Used Capper for sale (239)

Condition: excellent (used), 1 X Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). Lsdpfew E Ey Tsx Al Ijhh ✅ Bottle Heigh - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: ready for operation (used), Year of construction: 1999, Complete bottling and jerrycan packaging line up to 10 liters, consisting of: 4-nozzle volumetric filler (last used for filling containers from 1 to 5 liters) Semi-automatic pneumatic capper DIDAC MENDEZ labeller with 2 heads and a maximum label height of 160mm Brand: J. ESQUERDA Model: LL-H/10.000/BS Year: 1999 Lhjdpfjy Ewnpsx Al Ioh

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) Formats: 250 ml – 1000 ml Application: Hot-fill and cold-fill beverage production Container types: Glass bottles and PET bottles (hot-fill) Filling temperature: 10°C – 104°C CO₂ capability: Yes Closures: Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off PET: 38 mm 3-start hot-fill closure Labelling: Cold glue paper labels (optional sleeve labelling available) Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones Bottle dryer | Europool | - | 2007 | High-speed air dryer Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt Conveyors | KHS / Krones | - | - | Complete conveying system Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial Pallet labeller | Logopack | - | - | Pallet labelling system Reverse osmosis system | MWT | - | - | Capacity 800 l/h Lhsdjyx I Awepfx Al Ish

Condition: used, Year of construction: 2016, Overview  This compact filling line for cans and bottles consists of equipment from Wildgoose, Slowbeer, Enos Euro and Millipore and is designed for craft beverage production with flexible batch sizes. The line combines isobaric and atmospheric filling technologies and includes semi-automatic and manual machines for filling, capping, labeling, and product filtration. The core component is a Wildgoose WG1-CE filler (2021), capable of handling both cans and bottles with integrated seaming functionality. With its modular setup, the line is particularly suitable for small to medium-scale producers, pilot production, or specialty beverages such as craft beer, kombucha, cider, or soft drinks. Technical Data  Capacity: Up to 24 units per minute (atmospheric – Wildgoose) Up to 16 units per minute (isobaric – Wildgoose) Additional manual / semi-automatic filling capacity depending on configuration Formats: 20 cl – 1.5 L (depending on machine) Container types: Cans and glass bottles Application: Beer Craft beverages Kombucha Cider Soft drinks Filling technologies: Isobaric filling (carbonated products) Atmospheric filling Manual filling Filtration: 3-stage microfiltration system (Millipore) Configuration: Modular / semi-automatic line Condition: used, good condition Scope of Delivery Can / Bottle Filler | Wildgoose | WG1-CE | Isobaric and atmospheric filling with integrated seaming; 16 cpm (isobaric) / 24 cpm (atmospheric); formats 33 cl / 50 cl | 2021 Manual Bottling Machine | SCH | SCHPK6 | 6-spout manual filler; approx. 250 bottles/hour; formats 20 cl – 1.5 L | 2016 Bottling Machine | Slowbeer | RI4 | 4-spout filler; approx. 350 bottles/hour; formats 22 cl – 1.5 L | 2012 Labeling Machine | Enos Euro | Base | Semi-automatic labeler; approx. 28–30 units/min; formats 22 cl – 1.5 L | 2017 Crown Capper (2x) | Slowbeer | Tap Air Corona | Pneumatic crown cappers; crown sizes 26 / 29 mm | 2012 Microfiltration System | Millipore | 3-stage | Stainless steel construction; 3-stage filtration system | 2016 Additional Information Seaming unit is integrated in the Wildgoose WG1-CE filler The line allows flexible switching between can and bottle filling Ideal for craft production with frequent product or format changes Compact footprint and modular design   Lhjdpfx Aljyxr Ano Ioh

Condition: used, Year of construction: 2006, Used Automatic Filling Monoblock for Olive Oil 20-3 Brand Baratta 4500 BPH The machine is disconnected from the production line, but is in perfect state. It consists of: 20 valves vacuum filling unit, 3-head capping unit 1 size 35×24 aluminum Screw cap machine composed of the following equipment: Bertoli oil 1lt,  500ml, 750ml raises and lowers electric filler raises and lowers electric capper no cap sensor upstream bottle downstream sensors (overflow, lack of bottles) Lhjdjvguvbopfx Al Ijh

Condition: used, Year of construction: 2021, Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi-sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts (documentable) bottle sizes 85, 88, 90, 112 Ljdpjvguv Uefx Al Ijhh 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual, spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante. This isobaric filler is immediately available and delivered in case of purchase. We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine. How to build one isobaric triblock: The isobaric filler can be connected either to an automatic rinsing machine or to one or more cappers. We have 40 Bertolaso SBR grippers and two series of Bertolaso mushroom and satin cappers. One has 6 heads and reaches 9.000b / h, and one has 10 heads and reaches 14.000 BPH We can introduce all the machines in a sterile clean room with a filtration system. You can have the performance of an isobaric triblock with a Used Isobaric Filling Machine for natural cork and mushroom. Productivity can be from 11,000 to 14,000 BPH. It is possible to foresee a periodic maintenance program for isobaric filler to always have excellent efficiency. This involves both having spare parts in stock and foreseeing machine stops for a week/10 days. In case of purchase of the isobaric filler triblock, at least 9.00 meters by 2.50 meters, H 4.00 meters are required. The creation of a clean room guarantees the absence of contamination in the bottling phase.

Condition: used, Year of construction: 1999, Wine Filling Monoblock Bertolaso UNIBLOC 32/40/8/6 for Still Wine: In this wine filling monoblock with depression system, the bottles enter from left to right. The rinser applies a double treatment and has a mobile nozzle, the filler utilizes slight depression with a centralized level adjustment system. Two cappers belong to this filler: an 8 head aluminium screw capper for sizes Ø 31.5 x 18 and Ø 30 x 60 and one a 6 head straight cork corker. It has an hourly production of 9000 b/h for 0.75 L format in processing on still wine. This Wine Filling Monoblock is very efficient in the production of still wine of any density and characteristic. Its valves are patented by Bertolaso and are very efficient in the production cycle. Accuracy also meets the ease of disassembly of the valves: therefore this means more correct and faster maintenance of the taps. In the case of a sale, we can also offer the option of a completely checked or overhauled machine; this however corresponds to a longer time to deliver the monoblock used for Bertolaso still wine. What is included: Dummy bottles for automatic washing connected to CIP One cork elevator and one aluminium screw caps elevator for two screw cap sizes. The layout of the wine filler machine is angular therefore an adequate arrangement in the wine production line must be studied. The CE protection gives easy access to the operator for maintenance. Lhedevguwfjpfx Al Ieh Click here to see all bottle formats of this automatic wine bottling machine that is currently in storage.

Condition: used, Year of construction: 1990, Used Filling Monoblock Cortellazzi 1990 This filling monoblock was built by Cortellazzi in 1990. The model is IPD 24/6 The direction of rotation of this machine is clockwise. The filler has 24 valves and the type of filling it carries out is volumetric. Regarding the type of nozzle it is fixed. The capper, a fundamental part of this filling monoblock, has 6 heads and works with crown caps. Lhsdpfevguq Ssx Al Ioh This machine, used for bottling, has always been kept in excellent condition and is immediately available for sale. Packed and ready to be loaded.

Condition: used, Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. Lhjdpfx Ajvguwlel Ioh The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for still liquids. The washer  is for cleaning the new bottles inside and outside for one-way production. Regular maintenance has been done on all equipment of the line, so it can be reassembled without critical problems. Our professional team can help you realize this project, supporting you both in the tech department and with an engineering consultant.  

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Lhodpfx Asvgu D Ssl Ioh Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 2009, Used volumetric filler GAI year 2009 – 3000 bph Used filling machine GAI 21116 with volumetric filling for sale Lsdpovguy Tefx Al Ijhh This used filler has 16 valves, made in 2009, for cup filling with self-levelling. The machine is in an excellent state of maintenance, combined with a Dakos air blower and an Arol capper for aluminum screw caps. This filling machine is almost new, and is very little used. It was purchased a few years ago for custom production for customers outside the company; the project was to bottle for third parties. This project, however, never saw the light and therefore it remained unused or used very little.

Condition: used, Year of construction: 1999, Used Capping Machine AROL KAMMA year 1999 Introduction to the AROL KAMMA 1999 Capping Machine Initially, the Used capper AROL KAMMA capping machine, launched in 1999, symbolizes efficiency and precision in packaging. Remarkably, it processes up to 7000 bottles per hour (BPH), exemplifying high productivity. Its design, notably featuring six capping heads, not only promotes high throughput but also ensures versatility. Furthermore, the machine’s ability to handle T-caps expands its use across various formats, making it an indispensable asset in bottling. Advanced Functionality for Optimal Performance Significantly, this specific capper is marked by advanced features. Its adjustable-height capping head, a key element, allows adaptation to different bottle sizes and shapes. Consequently, this flexibility maintains consistent capping quality across production lines. Moreover, the cap distribution system, using an innovative cellular centrifugal distributor, guarantees a steady cap supply. This aspect is essential for maintaining the impressive 7000 BPH output, ensuring uninterrupted production. Ledpevgt T Esfx Al Ijhh Safety Features and Robust Design In terms of safety, the AROL KAMMA is exceptionally well-equipped. It includes comprehensive safety measures to prevent accidents and protect operators. Additionally, its construction with high-grade stainless steel isn’t just durable; it also eases cleaning and maintenance. This robust design is vital for continuous operation at high speeds, especially crucial given the substantial 7000 BPH output. Operational Flexibility and Efficiency Regarding operational flexibility, the AROL KAMMA excels. Its speed can be precisely adjusted using an inverter, allowing pace customization for specific production needs. This adaptability ensures seamless integration into various bottling lines with differing speeds and configurations. Also, the bottle entry, designed for left-hand (clockwise) flow, fits a wide range of production setups. Conclusion To conclude, the 1999 KAMMA capping machine, capable of handling 7000 BPH, is a superior choice for demanding bottling needs. It combines speed, precision, adaptability, and safety, making it essential for businesses aiming to boost bottling efficiency and reliability. Lastly, the machine’s lasting design and advanced technology make it a wise investment for companies.

Condition: used, Year of construction: 2009, Used overhauled filling triblock ALFATEK Elvira 16-20-3 year 2009 Initially, the ALFATEK Elvira 16-20-3 filling triblock, created in 2009, stands as a benchmark of engineering excellence for bottling in glass containers. 1. Model Description and Operational Capability Configured for an impressive throughput of 4,000 bottles per hour (BPH), it specifically targets handling 0.75-liter glass containers. Furthermore, the Filling Triblock Alfatek Elvira integrates three main operational modules: the rinser, the filler, and the capper. Each module is meticulously tailored for a distinct phase of the bottling process, ensuring a streamlined operation. 2. Rinsing Unit of the Filling triblock Alfatek Elvira The Filling Triblock Alfatek Elvira is equipped with 16 grippers, the rinsing system ensures containers are thoroughly cleaned before filling. Consequently, the gripping mechanism is ingeniously designed to handle glass containers with the utmost care, thereby preventing any potential damage. Lodpfovgt H Ejx Al Ijhh 3. Filling Mechanism Moreover, the filling segment incorporates 20 valves, operating on a high vacuum principle to achieve precise filling. This method not only ensures uniform fill levels across all containers but also allows for efficient dispensing of liquids of varying viscosities, thanks to the selection of fixed nozzles. 4. Capping System Subsequently, the capping unit, fitted with three heads, is adept at applying aluminum screw caps with unparalleled precision. It demonstrates the exceptional versatility of the Filling Triblock Alfatek Elvira in handling various cap types, thus ensuring a consistent secure seal consistently. 5. Safety Measures and Maintenance Protocols Additionally, the Filling Triblock Alfatek Elvira adheres to stringent industrial safety standards, featuring comprehensive protective measures for operator safety. Presently stored under optimal conditions, it is accompanied by a complete set of maintenance manuals. This pivotal aspect is crucial for maintaining the machine’s operational efficiency and extending its longevity. 6. Electrical Specifications and Mechanical Design Requiring an electrical supply of 380 V at 50 Hz is perfectly aligned with standard industrial requirements. Moreover, its clockwise rotational movement is thoughtfully designed for seamless integration into existing production setups, thereby facilitating effortless adoption. 7. Conclusion of the Filling Triblock Alfatek Elvira In conclusion, the ALFATEK Elvira 16-20-3 triblock from 2009 epitomizes advanced engineering, effectively optimizing rinsing, filling, and capping operations in bottling processes. Its technical configuration renders it ideally suited for robust application within the bottling industry, achieving high marks for operational efficiency, precision, and reliability. The meticulous design assures compatibility with a broad range of bottling requirements, securely positioning it as a valuable asset in production environments. Ultimately, the incorporation of transition words aims to enhance the flow and coherence of the analysis, ensuring a comprehensive understanding of the machine’s capabilities.

Condition: used, Year of construction: 2021, New Filling Monoblock Bertolaso 30/30/4 – PET/Glass up to 6500 bph Notice: Brand NEW Bertolaso monoblock, never used. Zero working hours. Pristine condition. The perfect opportunity to purchase a new monoblock at a used price. This new Bertolaso 30/30/4 monoblock emerges as an advanced technological solution, specifically designed to optimize filling operations for syrups filling system. Manufacturer and Model: Produced by Bertolaso, a benchmark name in the industry, this monoblock stands out for its performance and build quality. The model specification, 30/30/4, combined with its production year, 2021, provides crucial information on its current relevance in the bottling solution landscape. Speed and Capacity: With a speed of 6500 BPH, this filling monoblock Bertolaso can handle both PET and glass containers, ensuring accuracy and consistency in the filling process. Rinser: The rinser is equipped with 30 grippers and offers a single treatment. Filler: With 30 valves and a high vacuum filling system, it guarantees accurate and uniform filling of containers. The mobile nozzle highlights the filling monoblock Bertolaso’s ability to adapt to various operational needs. Capper: The capper of the filling monoblock Bertolaso, with 4 heads, is versatile in handling different types of caps, both aluminum screw and press-on plastic. Its ability to handle caps of various sizes adds further flexibility to the monoblock. Additional Features: Operational safety is ensured by various integrated features. The clockwise rotation direction and the electrical data (V: 380 and Hz: 50) emphasize the attention to technical details. The filling monoblock Bertolaso comes with manuals, which are essential for operators and maintenance technicians. In conclusion, the filling monoblock Bertolaso 30/30/4 monoblock stands as a reference point for industry experts, combining efficiency, safety, and versatility. Its technical specifications speak for themselves, underscoring the importance of choosing technologically advanced solutions in the bottling arena.   TECHNICAL SPECS Product: syrups Bottles: 700 ml glass Alexanderflasche – Ø 70,1/72,1 x 291 H mm – drawing AZ-01.019.01-03 700 ml Flakon PET – Ø 68,5 x 272,5 H mm – drawing 1304-01-002 1000 ml Flakon PET – Ø 76 x 298,5 H mm – drawing 3041-01-006 1000 ml PET – Ø 74 x 277,4 H mm – drawing 1709-01-003 Lhjdpfxjvgucbo Al Ish 700 ml glass Wodka – Ø 74,6/57,2 x 304,5 H mm – drawing 2807-02W1C 700 ml Vodka STD – Ø 74,6/57,6 x 304,6 H mm – drawing 2597S087  Maximum bottle diameter: 100 mm Minimum bottle diameter: 52±2 mm Maximum bottle height: 360 mm Minimum bottle height: 180 mm Minimum interior neck diameter: 18,5±0,5 mm (Ø 16 mm filling valve) Closures:      a) pilferproof aluminum screw cap – Ø 28 x H 18 mm on bottle n.

Condition: used, Year of construction: 2017, operating hours: 2,000 h, Used filling monoblock for Oil and spirits – Polaris model B6 – speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits; We summarize the main characteristics of our used filling monoblock; and which make them UNIQUE on the market: • Elasticity of work that allows you to switch from one bottle format to another. Acting with simple operations and without replacing parts of the machine; this flexibility is also particularly suitable for those who carry out the third party. • Speed ​​of the format change that can be carried out from 10 to 30 minutes at the most. Given the reduced times, the line can be easily used even for small production batches. • Use of any bottle format; cylindrical, square, triangular, amphorae, flasks, etc. from 0.100 to 2lt in glass and PET. • We designed our labeling system, in such a way as to guarantee the maximum laying precision, on each type of bottle. Lines B6 Can Be Composed By The Following Machine Parts: 10 place rinsing machines uses water from the aqueduct or recyclable liquid. (In this case you can add a recycling unit consisting of a pump) 5 micron filters and liquid storage tank. 10 place blow molding machines, as an alternative to the rinsing machine, if the bottle cannot be wet before filling. The blowing machine allows you to blow prepared air or nitrogen inside the bottle. 10 nozzle fillers. Depending on the type of product. Different types of filling can be used and specifically:  Vacuum in the bottle; (for oils, syrups, spirits or when you want a quick filling). By gravity, with initial slight depression (for wine or foamy liquids). Pressure (for PET bottles or for particular liquids). Automatic washing system inside the filler – Used filling monoblock POLARIS Leveler: which allows obtaining the legal content, It is possible to change the bottle format without changing the nozzle thickness. Capper that can apply various types of caps: screw, pressure, mushroom and Guala etc. To change the type of cap, it is necessary to change a capper accessory. Heat shrink or foil capsule dispenser. For the restriction of the retractable capsules, a restriction stove equip the line for the closure of the foil capsules, and mount rolling heads. Labeling machines for the application of self-adhesive labels on the front, back on the neck or other parts of the bottle. Operational heads for the application of fiscal seals both with paper and glue and self-adhesive L to U, side. Thermal transfer stamp for printing dates of reads and lot numbers on the back label or an ink jet marker, laser, can be applied. Accident prevention protections according to CE standards with doors or electronic barriers. All materials in contact with the product are for food use as per CE regulations. Lhedpfewa Tnzjx Al Ieh In addition, you can add other equipment to carry out further operations, such as: Equipment for other types of caps.

Condition: used, Year of construction: 1998, Used Filling Monoblock OCIM 24-32-8 up to 10000 bph The OCIM 24-32-8 filling monoblock stands as a pinnacle in bottling technology. It offers an unparalleled capacity of up to 10000 bottles per hour. Crafted by OCIM in 1998, this machinery embodies reliability and efficiency. Specifically designed to cater to the demands of filling glass containers, particularly those housing oil products. Technical Details At the heart of this monoblock lies its rinser, equipped with 24 grippers meticulously engineered to ensure a secure hold on the containers. Operating with precision, the rinser utilizes compressed air for treatment, guaranteeing optimal cleanliness throughout the filling process. Moving seamlessly to the filler, which serves as the core component of the monoblock, we encounter a marvel of engineering. Boasting 32 filling valves, this monoblock is capable of handling even the most demanding bottling tasks with ease. Whether employing gravity or a light depression technique, the filler ensures a uniform and efficient distribution of the product, thanks to its fixed nozzle design. Completing the trifecta of functionality is the capper, a critical element in the sealing process. Configured to accommodate aluminum screw caps, the capper features 8 heads operating in harmonious synchronization, rotating clockwise to securely seal each bottle. Lsdpfxevgvufo Al Iehh Current State and Storage Despite its formidable capabilities, the OCIM 24-32-8 filling monoblock currently resides in storage, patiently awaiting its moment to shine. Safeguarded against the ravages of time, it stands as a testament to precision engineering. It is preserved to maintain its integrity and performance. Application and Benefits When deployed, this monoblock transcends mere machinery, becoming the cornerstone of efficient bottling operations. With a capacity of up to 10000 bottles per hour, it revolutionizes production processes. This enables manufacturers to meet the demands of a dynamic market with unparalleled speed and precision. Furthermore, the OCIM 24-32-8 filling monoblock offers tangible benefits beyond its impressive throughput. Its reliability minimizes downtime, ensuring continuous operation and maximizing productivity. Moreover, its versatility allows for seamless adaptation to various bottling requirements, making it a versatile asset in the hands of discerning manufacturers. Conclusion of the Used Filling Monoblock OCIM 24-32-8 up to 10000 bph In conclusion, the Used Filling Monoblock OCIM 24-32-8 represents the epitome of excellence in bottling technology. With its robust construction, innovative features, and unparalleled performance, it stands as a testament to OCIM’s commitment to quality and innovation. Whether in storage or in operation, this monoblock remains a beacon of efficiency, poised to elevate bottling operations to new heights of success.

Condition: used, Year of construction: 2012, Used Kosme Filling Monoblock Completely Refurbished in 2016 Introduction to the Kosme Monoblock The Kosme filler, a filling monoblock with a 24/24/6 configuration for carbonated and still water, stands out for its reliability and high-performance capabilities. Additionally, this machine, refurbished completely in 2016 and unused since then, ensures optimal working condition. Performance and Operational Capacity of the Used filling monoblock Kosme completely refurbished in 2016 This monoblock’s operational capacity is remarkable; it produces 9000 pieces per hour for 330 ml bottles, demonstrating its versatility in handling various bottle sizes, ranging from 50 mm to 105 mm in diameter and from 150 mm to 350 mm in height. Technical Features of the Monoblock Among its key features, the presence of an aluminum cap and an effective rinsing system are noteworthy. Furthermore, the monoblock comes equipped with 24 grippers and utilizes a single treatment. Moreover, the filler incorporates 24 valves with an isobaric filling type and a fixed nozzle, while the capper features 6 heads for aluminum screw caps. The filling machine accommodates caps with dimensions of 28×16 mm. It supports bottle heights ranging from a minimum of 160 mm to a maximum of 350 mm. Furthermore, the machine works with both 330 ml and 750 ml bottles, and it also fills volumes up to 1000 ml, with a minimum capacity of 200 ml. Additionally, this model specifically fills round bottles. Clean Pack in Italy supplied the filler at the end of 2016, and technicians have since fully refurbished it with new spare parts to ensure optimal performance. Current Status and Safety This machine, currently stored in a warehouse, is ready for use and ensures safe operation. Additionally, manuals are included to facilitate easy operation and effective maintenance. Furthermore, the monoblock is equipped with integrated safety features and rotates counterclockwise for optimal operation. Benefits of Purchasing a Refurbished Monoblock Purchasing a used filling monoblock can provide advantages for companies seeking to reduce production costs without compromising quality. Moreover, the Kosme completely refurbished in 2016 offers the opportunity to benefit from the performance of a high-quality machine at an affordable cost. Lhedpfx Aevgvviol Ieh Environmental Impact and Sustainability Choosing a refurbished machine also means reducing the environmental impact associated with manufacturing new equipment. Reusing and refurbishing existing machinery contribute to waste reduction and resource optimization. Conclusion of the Used filling monoblock Kosme completely refurbished in 2016 In conclusion, the Kosme monoblock, completely refurbished in 2016, is an excellent choice for companies seeking a reliable and cost-effective solution for their bottling needs. With its high-performance capabilities and impeccable condition, this machine stands out as an ideal solution to meet the production requirements of various beverages.

Condition: used, Year of construction: 2006, operating hours: 68,702 h, machine/vehicle number: LC624, Used KRONES water bottling line - 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-efficiency PET bottle handling and beverage production. Manufactured by Krones in 2006, it delivers reliable performance for industrial packaging operations at scale. The line integrates blow molding, filling, labeling, coding, shrink wrapping, handle application, palletizing, and pallet labeling, creating a robust end-to-end production solution suitable for second hand markets seeking dependable uptime and consistent output quality.Production speed: up to 32,000 bottles per hourBottle formats: Compatible with 0.5L and 1.5L bottle formatsContainers: Designed for PET bottle handlingManufacturer (core equipment): KronesYear of manufacture (core line): 2006Operating hours recorded: 68702Control platform: Siemens PLCsFilling control: Electronically controlled with flow switches (volumetric)Key models and modules:Krones Contiform S20 blow molder (2006)Krones Volumetic filler (2006)Krones capper (2006)Krones Checkmat bottle inspector (2006)Krones SynCo bottle conveyor system (2006)Krones Etima labeling machine (2006)Markem Smart Lase C350 laser coder (2015)Ocme Vega N70/2 shrink wrapperComag/Decimo HM 100/2 handle applicator (2006)Ocme Pegasus M400 palletizer (2006)Bema Silkworn Turbo pallet stretch wrapper (2006)Eidos 7P6ERLP pallet labeler (2020)M. Tanner AG/Prologic preform hopper (2018)M. Tanner AG preform unscrambler (2006)Gassner cap hopper (2006)Cryotech International nitrogen doserEuropool pack conveyorAdvanced Automation & Control SystemsThe line is equipped with Siemens PLC-based automation for coordinated control across blow molding, filling, labeling, and end-of-line operations. The filler uses electronically controlled flow switches to ensure accurate volumetric dosing and consistent fill levels at high speeds. Centralized controls, synchronized conveyors, and integrated inspection enhance efficiency while minimizing downtime and changeover complexity.Siemens PLC architecture across the production lineVolumetric filling with electronic flow controlIntegrated inspection via Krones CheckmatCoordinated conveyor logic with Krones SynCoLaser coding by Markem Smart Lase C350Production Line Integration CapabilitiesThis production line integrates seamlessly from preform handling through pallet labeling. The Krones SynCo and Europool conveyor systems ensure smooth transfers between modules, while the shrink wrapper, handle applicator, palletizer, stretch wrapper, and pallet labeler complete a fully automated packaging and logistics flow.Inline operation from blow molder to pallet labelerFormat compatibility: 0.5L and 1.5L PET... Lhodpfxjy Icpqe Al Ioh

Condition: used, Year of construction: 1997, Overview This ALWID Matador-HV linear filling machine was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium production environments. The machine operates with a high-vacuum filling principle, enabling level-controlled filling and ensuring consistent fill heights. The filler is equipped with five filling stations and achieves a capacity of approximately 1,000 bottles per hour at 0.7 L. One advantage of the system is that the filler itself does not require format parts, allowing flexible processing of different bottle sizes. The associated capping system can process both PP screw caps and swing-top closures (grip corks). For this purpose, the machine includes two cap sorting bowls, one for each closure type. Approximately ten format sets are available for the capper, covering round and square bottles from 0.2 L to 1.0 L. With its conventional control system and robust mechanical design, the ALWID Matador-HV is a reliable solution for beverage, spirits, or specialty liquid filling applications. Technical Data Manufacturer: ALWID Model: Matador-HV Machine type: Linear filling machine (high-vacuum filler) Year of manufacture: 1997 Filling principle: High-vacuum filling with level control Number of filling stations: 5 Capacity: approx. 1,000 bottles per hour (at 0.7 L) Bottle formats: 0.2 L – 1.0 L Bottle shapes: Round, Square Cap types: PP screw caps T-Cork closures (grip corks) Cap sorting systems: 2 sorting bowls (PP caps / grip closures) Format sets (capper): approx. 10 sets Control system: Conventional control Condition: Used  Lhedoyuufpepfx Al Ieh

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: Screw capper – 11 heads Crown cork capper – 11 heads Closure handling: Integrated closure sorting systems on the machine Bottle Formats: 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request Lodpfxsytqzwj Al Ijhh

Condition: used, Year of construction: 2017, Overview  This atmospheric filling monoblock with crown capper was manufactured in 2017 by Spain Cespedes. The machine is designed for bottling beer or other non‑carbonated beverages in 330 ml glass bottles. The equipment combines a gravity filling system with an integrated crown capping unit. The machine is in good condition and is currently not in use. It is being sold due to an upgrade to a higher‑capacity model from the same manufacturer. Technical data  Capacity: approx. 900 – 1,200 bottles/hour Formats: 330 ml glass bottles Application: Bottling of beer or other non‑carbonated beverages Configuration: 8 gravity filling valves, 1 crown capping head Neck finish: Crown cap Ø26 mm Utilities: 400 V / 50 Hz Dimensions: approx. 2,260 x 850 x 2,250 mm Weight: approx. 900 kg Lhedpfx Aoythvljl Ioh

Condition: used, Year of construction: 2017, Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surface filling Lowering and raising the filling pipe during the filling process Scope of delivery: Filler Capper Cap sorting unit Cap alimentation Lhodpfx Aewwq Sfol Ioh

Condition: used, Year of construction: 1994, operating hours: 34,000 h, machine/vehicle number: LC613, Used line tetra pak TBA 8 - 1L slim 6000 PPHTechnical Specifications & Performance DataThis second hand complete bottling line is engineered for industrial packaging of aseptic carton containers, centered on the renowned Tetra Brik Aseptic platform. Designed for beverage production environments that demand hygiene and reliability, it provides end-to-end handling from aseptic filling through cap application to final case packing. As a used bottling line, it offers a cost-effective route to expand capacity while maintaining quality standards.Main filler: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMConstruction year (main filler): 1994Package format: 1.0L Slim cartonSpeed: 6000 Packs/hour (PPH) Auxiliary equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line application: Aseptic carton filling with downstream capping and case packingCompliance: CE markedAdvanced Automation & Control SystemsThe line leverages factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and operator-friendly control. Safety interlocks and guarded access points support secure operation during beverage production. Standardized control architecture streamlines start-up, shutdown, and recipe management for the 1.0L Slim carton format.Centralized operator interface for coordinated filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency-stop devices for protected operationDesigned to support quick diagnostics and routine maintenance tasksProduction Line Integration CapabilitiesThis used bottling line integrates aseptic filling with cap application and case packing to create a cohesive industrial packaging solution. It is suitable for beverage production environments requiring carton handling and end-of-line packing. The cap applicator 21 and cardboard packer 70 are configured to work inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput.Inline configuration from filler to cap applicator to case packerOptimized for 1.0L Slim carton containersCompatible with standard conveyor and accumulation layoutsDesigned for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a second hand, complete bottling line in working condition and ready for operation. It presents an efficient option for facilities seeking a pre-owned aseptic carton solution without the lead times typical of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operational status: Ready for operationCommercial status: Used/second hand industrial packaging lineOperational Performance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, engineered for stable, hygienic beverage production. Downstream, the cap applicator 21 ensures accurate closure application, while the ... Lhjdpfx Aleyvpt Eo Ieh

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data manufacturer: Krones model: Volumetic (filler) / Variojet (rinser) year of manufacture: 2001 filling valves: 120 rinsing stations: 88 rinsing channels: 2 (currently ClO₂ and fresh water) formats: 1.0 L GDB PET-MW 0.5 L GDB PET-MW POC 1810 closures production capacity: 32,000 bph at 1.0 L direction of rotation: clockwise availability: beginning of October 2026 Lsdpfxeyluwts Al Iehh

Condition: used, Year of construction: 2004, machine/vehicle number: LC617, Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomodul labeller, Krones Linapac autopacker, Krones Variocart C-40 case erectors (x2), Krones Variocol H-120 case sealer, Garvens E40-DMS checkweighers (x2), Videojet 3330 laser coders (x2)Years of manufacture (predominant): 2004 core line, with labeling and coding upgrades in 2015 and 2016Line scope: Fully integrated from depalletizing, rinsing, filling, capping, labeling, inspection, coding, packing, case forming and sealing, to conveyingAdvanced Automation & Control SystemsThe line features comprehensive automation across all stations to ensure stable, synchronized operation at 18,000 bph. Continuous multi-head capping from Zalkin enables consistent closure application. In-line inspection and weighing provide real-time quality control and automated rejection. Laser coding and case printing integrate seamlessly for traceability and compliance within beverage production.Integrated controls for coordinated machine operation and changeoversIn-line inspection (fill level/visual) and checkweighing with automatic rejectLaser coders for high-speed, permanent coding on glass containersEnd-of-line automation including autopacking, case forming, and sealingProduction Line Integration CapabilitiesEngineered as a cohesive, second hand packaging system, the line offers end-to-end integration and stable handling of glass bottles. It is suitable for spirits bottling with format flexibility across common 0.7L, 0.75L, and 1.0L sizes. The conveyor network covers container, pack, and pallet levels, supporting streamlined material flow and efficient accumulation.Inline operation from depalletizer to labeller and end-of-lineFormat flexibility across 0.7L, 0.75L, and 1.0LFull conveyor network for containers, packs, and palletsCompatible with additional upstream/downstream equipment as requiredMachine Condition & Maintenance HistoryThis used bottling line has been maintained to a very high standard with regular OEM servicing. It is currently in production with excellent operational performance and strong reliability. Availability is planned for October–November 2026, allowing for structured decommissi... Lhodpfx Aeyzz Hhel Ieh