Used Cartons for sale (527)

Condition: used, Year of construction: 2020, Becker BZ-2 - Packaging System - 2 identical, mirror-inverted packaging lines available - without cutting machine - Year of manufacture: 2020 The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine. The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line. The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system. Machine components (see schematic): Hedpfx Afsygipmenjl (1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: Packaging Dimensions (top closure): - min. carton dimensions LxWxH: 500 x 120 x 100 mm - max. carton dimensions LxWxH: 2250 x 420 x 320 mm - max. product weight: 50 kg Packaging Dimensions (side closure): - min. carton dimensions LxWxH: 300 x 150 x 120 mm - max. carton dimensions LxWxH: 1050 x 620 x 470 mm - max. product weight: 50 kg Installation: - Operating voltage: 400 V / 50 Hz - Rated current: 47 A - Pre-fuse: 63 A - Connected load: 32.5 kW - Control voltage: 24 V - Compressed air supply: 6 bar - Air consumption: 10 l/min - Sound pressure level: < 70 dB(A) - Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 11527A, Wrapping machine for individual folding cartons and multi-packs in PVC, PE film, etc. Film width from 90 mm to 300 mm, film thickness from 0.020 mm to 0.050 mm, film roll diameter up to a maximum of 350 mm, format range min. 60 x 60 x 20 mm, machine output up to 60 cycles per minute. *Further data and images available on request Hjdpoyhmh Nefx Afnjl *Number of machines available: 2 units

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Offer consists of: • Year of manufacture: 2020 • Impressions: approx. 64 million • SW4 perfecting • FAPC fully automatic plate change • ALV2 extended delivery • 18,000 sheets/h • 'CX' carton package Hodpfx Ajyyyb Usfnol • ErgoTronic ColorControl • Extended camera system • Tecnotrans Beta.f • New rollers: replaced in 2025 Comprehensive technical documentation available on request. Video available.

Condition: excellent (used), functionality: fully functional, The Horizon RD-4055 is a high-precision rotary die-cutting system designed to offer a compact, versatile, and highly productive solution for post-press processes. This machine stands out for its ease of use, quick job changeovers, and its ability to handle a wide range of applications, making it ideal for both short and medium production runs. Thanks to its rotary die-cutting technology, the RD-4055 enables multiple processes to be completed in a single pass, including die-cutting, creasing, perforating, cutting, kiss-cutting, and punching, thereby optimizing production times and significantly reducing operational costs. ⚙️ Main Features - Maximum working format: 400 x 550 mm - Material thickness: up to 0.5 mm (depending on application) - Production speed: up to 6,000 cycles/hour - Feeding system: suction belt with double-sheet detection - Precise registration: controlled by servomotors for maximum accuracy The system incorporates a top magnetic cylinder and a bottom support (anvil) cylinder to ensure clean and consistent cuts, even with demanding jobs. 🚀 Competitive Advantages 🔹 Single-pass production Integrates feeding, die-cutting, and separation, minimizing handling and labor requirements. 🔹 Reduced die costs The “Repeat Register” function allows multiple jobs to be repeated with a single die, optimizing tooling investment. Hedpfxsy E Hauj Afnjl 🔹 High flexibility Capable of processing coated papers, folding cartons, and other printed substrates from both digital and offset presses. 🔹 Quick changeover and ease of use Intuitive set-up via touch panel, with rapid format and product adjustments. 🔹 Space-saving design More compact than traditional die-cutters, ideal for production environments with limited space. 🧩 Applications The RD-4055 is particularly well-suited for the production of: - Lightweight packaging (boxes, cases, folders) - Labels and adhesives (kiss-cut) - Cards and promotional materials - Printed products requiring creasing or perforation 🔧 Options and Configurations The system can be integrated with various modules to fit production requirements: - Automatic waste separator - Stacker for complex jobs or delicate materials - Dual magnetic system (RD-4055DM), which enhances creasing quality through male/female dies 🎯 Conclusion The Horizon RD-4055 is an efficient, precise, and cost-effective rotary die-cutting solution, especially suited for companies seeking to automate processes, reduce die costs, and boost productivity without compromising on final product quality.

Condition: ready for operation (used), functionality: fully functional, A good used automatic labelling system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required Hedpfx Aowufb Aefnjl Single phase 240Volt AC supply Ready to ship worldwide

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, GIGANT / Mosca SoniXs-TR-6 Base – Fully Automatic Strapping Machine Professional Mosca SoniXs-TR-6 Base – the proven flagship from the German market leader in fully automatic strapping technology. Up to 35 packages/min with a 600 × 600 mm frame size. TECHNICAL DATA • Model: SoniXs-TR-6 Base • Manufacturer: Mosca GmbH (Germany) • Year of manufacture: 2016 • Performance: up to 35 packages/min • Frame size: 600 × 600 mm • Conveyor speed: 0.1 – 1.0 m/s (infinitely variable) • Strapping: PP straps, width 5–12 mm • Control: MSCB-1 with digital control panel • Working height: approx. 850 mm EQUIPMENT & FEATURES • SoniXs ultrasonic technology – low emissions & energy-efficient • Standard-6 strap path system – tool-free maintenance • Pneumatic actuators for optimum strapping process • CE marked ex-works – ready for immediate use • Modular concept – can be expanded to tandem machine • Cost-efficient base version with proven mechanics Hedpfx Afey Eqquensl • Optimized chassis – flexible positioning • Two separate control cabinets for extended applications • Pneumatic hold-down device available • Stop options for various applications • Volt-free contacts for line integration • Four swivel castors with locking brake SoniXs Ultrasonic Technology: The patented Mosca sealing system operates without warm-up time, requires minimal maintenance, and produces reliable, strong seals – unique in the industry. APPLICATION AREAS Perfect for: logistics, shipping departments, e-commerce, wholesalers, printing houses, pharmaceutical and food industries. Ideal for cartons, packages, and other packaging units requiring reliable strapping for transport. Application areas: high-throughput environments where process reliability and uptime are crucial. ABOUT MOSCA Mosca from Waldbrunn is Germany’s market leader in strapping technology and has been synonymous with the highest quality and reliability for decades. The SoniXs series is the flagship of fully automatic strapping machines. CONDITION & AVAILABILITY Fully functional, regularly serviced, and well maintained. Normal wear consistent with age, technically in excellent condition. Ready for immediate use – no hidden defects. LOCATION & TRANSPORT Location: Central warehouse Auction House Köck, 6178 Unterperfuss, Austria. Collection by buyer or shipping by freight carrier upon agreement. Transport costs on request (depending on destination). Viewing and test run possible by appointment. All information without guarantee. Subject to errors and typographical mistakes.

Condition: excellent (used), functionality: fully functional, GIGANT / Mosca SoniXs-MP-6 T – Automatic Table Strapping Machine (Premium Class) The automatic table strapping machine for demanding applications with a space-saving design. Up to 58 strapping cycles/min at 800 × 800 mm frame size. Ideal for integration into production lines. TECHNICAL DATA • Model: SoniXs-MP-6 T (table model) • Manufacturer: Mosca GmbH (Germany) • Year of manufacture: 2016 • Performance: up to 58 strapping cycles/min (with 5 mm strap) • Frame size: 800 × 800 mm • Strapping material: PP straps, width 5–12 mm • Sealing system: SoniXs ultrasonic Standard-6 • Operation: Continuously rotary control panel • Mobility: 4 castors (2 lockable) Hsdpfx Asy Epq Hofnjl FEATURES & EQUIPMENT • SoniXs ultrasonic sealing system – low-maintenance & energy-efficient • Modular machine construction – flexibly extendable • Tool-free disassembly – easy maintenance • Automatic strap threading system • Front and side coil change • Programmable strap tension • Stand-by function • Automatic strap end detection with strap residue ejection • DC drive technology with direct drives • Integrated strapping cycle counter • Quick-change coil system • CE marking included • Optional: narrow sealing head for particularly slim products APPLICATIONS Perfect for small to medium packaging volumes, workstations with limited space, and integration into existing production lines. Industries: printing, office supplies, electronics manufacturing, logistics, craft trades. Products: cartons, parcels, magazine bundles, catalogues. CONDITION & AVAILABILITY Fully operational, inspected and ready for use. Machine in very good condition with normal signs of use. Viewing and test run available by appointment. LOCATION & TRANSPORT Location: Central warehouse Auction House Köck, 6178 Unterperfuss, Austria. Self-collection or freight shipping by arrangement. Transport costs on request (depending on delivery address). Sale without roller tables. All information without guarantee. Subject to errors and misprints.

Condition: used, Year of construction: 2007, operating hours: 3,339 h, machine/vehicle number: LC615, Used ELOPAK sks-s60S shikoku filling lineTechnical Specifications & Performance DataThis aseptic gable-top carton filling machine is engineered for high-integrity beverage packaging, delivering reliable performance for long-life products. Manufactured by Shikoku Kakoki in 2007, it operates with low accumulated hours and supports multiple carton formats for flexible production planning in industrial packaging and beverage production environments.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear of manufacture: 2007Operating hours: 3339Filling mode: AsepticContainer type: Gable-top cartonsCompatible formats: 0.5L, 0.75L, 1.0LElectrical supply: 400 V, 50 Hz, 3-phaseCurrent draw: 114 ACompressed air pressure: 550–990 kPaAir consumption: 2460 NL/minAdvanced Automation & Control SystemsDesigned for aseptic operation, this machine supports precision filling in a controlled sterile environment. Its three-phase industrial electrical configuration ensures stable operation and straightforward integration with plant utilities. Format changeovers across 0.5L, 0.75L, and 1.0L cartons are engineered to be efficient, helping reduce downtime and improve overall equipment effectiveness in second hand or refurbished installations.Industrial-grade controls for consistent aseptic performanceProcess parameters optimized for sterile packaging operationsOperator-friendly interface for setup and monitoringInterlocked access points and safety circuits for protected operationProduction Line Integration CapabilitiesThis aseptic carton filler integrates seamlessly within a used bottling line or new packaging configuration. It is well-suited for pairing with upstream carton preparation or sterilization modules and downstream cap closing, date coding, case packing, and palletizing equipment. The machine supports inline or standalone operation depending on plant layout.Interfaces with conveyors and downstream packaging machineryFlexible line positioning for greenfield or retrofit projectsMulti-format capability for 0.5L, 0.75L, 1.0L cartonsMachine Condition & Maintenance HistoryWith only 3339 operating hours, this second hand aseptic filler presents low wear relative to typical lifecycle expectations for industrial packaging equipment. Its configuration and utilities align with common European plant standards, supporting rapid recommissioning by qualified technicians.Low operating hours indicating limited duty cycleWell-preserved aseptic configurationOperational Performance & VersatilityOptimized for aseptic beverage production, the machine is ideal for long-shelf-life products commonly packaged in gable-top cartons. Its multi-format capability enables agile product scheduling and SKU changes without extensive retooling.Aseptic filling for extended shelf lifeSupports standard gable... Hodpeyz R E Tofx Afnsl

Condition: used, machine/vehicle number: LC555, Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filling using an integrated sterilization system, microbial barrier, and precise dosing mechanisms. Consequently, it processes pasteurized or sterilized products intended for extended shelf life and keeps them intact without requiring refrigeration. Furthermore, the filler maintains a sterile environment throughout the entire cycle. In addition, it ensures consistent product dosing and eliminates variability in filling performance. As a result, manufacturers can rely on this equipment to meet strict food safety requirements. Aseptic capper Tetra Pak TCA88 The line also includes the Tetra Pak TCA88 capper, built in 2006. This module applies plastic caps to filled containers using induction or mechanical systems that ensure hermetic sealing in an aseptic environment. Moreover, the capper synchronizes precisely with the filler to ensure uninterrupted operation. In contrast to conventional systems, this integration significantly reduces the risk of contamination after filling. In the same way, the TCA88 includes built-in quality control functions that verify each cap’s position and torque. Meanwhile, Tetra Pak designed the unit with safety features such as interlocked guards and error monitoring systems, ensuring full compliance with industry standards. Hodpfswkux Njx Afnjl Cardboard packer TCBP70 in this used aseptic filling line Tetra Pak The Tetra Pak TCBP70 packer, manufactured in 2007, manages secondary packaging. This automatic system forms and fills corrugated cartons using wrap-around or preformed box configurations. Similarly, it operates with fully electronic controls that allow real-time adjustment and monitoring. Therefore, the machine supports flexible packaging layouts and rapid format changes. In addition, the TCBP70 includes safety systems such as light curtains and emergency stop devices. For example, if an operator enters the guarded zone, the system halts automatically to prevent accidents. As a result, the packaging process remains both efficient and secure. Industrial applications and operational benefits The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h targets producers in the dairy and beverage industries who require aseptic packaging capabilities. For instance, companies manufacturing milk, plant-based drinks, or fruit juices can benefit from the line’s ability to maintain sterility without cold chain logistics. In fact, the full integration of Tetra Pak modules allows manufacturers to achieve high energy efficiency, complete batch traceability, and reduced d...

Year of construction: 2019, condition: like new (used), functionality: fully functional, Box On Demand, Endless Corrugated Board, pay attention to your CO2 footprint, The machine listed here for processing endless corrugated board belongs to the series of static machines, i.e., operations across the machine are carried out while the carton is stationary. The machine is designed for high productivity. The maximum working width of the carton is 1,500 mm. All tool settings are made automatically. 1) Main Machine Body (Carton Cutting Automaton): Linear cross-cutting and cross-creasing unit for head-to-foot processing on the carton. 8 longitudinal creasing/cutting units from above for longitudinal creases and cuts in the carton 2) Double Carton Magazines Hedpfsyy Iqkox Afnol 2 carton magazines provide for the supply and feeding of raw carton material to the processing machine. Stack height for endless corrugated board up to max. 2,000 mm possible 3) Control Cabinet, Control System, Electronics: Contains all components required for operation and control of the system. Control cabinet components are based on HOMAG standard.

Condition: used, Year of construction: 2007, operating hours: 74,000,000 h, MAN ROLAND 205 E0B • 5-color • Max. format: 520 mm x 740 mm • ProfitPlus Premium package including: - Double sheet feeder - Baldwin cleaning unit - Complete carton guide - EPL (Ergonomic Plate Loading) • Kersten antistatic system • Bacher register system • Powder sprayer: Grafix 72 Digital Plus • Alcosmart • PressManager Smart Interface • Smart R 200 Online • Remote control: RCI for ink and register • ColorPilot Smart • Automatic wash-up device for: - Ink rollers, impression cylinders, blanket cylinders • Electronic sheet feeding control • Nonstop delivery • Delivery-side control panel • JobCard Reader • Carton device • In production • Location: Germany • Availability: immediately Hsdpfx Asytb Egsfnol

Condition: used, Year of construction: 2005, machine/vehicle number: M268, Used Filling Monoblock GALDI RG50 up to 3000 brick/h Technical Specifications of the Used Monoblock GALDI Hodpfxovgvgus Afnol The Used Filling Monoblock GALDI RG50 up to 3000 bph offers high performance and reliability for producing fresh liquid products like milk, cream, and fruit juices. Consequently, it handles up to 3000 cartons per hour, making it ideal for medium-sized production plants that require fast and consistent output. Therefore, this machine stands out in terms of both speed and efficiency.Production Capacity and Carton SpecificationsGaldi developed the RG50 model to process up to 3000 cartons per hour. Moreover, the machine supports 0.25, 0.50, and 1-liter capacities, with cartons measuring 70 x 70 mm in B-style. Thus, these specifications ensure that Monoblock efficiently packages various formats while maintaining high operational efficiency. As a result, it offers versatility for different packaging needs.Power Supply and Energy ConsumptionThis Monoblock consumes 20 kW of power and operates at a voltage of 380V with a frequency of 50Hz. Furthermore, these energy requirements are standard for industrial machines of this class. Consequently, production facilities must ensure their electrical infrastructure can meet these demands to avoid any compatibility issues or operational disruptions. In addition, careful planning will help avoid unnecessary delays in production.Year of Manufacture and Operating ConditionsGaldi manufactured the Used Filling Monoblock GALDI RG50 up to 3000 bph in 2005. Although the machine has logged 22,506 hours of production, after receiving full servicing in 2019, it remains fully operational. Therefore, the machine is currently in storage and is available for sale in “as is” condition. Additionally, its recent maintenance ensures smooth operation, increasing its value.Dimensions and WeightThe machine measures 4.70 meters in length, 2.45 meters in width, and 2.85 meters in height, with a total weight of 2500 kg. Consequently, these compact dimensions allow for easy integration into existing production layouts. Hence, production teams must ensure there is sufficient space for installation and future maintenance access. Ultimately, proper planning of the workspace guarantees seamless installation.Compatible ProductsThe Used Filling Monoblock GALDI RG50 up to 3000 bph processes fresh liquid products like milk, cream, and juices. Its technology, therefore, maintains the quality of sensitive products, preserving their organoleptic properties throughout the bottling process. Therefore, operators must ensure the products meet the machine’s specifications to avoid any issues in quality or disruptions in production. Moreover, adhering to these requirements helps maintain a smooth operation.Conclusion of the Used Monoblock GALDIIn summary, the Used Filling Monoblock GALDI RG50 up to 3000 bph offers a reliable and versatile solution for plants bottling fresh liquid products. Its ability to handle multiple carton formats and its well-maintained condition make it a cost-effective choice for those looking for an efficient used machine. Additionally, with proper installation and configuration, the machine will optimize production and maximize bottling efficiency.

Condition: used, Dear Sir or Madam, We offer for sale: Assembly line for inserting a gasket into a jerrycan cap Hodpfx Aoyym N Sjfnsl incl. 2 feeder belts (for jerrycan caps and gaskets) Assembly unit as well as carton feeding and finished product discharge conveyors

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min Hjdpfeywxraox Afnjl 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. Hjdpfx Aoy Ickbefnel The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 2,800 mm, Box On Demand, endless corrugated cardboard, pay attention to your CO2 footprint. The machine listed here for processing endless corrugated cardboard belongs to the series of static machines, meaning cross-machine operations are performed while the cardboard remains stationary. The machine is designed for high productivity. The maximum working width for cartons is 2,800 mm. All tool settings are adjusted automatically. 1) Main machine body (automatic carton cutting unit): - Linear cross-cutting unit for head-foot cuts and cross-cuts on the cardboard. - Linear cross-creasing unit for cross-creasing the carton. (Available as a cross-creaser, or as a cross-creaser with perforation feature.) - 8 longitudinal creasing units from above for longitudinal creases on the cardboard. - 8 longitudinal cutting units for executing the longitudinal cuts. 2) Carton changer, 4-way cassette feed Hjdsyxw Agepfx Afnsl The motor-driven carton changer, operated with a lifting axis, uses 4 separate cassettes to feed cardboard into the main machine body’s infeed. Each cassette can accommodate raw material web widths up to 2,800 mm and feeds them automatically to the main machine body upon request from the machine control system. The third cassette can accommodate two working widths. 3) 5-way carton magazine Five carton magazines supply and feed the raw cardboard to the processing machine. Stack heights of endless corrugated cardboard up to 1,500 mm are possible. 4) Control Cabinet, Controls, Electronics: Includes all components required to operate and control the system. Control cabinet components are based on Siemens technology.

Condition: used, The GALDI RG 260 Gable Top Filling Machine is designed for filling and sealing gable top cartons, typically used for packaging beverages, dairy products, and other liquid goods. Here are some key features and descriptions of this machine: - High Efficiency: The RG 260 is known for its high filling speed, accommodating large production runs efficiently. - Versatility: This machine is compatible with various gable top carton sizes and can handle different types of liquids including juices, milk, and soups. - Precision Filling: Equipped with advanced filling technology, the RG 260 ensures accurate and consistent filling, reducing product waste. - Automatic Operation: The machine generally operates automatically, allowing for minimal manual intervention, which enhances productivity. - Sanitary Design: Designed to meet hygiene standards, the RG 260 is constructed with materials that are easy to clean, ensuring food safety. - User-Friendly Interface: The machine usually comes with an easy-to-navigate control panel for monitoring and adjusting settings. - Robust Construction: Built to last, the RG 260 features durable materials that withstand high production demands. Filling Volume: 250ml-330ml -500 ml - 1000ml Capacity: 6,000 b/hr Hedpfsy Dccpjx Afnjl Carton Size: 70 x 70 Cap Applicator: Included Electricity Requirements: 400 V - 50HZ - 3 +N Amps Requirements: 80 AMPS INPUT Available: Immediately Relocation: Loading with in 5 Days from order

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Hodpfx Aoy Aam Nsfnsl Max. pressure: up to 160 bar Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition tank interior shown in photos sold exactly as pictured

Condition: excellent (used), Year of construction: 2015, Item: Galdi RG270UCS Used Filling machine: Galdi RG270UCS, for the inline forming, filling and sealing of Gable Top cartons. Pure-Pak Classic with Crew Cup Hedpfx Afeiiyr Ionel Production year 2015 Pure-Pak Classic Ultrasonic Screw Cap Applicator moved by servomotors, many spare parts incl. The machine has been in production to 2021 and was dismantled q2 2021. Carton size 70 x 95 mm, 1500ml Speed up to 7000 cartons per hours Filler Volumetric piston filler + Bottom up Lenght 7715 mm Width 1500 mm Height 3655 mm More technical details can be provided upon request. We offer two pieces identical machines.

Year of construction: 2015, condition: ready for operation (used), injection weight: 2,424 g, This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment • Mold Dehumidifier: Incl. hood, spare parts package, piping • Conveyor Belt: Two-sided preform filling system for cartons/grid boxes Machine Benefits Technical Machine Benefits • The package includes two machines along with additional components such as pellet silos, pellet feeder, discharge system for foreign bodies in pellets, dosing unit for color, and platform. Everything seen in the pictures is included. • Max throughput: 390 kg/h pet Hsdpfx Afox D Hvwenel • Clamping unit: fully electric with toggle drive • Clamping platen: movable, guided on rollers • Type: split version • Dryer: dr815ht-g3 with 4000-liter drying hopper (stainless steel, insulated) • Husky 1: 3 tools - 28 gauge muzzle, 17. 8/26/30. 3 grams • Husky 2: 2 tools - 38 gauge muzzle, 18/29 grams Extra Information Clamping Force Clamping Unit: Fully electric with toggle drive Clamping Platen: Movable, guided on rollers Control Unit Control System: Integrated control system for additional equipment Display for Mold Cooling Water Temperature/Pressure (Flow and Return) Control Output for Color Dosing Unit Lubrication System: Automatic Post-mixing Device: Integrated in the nozzle Tools 48-cavity H-PET Injection Mold Preform Weight: 17.8 g and 30.26 g Punch Size: 50 x 140 mm Includes: 3-position removal plate, basic spare parts package 32-cavity H-PET Injection Mold Preform Weight: 18 g and 29 g (38 mm Bericap) Punch Size: 63.5 x 140 mm Includes: 3-position removal plate, basic spare parts package Functions Temperature Monitoring and Setting Continuous Level Meter Variable Dew Point Setting Conveying: Hot transport of the granulate via vacuum unit P07 to the booster hopper (HAD400) Paint Mixing Units For Solid Paint: Volumetric, 4 dosing screws For Liquid Paint: 4 dosing pumps Preform Production Specifications Preform Weight: 17.80 g Mouth: PCO1881 LW Length: 89.35 mm Wall Thickness: 3.06 mm Base: 2.30 mm Shape: Bell Cavities: 48 Cycle Time: 12.4 ±0.3 s Preforms per Hour: 13935 Annual Production (95% availability): 111205000 Throughput (kg/h): 248 Power Consumption: 506 Wh/kg PET Preform Weight: 29.00 g Mouth: Bericap 38 Length: 108.59 mm Wall Thickness: 3.16 mm Base: 2.42 mm Shape: Bell Cavities: 32 Cycle Time: 13.7 ±0.3 s Preforms per Hour: 8409 Annual Production (95% availability): 67101000 Throughput (kg/h): 244 Power Consumption: 532 Wh/kg PET Preform Weight: 18.00 g Mouth: Bericap 38 Length: 82.04 mm Wall Thickness: 2.70 mm Base: 2.20 mm Shape: Bell Cavities: 32 Cycle Time: 11.3 ±0.3 s Preforms per Hour: 10195 Annual Production (95% availability): 81353000 Throughput (kg/h): 184 Power Consumption: 506 Wh/kg PET Preform Weight: 30.26 g Mouth: PCO1881 LW Length: 122.30 mm Wall Thickness: 3.00 mm Base: 2.30 mm Shape: Grade Cavities: 48 Cycle Time: 14.7 ±0.3 s Preforms per Hour: 11755 Annual Production (95% availability): 93805000 Throughput (kg/h): 356 Husky1 PCO 1881 30,3g 1-1,5l PCO 1881 26,0g 1-1,5l PCO 1881 17,8g 1-1,5l Husky2

Condition: excellent (used), Year of construction: 2020, total length: 3,600 mm, total height: 8,000 mm, MECALUX Pallet Racks 8000x1100 mm | 3600 mm | 1800 kg | + Decking | LARGE SET We offer MECALUX pallet racking in very good condition – ideal for warehouses, production sites, and storage areas utilising decking boards. 🔧 Specification: Manufacturer: MECALUX Frame height: 8000 mm Depth: 1100 mm Upright: 85 mm Beam length: 3600 mm Beam profile: 110x50 mm Load capacity: 1800 kg per level Condition: very good 📦 Availability: approx. 300 frames approx. 2,000 beams ➕ Included in the set: decking boards for 3600 mm support beams for boards (platform/support beams) 👉 Ideal for: bulk storage (cartons, components) picking zones mixed warehouses (pallet + small goods) 🔧 Flexible configuration: Option to adjust: - number of levels - rack layout - areas for pallets or boards We design layouts tailored to your warehouse operation – not just ‘rack sales’. 🛡️ Why choose us: - proven MECALUX system - very good technical condition - fast availability - real savings compared to new racks - possibility to create picking zones without additional structures 🚚 Logistics: dismantling, packing, and transport available personal pickup or delivery ➕ Also available: STOW, DEXION, AR Racking, Jungheinrich racking Hodpfey Enhyjx Afnjl wire mesh shelves (300 / 500 / 1000 kg) pallet backstops/retainers upright guards, bumpers complete warehouse equipment 📞 Contact us – we will design a customised layout for your warehouse and calculate the exact number of pallet and picking locations.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 230 V, input current: 2 A, input frequency: 50 Hz, power: 0.48 kW (0.65 HP), For sale is a Mosca strapping machine P-5, year of manufacture 2007, suitable for bundling newspapers, magazines, or shipping cartons. The machine has seen very little use and was stored for 6 years in between. Strapping is triggered manually via foot pedal. Uses 5 mm strapping tape. Throughput: 50 to 55 strappings per minute, automatic strap threading and strap end ejection, electronic tension adjustment via potentiometer. Equipped with a soft-tension button. The machine has been fully overhauled and is in very good condition. Frame size: 600 x 500 mm. Video available upon request. Inspection and test run possible by appointment. Free delivery within 200 km of Vienna. We can secure and package the machine on a pallet for transport by freight forwarder or for self-collection. Type: RO-M-P5 Serial number: 87878 Power configuration: 1L~N~PE Voltage: 230 V Current type: AC Power: 0.48 kW Frequency: 50 Hz Current: 2.6 A Hsdpoy Ew N Tofx Afnol Year of manufacture: 2007 Control voltage: V Control current type: DC If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 1997, Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrapping, pallet labelling Scope of Delivery  Carton erector | CERMEX | F37 | 1999 | Formeuse de carton Bag‑in‑Box filler | OETTEL | A 4001 | 1999 | BIB filling machine Checkweigher | PRECIA MOLEN | X241‑DCKW | 1999 | Weight control Carton closer | CERMEX | C642.41 | 1999 | Carton closing Carton conveyors | ANDUZE |- | 1998 | Conveyor system Labeller | VIDEOJET | APL 210 LH | - | Carton labelling Palletizing robot | BEMA | - | 2017 | Fanuc robotic palletizing system Stretch wrapper | BEMA | Silkworm LS | 2017 | Stretch wrapping unit Pallet labeller | LOGOPAK | - | 2023 | Pallet labelling machine   Hedpfx Afjymr U Ejnjl

Year of construction: 2020, operating hours: 1,000 h, condition: used, functionality: fully functional, KAMA ProCut 76 Foil – Die-Cutting and Hot Foil Stamping Machine Model Year 2020 | High-End Configuration | Industrial Quality “Made in Germany” For sale is a KAMA ProCut 76 Foil from the 2020 model year. This machine is engineered for demanding die-cutting, embossing, and hot foil applications, making it ideal for carton, packaging, and finishing companies with high quality requirements. Features & Highlights • High-performance die-cutting machine for paper, board, and plastics • Integrated hot foil stamping system for premium finishing • Very high production output with excellent precision • Robust, durable machine design • Servo-controlled feeder and transport table with electronic double-sheet control • High degree of automation and reproducible quality • CE-compliant, Made in Germany Hsdjyc Hmuspfx Afnol Standard Equipment • Motorized platen pressure adjustment (MPC) • 4+1 system with base plate and 1 set of 1-mm counter plates  – 5× medium, 1× hard • 1 standard chase with fine adjustment for steel rule tools (full format) • 3 pile trolleys for feeder and delivery (plus 4 additional pile trolleys) • Servo-driven feeder and transport table • Electronic double-sheet control • 1 set of KAMA fastening elements • 1 set of mounting elements for 15° dies on KAMA carrier plate • Industry 4.0-ready for remote maintenance and network integration Special Equipment & Options • Integrated hot foil stamping  – Mobile frame with integrated heating system  – 4 or 6 heating zones  – Two foil draw motors  – Powered rewind shaft  – Two tool carrier plates  – Foil-Saver software for foil optimization • KAMA AutoRegister  – Maximum registration accuracy  – Especially suited for digitally printed sheets • Pneumatic tool clamping (76 only) • Die-cutting force display with overload protection • Universal chase • Chase rack • Vacuum pump and compressor • Servo main drive for asynchronous drive cycle  – Up to 50% higher machine speed  – Alternatively, extended contact time for hot foil stamping Technical Data (excerpt) • Machine type: KAMA ProCut 76 Foil • Model year: 2020 • Maximum sheet size: 760 × 600 mm • Minimum sheet size: 279 × 210 mm • Maximum die-cut size: 743 × 585 mm • Material range:  – Paper from 100 gsm  – Board up to 1,500 gsm (approx. 1.8 mm)  – Plastics such as PET, PP, PVC • Production speed: up to 5,500 sheets/h • Die-cutting force: 165 tons (1.65 MN) • Gripper margin: 10 mm • Machine dimensions (L × W): 4.87 × 2.69 m Applications • Die-cutting of folding cartons and packaging • Hot foil stamping for premium enhancements • Carton, paper, and plastic applications • Post-press finishing of digitally printed sheets with highest register requirements • Short and medium runs with maximum precision Conclusion The KAMA ProCut 76 Foil is a highly flexible, high-performance die-cutting and hot foil stamping machine for professional users. With comprehensive standard and special equipment, state-of-the-art servo technology, and Industry 4.0 readiness, it offers an outstanding overall package for demanding production environments.

Condition: used, Year of construction: 1989, functionality: fully functional, Paper Guillotine PERFECTA 168 – Year 1990, equipped with new electrical system (standard-compliant retrofit) and EG Control Graphic programmer. Complete with enlarged side tables and air-assist triangles, 2 spare blades, accessories, and manuals. Very robust machine, suitable for carton production and aluminum cutting, in good condition and fully operational. Hjdpoy Aur Tsfx Afnjl