Used Circuit Board Production for sale (23,441)

Condition: excellent (used), Autotherm Here we offer you a 6-circuit temperature control device. Phsdpfx Aaekn Nilj Eoa Without active refrigerating machine! According to the enclosed technical brief description: Temperature range: -40°C ... +85°C (extended temperature range -40°C...+130°C) increased heating power 27 kW instead of 18 kW with 1x temperature control included in the main line with 6x temperature measurement in the respective flow included with 6x temperature measurement in the respective return included with 6x volume flow and pressure measurement in the respective flow included with 6x volume flow and pressure control included 1l/min ... 12 l/min and 0.1 bar ... 3 bar incl. release control incl. FU-controlled pump in the main line incl. 6x 3-way valve with 6x additional overflow valve 2 ... 12 bar adjustable included preset to 2,4 bar with filling and draining device included for all circuits together/simultaneously incl. 50l integrated tank incl. pneumatic emptying function with control S7 incl. included Energy saving and cooling capacity extension: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range from +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity at a flow temperature of +20°C: 50 kW. This increases the cooling rate in this temperature range and saves energy due to the lower running time of the refrigerant compressor. (Footprint of the basic unit according to data sheet increases by approx. 0.3 m²) Assembly in Rittal bayed control cabinet: 2x TS8 800x1000x2000 mm 1x additional, closed switch box min. 600x600x2000 mm (for control/electrics) Supplied via on-site or optional cooling medium supply Flow temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h continuously controlled For cooling capacity a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale ex location! Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 700 mm, total width: 2,000 mm, total height: 1,350 mm, type of input current: three-phase, input voltage: 380 V, working width: 1,300 mm, The DRM model offers the most economic single roller coater for smaller or start-up companies looking to oil wooden floorboards. This machine is specifically designed for the application of oil and glue. The machine is fully operational without any functional defaults. The machine comes with two new glue trays. Psdexdxf Ropfx Aa Eoha Contact us for a quote, or visit our Test Center for a free demo.

Condition: excellent (used), Year of construction: 2013, URBAN CC AKS 6250-27/25 sealing and cleaning line + URBAN SV 430 cleaner. Year of production: AKS 6250-27/25 - 2013 Phedpfsqzxpcjx Aa Eoa Year of production: SV 430 - 2004

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: no 1, total height: 2,000 mm, total width: 100 mm, total length: 8,000 mm, overall weight: 1,500 kg, year of last overhaul: 2022, high capacity, packing possible from both sides. 20 rolles of plastic will follow this machine Phjdox Dtgpspfx Aa Eja

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-preserved HIT curved conveyor / for board or workpiece separation, heavy-duty design. Conveyor height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with 6x2 slat carriers. Integrated flush roller conveyor. Transfer cross conveyor, height-adjustable. Slab discharge flap. Driven by SEW geared motor with brake. Curved conveyor split and bolted in the middle for transport. Ideal upstream of a twin edger or stacking system. Psdpfx Aexl Ediea Esha

Condition: ready for operation (used), Spine enhancement with NAGEL SP PLUS SQUARE PRESS. Flat, rectangular pressing of the brochure spine by means of a special pressing system. Max. number of sheets per brochure: up to 30 sheets (80 g/m² paper) Max. output (sets/hour): Single pass 1600/hour, double pass 1400/hour Brochure formats min. (mm): 70 x 105 Psdpfx Asx Ek D Dja Esha Brochure formats max. (mm): 350 x 250 Power supply (V): 230 Volt Shingle delivery / Operating instructions included. Net weight (kg): 100 Gross weight (kg): 120 Please note: Our offers concern used machines, which may show signs of wear (such as minor scratches or yellowing).

Condition: excellent (used), Year of construction: 2023, GHS Type: VDS-S30 / VUTS-EC Vacuum Drying Oven with Vacuum Pump Year of Manufacture: 09/2023 Professional vacuum drying oven with pass-through function – ideal for cathode & anode materials The GHS VDS-S30 / VUTS-EC vacuum drying oven is used for drying cathode and anode materials in battery cell manufacturing. Additionally, it serves as a pass-through into controlled dry rooms (e.g. Podpfx Asw Ekd Dja Eeha

Condition: used, Breton Sample Line is the line for production of display samples in a wide range of materials and sizes The samples that can be produced on the Samples Line are suitable for marketing and exhibition uses. Psdpfoxdi Rwsx Aa Esha The line can process several materials: quartz, granite, marble, and porcelain stoneware.

Year of construction: 2020, condition: good (used), FFP2 Mask Machine - Mask Production Line Manufacturer: Ruhlamat Model: MPL FFP2/016 Phjdsrm R Hdopfx Aa Eja Year of manufacture: 2020 Mask Production Line for N95/FFP2 Masks Installation dimensions (LxWxH): 8921 x 1494 x 1985 mm Clearance around unit: 1500 mm all around Frequency: 50 Hz / 2.6 kVa Pressure: 6 bar Approx. weight: 2500 kg FFP2 masks are made of 3-6 layers of nonwoven fabric. This machine can produce masks with up to 6 layers. The machine consists of five stations: Station 1 = Unwinder Station 2 = Punching nose clip and embossing roller welding Station 3.1 = Printing and welding ear band Station 3.2 = Folding edge alignment Station 4 = Welding mask contour and cutting out mask

Year of construction: 2009, condition: not inspected (used), functionality: limited functionality, Plastic window frame production machine, still complete. C&C corner cleaning machine. 2-head welding machine. 2-head sawing machine. Glazing bead saw with remote control. Drilling and milling machine. Drainage milling machine. Copy router machine. Steel saw machine. All machines are operational and can still be serviced by Kaban if required. We will also facilitate contact if needed. Psdpexxnnkefx Aa Eeha

Condition: excellent (used), Double STDN pancake baking carousel system. Superb system designed for reliable high volume production of pancakes and crepes, blinis etc. Extremely hard to find on the used market. diameters can be adjusted from 30mm to 240mm and weights from 8g to 100g. New cost of this system is in excess of 500,000. We also have a continuous waffle manufacturing line for sale. Phedpfxsxlra Rs Aa Esa

Condition: refurbished (used), functionality: fully functional, overall weight: 600 kg, type of input current: AC, Watkiss PowerSquare 200 Offline / Manual Operation The machine has only processed 368,704 booklets/books. The machine is in very good condition. The Power Square is not only versatile but also extremely easy to operate and produces an unbeatable professional brochure. • Booklet maker for brochures up to 50 sheets / 200 pages with 80 gsm paper • High-performance wire stitching head (completely refurbished) • Product size: Min. feed size: 120 x 200 mm // Max.: 370 x 520 mm • Automatic format adjustment, automatic wire length adjustment • 2 new front trimming knives! • New folding rollers! • 1–6 stitches, evenly distributed on the spine. Brochures without staples are also possible. • Wire from spool: up to 291,500 stitches • The machine has been completely overhauled and operates very well without defects. • Fully automatic machine setting • Ready for immediate use / production starting from brochure no. 1 • Test run possible by arrangement, of course. • Triggered by electric foot switch or push button. • 230 Volts / 600 kg • Format from 120 x 200 mm up to 370 x 520 mm Collection possible, shipping possible, installation and instruction possible. Pedpfx Asxn Rdaea Eoha *Visit us on the internet* We have several different models available. Please note: these are used machines and may show signs of use (minor scratches or yellowing).

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors Podpjx Hh A Hofx Aa Esha _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Year of construction: 2020, operating hours: 20 h, condition: as good as new (ex-display), The mobile Kreuzmayr units are used for the processing of fruit juices on site. The fruit is loaded into the washing container with the bin tipper, transported to the grinder, crushed and then conducted to the sieve belt press. The generated juice is automatically pumped into tanks, heated to about 80° C in the pasteurizer, and then filled into Bag in Box. The following machines are built on the trailer: • Bin Tipper Kreuzmayr GKE • Wasching and Crushing Unit KWEM 2000 • Single Belt Press KEB 750 with cleaning brush • Bigger juice pan for the KEB 750 • Pomance conveyor • Stainless steel tank 530 Liter with hanging sieve • Pasteurizer Kreuzmayr PAS 1500 Liter oil • Bag in Box filler Kreuzmayr KBF 2000 special construction for mobile trailer • Accessories: like pumps, air compressor, high pressure cleaner, hoses and fittings • Trailer with canvas cover, pneumatic brake system and antilocking system Phsdpjc Rghyefx Aa Eoa The trailer has only a few operating days and is thus in a new condition.

Condition: new, mileage: 10 km, power: 355 kW (482.67 HP), fuel type: diesel, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment: Climate Package * Front chassis configuration: floor plate * XG cab * LED skylights * Reversing camera * Handles and surrounds: black. Sidewall: cab color * LED daytime running lights * Fixed cab entry * Air-sprung cab * Laminated glass with solar protection film * Central locking, 3 keys, 2 remotes * Windscreen with solar protection film * Headlamp washer system * Headlamps with height adjustment * DAF Corner View * LED headlights, cornering lights, and fog lamps * Chassis color: anthracite grey * CRYSTAL WHITE * Cab interior trim: Hexagon * Safety net on both bunks * Dashboard design: Plateau * LED interior lighting * Stationary heater with waste heat pump and timer * Interior trim color: Exclusive * Dashboard table * Leather steering wheel * Roof hatch with electric operation * Integrated stationary air conditioning * Driver’s seat: Luxury Air * Preparation for compressed air unit * Passenger seat: cinema & table, fabric upholstery * Driver’s seat with swivel base * Xtra Comfort mattress, adjustable lower bunk * Upper bunk * Automatic cab climate control * Curtains with divider curtain * Fridge and drawer * Armrests on both sides of driver’s seat * Storage compartment with drawer in center console * Accessory power supply: Standard + 2x 40 A * ECAS remote control with extended functions * Adaptive Cruise Control with FCW and AEBS-3 * Driver Performance Assistant * Wireless charging pad * Digital tachograph, VDO 1C, G2V2 version * FMS connector, extended and preinstalled * DAF Infotainment Exclusive, prep. Luxury speakers * Antennas: DAB prep., radio, 2x mobile, GNSS extra: CB * Hill Start Assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness Detection * Compliant with UN regulations R155 and R156 * Alcohol interlock, preinstalled * Lane change warning system * Reverse warning system * Load limiter 11.5 t * Axle load ratio 11.5/7.5 * Manual lift axle control * Lift axle * Rear: 20.00 t, air suspension, SR1344 * Rear axle capacity 13.00 t * Front air suspension: medium * Front: 8.00 t, air suspension, 161 N Phodpfx Aox Ef H Dja Esa * Tire pressure monitoring system * Front axle(s): 315/70 R22.5 * Driven rear axle(s): 315/70 R22.5 * 2nd driven rear/lift axle: 315/70 R22.5 * Steel wheels, silvery grey * Eco-Fuel * Idle shutdown system, 5 minutes * Automated gearbox, TraXon, 12-speed * 12-speed TraXon gearbox 12TX2210 DD, 16.69–1.00 * Emissions standard Euro 6 * Urge-to-move * Rear axle ratio 2.38 * Mechanical differential lock * Traction support 15.0 t * MX-13 engine, 355 kW/483 hp * 2-cylinder compressor without clutch * Driven rear axle with disc brakes * Pneumatic control for parking brake * ZF retarder * Front underrun protection * Spray suppression * Wheelbase 5.05 m / rear overhang 2.90 m * Rear underrun protection * LED rear lights * EAS unit right, horizontal top + 75-l AdBlue tank left * Longitudinal beams 310/7.0 mm, with internal reinf. front/rear * 750-l aluminum fuel tank left * Pneumatic coupling for trailer, turntable * Cross member D137 + Ringfeder coupling D137 * Electrical connections for trailer, 24 V/15-pin * Additional lighting socket, chassis * Side marker lights * Battery energy management * Alternator 150 A, batteries 2 x 210 Ah AGM * Front air intake * Heated fuel pre-filter * Driveline Plus Warranty: 3 years/300,000

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, Used Robotic Pallet nailing cell, the machine is in good working condotion, ready to produce, well maintained by the manufacturer and also the operating company. The machine is in a company in Písek Czech Republic Pjdpfx Ajx Ng Dbsa Esha

Condition: used, Pie production line. Idle for 10 years; It was fully operational when put into storage. Requires servicing/reconditioning before use. Currently untested. Phodsw N Rz Nopfx Aa Eja

Condition: good (used), Year of construction: 2009, Double welding and cleaning line URBAN consisting of 2 four-head welding machines AKS 6910/4 - 30 /40, one with right-hand stop, one with left-hand stop, WINDOWS control, each with a URBAN TBA transport/cooling belt, transverse table with motor for removal of individual elements, URBAN SV 815 cleaning automatic with two heads, with infeed table and rotatable outfeed table, additional station for processing of corner and scissor bearing drillings as well as milling of elements with varying widths, buffer rack with tiltable shuttle table and two additional outfeed tables. Podpfx Aajw Niqpo Eeha

Condition: excellent (used), Brochure production line Horizon SPF 20 FC 20, collating towers Horizon MC 80a, 80m, jogger PJ77. Podpewz Skqsfx Aa Eeha

Condition: good (used), Year of construction: 2005, Main components: Washing machine, scanner, inspection station, gas filling press, cork applicator, automatic sealing, water treatment. Phsdpfxsx Dtq Is Aa Eea The system dates from 2005, except for the washing machine (1992). The brushes are in perfect condition. Total length of the system: approx. 43.8 m. Condition: good, second-hand

Condition: new, power: 330 kW (448.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Adaptive Cruise Control with FCW and AEBS-3 * Lane Change Warning System * Goodyear * Emissions Standard Euro 6 * Automated Transmission, TraXon, 12 gears * Standard Component Arrangement Pjdpfx Aetv T Avja Eoha * Fuel Tank on Left * DAF Connect * Warranty Plus Driveline - 3 years - 300,000 km Options * Exterior Sun Visor * LED Headlights, Cornering and Fog Lamps * Central Locking, 3 Keys, 2 Remote Controls * Lower Step Cabin in Crystal White * Steering Wheel with Silver Accents * Door Trim: Loose Weave Fabric * Driver's Seat: Luxury Air * Armrests on Both Sides of the Driver's Seat * Passenger Seat: Cinema & Table, Fabric Cover * Dashboard Table * Cool Box or Refrigerator * Automatic Climate Control for Cabin * Parking Heater with Waste Heat Pump and Timer * Roof Hatch with Electric Operation * Accessory Power Supply: Standard + 2x 40 A * ECAS Remote with Extended Functions * Toll Preparation * Digital Tachograph, VDO 1C, Version G2V2 * Speed Limiter Setting: 90 km/h * DAF Infotainment Luxury Plus, Luxury Speakers * Antennas: DAB-Prep. Radio, 2x Mobile, GNSS Extra: CB * Wireless Charger * Reversing Warning System * Front: 8.00 t, Air Suspension, 161 N * Front Air Suspension: Medium * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * MX-11 Engine, 330 kW/449 HP, Cab Emblem: 450 * 12-Speed TraXon Transmission 12TX2210 DD, 16.69-1.00 * Rear Axle Ratio 2.47 * Mechanical Differential Lock * MX Engine Brake * Parking Brake Assistant * Wheelbase 4.60 m / Rear Overhang 2.55 m * Longitudinal Members 260/7.0 mm, Continuous Inner Reinforcement * 545-l Aluminum Fuel Tank Left, Height 620 mm * Use with Drawbar, Type Plate, up to Max Gross Vehicle Weight * Crossmember D137 + Rockinger Coupling D130 * Pneumatic Coupling for Trailer, Swivel Coupling * Electrical Connection for Trailer, 24 V/15-pin * Hard-wired Body Signals and Warnings * Side Marker Lights * Body Mounting Method BAM 1, Console Type B * Tail Lift Application * Hard-wired Steering Right, No First Right * Alternator 130 A, Batteries 2 x 210 Ah AGM * Battery Energy Monitoring Day Registration 03.12.2025 Payload: 14,390 kg Body: ZIKUN Swing-Board I Body Technical Data: Through-loading length: 7,250 mm Loading length: 7,400 mm Through-loading width: 2,480 mm Rear portal: Loading width inside: 2,480 mm External width: 2,550 mm Through-loading height inside: 2,150 mm Entry height: approx. 1,199 mm Overall height: approx. 3,549 mm Underframe: Stable lightweight construction ZIKUN Flap Swivel Mechanism Fixed Roof Powder-coated in RAL 9010 Pure White Collision protection: Welded steel buffer strips on both sides for impact protection. -- PVC mudguards on rear axle -- Holder for wheel chock + 2 chocks -- Red position lights above tail lift -- Side contour markings in white, rear in red The entire body is sandblasted, primed, and painted or powder coated in one color. Underframe and Superstructure: DAF E1980 WHTE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring telescopic rods (CRS System Ancra-Jungfalk, Dekra certified to VDI 2700 Code XL). Sliding access step Pallet protection edge left and right. Interior lighting as LED spotlights mounted at the top rear, connected to cab switch. Additional interior lighting as LED spotlights mounted at the rear. Front wall/bumper plate made of aluminum-

Condition: used, Tenoning spindle 1 St. Number of milling agregates 0 St. Spindle diameter 40 mm Small window production consisting of: W. ----- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings ----- Technical manufacturer's description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable -Protective and extraction hood with extraction nozzle diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW -Speed: 4200 rpm -Working length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screws -Protective cover and extraction hood with extraction nozzle diameter: 180 mm -Automatic brake with speed monitoring Studio table: -Swivel range +/- 65 degrees -Automatically changing counter blade (programmable) -Pneumatic clamp -High-precision electric degree display -Automatic length compensation -Counter blade for every angle setting in the cutting plane Special equipment: -Laser for workpiece positioning -Pneumatic saw position -Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools -Suction connection nozzles 2 x 120 mm -Spindle length 270 mm -Counter stop ruler with fine adjustment and turret head -Triple stroke, cycle height max. 90 mm -Glass bead cutting saw with protective and extraction hood 80 mm diameter -8 roller feed device with stand and hold-down arm, required for glass bead cutting saw setup -Pneumatically controlled pouring device for edge gear, speed 6000 rpm -2x 3kW motor -Mounting diameter 30 mm ----- 3) Oertli tool for Haberkorn and Okoma machines -1 set of wooden windows IV 68/78/88 -1 set of wood-aluminium windows IV 68/78 Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. ----- 4) Götzinger OBM Plus corner bearing and olive drilling machine -Corner and shear bearings + handle olive drilling Phedjxa Hi Nspfx Aa Eea -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x olive drill head 24 mm -1x corner bearing double head -Maco MultiMatic fitting -1x adjustable folding stop on the left with 6 stops -1x adjustable folding stop on the right with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the above machines on request! Plus packaging and shipping ----- (Technical data according to manufacturer - no gua...

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop Phjdpfov Tp D Tox Aa Esa - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Condition: excellent (used), Year of construction: 2008, Horizontal conveyor belt URBAN - TBA26/38 HQR 7 pieces for sale Pjdpetr Eqfjfx Aa Eoha Sale also possible individually

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Options: * Climate package * Chassis specification front: floor plate * Fixed cab entry * Reversing camera * Grab handle & trim: Black, side walls: cab color * LED daytime running lights * Air-suspended cab * Sleeper High Cab * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windscreen with sun protection film * Headlights with height adjustment * LED skylights * DAF Corner View * LED headlights, cornering and fog lights * Chassis color: anthracite grey * Headlight surround color: Crystal White * Bumper color: Crystal White * Lower cab step: Crystal White * Steering wheel with silver accents * Interior trim color: luxury * Middle storage compartment * LED interior lighting * Stationary heater with heat recovery pump and timer * Roof hatch with electric operation * Integrated stationary air conditioning * Driver's seat: Luxury Air * Passenger seat: Cinema & table, fabric upholstery * Xtra Comfort mattress for lower bunk * Upper bunk * Automatic cab climate control * Safety net on both bunks * Curtains with partition curtain * Refrigerator and drawer * Armrests on both sides of driver's seat * Accessory power supply: standard + 2x 40 A * ECAS remote control with extended features * Adaptive cruise control with FCW and AEBS-3 * Driver Performance Assistant * Wireless charger * Digital tachograph, VDO 1C, G2V2 version * DAF Infotainment Exclusive prep., luxury speakers * Antennas: DAB prep. radio, 2x mobile, GNSS extra: CB * Lane change warning system * Hill start assist * DAF Side and Turn Assist * Electronic stability control (VSC) * Speed limit recognition * DAF Drowsiness Detection * Compliant with UN regulations R155 and R156 * Alcohol interlock, preinstalled * Reverse warning system * Rear axle load capacity 13.00 t * Load limiter 11.5 t * Manual control for lifting device * Lifting device * Rear: 20.00 t, air suspension, SR1344 * Front axle 1, 8,000 kg, load index 156 * Rear axle 1, 11,600 kg, load index 145 * Rear axle 2, 7,500 kg, load index 154 * Front: 8.00 t, air suspension, 161 N * Tire pressure monitoring system * Steel disc wheels, silver grey * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * Emissions class Euro 6 * Eco-Fuel * Idle shutdown automatic, 5 minutes * Automated transmission, TraXon, 12-speed * Traction control (ASR) * Urge-to-move * Rear axle ratio 2.38 * Mechanical differential lock * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 Pedpjx Dptlofx Aa Eoha * MX-13 engine, 355 kW/483 hp, Cab badge: 480 * 2-cylinder compressor without clutch * Driven rear axle with disc brakes * Pneumatic control for parking brake * ZF intarder * Front underrun protection * Wheelbase 4.80 m / rear overhang 2.70 m * LED tail lights * EAS unit right, horizontal tank + 75 l AdBlue tank left * Longitudinal members 310/7.0 mm, with internal reinforcement front/rear * 620 l aluminum fuel tank left, height 620 mm * Operation with drawbar, type plate, up to max. GVW * Pneumatic coupling for trailer, swivel coupling * Crossmember D137 + Ringfeder coupling D137 * Electrical connection for trailer, 24 V/15-pin * Side marker lights * Battery energy monitoring * Alternator 150 A, batteries 2 x 210 Ah AGM * Warranty Plus Driveline - 3 years - 300,000 km First registration: 17.12.2025 Body: ZIKUN Swing Bo