction width: 1,650 mm, Compact forklift - electric Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: New Front tires type: Bandages Rear tires type: Superelastic Rear tires size: 2.50-15 non-marking Battery Volt: 96V Battery Ah: 1680Ah Battery year of construction: 2024 Description: In addition to this Montini model, we also have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage. Installment plan & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this MR10. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, heating, full cab, full free lift, camera Pgedpfju Dztlox Ag Dew

Condition: used, Year of construction: 2018, operating hours: 1,552 h, Equipment: all wheel drive, All-terrain 4x4 scissor lift, powered by a KUBOTA 3-cylinder engine, working height approx. 12.15 m, load capacity approx. 450 kg, platform length: 2500 mm, platform length with extension: 3700 mm. The vehicle may be wrapped and/or lettered with advertising. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! The vehicle may be wrapped and/or lettered with advertising. Our general terms and conditions of delivery and payment apply. Pedpfx Aewzfwqog Dogw We are happy to provide a financing or leasing offer for this unit. Please contact us!

Condition: used, Year of construction: 2008, functionality: fully functional, punching force: 28 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 750 mm, punching diameter: 105 mm, throat depth: 750 mm, compressed air connection: 6 bar, stroke length: 90 mm, Equipment: safety light barrier, Compact 750 x 2000 CNC / Revo - Year of manufacture: 2008 - Trumpf tooling system - Head 1: Standard / RevoTool Pjdpfsw S E U Ajx Ag Dsgw - 90 mm punching stroke - X-axis: 2000 mm Y-axis: 750 mm - 2-axis CNC Labod control - Repositioning device - Brush table - Standard hydraulics

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning Podpfx Aexvbu Ejg Dogw 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: like new (used), Year of construction: 2024, Technical specifications: Filtration flow rate: approximately 90 l/min Fluid compatibility: neat, mineral, or synthetic oil; aqueous fluid (emulsion or synthetic) Pollutants: Carbide, Cermet, PCD, HSS, Precious Metals, Cast Iron, Ferrous and Copper Alloys, Aluminum, Ceramic, Plastic Filtration threshold: 5-10 μm nominal depending on the cartridges used Dimensions: 1,000 x 1,090 x 1,545 h Advantages: Reduced surface area Plug & Play solution Easy access for maintenance Pgjdowahrhopfx Ag Djw No compressed air required Filtration and temperature stabilization on 1 m² of surface area Suitable for all machines requiring no more than 100 l/min of coolant

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations) Podpfx Ajhp N R Isg Degw

Condition: used, Year of construction: 1995, grinding length 400 mm grinding width 200 mm workpiece height 300 mm table adjustment - longitudinal max. 420 mm table cross movement max. 190 mm distance spindle center to table 90 - 415 mm table speeds 2 - 28 m/min table load max. 150 kg cross feed of table intermittent 3 - 20 mm rapid traverse cross 7 mm/min rapid traverse vertical 180 mm/min grinding wheel size ø 225 x 25 x ø 51 mm total power requirement 7 kW weight of the machine ca. 1,5 t Pgedpfxsxu Ntge Ag Dsw dimensions of machine L x W x H 2,20 x 1,46 x 2,10 m Accessories: magnetic plate 400 x 200 mm, grinding wheel with flange, balancing scale, 1 flange separate, 2 grinding wheels separate, DRO on Y-axis, wet grinding attachment

Condition: excellent (used), Year of construction: 2002, Main functions of the machine: Previously used for sealing and shrinking pharmaceutical products in cartons, in a cleanroom environment. Manufacturer: KALLFASS GmbH & Co, Germany Year of manufacture: 2002 Infeed conveyor dimensions: 1000 x 400 mm Fully automatic side sealer, model Universa 400 Standard Roller conveyors Needle and pinch perforation Fault detection Infinitely variable speed control: 0–35 m/min Shrink tunnel, model Compact 650 S Roller conveyors Automatic cooling system Outfeed conveyor dimensions: 2000 x 400 mm Frequency inverter/speed control Electrical connection: 3 x 400 / 230 volts, 50/60 Hz Pgjdpjxy R Tlefx Ag Djw Connected load: 14.5 + 6.0 kVA Total current: 29.6 A Main fuse: 40 A Control voltage: 24 V Dimensions: approx. 6.2 x 2.1 x 1.4 m (H) CE certified Condition: Pre-owned In very good, clean condition according to the current operator The current operators report stable and reliable shrinking behaviour Original price in 2002: CHF 200,000 Availability: Immediately Prices in EUR, ex works floor (Switzerland), excluding Swiss VAT; Swiss VAT not applicable on export from Switzerland.

Year of construction: 2002, condition: ready for operation (used), Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible. Pgodpsxx Ud Esfx Ag Djw

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Psdexvbw Hepfx Ag Dogw Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: good (used), functionality: fully functional, Price reduction!!! For mitre cuts to the left up to 45° For sawing steel, stainless steel, and limited aluminium profiles Automatic cooling directly onto the saw blade 24 V safety switch in the handle with restart protection Total weight 38 kg = easy to transport Saw blade included Accessories: Pgjdoxx Dcwjpfx Ag Dow Table with clamping device

Condition: used, Year of construction: 2018, Horizontal bandsawing machine Make: JAESPA Model: Compact 2.8 Year of construction: 2018 TECHNICAL DETAILS: Automatic band saw - horizontal Cutting diameter 280 mm Saw blade length 5080 x 34 x 1.1 mm Cutting area flat 330 x 280 mm Cutting width 330 mm NC control Feed 460 mm Cut-off lengths 9999.9 mm Speed 15 - 120 m/min Machine weight approx. 2.3 t Dimensions approx. 3250 x 1580 x 2050 mm Pgedjudb Sfepfx Ag Dow Column design for heavy-duty, industrial use o Intuitive NC control of the machine via PLC WAGO and 7" color touchscreen. Frequency-controlled, infinitely variable belt drive Saw arm with highly sensitive feed movement via servo motor and ball screw ball screw Backlash-free linear guides in both columns Hydraulic material clamping with long-stroke cylinder in front of and behind the saw blade saw band Clamping vice and lifting jaws open on both sides with infinitely adjustable clamping pressure clamping pressure Material feed via servo motor and ball screw drive in chain dimension the repeating operation is clocked. Unlimited material feed length Fully hydraulic saw blade tensioning Automatic saw blade guide arm adjustment Fully equipped with chip conveyor

Condition: used, mileage: 138,400 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, maximum load weight: 880 kg, first registration: 12/2019, loading space length: 2,000 mm, emission class: euro6, color: white, number of seats: 3, Year of construction: 2019, DEK:[10344651] - Used Truck: Citroen Jumpy Van XS / L1, 3 seats. - Year: 2019, Engine: 1.5 BlueHDi 100 hp Euro 6d, 6-speed manual transmission, Mileage: 138,400 km. - Van / 3-seater, Short wheelbase L1, Load compartment length: 2,000 mm, Partition opens for long loads, 6 load securing hooks. - Equipped with: Air conditioning, Radio-Bluetooth with USB, Front and rear parking sensors, Central locking, Blind spot indicator, Cruise control, Fog lights, On-board computer, Two keys, Spare wheel, Driver and passenger airbags. - Bodywork in fair condition, Interior intact, Mechanics fully functional. - Note: Front drive shafts are noisy. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:00 - Certified mileage. - Test drive available by appointment. - Ownership transfer at our office. - Tailored financing options available. Carlo Mauri Srl declines all responsibility for any unintentional inconsistencies in the advertisement, which does not constitute any contractual obligation. Prices shown are excluding VAT and registration fees. Pgodpfx Agoxz D Avs Djw