Used Car Baler for sale (8,840)

Condition: used, maximum load weight: 2,580 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 6,550 mm, loading space width: 2,050 mm, loading space height: 580 mm, Year of construction: 2024, Welcome to Nutzfahrzeuge West GmbH! NEW!!! Chat with our sales advisor via WhatsApp: .----Ideal for large maxi transporters such as Sprinter/Crafter ... or 2 small vehicles TECHNICAL DATA: * Trailer type Merkur XL * Storage box * Gross weight 3500 kg * Payload 2582 kg * Internal dimensions L: 655cm, W: 205cm * External dimensions L: 920cm, W: 210cm, H: 65cm * Loading height approx. 58cm * Floor: aluminum perforated plate * Lashing points in perforated plate * Frame: welded steel, hot-dip galvanized Kedpfexvwy Rox Ag Ujll * Electrics: 13-pin, 12V * Tires: 195/55R10 * Axle manufacturer: AL-KO * Number of axles: 3 * Braked axles * Support wheel standard * Anti-sway coupling AL-KO AKS 3504 * Hand winch standard AL-KO * Suspension with shock absorbers incl. 100 km/h approval * Wheel chocks

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Kledpfx Asx Irw Reg Ujl Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: new, axle configuration: > 3 axles, first registration: 09/2025, loading space length: 8,900 mm, loading space width: 2,540 mm, total length: 10,940 mm, total width: 2,540 mm, total height: 3,750 mm, suspension: air, tire size: 245/70-R17.5, Year of construction: 2025, = Additional Options and Accessories = - Forklift pockets = Remarks = NEW and UNUSED MAXTRAILER MAX600-S-4-8.90-U 4-axle trailer with hydraulically operated and sliding ramps, 890cm loading platform with rear bevel, ABS/EBS, TPMS, BPW axles with drum brakes, air suspension with lift and lower valve, axle unit with drawbar approx. 1750mm and 50mm towing eye, coupling height 830-1010mm loaded, width indicator boards, warning beacon, 6 pairs of pipes for stanchions (approx. 100x50mm), tyres 245/70-R17.5 = Further Information = Axle Configuration Tyre size: 245/70-R17.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Kljdoyazbhepfx Ag Usl Front axle 1: Dual tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Front axle 2: Dual tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 1: Dual tyres; Max. axle load: 10,700 kg; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 2: Dual tyres; Max. axle load: 10,700 kg; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Weights Unladen weight: 8,464 kg Payload: 34,336 kg GVW: 42,800 kg Functional Body brand: MAXTRAILER MAX600-S-4-8.90-U Loading platform height: 90 cm Condition Overall condition: very good Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for more information.

Condition: good (used), mileage: 177,601 km, power: 162 kW (220.26 HP), first registration: 01/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 200 l, emission class: euro5, total length: 8,900 mm, total width: 2,550 mm, total height: 900 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 900 mm, Year of construction: 2013, Technical information Number of cylinders: 4 Engine displacement: 4,580 cc Maximum front axle load: 4,400 kg Maximum rear axle load: 8,400 kg Weights Unladen weight: 5,490 kg Payload: 6,500 kg Gross vehicle weight: 11,990 kg Functional Loading platform height: 90 cm Condition Klodpfoyb A Tbex Ag Uol Technical condition: good Visual condition: average Further information For more information, please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos. = Company information =

Condition: new, axle configuration: 1 axle, New from Agomac the mobile ditch bridge. - This bridge is designed to easily bridge a ditch or waterway. - The bridge can be assembled entirely to your wishes. Status: New Kljdpoyavnvjfx Ag Uol

Condition: used, mileage: 332,384 km, power: 155 kW (210.74 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,820 mm, fuel: diesel, brakes: engine braking, gearing type: automatic, emission class: euro6, total length: 8,990 mm, total width: 2,400 mm, Year of construction: 2019, Equipment: ABS, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, traction control, Cab: double Max. front axle load: 4400 kg Max. rear axle load: 8100 kg Number of cylinders: 4 Engine capacity: 5.132 cc Empty weight: 6.965 kg Carrying capacity: 5.025 kg Klodpfx Agjybbukj Usl GVW: 11.990 kg Registration number: 87-BNL-5 6 Seat 2x Winch Brille Plateau length 575 cm

Condition: used, axle configuration: 1 axle, total length: 5,000 mm, total width: 2,000 mm, Carrying capacity: 4.000 kg VAT/margin: VAT qualifying Kledpfx Ageyapr Is Uel

Condition: excellent (used), mileage: 36,822 km, power: 368 kW (500.34 HP), first registration: 12/2024, fuel type: diesel, tire size: 315/60 22,5, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2024, Equipment: AdBlue, air conditioning, cruise control, differential lock, navigation system, parking air conditioner, parking heater, second fuel tank, spoiler, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Aluminum fuel tank - Roof spoiler - High beam headlights - Low noise - Alloy wheels - Air suspension - Metallic paint - Reversing camera - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - Toolbox - Power Take-Off (PTO) - Towing hitch = Notes = Volvo FH500 XL4x2 MY: 4-12-2024 KM: 36,822 YV2RT40A9RB462417 I ParkCool I-Shift Full air Blyss Car Transport Trailer Blyss 2024 WB2D18002R1G00089 SAF axle Winch = Further Information = Technical Information Number of cylinders: 6 Transmission Transmission: I-Shift, 12-speed, automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 315/60 R22.5; Alloy wheels; Max. axle load: 8,000 kg; Steering; Tire tread left: 80%; Tire tread right: 80% Rear axle: Tire size: 295/60 R22.5; Twin tires; Differential lock; Alloy wheels; Max. axle load: 11,500 kg; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80% Weights Unladen weight: 10,700 kg Payload: 9,100 kg Gross vehicle weight: 19,800 kg Ksdpfxoybaucs Ag Ujll Functional Body manufacturer: Blyss Max. number of cars: 6 Condition Technical condition: Very good Visual condition: Very good

Condition: used, mileage: 584,000 km, power: 265 kW (360.30 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,150 mm, total width: 2,550 mm, loading space length: 8,150 mm, loading space width: 2,550 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, traction control, Year of manufacture: 2019 Suspension: air suspension Front axle: Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Double wheels; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Empty weight: 9.735 kg Carrying capacity: 9.265 kg GVW: 19.000 kg New Galvanized Loading Platform Klodpfxeyaymis Ag Ujl Hydraulic Sliding Ramps 14 Lashing Eyes in Omega Floor Floor Height 110 cm

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Klsdpfox Dnb Usx Ag Uol Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Year of construction: 2002, condition: used, machine/vehicle number: 5713, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 Kljdpox Url Uofx Ag Usl - Motor power 0.75 kW

Condition: excellent (used), functionality: fully functional, mileage: 265,170 km, power: 162 kW (220.26 HP), first registration: 02/2011, empty load weight: 4,900 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 5,400 mm, loading space width: 2,500 mm, Year of construction: 2011, Equipment: cable winch, trailer coupling, MAN TGL 8.220 / Trailer / Winch / Remote control / Payload: 8,290 kg • Manufacturer: MAN • Model: TGL 8.220 • Mileage: 265,170 km • First registration: 02/2011 • Power: 162 kW / 220 hp • Winch: Ramsey, electric • Radio remote control • Trailer hitch • Loading ramps • Loading platform: 5.40 meters • Axle configuration: 4x2 • Wheelbase: 4.20 meters (between 1st and 2nd axle) • Transmission: 6-speed manual • Suspension: leaf/air • Differential lock • Capacity: 3-4 cars • Euro 5 emission standard • Curb weight: 4,900 kg • Payload: 2,590 kg • Gross vehicle weight: 7,490 kg Kledoxwbw Aspfx Ag Ujl ----- Trailer • Manufacturer: Silver • Model: SRBP10 • First registration: 02/2006 • Loading platform: 9.70 meters • Suspension: air/air • Curb weight: 4,300 kg • Payload: 5,700 kg • Gross vehicle weight: 10,000 kg • German vehicle • German documents • Immediately available for operation • This offer is non-binding and subject to prior sale. - Intermediate sale reserved - Errors and/or typographical mistakes excepted - Sale in accordance with our general terms and conditions.

Condition: excellent (used), functionality: fully functional, overall weight: 7,490 kg, axle configuration: 4x2, first registration: 04/1998, next inspection (TÜV): 01/2026, suspension: steel, Year of construction: 1998, mileage: 162,990 km, power: 114 kW (155.00 HP), fuel type: diesel, emission class: euro2, fuel: diesel, load capacity: 200 kg, Equipment: crane, MAN 8.163 LC/Ruthmann Aerial Platform TL 300/30 meters/TÜV: 01.2025. • Manufacturer: MAN • Model: 8.163 LC • Mileage: 162,990 km • First registration: 04/1998 • Power: 114 kW/155 hp • Drive configuration: 4x2 • Aerial work platform: Ruthmannsteiger TL 300 • Working height: 30 meters • Transmission: Manual • Suspension: Leaf spring (front and rear) • Basket capacity: 200 kg • 4 extensions • 4x hydraulic outriggers • Heating • TÜV valid until: 01/2026 Kljdpexuu H Ejfx Ag Uel • Perm. gross weight: 7,490 kg • German vehicle • German documents • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: Klodox A U Ncepfx Ag Uol • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, mileage: 445,000 km, Year of construction: 2002, Year of construction: 2002 Ksdpfxox U Dtdj Ag Uell

Condition: used, mileage: 447,886 km, power: 103 kW (140.04 HP), first registration: 11/1997, fuel type: diesel, overall weight: 7,495 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2025, color: blue, gearing type: mechanical, emission class: euro2, loading space length: 5,040 mm, loading space width: 2,311 mm, loading space height: 350 mm, * Flatbed * Loading ramps * Remote-controlled winch * Car trailer hitch * Air suspension * CD radio Kedjxy Eh Depfx Ag Uell ----Internal vehicle number: 11544-----Errors and prior sale excepted WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, mileage: 224,045 km, power: 315 kW (428.28 HP), first registration: 09/2018, fuel type: diesel, axle configuration: 3 axles, color: yellow, gearing type: automatic, Equipment: air conditioning, parking heater, * Multifunction steering wheel * Air conditioning * Auxiliary heater * Sleeper bunk * Rear-view camera * Cruise control * Full air suspension * Omars body * Winch * Remote control Klodpfx Ajwta Areg Ujl -----Internal Vehicle Number: 11087----Subject to errors & prior sale WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, mileage: 406,080 km, power: 162 kW (220.26 HP), first registration: 04/2012, fuel type: diesel, overall weight: 7,490 kg, color: yellow, gearing type: automatic, Equipment: air conditioning, navigation system, * Multifunction steering wheel * Air conditioning * Navigation system * Rear-view camera * Air suspension * Cruise control * Engine brake * Sleeper bunk * Cool box Klsdpfx Asx Izdgsg Usl * Ball-head coupling * Unladen weight: 5,535 kg ----- Internal vehicle number: 11585 ---- Subject to errors and interim sale WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to write to us conveniently via WhatsApp WhatsApp WhatsApp

Condition: excellent (used), mileage: 575,974 km, power: 132 kW (179.47 HP), first registration: 02/2014, fuel type: diesel, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2014, Equipment: AdBlue, = Additional options and accessories = - PTO (Power Take-Off) = Notes = WMAN13ZZ4EY312503 = Further information = Pump: Yes Technical condition: very good Optical condition: very good Please contact Sales for further information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber) MOB: Dutch (Available on WhatsApp and Viber). When paying by bank transfer, the funds must be transferred to our bank account below. Always check the payment details as listed on our website. If you have received different information, please contact us. Kljdpfxswxmdge Ag Ujl If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: excellent (used), mileage: 331,000 km, power: 102 kW (138.68 HP), first registration: 08/1991, fuel type: diesel, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 4,250 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro2, suspension: steel, Year of construction: 1991, = Additional options and accessories = - 5-speed manual transmission - Heated mirrors - Passenger bench seat - Leaf spring suspension - Driver’s comfort seat - High beam - Speed limiter - Main battery switch - Hydraulic system - Radio/CD player - Rotating beacon - Third seat with seatbelts - PTO (Power Take-Off) - PTO (Power Take-Off) = Remarks = PERFECT CONDITION MERCEDES-BENZ 814 ECOLINER (6-CYLINDER) 4x2 FULL STEEL SUSPENSION RECOVERY TRUCK WITH HYDRAULIC RAMPS, WINCH & MANUAL GEARBOX!! 140HP, 6-CYLINDER ENGINE!! 5-SPEED MANUAL GEARBOX!! STEEL SUSPENSION!! P.T.O.!! ETC.!! CAR TRANSPORTER BODY: LENGTH x WIDTH x HEIGHT approx. 5.90 x 2.30 x 0.65 - 1.15 m!! HYDRAULIC RAMPS!! WINCH!! TRUCK IN PERFECT WORKING & DRIVING CONDITION, READY FOR RECOVERY OR CAR / MACHINE TRANSPORT JOBS!! MORE MERCEDES-BENZ 4x2 / 6x4 / 6x6 / 8x4 / 8x8 TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! Klodpfow I Halex Ag Ujl SHIPMENT, STACKING, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US, WE ARE A “ONE STOP SHOP” COMPANY!! PLEASE ALSO VISIT OUR WEBSITE; YOU CAN ALSO CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Additional information = Technical information Number of cylinders: 6 Engine displacement: 5,958 cc Transmission Transmission: 5-speed manual gearbox Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 3,100 kg; Steered; Tyre tread left: 90%; Tyre tread right: 90% Rear axle: Twin tyres; Tyre tread left inside: 90%; Tyre tread left outside: 90%; Tyre tread right inside: 90%; Tyre tread right outside: 90%; Reduction: single reduction Weights Unladen weight: 4,660 kg Payload: 2,830 kg GVW: 7,490 kg Functional Body make: FALCOM CAR / MACHINE RECOVERY TRUCK WITH WINCH Max. number of cars: 1 Loading platform height: 100 cm Condition Technical condition: very good Visual condition: very good Further information Please contact our Sales Department or Erik Engel for more information.

Condition: refurbished (used), Year of construction: 1992, operating hours: 3,998 h, functionality: fully functional, machine/vehicle number: 100175, We are selling a used Franke drum washing system for washing bulk goods, primarily for turned and milled parts. Facilities of the facility: Tanks made entirely of stainless steel 600 liter washing tank with 18 KW heating Klodoqwnypjpfx Ag Uel 600 liter flushing tank with 18 KW heating Insulation of both tanks Weekly timer for the heating Washing drum can be switched via rotary button, 360° rotation or standstill when washing and rinsing including speed sensor Exhaust fan with 900 m3/hr. Oil separator over large disc skimmer with pan and ball valve automatic water dosing / Geka coupling at the rear 2 washing baskets 530 x 300 x 200 mm with tension lid, mesh size 6x6 mm 50 kg load per washing basket Pneumatic door opening and switching from washing to rinsing To be attached to the front frame as a basket support with 4 M12 screws Drain taps for washing and rinsing tanks as well as two large maintenance hatches Good accessibility on all sides, 2 x folding doors at the front and the remaining side walls can be removed using quick-release fasteners Rexroth pneumatics Grundfos stator pump in the washing and rinsing tank 63 A Mennekes plug with 5 meter cable Rital control cabinet with accessories inside operation manual Machine ready for immediate use Delivery and commissioning possible after consultation and cost assumption If you have any further questions, please write or call

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 9850, total length: 7,500 mm, overall weight: 900 kg, input voltage: 400 V, Equipment: documentation/manual, Sale of an LCT T 600 demonstration pass-through washing system from 2024 at a special price Zones of the pass-through washing system: Zone 1: Main washing zone: Length: approx. 2600 mm Pump: 7.5 kW, 60 cbm/h Tank capacity: approx. 400 l Water heated with 3 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Klsdpfewpq Evox Ag Uol Zone 2: Rinse zone Length: approx. 2200 mm Pump: 3 kW, 33 cbm/h at 3 bar Tank capacity: approx. 350 l Water heated with 2 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 3: Hot air drying zone: This serves for all-around mechanical air blowing (from below, the sides, and above) of the water droplets located on the surface of the washed goods, which are blown off by air knives and built-in high-pressure fans. The conveyor belt is equipped with a plastic belt. The frame is made of stainless steel 1.4301, has its own drive, and is controlled via the system’s PLC control. The conveyor belt brings the washed goods out of the machine, makes a 90° curve to the left, and then conveys the goods towards the machine entrance (where the items to be washed are placed on the machine). There are 3 photoelectric sensors at different points on the conveyor belt, equipped with special holders and mutually facing reflectors on the stainless steel structure. Belt width 400 mm / height up to 400 mm (At the beginning – 1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) is a buffer zone (1-2 m long). As soon as the buffer zone is filled with returning washed goods, the machine and the conveyor belt stop automatically.

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Kljdpfx Aexpxhvsg Uel Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 720,000 km, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,150 mm, total width: 2,500 mm, Year of construction: 2020, Equipment: air conditioning, electric window regulation, parking heater, power mirror, spoiler, tail-lift, Year of manufacture: 2020 Suspension: air suspension Klsdpjyaauysfx Ag Uol Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Double wheels; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 2: Lift axle; Steering; Tyre profile left: 40%; Tyre profile right: 40%

Condition: new, empty load weight: 9,000 kg, overall weight: 29,500 kg, axle configuration: 2 axles, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 950 mm, suspension: air, tire size: 245 70 17,5, KALEPAR KLP 228V6 - 6 LOADER CAR TRANSPORTER * Statically fulfills more than the actual requirements based on EN 12642 Code XL Annex B and VDI 2700 8.2 and is dynamically tested for passenger cars. ● Semi-trailer body: Chassis consisting of 2 central longitudinal members. ● Surface treatment: Hot-dip galvanized on customer request + ral on the sides ● Brake system: 2S-2M Wabco EBS-E ● Suspension system: Pneumatic system Electrical system: 24 V Aspoeck ● Tires: 8 units 245/70 R17.5 ● Axles: 9-ton axle domestic or imported ● Gates weight: from 8400 kg to 8900 kg ● Total weight of the vehicle: 28,000 kg (10,000 kg fifth wheel + 18,000 kg axles) ● 5th wheel length: from 950 mm to 1050 mm ● Trailer width: 2550 mm ● Trailer length: 13500 mm ● Total length of the semi-trailer: 16500 mm ● 1 year warranty Kledpfx Agji Rau Ee Uol * COC documents (European homologation CE) Video: s:// For more details and other vehicles-> kalepar ///// * Fulfill more than the actual requirements in analogy to EN 12642 Code XL annex B and VDI 2700 8.2 in a static way and is dynamically tested for cars. Semitrailer structure : Chassis composed by 2 central longitudinal beams. ● Surface Treatment : Hot dipped galvanized + ral colour on the sides at customer's request Braking System : 2S-2M Wabco EBS-E ● Suspension System :Pneumatic system ● Electric System :24 V Aspoeck ● Tyres :8 units 245 / 70 R17.5 ● Axles :9 ton capacity axle domestic or imported ● Tore weight : from 8400 kg to 8900 kg ● G.V.W : 28.000 kg ( 10.000 kg 5th wheel + 18.000 kg axles ) ● 5th wheel length : from 950mm to 1050 mm ● Semitrailer width : 2550 mm ● Semitrailer length : 13500 mm ● Total Semitrailer length : 16500 mm ● 1 year warranty COC Documents (European Homologation CE) Video: s:// For more details and other vehicles-> kalepar *The pictures are example. Copyright cannot be claimed.