Used Chiron Fz 22 W for sale (90)

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ... Ppjdpfx Ajgqg Sgelteu

Condition: excellent (used), Year of construction: 2015, operating hours: 14,000 h, Chiron Mill FX 800 machining center with 148-position background magazine TECHNICAL DATA Travel, X-axis: 800 mm Travel, Y-axis: 630 mm Travel, Z-axis: 550 mm Swivel axis: +- 120 ° Rotary axis: 360° Rapid traverse speed, X-axis: 60 m/min Rapid traverse speed, Y-axis: 60 m/min Rapid traverse speed, Z-axis: 60 m/min Spindle, max. torque: 180 Nm Spindle power: 17.0 - 47.2 kW Spindle, speed: 12`000 rpm Tool holder: HSK-A 63 Rotary table, diameter: 280 mm Ppjdpfstvz Azjx Alteu Thread and fitting hole pattern M16 x 15 H7 X 50 Load capacity: 320 kg SCOPE OF OFFER U.A: (list not exhaustive): Chiron machining center, Year of construction: 2015 Knoll chip conveyor 750 K-1/150 BMF TPF 350S high-pressure pump Renishaw RLP40Q touch probe Receiver: Renishaw RMI-Q Mechatronic flow sensor SB0500 Background magazine, 148-fold Operating documentation Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Year of construction: 1962, condition: good (used), machine/vehicle number: 162487, Suction capacity: 50 l/min Maximum operating pressure: 10 bar Compressor speed: 1400 rpm Ppjdpfjdyp R Rjx Alteu Tank: Operating pressure: 10 bar Capacity: 50 l

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: n/a, number of axes: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information. Machine Benefits Pedpfxjx Nr Iro Altopu Technical Machine Benefits • 92 tool positions hsk-a63 (background magazine) • Long part machining up to a maximum of 6000 mm • Machining of the end face (5th side) horizontally with swivel head (right/left) • Pendulum machining via center partition, max. Workpiece length 1773 mm with sk machining on both end faces (tool length 120 mm) • 4 hydraulic double vices (fixed center jaw) per pendulum section, positioning, and clamping via linear system (hydraulic release, mechanical clamping) Extra Information Additional Equipment High-speed package with Motor Spindle: 12000 rpm, 140 Nm Production Package: Scraper belt conveyor, discharge height 1050 mm Internal coolant preparation KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HP pump and variable valve Flushing gun per pendulum field Emulsion mist extraction, 2 fans each 800 m²/h Rotating viewing window left and right (1400 mm from machine center) Automatic loading doors Center partition for pendulum machining 5-Axis Milling Package Air Blast Tool Life Monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (statuses: machine on, machine running, part counter) Marposs (Brankamp) CMS100 Collision Monitoring System 3D machine model for kinematic simulation in the CAM programming system 210 bar hydraulic power unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control KOHN linear clamping system 8 KOHN Multi 2000 MFS 125/680 HD hydraulic vices Two-part operator step across the entire operating width of 6000 mm With the 3 axes x, y, z and the swivel head, the software package 5-axis milling can be used to mill shapes, e.g. a curve. The software then synchronizes the axes.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm. Additional equipment • Chip conveyor Psdpsyi Eh Defx Altspu Machine Benefits Technical Machine Benefits • Rapid feed 40 m/min • Tool magazine with capacity for 24 tools

Condition: used, 5 axis: yes Milling and turning: yes 5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Pedpfx Aljgph Rnetspu Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle 20-12.000 min.’ – 140 Nm.12.000 RPM 12,5 KW/Max 34kW Swivelling head (CNC controlled) ± 100° Low hours This machine can be inspected under power in our Warehouse Mimu Machine Tools (Italy)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Turning Spindle Collet Chuck: Hainbuch SK65 BZI Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Drive power min.: 30 kVA Psdpsyn Ncpsfx Altopu Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup.

Condition: used, Rotary indexing thread tapping machine, 8-station rotary table. 1 inspection station, 1 vertical and 1 horizontal thread tapping unit. With guide bush 1 mm pitch Chiron, thread tapping unit with guide bush 0.7 mm pitch, M4. One discharge station, coolant system. Ppedpfoyl Ntpox Altsu

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, Chiron Mill 6000 / 2013, completely overhauled by Chiron. Year of manufacture: 2004 / overhauled in 2013. Equipped with Siemens 840D control system. Travel X/Y: 6000/630 mm. Pendulum machining possible. 92-position tool changer. HSK-A 63 tool holder. Spindle speed up to 12,000 rpm. Spindle replaced in 2021. NC swivel milling head. Hydraulic unit with 210 bar. 2 hydraulic clamping circuits. Separate clamping pressure control per pendulum field. Clamping pressure monitoring. Pneumatic workpiece stop. 2 separately controllable pneumatic lifting devices. Brankamp collision monitoring system. Scraper belt conveyor. OKZ prepared. Knoll vacuum rotation filter. Rotating viewing window. Automatic loading doors. 5-axis milling package. IKZ 70 bar (internal coolant supply at 70 bar). Oil mist extraction. Pendulum machining possible. Pendulum machining X-axis travel: 1773 mm with face machining (tool length: 120 mm). Linear clamping system with 8 vices. Psdpfow N Nvfsx Altjpu

Condition: used, Year of construction: 2014, x-travel 2000 mm y-travel 630 mm z-travel 550 mm Control Siemens 840 D total power requirement 7,5 - 22,5 kW weight of the machine ca. 10,5 t Maximum table load:1,000 kg / m table length Movement range: X-axis:2000 mm Y-axis:630 mm Ppjdoyan Rcjpfx Altsu Z-axis:550 mm Speed range up to:12,000 min-1 Maximum speed range:140 Nm Drilling power:average 42 mm (with insert drill) Milling power:600 cm³/min Tool places:24 Tool shaft:HSK A 63 DIN 69893 Tool average:max. 75 mm Tool average with: free neighbouring places:max. 160 mm Tool length:max. 320 mm Tool weight:max. 8 kg (max. magazine load 100 kg Tool change time:approx. 1.5 s (depending on control

Condition: ready for operation (used), Year of construction: 2004, A machining center Chiron, which was completely overhauled in 2013, is available. Travel path X/Y: 6000mm/630mm, rapid traverse: 60m/min, tool positions: 92, tool holder: HSK-A63, speed: 12000rpm, torque: 140Nm, milling axes: 5, weight: approx. 20000kg, control: Siemens S840D, operating hours: 77344h. Includes scraper belt conveyor, OKZ preparation, Knoll VRF 250 vacuum rotary filter, high-pressure pump (70bar), emulsion mist extraction (2x800m³/h), central partition for pendulum machining, hydraulic unit (210bar), and Kohn linear clamping system with 8x hydraulic vices Multi 2000MFS 125/680 HD. Documentation available. An on-site inspection is possible. Psdpsw Nyi Nsfx Altepu

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840D solution line, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 630 mm Travel Z-axis: 550 mm Rapid traverse speed: 60 m/min Spindle speed: 12,000 rpm Clamping area: 3,600 x 710 mm T-slots: 5 Number of axes: 3 Tool magazine: 40 positions Traverse path in pendulum mode per work area: 1,250 mm MACHINE DETAILS Ppedpsyfgf Nsfx Alteu Control: Siemens 840D solution line Machine weight: 9,600 kg EQUIPMENT 24-position tool magazine Coolant system 900 l High-pressure system 30 bar Internal coolant supply tools Chip conveyor Hydraulic unit 200 bar 6 hydraulic connections for 200 bar 2 connector couplings A+B (3 per table side) Variable Chiron clamping logic Prosin Plus tool breakage monitoring for diameters > 3 mm Automatically opening and closing loading door Machine preparation for 1 x NC axis

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, Chiron MILL 2000 Machining Center For sale is a Chiron MILL 2000 machining center from 2006. The machine is in good condition and ideally suited for the machining of large and long workpieces. Manufacturer: Chiron Model: Mill 2000 Podoxcpy Nspfx Altspu Year of manufacture: 2006 Technical specifications: • Travel: X 2000 mm / Y 500 mm / Z 550 mm • Spindle: 12,000 rpm HSK 63 • NC swivel head • Tool magazine: 40 positions (chain magazine) • Control: Siemens • Machine weight: approx. 9,600 kg Equipment: • 40-position tool magazine • Chip conveyor and coolant system • NC swivel head • High-pressure system Condition & Service: The machine is fully operational and available immediately. Loading and transport can be arranged. Location: Germany (Stuttgart area) Price: negotiable

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, The following automation is also being auctioned from the same location: Psdpfx Aoyfum Usltopu System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Tool holder: HSK 63 Spindle speed: 12,000 rpm Number of tool positions: 65 MACHINE DETAILS Control: Siemens 840 D Spindle hours: approx. 16,000 h EQUIPMENT Knoll chip conveyor Knoll paper belt filter Blum LaserControl laser measuring system Renishaw digital 3D touch probe Automation interface Automatic door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Pjdpfsymnykex Altspu Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.