Used Calibration Ball for sale (4,183)

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss Dodpszd Uv Eofx Acyekw 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Year of construction: 2020, condition: used, This listing is for Agilent Technologies Magnis NGS Prep System The unit is in full working condition and ready for immediate use Dkjdpfx Aco Aaq Slsyow The Agilent Magnis NGS Prep System is a compact, fully automated benchtop platform designed for next-generation sequencing library preparation. It streamlines complex workflows, offering walk-away automation, consistent reproducibility, and high-quality results for genomics laboratories. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 966 h, MAZAK OPTIPLEX NEXUS 3015 FIBER - 4 kW CNC Fiber Laser Cutting Machine Price: EUR 190,000 net Condition: Used – VERY LOW OPERATING HOURS Resonator: IPG YLS-4000 U VERY LOW WORKING HOURS The machine has exceptionally low operating hours. The IPG resonator and critical components are in near-factory condition: - Practically full remaining lifespan of the IPG resonator (rated for up to 100,000 h) - Minimal wear on the optical system, Multi-Control Torch 2.1 head, and linear guideways - Cutting quality and precision comparable to a new machine - Operating hours confirmed by CNC readout – documentation available upon request or during inspection TECHNICAL SPECIFICATIONS Model: Optiplex Nexus 3015 Fiber Laser Type: Ytterbium fiber laser Resonator: IPG YLS-4000 U Laser Power: 4.0 kW Max. Sheet Size: 1,525 x 3,050 mm Max. Pallet Load: 930 kg Travel (X/Y/Z): 3,100 / 1,580 / 150 mm Rapid Traverse (X/Y): 60 m/min (85 m/min combined) Drive X1/X2/Y: Rack & pinion, direct-drive Drive Z: Servo, ball screw Accuracy X/Y: ±0.05 mm / 500 mm Repeatability: ±0.03 mm Head: Multi-Control Torch 2.1, F125-F200 mm Assist Gases: O2, air, third gas; 0.02–2.5 MPa CNC: Mazatrol Preview G, 19" touchscreen Pallet Changer: Automated, 2-pallet Weight: Approx. 12,850 kg Power: 380–480 V, max. 18 kW CUTTING CAPACITY (4 kW) Mild steel O2: 20 mm Mild steel N2: 4 mm Stainless steel N2: 15 mm Aluminum N2: 15 mm Copper O2: 8 mm Brass N2: 8 mm INTELLIGENT FUNCTIONS (INCLUDED) Automatic nozzle changer (8 nozzles), auto focus positioning, focus detection, auto profiler calibration, auto nozzle cleaning, beam diameter control, pierce/plasma/burn detection, fine power ramping, flash cut. SCOPE OF DELIVERY (INCLUDED IN PRICE) Cast-iron frame (foundation-free installation), Mazatrol Preview G CNC 19", Multi-Control Torch 2.1 head with 8-position nozzle changer, OPTIPOD module, automatic 2-pallet changer, chiller with 6 m hoses, cutting nozzles 1.2/2.0/3.0 mm plus 5 adapters, laser edge detection, numerical gas pressure control, multi-tap transformer, slatted table (100 mm spacing), tools, documentation (PL/EN). OPTIONAL EQUIPMENT – NOT INCLUDED The laser system can be purchased separately for EUR 190,000. Options below are available at additional cost. OPTION A – PRESSURE-BOOSTING UNIT – EUR 15,000 net Allows cutting with compressed atmospheric air instead of expensive nitrogen, greatly reducing operating costs. Components: 1. Compressor SK 25 / max. 15 bar / SK.2-13318 2. Condensate Drain Ultramat UFM-D03 3. Economizer Ultra-Filter DF 0035 - DF 1100 4. Ultra-Filter DF 0035 - DF 1100 5. Pressure vessel, 500 l Air cutting capacity: mild steel up to 6 mm, stainless up to 4 mm. OPTION B – SHEET LOADING CRANE – EUR 5,500 net Dedpfjy Dgxujx Acyskw Sheet loading crane, lifting capacity up to 700 kg. Enables safe and quick loading of sheets onto the laser pallet. PRICE SUMMARY (NET, EUR) Machine only: EUR 190,000 Option A (pressure unit): EUR 15,000 Option B (loading crane): EUR 5,500 Total with both options: EUR 210,500 COMMERCIAL TERMS - All prices are net, in EUR (VAT not included) - Offer valid for 30 days - Payment and delivery terms to be agreed - Inspection and test cutting available by appointment

Condition: used, BANDELIN SONOREX Industrial ultrasonic cleaning bath / ultrasonic cleaning system BANDELIN SONOREX S 3025 KH Ultrasonic bath with HF generator G 2025 – 2000 W – 25 kHz For sale is a used industrial ultrasonic cleaning system from the manufacturer BANDELIN electronic. The system consists of a SONOREX ultrasonic bath Type S 3025 KH and a separate HF generator Type G 2025 with external timer control. Dodpfx Ao Ad E Ucscyokw The ultrasonic cleaning system is suitable for cleaning workpieces, machine components, and parts in workshops, manufacturing facilities, and industrial plants. Technical data: Manufacturer: BANDELIN electronic Model series: SONOREX Type of ultrasonic bath: S 3025 KH Type of HF generator: G 2025 Equipment type: Industrial ultrasonic cleaning system Country of manufacture: Germany Ultrasonic bath S 3025 KH: Mains voltage: 220–240 V AC Mains frequency: 50–60 Hz HF frequency: 25 kHz HF generator G 2025: HF power: 2000 W HF frequency: 25 kHz Mains voltage: 220–240 V AC Mains frequency: 50–60 Hz Current consumption: 8.7 A Equipment: SONOREX ultrasonic bath in stainless steel design Separate BANDELIN SONOREX HF generator G 2025 External timer with rotary control Control panel with temperature control and indicator lights Analog display on the HF generator Status indicators on the generator Two fans on the front of the generator Cleaning basket / grid insert Cover with handles Drain connection with ball valve Connection cables as shown in the pictures Application areas: Industrial ultrasonic cleaning Cleaning of machine components Workpiece cleaning Workshops Manufacturing facilities Maintenance and repair General commercial cleaning applications Scope of delivery: 1 × BANDELIN SONOREX S 3025 KH ultrasonic bath 1 × BANDELIN SONOREX G 2025 HF generator 1 × External timer 1 × Cleaning basket / grid insert 1 × Cover Connection cables and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of use and cleaning are present Nameplates are present Functional test not documented Dimensions and weight: External dimensions of the ultrasonic bath: to be determined External dimensions of the HF generator: to be determined Total weight: to be determined The workbench shown in the photos and any other items not expressly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: new, functionality: fully functional, ✅ New stock ✅ Immediately available ✅ Shipping possible The SCHORR Disc Mower RR580KRM is a powerful high-grass mower, designed to cut through dense, tall grass and brush with ease. With a working width of 58 cm, it allows you to quickly maintain meadows, roadsides, and orchards. The disc mowing system features four freely swinging blades, ensuring an even and high-quality cut. The swath deposit with a removable swath cloth enables clean handling of cut material without mulching. The RR580KRM is self-propelled and easy to operate—even on slopes or uneven terrain. Its wheel freewheel system allows for agile maneuvering, and mowing drive and wheel drive can be engaged separately. Applications: Dodpfoxvb Ryox Acyokw • Orchard meadows & grassland with tall vegetation • Roadsides, embankments, ditches, and fence lines • Fallow ground, border strips around farmyards, riding arenas, or storage areas Even on slopes of up to approx. 30%, the disc mower stays on track and provides a consistently high-quality cut. The swiveling, ball-bearing glide disc and flexible V-belt drive ensure smooth, low-vibration operation and reduced maintenance requirements. Ergonomics & Transport: The handlebar is height-adjustable and foldable, ensuring comfortable operation and space-saving storage. Weighing around 65 kg, the RR580KRM combines a sturdy build with agile handling. Technical Data: Manufacturer: SCHORR Model: RR580KRM Engine: Air-cooled, single-cylinder four-stroke, 6 HP Drive: Self-propelled Blade type: Freely swinging blades, 4 pieces Weight: 65 kg Dimensions: Length 1070 mm, Width 570 mm, Height 840 mm Cutting height: approx. 30 mm Cutting width: 580 mm Spare parts are always available and our service team is ready to assist with any inquiries. Delivery or collection in 48465 Schüttorf is possible, collections strictly by prior arrangement. Financing or leasing options are also available – our team will be happy to advise you on the different options. The RR580KRM is immediately available, robust, agile, and ideal for both professionals and private users.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: Dodpfx Acjxmfc Usyjkw TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: refurbished (used), Year of construction: 1996, Bridgeport Milling Machine 2HP Variable Speed Rebuilt Machine Table has been reground on 3 Sides Excellent Condition Chrome Bed ways Ball Screw Leadscrews X & Y Axis Table Size 48” X 9” Spindle Speeds 50-4200rpm Brand New X Axis Powered Traverse Brand New 3 Axis Digital Readout ( X & Y & Quill Axis ) Brand New Coolant Pump Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Dkedpfxsgvqkus Acysw 3 Phase 400v Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm work stroke 310 mm dayligth 525 mm column arm 510 mm ram stroke speed 150 mm/sec work speed 9.0 mm/sec return speed 140 mm/sec table height 900 mm oil volume 290 ltr. voltage 400 Volt weight 16300 kg range L-W-H 4550 x 2450 x 2950 mm ----- CNC "C" SERIES electro-hydraulic press brake featuring: * Increased daylight opening (installation height) * Extended cylinder stroke * Increased throat depth * Long-type "full machine cover" ----- Equipment: - DELEM CNC control, model DA-66T, with touchscreen/graphics * 2D graphical touchscreen programming * 3D visualization for simulation and production * 17" high-resolution TFT color screen * Bending sequence calculation * Product programming with true-to-scale visualization * USB interface * Swiveling touchscreen control unit (positioned at the front left) - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, plus CNC-controlled . crowning (anti-deflection) - CNC-controlled motorized backgauge * Travel range: X-axis = 750 mm // R-axis = 250 mm * Travel speed: X-axis = 500-600 mm/s // R-axis = 200 mm/s * Equipped with ball screws * CNC-controlled motorized backgauge fingers (Z1 + Z2) Dksdpfx Ao Afzvljcysw - Sectionalized "gooseneck" (swan-neck) upper tool: ROLLERI 135.85.R08, "System A" * Includes quick-change clamping system * Includes integrated crowning system within the tool holder - Sectionalized 4-V universal die (60x60 mm) - Rear safety system: Light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (including FMSC) - 2x front support arms SLIDING system (HIWIN plain bearings) - 1x freely positionable dual foot control - CE mark / Declaration of Conformity - Operating manual, including electrical and hydraulic schematics * Image shows a machine of similar design

Condition: used, This listing is for a PerkinElmer JANUS G3 Liquid Handling Workstation The unit is in full working condition and ready for immediate use This liquid handling workstation is a high-quality lab instrument manufactured by PerkinElmer (Model: JANUS G3 Workstation). This automated platform features an 8-tip Varispan arm designed for precision liquid transfer, sample preparation, and high-throughput assay automation. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Dksdpfxj Agpwye Acyew specifications_en: Voltage: 100-230 VAC, 50/60 Hz; Power: 350 VA; Configuration: 8-tip Varispan arm; RUO (Research Use Only) model.

Condition: new, This listing is for a Camfil - MG14-565X565X110 HEPA Filter The unit is in full working condition and ready for immediate use This hepa filter is a high-quality lab instrument manufactured by Camfil (Model: MG14-565X565X110). This ProSafe certified HEPA filter is designed for cleanroom and laminar airflow (LAF) bench applications, providing superior air purity with H14 efficiency. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Dodpfxe Agpv Rj Acyjkw specifications_en: Dimensions: 565x565x110mm; Filter Class: H14 (EN 1822); Nominal Airflow: 517 m3/h; Pressure Drop: 77 Pa; Efficiency: 99.999% at MPPS.

Condition: new, This listing is for a Thermo Fisher 12-4906-56 Mother Board (G) for Phadia 250 Circuit Board The unit is in full working condition and ready for immediate use This circuit board is a high-quality lab instrument component manufactured by Thermo Fisher Scientific (Model: 12-4906-56). This is a genuine OEM replacement Mother Board (G) designed specifically for the Phadia 250 allergy and autoimmune testing system. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Dkodpfxo Agpwcj Acyjw specifications_en: Part Name: Mother Board (G), P250; Part Number: 12-4906-56; Lot: KWR3; Origin: Made in Japan

Year of construction: 2020, condition: used, This listing is for a 2020 Grifols Wadiana Compact Immunology Analyzer The unit is in full working condition and ready for immediate use This immunology analyzer is a high-quality lab instrument manufactured by Grifols (Model: Wadiana Compact). The Wadiana Compact is a fully automated instrument designed to process DG Gel cards for pretransfusion compatibility testing, offering a seamless transition from manual to automated workflows. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Djdpfx Acj Agpw Doyjkw specifications_en: 100-120 / 220-240 V, 50-60 Hz, 300 W, 2 x T 4A L 250 V fuses.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer – Rental Available Type: CM 35 Axles and Suspension: Disc brake 22.5" SAF axle assemblies, 3 x 9 tons with air suspension. Axle spacing: 2 x 1310 mm. Lift and lower valve. Load indicator on top of the tank. Wabco Smartboard, Wabco tire pressure monitoring system. 1st axle: Liftable, without air suspension control module. 3rd axle: Liftable with Wabco Optiturn. Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer's choice, on Alcoa Ultra One aluminum rims, 11.75 x 22.5, ET 120. Braking System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, connected brake wear indicator. Landing Gear: Mechanical landing gear with two speeds, 2 x 20 tons support load with swivel foot. Electrical System: All lights in LED design, 24-volt electrical system consisting of: One 15-pole socket mounted in front of the kingpin on the chassis support, yellow side marker lights in the required number, position lights at the rear, clearance lights at the front, license plate lights at the rear, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber lights at the rear at the level of the swivel plate mounted on aluminum consoles according to standard 97/28/CE-2007/35/CE. 2 swivel LED work lights on the upper left and right side of the tank, yellow warning light at the rear, mounted at the height of the hose pipes, 2 reversing lights in the underride protection, 2 reversing lights at the height of the supports (each can be switched off on the power console). Tank Design: One horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-chamber tank, with 35,000 liters volume. Tank warranty: 24 months from delivery. Kingpin 2" according to standard 94/20/CE. Operating Parameters: Pressure vessel according to standard Pressure Equipment Directive PED 97/23/CE. Wall thickness is approximately 5 mm. Test overpressure 3.0 bar – operating overpressure 2.0 bar, operating temperature -40° to +80°. Filling Options: 3 manholes DN 450 with swivel and folding dome covers. The dome covers are sealed with 4 wing nuts each. Support for dome covers at the top for storage. Front rain flap closed, rear open. Material Outlet: 2 material outlet cones with synthetic fabric as loosening insert. Individual discharge lines DN 100 made of steel, combined at the rear. 2 pinch valves DN 100 AKO in the lines, shut-off ball valve DN 100 with ring nozzle. Remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Dkjdpsx Nuf Hsfx Acysw Air Piping: One 2.5" stainless steel air collecting line mounted on the operating side RIGHT. The air line is routed to the front, to the end of the silo with check valve and connecting hose DN 65 for compressor with Storz-B coupling. The air collecting line has ball valves for upper air, additional air and loosening. Upper air 2" at the rear right, PRESSURE LINE INLET AT THE REAR RIGHT, external air connection Storz C on the air line pipe at the rear RIGHT, pneumatic connection with blow-off gun and spiral hose at the top on the walkway in the area of the ladder, 1 vibrator on top of the tank. Air line at the top in the middle of the walkway for cleaning with a gun. Air line at the bottom in the storage box for cleaning with a gun. Ladder and Walkway: 1 aluminum ladder is mounted at the rear left of the vehicle. 1 pneumatic aluminum safety guardrail with locking system acting on the brake. 1 aluminum.

Condition: used, mileage: 490 km, power: 100 kW (135.96 HP), first registration: 06/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space volume: 2 m³, loading space length: 2,800 mm, loading space width: 2,070 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Model Year * Model Year: 2024 Transmission * Manual transmission, 6 gears Driver Assistance Systems * Automatic headlight control * Lane keeping assist * Rear view camera * Driver attention assist * Traffic sign recognition Lights and Visibility * Headlight range adjustment * Rain sensor * Tinted glass * Daytime running lights * Light sensor Audio & Communication * Radio * Digital radio reception DAB * USB connection * Bluetooth hands-free system Dkjdo Aiaaaepfx Acyew * Android Auto & Apple CarPlay Exterior * Leaf spring suspension * Trailer coupling, ball type: d50mm * Electrically adjustable and heated exterior mirrors * All-season tires * Tire repair kit * Connector plug 1x13-pin * Speed limiter: 160 km/h * Touchscreen operation * Folding sideboards Safety * Driver/passenger airbag * Electronic Stability Program ESP * Anti-slip regulation ASR * Anti-lock braking system ABS * Tire pressure monitoring system * Immobilizer * Underrun protection: rear * Autonomous Emergency Braking System (AEBS) Interior * Seats, fabric * Multifunction steering wheel * On-board computer * Load compartment floor, wood * Floor covering, rubber Comfort * Air conditioning * Comfort seat, driver * Driver's seat, height adjustable * Passenger bench seat, 4 persons * Power steering * Adjustable steering column * Lumbar support, driver * Electric windows * Central locking with remote control * Cup holders * Driving profile selection Load Compartment * Length 2,800 mm, width 2,070 mm, height 400 mm * Volume 2 m³ Other Dimensions and Weights * Permissible total weight: 3,500 kg * Gross vehicle weight: 7,000 kg * Wheelbase: 3,450 mm ----- New vehicle registration / Promotional price - Errors and changes excepted - While supplies last - Subject to prior sale - Custom canvas and frame structures possible, please contact us for details. - Financing / hire purchase / leasing available on request with top conditions - Extended warranty / maintenance contract available for an additional charge. - Delivery possible for an additional charge - Your contact persons: - Mr. Axel Scheske, Tel. - Mr. Luca Netter, Tel.

Condition: used, mileage: 490 km, power: 100 kW (135.96 HP), first registration: 06/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space volume: 2 m³, loading space length: 2,800 mm, loading space width: 2,070 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Model Year * Model Year: 2024 Transmission * Manual transmission, 6 gears Driver Assistance Systems * Automatic headlight control * Lane keeping assistant * Rear view camera * Driver attention assistant * Traffic sign recognition Lights and Visibility * Headlight range adjustment * Rain sensor * Tinted glass * Daytime running lights * Light sensor Audio & Communication * Radio * Digital radio reception DAB * USB connection * Hands-free Bluetooth * Android Auto and Apple CarPlay Exterior * Leaf spring suspension * Trailer coupling, ball: d50mm * Electrically adjustable and heated exterior mirrors * All-season tires * Tire repair kit * 1x13-pin connector * Speed limiter: 160 km/h * Touchscreen operation * Folding side panels Safety * Driver / passenger airbag * Electronic Stability Program ESP * Anti-slip regulation ASR * Anti-lock braking system ABS * Tire pressure monitoring * Immobilizer * Underrun protection: rear * Autonomous Emergency Braking System (AEBS) Interior * Seats, fabric * Multifunction steering wheel * On-board computer * Load compartment floor, wood * Floor covering, rubber Dkjdpfxj Ah U U So Acyow Comfort * Air conditioning * Driver's comfort seat * Driver's seat, height adjustable * Passenger bench, 4 persons * Power steering * Adjustable steering column * Lumbar support, driver * Power windows * Central locking with remote control * Cup holders * Driving profile selection Load Compartment * Length 2,800 mm, width 2,070 mm, height 400 mm * Volume 2 m³ Other Dimensions and Weights * Permissible total weight: 3,500 kg * Gross vehicle weight: 7,000 kg * Wheelbase: 3,450 mm ----- New vehicle registration / promotional price - Errors and changes excepted - While supplies last - Subject to prior sale - Custom tarpaulin and side rail superstructures possible, please contact us with any questions. - Financing / hire purchase / leasing available on request at attractive conditions - Maintenance contract / service contract available for an additional charge. - Delivery possible for an additional charge - Your contact persons: Mr. Axel Scheske, Tel. Mr. Luca Netter, Tel.

Condition: used, functionality: unexamined, 1 x Benier conical rounding machine with outfeed conveyor. This is used in commercial and artisanal bakeries to shape and roll raw dough pieces into smooth, uniform balls after portioning. Model - CO5. Serial/Order number - 2.0365 Electrical rating - 415 V / 50 hz / 3 phase. Dkedpe Ahurmofx Acyjw Rated power - 2.1 Amps. Condition - Needs basic control box, was running from mains electrical control panel.

Condition: used, This listing is for a stack of 3 x Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator The units are in full working condition and is ready for immediate use Also available as individual units Djdpeyv Ik Nofx Acyjkw The MaxQ 8000 provides high-capacity orbital shaking with integrated temperature control. This unit is direct-from-lab surplus in original condition, ideal for growing cultures and general mixing applications while saving valuable floor space. Viewing is possible in Duxford by appointment Professional Asset Overview The Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator was acquired after decontamination as a surplus asset directly from a high-tier research facility. This unit is sold in its Original Lab State. We specialize in Direct Reuse, meaning we do not tamper with, refurbish, or alter the internal components of the machine. You receive the instrument exactly as it was decommissioned from the active research bench. Transparency Report and Technical Audit: • Source Pedigree: Tier-1 Biotech • Condition: Direct-from-Bench Original • Power-On Test: Verified • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. • Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory..

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,000 kg, total height: 2,730 mm, total width: 1,470 mm, total length: 2,000 mm, overall weight: 2,100 kg, table width: 880 mm, table length: 1,720 mm, table load: 1,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, Manufacturer: Mitutoyo, Model: Crysta-Apex V7106 CNC CMM, First commissioning: 2022, Regularly serviced by Mitutoyo according to maintenance schedule, last service in 2025. Measuring range (x/y/z): 700 / 1,000 / 600 mm, Measuring table made of granite; Dimensions of measuring table: 880 x 1,720 mm Maximum workpiece height: 800 mm Maximum workpiece weight: 1,000 kg Automatic, swiveling measuring head PH10MQME Plus (CM) SCR 200; Equipment/Accessories: Measuring head TP 200 PI-200-3 interface for TP 200 measuring probe Joystick box M2 Dkedpfxj Ah Rtfj Acyow Calibration sphere, ceramic PH10MQP R2 system Software: Mitutoyo MCOSMOS-1 CNC V4 Interface: Mitutoyo Q-DAS OUTPUT for transferring measurement data to the Q-DAS quality management and statistics system, Dell PC tower and LCD monitor, Weight of main unit: approx. 2,100 kg.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, total height: 3,000 mm, total width: 2,330 mm, table load: 250 kg, overall weight: 9,200 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 20,000 W, tool weight: 8,000 g, product length (max.): 2,880 mm, number of axes: 5, This 5-axis EMCO MAXXMILL 500 was manufactured in 2016. It features a maximum spindle speed of 15,000 rpm and a tool magazine capacity of 40 tools, allowing for efficient machining operations. The machine includes a swivelling-rotary table with a clamping area of 600 x 600 mm and a maximum workpiece size for 5-side machining of 500 x 500 x 475 mm. If you are looking to get high-quality milling capabilities, consider the EMCO MAXXMILL 500 vertical machining centre. Contact us for further details. • B-axis (tilting): ±100° • C-axis rotation: 0–360° continuous • Rapid traverse X/Y/Z: 30 m/min • Max rotational speed B/C axes: 25 rpm / 25 rpm • Spindle nose to table distance: 150–650 mm • Max acceleration X/Y/Z: 3 m/s²Main spindle • Max torque: 100 NmWorking table • Type: Swivelling-rotary table • Clamping area: 600 × 600 mm • Max workpiece size for 5-side machining: 500 × 500 × 475 mm • T-slots: 5 • T-slot spacing: 100 mm • Table-to-floor distance: 776 mmTool changer • Magazine type/capacity: Drum magazine, 40 tools • Tool change system: Double-gripper arm • Tool-to-tool time: 2 s • Max tool diameter: 80 mm (125 mm without adjacent tools) • Max tool length: 250 mm • Max total magazine load: 100 kg • Tool management: RandomAccuracy (manufacturer nominal) • Positioning accuracy X/Y/Z: 8 µm • Repeatability X/Y/Z: 3 µm • B-axis positioning accuracy: ±20 arcsec • C-axis positioning accuracy: ±10 arcsecCoolant system Djdpj Ah H Nqefx Acyjkw • Tank capacity: 250 L • Standard pump pressure: 2 bar • Max flow at 2 bar: 40 L/minCondition, refurbishment, and status • Comprehensive refurbishment by specialist: • Complete refurbishment and installation/adjustment of swivelling-rotary table • Extensive cleaning and reconditioning • Installation and setup of workpiece and tool measurement probes • Automatic kinematic calibration (KINEMATIC AUTO) • Brand-new main spindle installed • Machine connected to power and operational • Milling test possible Additional equipment • Automatic workpiece probe • Laser tool measurement system • Through-spindle coolant system, 20 bar • Chip conveyor (chip discharge height: 1,100 mm) • Linear scales on X, Y, Z • Automatic machine door • Automatic kinematic system (KINEMATIC AUTO) • Oil supply for machining fixtures via rotary joint at table centre • Spare spindle available (inclusion in sale to be confirmed) Technical Specification Taper Size ISO 40

Condition: new, *IMMEDIATELY AVAILABLE* Dsdpfx Acj Aicugoyekw Includes: badge_wc, badge_4seats Equipment: - 1x toilet - Electric heating - Refrigerator Net price: €10,210.08 / Gross price: €12,150.00 Article number: VMO113312121.02 Technical data: • Brand: Vezeko • Model: MOBI 3201 • Vehicle type: Crew van • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (LxWxH): 313 x 217 x 212 cm • Exterior dimensions (LxWxH): 473 x 232 x 293 cm • Loading height of the floor: 73 cm • Permissible total weight: 1,350 kg • Unladen weight: 1,340 kg • Payload: 320 kg • Chassis: Highloader (wheels under the body) • Tires: 165R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Insulated thermo-sandwich body with 50 mm wall thickness. Outer layers of the body made of hot-dip galvanized and additionally powder-coated steel sheet. • Sandwich roof with GRP coating, 50 mm thick. • Insulated floor, 60 mm thick. • High-quality PVC flooring in grey. • Completely galvanized steel frame. • Overrun device and axles from ALKO. • 4 stable crank supports for safe and quick setup. • Automatic support wheel. • Tow hitch with run-up protection. • Electrical connection CEE 230V (blue plug) including cable. • Clearance lights. • 2 maneuvering handles at the front. • Rear frame and edge profiles made of special aluminum profiles. • Additional reinforced automatic support wheel. • Reverse automatic function. • 13-pin plug. • Rear lights. • Large-sized safety lighting. • Integrated rear fog light. • _____ Interior equipment: • Lockable entrance door on the right-hand side when facing the direction of travel. • Galvanized ladder for hanging with 2 steps (can be easily hung on the inside of the entrance door during travel). • Table. • 4 chairs. • Robust PVC flooring. • Shelf for A4 folders above the window. • Coat hooks. • Refrigerator with freezer compartment. • Coffee machine. • Electric heating. • Window with safety outer cover (900x900 mm). • Fuse box. • Interior lighting. • Pinboard 600x400 mm. • Various free 230V sockets. • _____ Toilet compartment equipment: • Lockable entrance door at the front in the end wall. • Galvanized ladder for hanging with 2 steps (can be easily hung on the inside of the entrance door during travel). • Toilet with tank. • Washbasin with fresh water tank and foot pedal. • Mirror above the washbasin. • Tank ventilation prevents odor formation. • Toilet paper holder. • Electric heating. • Mirror above the washbasin. • Interior lighting. • 2-inch ball valve as a drain valve under the floor. _____ Accessories can be retrofitted by our specialist workshop! - Feel free to ask about any specific requests! _____ - Financing or leasing possible. - Nationwide delivery possible. - All prices include VAT. - Vehicle registration document can be sent in advance, or transit license plates (Germany) can be provided. - Export license plates including customs registration possible. Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: excellent (used), Year of construction: 2019, KEYSIGHT TECHNOLOGIES Scienlab Battery Test System Keysight SL1000A 1000 V / 900 A / 360 kW – water-cooled Used bidirectional battery test system for testing high-voltage batteries and energy storage devices with controlled charge/discharge cycles and electrical measurement data acquisition. Technical data: Manufacturer: Keysight Technologies / Scienlab Model: SL1000A; 1 channel Declaration of Conformity: 03/27/2019 Acceptance/Calibration documents: 04/16/2019 Electrical output data: Output voltage: 50–1000 V DC Output current: ±900 A DC continuously Output power: max. ±360 kW/channel Current rise time: under 2 ms (typically 1.6 ms) Mains connection: 400 V AC / 50 Hz; 3 (N), PE Rated current: 2 × 290 A Fuses: 2 × 315 A gG Efficiency: over 90%; cos φ over 0.98 Power loss: under 36 kW Measurement data acquisition: Voltage: 4-wire; ±0.05% of measured value ±300 mV offset Current: ±0.05% of measured value ±180 mA offset Current ripple: ±0.2% up to 3.6 Aeff. Temperature: 3 × PT100, 4-wire, -50 to +130 °C; ±1 K Measurement and communication data: 8 analog inputs, 0–20 mA, 32 bit Sampling rate: max. 20 kS/s CAN: 500 kBaud; MCM: Ethernet Optional: BMS-CAN, climate chamber Ethernet Cooling water supply: Water-cooled; heat to be dissipated: 36 kW Supply: 6–20 °C; return: max. 30 °C Flow rate at full load: approx. 2 m³/h Supply pressure: max. 6 bar Pressure difference: over 1.5 to 3.0 bar Connections: 1 inch male thread; condensate: 3/4 inch male thread Dimensions and operating conditions: External dimensions (W × D × H): approx. 3820 × 880 × 2500 mm Weight: approx. 2900 kg Protection class: IP54; protection class I Environment: +5 to +40 °C; 30–75 % rel. humidity Operating altitude: max. 2000 m above sea level Equipment: Dkjdpfx Ace Ah Spljyjw Modular power modules, resonant converter, internal cooling water circuit, cooling unit, DC output, output and mains circuit breakers/chokes, EMC filter, measurement/control unit, insulation monitoring, overvoltage protection, main switch, emergency stop, key switch for test release, signal light. Applications: HV battery testing, battery development, energy storage testing, charge/discharge testing, test benches, research and automotive industry. Documentation: Manufacturer's operating manual, declaration of conformity, acceptance and calibration records from 2019; further documents as shown in the images. No statement regarding current calibration. Condition: Used; optical condition as shown in the images. Scope of supply: 1 × Keysight SL1000A Scienlab Battery Test System; documentation and accessories as shown in the images. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by phone.

Condition: used, functionality: fully functional, Machine data • Gantry-type machine with stationary table and moving bridge for minimal footprint • Base, bridge, and bridge columns made of steel, welded in one piece, stress-relieved and machined • Main structural components consist of ribbed welded assemblies, optimized for the best possible rigidity-to-weight ratio, vibration damping, and high acceleration • Every machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table enables simple loading and unloading with a forklift or overhead crane • Precision ground linear guides with high preload and additional cover strip on all axes for optimal chip protection • Brushless digital A/C servo motors and controllers on all axes • Single-sided (centered) drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screw spindle with double bearing support on Z-axis • Precision planetary gearboxes with minimal backlash Dedpfsybb N Ijx Acyjkw • Fully enclosed cable drag chains to protect cables from chips and dust • High-quality shielded cable drag chain wiring for maximum reliability against interference and downtime • X-axis machining area: 1,540 mm • Y-axis machining area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 240 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM control system • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with manual tool change • Power consumption: 5.6 kW • 5,000 to 24,000 RPM, infinitely programmable • Cooling via integrated electric blower Dust extraction for manual tool change • Hose connection diameter: 120 mm Work table • T-slot profiles Safety features • CE compliant according to DIN EN 13849 • Includes EMC filter, Emergency Stop • Light curtain system controlled by the machine controller

Condition: used, functionality: fully functional, For gluing stair treads - Hydraulic adjustment of the angled beam - Hydraulic cylinder with lateral ball bearing, adjustable, stroke 120 mm Dksdpfjygwp Uox Acyew - Total and individual cylinder control Included in delivery: Press complete with all accessories: 4 hydraulic cylinders with 120 mm stroke, 1.8 t per cylinder, 3 cylinders can be switched off individually, 1 cylinder for adjusting the pressure beam, control panel for two operations, pressure gauge and pressure regulator, hydraulic unit, oil tank and hoses, - 220/380 Volt, - Pressing width 1800 mm - Pressing height 750 mm - Pressure beam support 80 mm - Weight approx. 500 kg Transport available at extra cost!

Condition: used, This listing is for PHCbi IncuSafe CO2 Incubator MCO-170AIC-PE. The unit is in full working condition and ready for immediate use. Featuring a 165-litre capacity, PID control, an infrared CO2 sensor, and a copper-enriched stainless steel interior, it provides premium contamination control and precise cell culture conditions. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Dksdpfj Aihzlex Acysw By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Dsdpfxjy Naq Uj Acyskw Belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt 1, unit 1: Calibrating roller, grooved rubber design Unit 1: Rubber, grooved Belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Hand-operated control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanic Table display: mechanical digital display Working height or feed table height: 900 mm Storage location: Nattheim