Used Casadei for sale (81)

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Ihodpexnqyhefx Ag Ust Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Iodpfxsmzbr So Ag Usht Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Year of construction: 2017, condition: as good as new (ex-display), Technical data: - max. dimension (WxH )finished part 180x105mm - working width min. 23mm - working height min. 6mm - length min. single workpiece 300mm - Feed speed 6 - 12m / min. - Spindle speed 6.000 rpm. - Spindle diameter 35mm - Usable length horizontal spindle 190mm - Usable length vertical spindle 120mm - Adjustment feed table and infeed guide 10mm - Tool diameter horizontal spindle 100mm - Min./Max. Tool diameter vertical spindle 100/124mm - Profiling possibility vertical spindle 12mm - Aggregate adjustment range for planing heads +/- 1mm - Motor power horizontal spindle 7,5 kW Ihedoii Rxgopfx Ag Uot - motor power vertical spindle 7,5kW - motor power feed 0,75 / 1,1 kW - Supply voltage 400V - phase (n) 3 - Mains frequency 50Hz - Length material feeding table 2300mm - Diameter feed rollers - diameter suction hoods 1x150mm, 2x120mm

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Iodpjurwy Njfx Ag Ueht

Condition: as good as new (ex-display), Year of construction: 2023, Spindle tiltable: Yes -45 to 45° Height adjustment: electric Pivot adjustment: electric Iedpfsgr Ufpex Ag Ujht Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop indicator: mechanical counter spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg

Condition: as good as new (ex-display), Year of construction: 2014, Exhibition machine Year of manufacture 2014 Cutting length 2600 mm Cutting width 1270 mm Cutting height at 90° = 130 mm Height adjustment electromotive saw blade diameter 400 mm swivel adjustment 0 - 45° electromotive motor 7 kW speeds 3000/4000/5000 rpm Control: display with separate keyboard swiveling control panel at eye level USB interface 300 programming memory locations electronic position display at the parallel fence cross section frame with parallelogram -manual adjustment Ihjdpfx Aekwha Eog Ust -angle adjustment +50 -50° with digital display -length and angle measurement automatic star-delta switch Original price 25950.- Availability: short term Location: Switzerland

Condition: new, Robust craftsman’s machine with a spindle moulder tiltable 45° on both sides and MK4 interchangeable spindle. Stable steel and cast iron construction. Dynamically balanced milling unit anchored to the worktable. Exceptionally robust build. Smooth operation due to precision components and high intrinsic weight. Standard features include reversible rotation (left/right) with electronic interlock when changing direction. Five speeds from 3,000 to 10,000 rpm. Speed change is operated easily and conveniently from the machine's side. Comes as standard with MK 4 interchangeable spindle system. Large grey cast iron worktable for sustained precision. Easy handling via controls and speed display on the machine's front. Large-dimensioned milling fence with fine adjustment and aluminium fence jaws included as standard. Fence adjustment via hand crank with numerical digital display of spindle height in 0.1 mm increments. Powerful industrial motors. Delivery includes: Ihedpfx Aexnqx Rog Ujt Technical Data: Dimensions and Weight: Weight (net): approx. 510 kg _____ Dust Extraction Connection: Extraction port diameter fence: 1 x 120 mm Extraction port diameter machine: 2 x 80 mm _____ Worktable: Worktable length: 2,500 mm Worktable width: 810 mm Table height: 923 mm _____ Setup Information: Space requirement details: dimensions take into account maximum travels or working lengths. Working area length: 3,700 mm Working area width/depth: 5,000 mm Note: Please add these working area dimensions to the space requirement to determine the recommended free installation area for the machine. _____ Equipment: Milling fence: heavy-duty professional design with aluminium fence jaws and fine adjustment, adjustable from the front via hand crank with numerical digital display. Arc milling safety guard: YES Spindle height adjustment: manual Spindle tilting adjustment: manual Control: manual height and angle adjustment of the milling unit Position of controls: on the machine body Table features: table extension left and right and pull-out workpiece support (total width 2,500 mm) _____ Electrical Data: Supply voltage: 400 V Mains frequency: 50 Hz Drive motor power: 7.0 kW _____ Milling Spindle: Spindle tilt: -45 to +45 ° Usable spindle length: 140 / 180 mm Clarification of usable spindle length: for spindle Ø 30-35 / for spindle Ø 40-50 mm Milling spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm _____ Max. milling tool diameters: Max. sinkable tool diameter: 320 x 60 mm Max. profile milling diameter: 250 mm Max. tenoning diameter: 350 mm Max. contour milling diameter: 160 mm

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89-57-59, total width: 600 mm, total height: 800 mm, total length: 1,400 mm, planing width: 310 mm, height adjustment type: mechanical, overall weight: 243 kg, number of planer blades: 3, Types: FS 31, Machine no.: 89-57-59, Year of manufacture: 1989, Power: 3/380V/50Hz, Motor: 2.2 kW, 4.9 Amps. Countershaft, Max thickness: 200 mm, Machine dimensions: 1400 x 600 mm, Weight: 243 kg. Ihodpfx Aow Apu Asg Uet

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00021322, total width: 1,820 mm, total height: 1,960 mm, total length: 1,650 mm, working width: 1,100 mm, overall weight: 1,160 kg, power: 11 kW (14.96 HP), grinding belt length: 1,900 mm, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, input voltage: 400 V, - The calibrating and fine sanding machine LIBRA 35 is an extremely versatile machine suitable for a wide range of applications. - Robust, tube-reinforced monoblock steel frame with high-mounted working units for maximum rigidity. - User-friendly due to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start-up for the main motor. - Natural rubber feed belt with negative profile. - Feed table with two rollers at the infeed and outfeed of the feed belt. Ihsdowwkuyspfx Ag Uot - Belt feed driven by geared motor with two speeds. - Flexible steel pressure bar before the first unit. - Rubber pressure rollers before and after each working unit. - Pneumatic belt tensioning per unit with decimal correction option for grit/band thickness.

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Isdjt Hal Dopfx Ag Uoht Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: new, Year of construction: 2025, Spindle swivels: + 45.5° to -45.5° Iodpfxsiqg N Nj Ag Usht Height adjustment: electric Swivel adjustment: electric Stop adjustment: electric Height display: digital Pivot angle display: digital Milling stop display: digital Spindle diameter: Speeds: infinitely variable from 900 - 12000min¯¹ Power consumption: 7.5 kw Motor brake: Yes, automatic Suction connection: 3 x 100 mm, 1 x 120 mm Machine length: 2540 mm Machine width: 1195 mm Weight: 950 kg

Condition: used, Technical data: Spindle diameter: 35 mm Spindle height: 145 mm Max tool size: 220 mm Revolutions: 2900/4400/6000/8000/10000 rpm Isdpoh Dzxzefx Ag Ujht Manual spindle height adjustment Spindle lock Working table dimensions: 300x1100 mm Adjustable culagi arms Engine power: 5.5 kW Power supply: 380 V Producer: Casadei Overall dimensions: Length: 1170 mm Width: 800 mm Height: 1230 mm

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Ijdpfx Asw U Emdog Ujht Model: FS 51 Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Infeed and outfeed tables can be tilted - complete Slotted table lips Low-noise table lips Motorized automatic brake Number of knives: 4 pcs Safety cutter block Table roller: 1 Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Extraction port diameter: 140 mm Space requirement approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in its current condition as inspected, without warranty or guarantee

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Automatic edge banding machine for pre-glued edges Isdpfx Aswfw A Hog Uoht

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00017920, overall weight: 510 kg, spindle diameter: 30 mm, milling spindle length: 180 mm, height adjustment type: mechanical, table length: 2,500 mm, table width: 810 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, input voltage: 400 V, spindle stroke: 90 mm, pivoting range: 45 °, working height: 923 mm, power: 7 kW (9.52 HP), Equipment: motor brake, - Stable steel and grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design Iodpfx Aswwkqhjg Uoht - Smooth operation thanks to precision components and high own weight - Standard with reversible rotation and electronic interlock when changing direction - Five speeds from 3000 to 10000 rpm - Speed adjustment is simple and convenient from the machine side - Standard with MK 4 quick-change spindle system - Large worktable made of cast iron for lasting precision - Easy handling due to control elements and speed display on the machine front - Large dimension milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via handwheel - Numerical display of the set spindle height, precise to one-tenth - High-performance industrial motors

Condition: new, Year of construction: 2024, Type 205. New. Electric raise and lower with digital display. Tiltable spindle 45 degrees. Large filing table with ruler and stopper. Table movement 1200mm. Interchangeable milling spindle. Equipped with top chuck for end mills. Stable milling stop with fine adjustment and counter. Buy for feeders. A quality machine from the well-known Casadei / SCM. Flexible machine that takes up little space. Isdpouh Sxksfx Ag Ujht We arrange shipping al over europe

Condition: new, Year of construction: 2022, planing width: 520 mm Ihjdeiqg Nwepfx Ag Uot planing shaft type: tersa number of blades: 4 sourface table length: 3000 mm table adjustment: electrically read out table height: digital sourface fence adjustable: yes motor power: 7 kW suction connection: 120 mm machine length: 3005 mm machine width: 1460 mm weight: 870 kg

Condition: new, Year of construction: 2022, I sell the new widebelt sanding machine Casadei Libra 45 RCT 110 Year 2022. Configuration: Iodpfx Aorddh Isg Uoht Steel moulding cylinder with spiral knives Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was not working before. Available immediately. Including full documentation and CE.

Condition: used, Year of construction: 1980, used, good conditionmake GEA-Casadeitype DE 410year 1980machineNr. 80-12-72planing width approx. 410 mmtable length infeed approx. 1200 mmtable length outfeed approx. 1000 mmjointing bartable lips slotted/low noisenumber of knives 4 piecessuction connection D 120 mmspace requirement approx. 2300 mm x 800 mm x 1000 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Iodpfx Aevwfxzog Usht

Condition: used, Year of construction: 1999, functionality: fully functional, cutting length (max.): 4,500 mm, saw blade diameter: 30 mm, cutting height (max.): 90 mm, cutting width (max.): 4,500 mm, power: 16 kW (21.75 HP), Cutting length 4500 mm Cutting width 4300 mm Isdswu Ib Sjpfx Ag Ueht Cutting height 90 mm Saw blade diameter max. 350 mm Main saw motor: 7.5 kW Scoring saw blade diameter max. 160 mm Scoring unit motor power 1.5 kW Air cushion tables: 3 pcs 1230 x 400 mm Clamping jaws 7 pcs Saw carriage height adjustment on THK guides Pressure beam with slots (pass through) Side aligner Pneumatic quick-release saw blade system Extraction diameter 4 x 120 Installation dimensions L x W 6700 x 7100 mm Weight approx. 2500 kg

Condition: excellent (used), Year of construction: 1982, Shaft width: 510 mm Max. height: 200 mm 2 knife spiral shaft Pull roller in the table top Ijdjicld Eepfx Ag Ujht Engine power: 5.5 kW

Condition: new, Year of construction: 2025, Planer Casadei / SCM. Type PS63. NEW annual 2025. Planer width 630mm x height 300mm. Equipped with spiral cutter and rubberized challenge roller, which gives a perfect planing result. Electronic setting of planer height and feed speed 5-8-12-18m/min. Planer height setting is done with the push of a button. 9.5hp engine with y/d start. Promotional price: 11.800 euro. We arrange shipping all over Europe. Ihsdpfx Asuh R Rxjg Ujt

Condition: as good as new (ex-display), Year of construction: 2018, Spindle tiltable: Yes -45 to 45° Height adjustment: Handwheel Ihjdsgyzzmjpfx Ag Uot Pivot adjustment: Handwheel Stop adjustment: manual Height display: mech. counter display Swivel angle display: mech. counter display Milling stop display: mechanical counter display spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg

Condition: new, Year of construction: 2022, Working width: 520 mm Planer block: Tersa Number of knives: 4 Ihsdpfx Aoiuldysg Ust Planing table length: 2300 mm Planing stop angle adjustable: yes Planing table folding: pneumatic Maximum thickness throughput of thicknesser: 250 mm Thicknessing table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: articulated Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 g

Condition: as good as new (ex-display), Year of construction: 2021, Working width: 520 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Hollow point adjustment: no Gap removal display: Scala Hollow pointed joint display: - Dressing stop angle adjustable: yes Motor power: 7 kW Machine length: 2800 mm Ihjdpsgr Udvefx Ag Uet Machine width: 1000mm Weight: 870 kg