Used Carving Machine for sale (65,241)

Year of construction: 2004, condition: used, Superfinishing machine Manufacturer: SUPFINA Type: 668WR800 Year of manufacture: 2004 Control system: Siemens Sinumerik Includes Felsomat FZ250 loading system Connected load: 12 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Ledjxwdwlepfx Abyehn Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2002, Crankshaft Grinding Machine Manufacturer: GST Model: S2-900 / 190 DKGM Year of manufacture: 2002–2004 2 machines are available. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Lhodpex Ik Tkofx Abyon Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 700 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSK 40, number of slots in tool magazine: 20, Vertical Machining Center Manufacturer: RÖDERS Model: RFM 600 DS Year of manufacture: 2008 Control system: Röders RFM 600 DS Technical data: - X-travel: 600 mm - Y-travel: 450 mm - Z-travel: 300 mm Lsdsx Iwg Djpfx Abyehn - Spindle speed: 42,000 rpm - Table size: 700 x 550 mm - Tool holder: HSK 40 - Number of tool positions: 20 Equipment: - Extraction system (Keller) - Pallet system (Röders RC 2) Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2010, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 840 D, table load: 400 kg, overall weight: 10,500 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK 63 A, tool length: 330 mm, Universal Machining Center Manufacturer: MAP Type: LPZ 500 Year of manufacture: 2010 Control system: Siemens 840 D Technical data: Travel ranges: - X-axis travel: 500 mm - Y-axis travel: 700 mm - Z-axis travel: 500 mm - A-axis: 240° (-120/+120°) - C-axis: 360° Work table: - Face plate diameter: 440 mm - T-slot width: 14 mm - T-slot spacing: 75 mm - Max. table load: 400 kg Main spindle: - Max. speed: 20,000 rpm - Tool holder: HSK 63 A Tool magazine: - Max. tool length: 330 mm - Tool diameter: 125 mm - Chip-to-chip change time: 4.5 sec - Machine weight: approx. 10.5 t - Space requirements: approx. 2.5 x 5.2 x 3.5 m Accessories: - Kuka robot KR200-3 comp In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Lhsdpexq R E Nsfx Abyen Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2009, travel distance X-axis: 4,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table length: 4,100 mm, table width: 1,700 mm, table load: 12,000 kg, spindle nose: SK 50, Gantry Machining Center Manufacturer: VTEC Model: VB-4020 Ljdpfx Ajz Dby Ijbyshn Year of manufacture: 2009 Control system: Heidenhain iTNC 530 Technical details: X-axis: 4,100 mm Y-axis: 2,000 mm Z-axis: 800 mm Table dimensions: 4,100 x 1,700 mm Max. table load: 12,000 kg Number of tool stations: 32 positions Tool holder: SK 50 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Several wear parts on the machine have recently been replaced. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: defective spare-parts repository (used), Year of construction: 2001, travel distance X-axis: 390 mm, travel distance Z-axis: 435 mm, spindle speed (max.): 4,500 rpm, turning diameter: 220 mm, Vertical Turning Machine - Parts Donor Manufacturer: EMAG Model: VL5 Year of manufacture: 2001 Control system: Fanuc 18i The machine has not been tested and is being sold as a source of spare parts. Technical data: - Turning diameter: 220 mm - X-axis travel: 390 mm - Z-axis travel: 435 mm Lhodpfx Abszz S R Ioyen - Tool holder: VDI 40 - Number of tool stations: 12 positions - Spindle speed: 4,500 rpm Accessories, tools, and workholding devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1998, Cylindrical Grinding Machine Manufacturer: JUNKER Model: Jumat 5002/10 CNC Year of manufacture: 1998 Lodpfsxc Nyvjx Abyshn Control system: Fanuc Equipment & Accessories: - Extraction system - Felsomat loading system An accessory package can be purchased separately. In our assessment, the machine is in very good used condition and can be inspected under power by appointment. Accessories, pictured tools, and workholding devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: defective spare-parts repository (used), Universal Machining Center - Parts Donor Lhodpsyzt A Ujfx Abyjn Manufacturer: MIKRON Model: HSM 400 U The machine is defective and is being sold as a source of spare parts. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2023, condition: used, Measuring Machine Manufacturer: PROZAP Type: EK0 EOL station Year of manufacture: 2023 Control system: Siemens Technical data: - Voltage: 400 V, 50 Hz - Current: 40 A - Operating pressure: 4.5 bar - Total power: 15 kW - Weight: 1,500 kg In our assessment, the machine is in mint condition. Technical features: - Dimensional inspection of the cooling plate using measuring heads - Automatic label application Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Lsdpfx Ajzbvivsbyohn Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2014, workpiece weight (max.): 3,000 kg, travel distance X-axis: 1,200 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, Coordinate Measuring Machine Manufacturer: MITUTOYO Lsdpozbc Hhofx Abyehn Type: Crysta-Apex S123010 Year of manufacture: 2014 Technical data: - X-axis: 1,200 mm - Y-axis: 3,000 mm - Z-axis: 1,000 mm - Resolution: 0.0001 mm - Max. workpiece height: 1,200 mm - Max. workpiece weight: 3,000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, arm length 2150 mm, drilling capacity 80 mm weight 7000 kg Ljdpsyzq Dpjfx Abyehn

Condition: not inspected (used), Year of construction: 1994, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 426 mm, overall weight: 6,500 kg, number of slots in tool magazine: 20, FZ18W magnum rotary indexing table, Fanuc OM control BT40 spindle, maximum spindle speed 8,000 RPM 20-tool changer Lsdjzbal Iopfx Abyshn 2 tables Nikken dividing head

Condition: good (used), Year of construction: 2024, The complete system was acquired in 2024 and used only during a short-term clinical study. Certain individual components may bear manufacture dates from 2023, which is normal for a multi-component system. Manufacturer: Optos Model: California / P200DTx Lhjdpfjz Dq Stex Abyen Configuration: FA – Fluorescein Angiography Condition: Pre-owned, very limited use After the study was completed, the system was professionally disassembled and prepared for transport. It is currently securely packed and palletized in its original transport packaging. The Optos California is a high-end, ultra-widefield retinal imaging system, capable of capturing up to 200° of the retina in a single image, with an exposure time of less than 0.4 seconds. Configuration: Optos California P200DTx imaging system Touchscreen tablet with stand Image server with monitor Dedicated Optos device table Color RG imaging Red-free imaging Choroidal imaging Green autofluorescence Fluorescein angiography (FA) Technical highlights: optomap plus resolution: 14 μm optomap resolution: 20 μm DICOM compatible 100–240 VAC, 50/60 Hz Inspection available by appointment. Worldwide insured shipping can be arranged. Software license, activation, and login credentials are not included; these must be arranged directly with Optos by the purchaser.

Year of construction: 2026, operating hours: 36 h, condition: used, functionality: fully functional, Product weight 2-500g, power220V/1P/50HZ, 0.6KW, Speed50-150pcs/min, machinesize: L1240*W535*H1130mm, SUS304,Weight 95kg The equipment can accurately divide the dough/pastry into evenly sized small dosages, which is suitable for the productionof variouspasta, and the divided dosage will be automatically beaten into the required shape, which has high production speed and high production efficiency. Hopper Material: 304 stainless steel 1. Food standard 2. The hopper is suitable for many kinds of fillings like dry filling, scattered filling and other fillings with poor liquidity. It is more anti-corrosion and stable. Enjoy a long life. Cutter and safety cover Features: Ljdszx D Dbepfx Abyjhn 1. Easy to take apart and control product length. 2. Does not stick dough. 3. All the material which can touch food we also use healthy materials. 4. Can make different shapes by changing nozzles. 5. High-quality nozzle material. Used, in good condition, still under 1-year warranty from the manufacturer. Selling due to the factory closure. More videos & photos on request.

Condition: good (used), Direct from closed food factory - was used for frying Scotch Eggs. Dimensions to follow. Machine looks identical to Heat and Control HeatWave fryer so we think it was maybe manufactured under licence from Heat and Control. It can be supplied as a system comprising of a large double oil tank system for fresh and dirty oil and a Berief Drum Pre Filter. There is no top hold down belt on this machine. Lhsdozmy Aiepfx Abyen

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Lhedpfx Aszrg T Esbyjn Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Ljdpfjw U Uh Dox Abyohn Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: good (used), Aksar AFM-BFM Rasgulla Gulabjamun making machine Lhodpjtu N Alefx Abyon Rasgulla Gulabjamun making machine, ball forming machine is used for cutting and rounding various types of sweets and food products like rasgulla, gulabjamun, rasmalia, chumchum, peda, chocolate, coconut laddu, sweet balls, kachori, dates balls, riceball and various types of bakery, confectionery and indian snacks, 15L hopper, 10,000 pieces per hour, 1g to 100g, variable speed, mobile, 1Ph

Condition: good (used), Direct from catering butchers which closed recently. Commercial model with extended hopper and extended outfeed conveyor. Complete with paper interleaver and auto wipe function (needs compressed air for this function). Lsdpfxjt I E T As Abyjhn

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week.  Ljdpfx Aoulpmzobyshn

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Lhjdpfx Asfig Rwjbyjn Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Axis distance: 920 mm X-axis: 3000 mm Lodpfjcnz H Hox Abyjhn Material thickness: Z 12 mm - 30 mm Feed rate: 20 m/min. A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade moves in the X-direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Lhodpfx Ajhp Rcrsbyjn Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Lodpfxjhp Rc Is Abyjhn Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller model: OKUMA OSP P200M, total height: 3,150 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 630 mm, table length: 630 mm, rotational speed (max.): 6,000 rpm, overall weight: 22,500 kg, spindle speed (min.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Okuma MA series is a horizontal machining center with large travels for heavy-duty machining. The X/Y/Z travels are 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm. Ljdoyg Rb Ropfx Abyjhn - OSP P200M - Year of manufacture: 2008 - Cutting time: 17,500 h - Renishaw Tool Eye - ATC 150 SK50 - 2-pallet system - Spindle speed: 6,000 RPM - B-axis NCB 0.001 degree - X/Y/Z 1000/900/1000 mm - Mayfran Consept coolant system with chip conveyor and high-pressure pump 60 bar