Used Cantilever Arm Shelf for sale (6,678)

Condition: new, mileage: 500 km, power: 338 kW (459.55 HP), axle configuration: 8x4, color: white, driver cabin: day cab, gearing type: automatic, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at...). Iveco X-Way AD320X46BZ OFF 8x4 roll-off tipper. Body: HIAB ULT 26S53-W-ITF, wheelbase: 4,250 mm, Speedline aluminum rims, SLT, Rocking Mode (free-swing mode), roof hatch, mechanical version, cab rear wall with window, recommended for open bodies to observe rear traffic, air suspension for the cab, protective grille for headlights, transparent sun visor, installed on the outside of the cab roof, preparation for rotating beacon lights, flat roof painted in cab color, hot water circulation pump, suitable as a rest heating system, residual heat from the coolant is used and circulated in the system, passenger seat static, integrated 3-point safety belt in red, driver's seat luxury, air-suspended, heated, 4-way adjustable, lumbar support and headrest, with integrated 3-point safety belt in red, leather steering wheel, signal horn behind the bumper (compressed air), sun blind roller for side window, driver and passenger side, ashtray in center console, exhaust pipe raised behind the cab, parabolic suspension 2-layer, SL, parabolic spring on the front axle 1-leaf design (Super Loader), without jack, radiator cover under the bumper for rough off-road use, battery charging socket, clamps, fuel tank 210 liters, aluminum, maneuvering and towing hitch, rear axle ratio: 3.09, CAN bus interface CAN-OPEN for body control, infotainment 10 TFT display, without ECO-Roll transmission software (freewheeling function), adaptive cruise control (ACC), side marker lights, emergency braking assistant (AEBS), warning sounder for reversing, switchable, underrun protection on the side, electric parking brake, hazard warning lights, electronic stability program (ESP), front headlights LED, LED rear lights, fog lights including cornering/turning lights. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved!!! Aluminum rims, ESP, navigation system, auxiliary heater, particulate filter Ledpfx Aozurh Hjbyehn Cab: Local transport = Further information = Engine displacement: 13,000 cc GVWR: 32,000 kg Contact Tobias Ebert for further information.

Condition: good (used), - Pneumatic Motor GAMOR - Reinforced parallelogram structure made of hard aluminum - Table mounting column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900 mm – min: 200 mm - Working air pressure: max 7 bar – 840 l/min - Weight: 18 kg The welding table is not included in the sale (as shown in the pictures), only the machine, which can be mounted again on a table or similar base. Transport and loading can be organized Europe-wide upon request and at additional cost. Prices plus VAT. Lhjdezvnhfspfx Abyen Inspection possible by appointment. Contact us – our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please reach us via the contact form.

Condition: used, This package includes: 20 x crossbeams, 2,700 mm each (yellow) 40 x securing pins - Remaining stock - Lsdszuyrmopfx Abyjhn Manufacturer: Tegometall Condition: used, good condition Crossbeam length: 2,700 mm Crossbeam height: 140 mm Shelf load capacity: 3,000 kg Accessories such as: Floor mounting Connectors Load warning labels Impact protection Guard rails Grating Back panel grating Deep shelf supports Barrier railings and much more... Just ask us! "Benefit from over 20 years of industry experience – we will provide you with competent and personal advice as your experienced specialist retailer for new and used shelving systems." Sales and Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer Status: All offers are subject to change and non-binding. We reserve the right to sell items in the meantime. - Reservation of Title: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive sale to commercial businesses (§ 14 BGB). For used and IIa goods, there is an exclusion of liability for material defects. For new goods, the respective manufacturer's warranties apply.

Condition: used, This package includes: 38 x crossbars, 2,700 mm each (yellow) 76 x locking pins - Remaining stock - Manufacturer: Tegometall Condition: used, good condition Crossbar length: 2,700 mm Crossbar height: 130 mm Shelf load capacity: 2,700 kg Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guard rails Grating Rear panel grating Deep shelf supports Barrier rails and much more... Just ask us! Lodpfxezuyrto Abyehn "Benefit from over 20 years of industry experience – we provide competent and personalized advice as your experienced specialist retailer for new and used shelving systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are subject to change. Items may be sold subject to prior sale. - Retention of title: Ownership of the goods remains with us until full payment has been received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials and workmanship is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: excellent (used), mileage: 461,762 km, power: 309 kW (420.12 HP), first registration: 10/2001, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 8,500 mm, total width: 2,500 mm, total height: 3,460 mm, Year of construction: 2001, = Additional Options and Accessories = - PTO = Further Information = Lsdeznn Dwepfx Abyjhn Technical Information Number of cylinders: 6 Axle Configuration Front axle: Steered; Suspension: Leaf spring Rear axle 1: Twin tires; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Twin tires; Suspension: Air suspension Weights Unladen weight: 11,550 kg Payload: 14,450 kg GVW: 26,000 kg Functional Pump: Yes Condition Technical condition: very good Optical condition: very good Further Information Please contact Thierry Leemans for more information.

Condition: new, Technical Data for the Shelf Panel: Shelving System: Meta Type: Clip Scope of delivery includes: 01x Shelf panel, used Shelf designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 500 x 40 mm Weight: 3.41 kg/piece Maximum load per shelf: 150 kg, with evenly distributed load. 04x Shelf support brackets 40 mm, used, galvanized silver, suitable for steel shelves with 40 mm upturned edge Finish: Zn blue + therm 4h, galvanized Color: Silver Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Lodpfx Ajy H Hkpsbyjhn General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested individually depending on the delivery location and scope of delivery.

Condition: good (used), Cable rack for large cable reels Consisting of 7 uprights Depth: 0.81 m Bays: 0.75 + 0.75 + 0.855 + 0.855 + 0.945 + 1.05 + 1.05 m width – upright width: 8 x 0.10 m Ledpfey I U Tbsx Abyjhn Height: 5.06 m

Condition: good (used), Year of construction: 2003, Technical condition: good Visual appearance: good Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Lsdpfxszuclpo Abyjhn Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), mileage: 492,693 km, power: 338 kW (459.55 HP), first registration: 03/2018, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 6x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 8,600 mm, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, navigation system, power assisted steering, = Additional options and accessories = - Aluminum fuel tank - DAB - Heating - Mirror heating - PTO - Radio/CD/Audio system - Reversing camera - Sleeping cabin - Sun visor - Tipping hydraulics = Remarks = TRANSPORT TO ANTWERP 590 EURO = More information = Front axle: Tyre size: 315/80 R22.5; Steering; Suspension: parabolic suspension Rear axle 1: Tyre size: 315/80 R22.5; Double wheels; Suspension: air suspension Lhodezw Hkzopfx Abyen Rear axle 2: Tyre size: 385/65 R22.5; Lift axle; Steering; Suspension: air suspension Empty weight: 11.510 kg Technical condition: very good Visual appearance: very good

Condition: good (used), Technical data for the shelf connector: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x shelf connector, used for shelf spacing: 700 mm Total length: 700 mm Cross section: U 35x25 mm Material thickness: approx. 2.00 mm Material color: blue Drill hole diameter: 11 mm Weight: 0.930 kg | piece 02x screws M10 x 35 mm 02x nuts M10 Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Lodpfsvpvyyjx Abyohn General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Lhsdpsmhhf Sofx Abyjn When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Ledpfx Abemhhl Heyshn Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Lsdpsmhh Dtefx Abyshn - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth Lodsmidyfopfx Abyehn 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. The oil drip tray is used for the storage of non-spillable or opened containers such as paint cans, paint buckets, cleaning agents, etc. The oil drip tray can be optimally placed in a shelf rack. The scope of delivery includes: 01x oil drip tray, II. choice (new goods) Manufacturer: SSI Schäfer Lhjdpfx Ajn Atm Debyon Type: OAW 4800 Material color: sendzimir galvanized Capacity: approx. 60 liters load capacity: 200,00 kg total width: approx. 1.020 mm Usable width: approx. 970 mm Total depth: approx. 790 mm Usable depth: approx. 784 mm Total height: approx. 125 mm Useful height: approx. 95 mm Material thickness: approx. 3.00 mm Weight | pc.: approx. 26,960 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the unit carrier: Manufacturer: SSI Schaefer Rack system: R 3000 Included in delivery are: 02x shelf beams, II. choice (new goods) Material color: sendzimir galvanized Type: KTRZ 31036 Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm perforated grid: approx. 53 mm agraffe: 3 HK (hooks) weight | pcs.: 1,700 kg max. load per truss pair 200 kg with evenly distributed load 02x unit truss, II. choice (new goods) material color: sendzimir galvanized total length: approx. 780 mm clear span: approx. 715 mm dimension: approx. 40 x 35 mm (WxH) material thickness: approx. 1,50 mm 01x wooden shelf, II. choice chipboard width: approx. 985 mm chipboard depth: approx. 717 mm material depth: 22 mm Your contact persons in our company: Mr.: Andre Evering Lodpfx Asn Hqq Robyshn Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Material color: blue Manufacturer: Feralco for shelf spacing: approx. 200 mm Overall length: approx. 200 mm Profile dimensions: approx. 20 x 20 mm Headplate: approx. 100 x 40 x 4 mm Borehole diameter: approx. 9 mm (2 pieces per side) Weight: approx. 0.41 kg | piece Lodpfok Iuhfsx Abyehn

Year of construction: 1990, condition: good (used), REFORM RB32-10 radial arm drilling machine drilling capacity 32 mm MK 4 holder throat 1000 mm quill stroke 280 mm drive power 3 kw Lsdpfom Sg R Dsx Abyjhn spindle speed 22 - 2000 rpm Weight 2 to

Condition: good (used), The scope of delivery includes: 01x Pressed grate, used Material color: hot-dip galvanized Total depth: 990 mm (bearing bar direction) Total width: 1.195 mm (cross bar direction) bearing bar dim.: 40/2.0 mm frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | pcs. Internal designation: L Remark: - The frame has been flanged inward from all sides. - The gratings may have damage, scratches, dents, welds, etc. General information about the item: This item is offered for pickup only. A beyond desired transport or a shipment of this article is associated with additional Ljdpfx Aonbfhaobyshn additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x inlaid shelf grate, used Material color: hot-dip galvanized Total depth: 1.175 mm (supporting bar direction) clear support width: 1.097 mm Total width: 890 mm (cross bar direction) bearing bar dim.: 50/1.80 mm Frame height: 50 mm crossbar support: 40 mm Mesh size: 90 x 60 mm Weight: approx. 14,11 kg | pcs. Internal designation: GR-17 Remark: - The gratings may have damages, scratches, dents, welds. - The inserted shelf gratings are suitable in spite of the 40 mm crossbar support for a rack depth of upright depth of 1,200 mm. Lodpfxenh Rb Ne Abyohn General information about the article: This item is offered for pickup only. A transport or shipment of this desired transport or shipment of this item is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Lhodjpbvgtjpfx Abyjn Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4170 Total length: approx. 170 mm Useful height: approx. 95 mm TubeØ: approx. 12 mm Weight / pc.: approx. 0,030 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the pipe bracket: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf beams Frame depth: 800 mm Included in delivery 01x tube stirrup, II. choice (new goods) Partly with stirrup pad Type: KTB 80 Lhodpjpbvw Hsfx Abyjn Material color: galvanized Total height: approx. 420 mm Total depth: approx. 754 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,250 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Lhedpsmqk Svsfx Abyen Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 360 mm Ledpfxjmqldke Abyohn total length: 360 mm cross section: U 35x25 mm material thickness: ca. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,480 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, total length: 500 mm, The price is for 1 piece of ROBOT EXTENDER Code: KRC2 360-500 ROBOT EXTENDER Length: 25 cm & 50 cm Brand: KUKA Condition: USED Lhjdpfx Aomrqwyobyon Extender – 50 cm | Price: €1,300