Used Cnc Boring Machine for sale (64,529)

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm Bodpfx Agsf Ncadszjld track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch with cutting table

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Blsdpfxjxy Tmno Agzod

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Bledpfjxy Tlwex Agzsd

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: OE-70109, grinding length: 2,500 mm, grinding wheel diameter: 760 mm, grinding spindle speed: 2,200 rpm, workpiece spindle speed (max.): 500 rpm, clamping length: 2,600 mm, tailstock quill stroke: 60 mm, No reserve price – guaranteed sale to the highest bidder! Bidding commits you to collect the item within the stipulated period, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Maximum grinding spindle speed: 2,200 rpm Workpiece spindle speed: 20–500 rpm Maximum workpiece swing diameter: 850 mm Maximum grinding length: 2,500 mm Maximum clamping length: 2,600 mm Maximum workpiece weight: 500 kg Maximum grinding wheel diameter: 760 mm Grinding wheel bore diameter: 304.8 mm Peripheral speed: 45 m/s Blodpfx Ageym Axnszod Workpiece spindle mount: Morse taper 6 Tailstock stroke: 60 mm Grinding headstock: X-axis infeed Z-axis traverse MACHINE DETAILS Control model: FANUC SERIES OI-TF Operating voltage: 400 V Frequency: 50 Hz Rated current: 3 x 100 A Connection: 63 kVA Dimensions & Weight Dimensions (L x W x H): 5,000 x 4,500 x 2,900 mm Machine weight: 9,000 kg EQUIPMENT Manufacturer XACTOOLS robot cell with loading unit EPSON industrial robot, maximum payload: 8 kg Vibratory feeders Documentation External reference: Lot 35 / Blickle

Condition: ready for operation (used), Year of construction: 2002, Immediately available from facility closure: Bljdpfx Agjypbkhozsd CNC Horizontal Machining Center MAZAK Type FH 5800 The machine is sold with all tools, pallets, and tool magazines. CNC control Mazatrol PC Fusion CNC 640 M Travel paths X/Y/Z: 710/610/660 mm Table indexing: 360 x 1 degree Pallets: 6 units Pallet size: 400 x 400 mm Spindle: SK 40 Tool magazine: 120 positions Spindle speed: 35 – 15,000 rpm Knoll high-pressure cooling system Chip conveyor Weight: 15 tons Offered at a price of EUR 18,000 plus VAT ex location

Condition: not inspected (used), Year of construction: 2000, operating hours: 26,350 h, functionality: unexamined, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: MILLPLUS, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates timely collection either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Max. spindle speed: 12,000 rpm X-axis feed rate: 20 – 15,000 mm/min Y-axis feed rate: 20 – 15,000 mm/min Z-axis feed rate: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Bledpfxsym Auco Agzod Rapid traverse Z-axis: 40 m/min Linear encoder resolution X-axis: 0.001 mm Linear encoder resolution Y-axis: 0.001 mm Linear encoder resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Positioning tolerance Y-axis: 0.010 mm Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage control: 350 mm NC rotary table clamping surface: 630 mm diameter T-slot spacing: 63 mm Number of T-slots: 9 Centering bore: 50 mm diameter Max. table rotation speed: 10.7 rpm Table feed rate: 3,600°/min Table encoder resolution: 0.001° MACHINE DETAILS Control: MILLPLUS Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Recorded spindle hours: 26,350 h EQUIPMENT 60-position automatic tool changer Chip conveyor Coolant system Note: The machine can be transported on a truck with a width of 3,000 mm. External reference: Elos – Lot 6

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 780 mm, 1 used, very well-maintained High-precision CNC jig boring machine SIP MP 600 Machine year: 1995 – Retrofit in 2007 with HEIDENHAIN Bledpfou Titzsx Agzod iTNC 530 and complete geometric overhaul. Table: 1100 x 700 mm – clear passage between columns: 750 mm Hydrostatic spindle diameter: 130 mm – 1/1,100 micron runout Retrofit to HEIDENHAIN CNC, 3-axis interpolation. Readout accuracy of the boring spindle under 1 micron – hydraulic weight and load compensation in the crossbeam. Fantastically preserved machine, which we are happy to demonstrate under power at our warehouse. Price (Domestic, plus 19% VAT) ex stock Delivery time: immediate – subject to prior sale and errors. Payment: as customary in trade, net in advance before collection. Technical data non-binding – subject to change and errors.

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Blsdpfeygtcqex Agzsd Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 27 Total number of tool changer positions: 8

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Blodpfex T Ddyjx Agzsd Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 620x560x1720 mm Bodpfxov A Hm Re Agzjld Weight 110 kg Total power requirement 0 kw

Condition: excellent (used), Year of construction: 2002, CNC Machining Center DECKEL MAHO DMU 80 T Year of manufacture: 2002 Control: Heidenhain iTNC 530 Spindle: replaced on 14.11.2018, approx. 17,000 hours Bedsylk Syspfx Agzold Technical data: Travel paths: X: 880 mm Y: 630 mm Z: 630 mm Controlled B-axis in milling head: -15° to 90° Spindle speed: 12,000 rpm Tool changer capacity: 32 positions Tool holder: SK 40 Coolant system: available

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Bedpfsyha Atsx Agzeld Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping Blodpfx Aeu Tln Nsgzjd - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Bedpfxow Dccco Agzeld

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Blodpow Dcb Sofx Agzjd

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Bedsty A Ehjpfx Agzold Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Year of construction: 2001, condition: excellent (used), machine/vehicle number: PB 04 02.01/1070, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Bledjidqtlopfx Agzed

Condition: excellent (used), machine/vehicle number: 70218, Equipment / Additional information: Bsdpjpithaofx Agzjld Various tools Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), machine/vehicle number: 85039, Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm Blsdpfx Ajth U E Esgzsd

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 1767, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Bedpopitfxsfx Agzsld

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg Bledoxclfzopfx Agzsd

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bledpfxoxtmqto Agzod

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Center height: max. 190 mm Center distance: max. 580 mm Turning diameter: max. 200 mm Longitudinal slide travel (Z-axis): max. 450 mm Cross slide travel (X-axis): max. 160 mm Spindle bore through draw tube: 51 mm Spindle bore at front bearing: 100 mm Spindle speed: max. 5000 rpm Feed rate for X and Z axes: mm/min Rapid traverse rate X-axis: 30 m/min Rapid traverse rate Z-axis: 30 m/min Feed force X and Z: 4500 Nm Turret: 12 stations Driven tool stations: 6 stations Tool holder: cylindrical, VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Bodpfx Asyk Hrgegzsld Spindle drive motor power at 40% duty cycle: max. 16.5 kW Electrical connection: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis (chuck position) and C1-axis for tool turret - 3-jaw power chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - Hydraulic hollow chucking device AUTOGRIP - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 of which are driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measuring system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece remaining run-time display and part counter as large display on machine enclosure - Electrical cabinet cooling unit - 9716 total operating hours (main switch on), of which 3322 spindle hours, as read from the meter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4500 x 2600 x 2050 mm Basic machine footprint (L x W x H): 2900 x 2150 x 2050 mm (3200 kg) Chip conveyor footprint (L x W x H): 3350 x 850 x 1650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: used, Year of construction: 2017, operating hours: 20,384 h, machine/vehicle number: 20171011, 5-axis, travel paths (x/y/z): 670/820/600 mm, tool holder HSK 63, 96-position tool changer, recorded operating hours as of 05/25, 3D probe, laser workpiece measurement, rotary table Ø: 800 mm, power: 90 kVA, weight: 20,000 kg, chip conveyor SIN MIN MCG-5X, coolant pump LIS, coolant treatment, without shown machine vices, ATTENTION. Removal is mandatory on 18/19.02.2026! Bjdsyidknjpfx Agzeld

Condition: used, Year of construction: 2018, operating hours: 15,233 h, machine/vehicle number: 20180707, 3-axis, travels (x/y/z): 1060/600/600 mm, SK 40 tool holder, 40-position tool changer, read operating hours as of 05/25, spindle speed: 10,000 rpm, 3D probe, measuring axis, power: 30 kVA, weight: 7,800 kg, chip conveyor SIN MIN M1050, year of manufacture: 2018, serial no.: 646, coolant treatment system HOMEWAY PF-120, year of manufacture: 2018, without the depicted magnetic clamping plate and machine vices, NOTE: Removal only possible on 23/24.03.2026, position 123 must be removed beforehand. Bodpfx Ageyidkhszeld