Used Cable Slitting Machine for sale (94,137)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, plate thickness: 60 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Dsdpfxoxf Ewvs Ac Hscn Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1703, The SEAC FPM-400 combines the SEAC FPM-200 and SEAC FPM-350! The machine has been upgraded with additional equipment (see equipment)! TECHNICAL DETAILS Productivity: 150–320 pieces per minute MACHINE DETAILS Dcodpfx Acjxd Ubzo Hon Operating hours: 672 h EQUIPMENT Spare parts Belt system converted from timing belt to V-belt Pump for water pressurization Comb installed at the fish fillet outlet

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, working stroke: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Dcedpfxexbfwzs Ac Hsn Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Dcsdpfx Ajxlctzoc Hsn Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm MACHINE DETAILS Control: Fanuc 16T Djdpfx Aoxlix Dsc Hscn

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable Dcodpfxexg Ix Sj Ac Hon - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! Djdpfx Acexgg Iro Hocn TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, net weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roll material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum print speed: 64.2 m²/h (in express mode) Dcjdpfjxdiyfox Ac Hsn MACHINE DETAILS Dimensions & Weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The machine heads must be replaced. The seller can offer full service in this regard. The machine will be available from 02.12.2025!

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. Dodpfjwm Nq Esx Ac Hecn • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Year of construction: 2011, operating hours: 3,700 h, condition: ready for operation (used), General Data Measurements width 2515 mm Measurements depth 5461 mm Measurements height 2286 mm Machine weight 9200 kg Dedpfjxlva Uox Ac Hecn Control Unit Brand FANUC Model 0i-TD Main Drive Spindle speed range 2000 Spindle bore 137 mm Number of axis 2 Tools Number of station 12 This DOOSAN PUMA 400MB horizontal turning machine was manufactured in 2011. It features a max turning diameter of 21.7", length of 38.5", and a spindle speed up to 2,000 RPM. Equipped with Fanuc Oi-TD CNC control, live tooling, and a high-pressure coolant system. Consider the opportunity to buy this DOOSAN PUMA 400MB horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Electrical Data Connection: 380 V / 50 Hz Rated power: 10 kVA Fuse rating: 25 A Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC Dcodjxliwyspfx Ac Hon EQUIPMENT Coolant tank

Condition: good (used), Year of construction: 2006, Ref:10979 . 2006 Heidelberg Stahl TH82/64K-RFH 16pp High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SBP.D presser/stacker delivery unit. Including compressor, tools, spares & manuals. Accessories: Dcedpfswxw Snex Ac Hon Electronic gate-fold plate with control unit (to be confirmed). VFZ mobile electronic ‘Z’ knife 32 page fold unit. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 56cm with 4 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Dcodpfxjvz A Ris Ac Hjn Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 50300315, product height (max.): 15 mm, product width (max.): 305 mm, product length (max.): 210 mm, paper weight (min.): 50 g/m², paper weight (max.): 200 g/m², TECHNICAL DETAILS Dsdpfxjxdii Hj Ac Hocn Insert Length: min. 100 mm – max. 210 mm Width: min. 150 mm – max. 305 mm Weight: min. 50 g/m² – max. 200 g/m² Product height: max. 15 mm Envelope Length: min. 105 mm – max. 230 mm Width: min. 162 mm – max. 341 mm Flap width: min. 25 mm – max. 70 mm Speed: max. 15,000 envelopes/h MACHINE DETAILS Printed labels: 798,538 pcs Note: The machine will be available from 02.12.2025!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 2,420 mm, total width: 1,090 mm, total height: 1,800 mm, overall weight: 1,035 kg, input voltage: 400 V, type of input current: AC, power: 4.5 kW (6.12 HP), year of last overhaul: 2023, frequency: 50 Hz, discharge height: 975 mm, nominal voltage: 400 V, Machine in good working order, with additional linker unit Dodpfx Aoxftrzsc Hjcn

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 Dcedpfx Acjv Er Nie Hon In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Photos Available on your email or Mobile Phone WhatsApp.

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Diameter of rolling spindles: 69.85mm Max thread die diameter:210mm Dcodpfx Acjxl Ebhj Hen Variable spindle speeds: 20 -90 rpm

Condition: excellent (used), Year of construction: 2017, operating hours: 6,000 h, Ref: 11015 . 2017 Heidelberg Stahl BUH 56/44-FP Excellent condition - ONLY 6,000 hours worked! B2 size buckle folder, 8pp+ with auto setting. Equipped with: Flat pile feeder with Tremat suction head Touch screen control for auto set-up Auto setting of buckle plates & rollers 2 x buckle units with 4+4 plates Anti-noise hoods SPH-70 stream delivery with pressing. Dcjdsxlc Acspfx Ac Hjn Folding configuration: Buckle unit 56 cm with 4 plate folds, perforating/scoring shaft Buckle unit 56 cm with 4 plate folds, perforating/scoring shaft Specification: Sheet size, Max: 56 x 90 cm Min: 14 x 18 cm Fold length, Min: 4 cm Paper weight 40-250 gsm Mechanical speed, Max: 9,000 sheets/hr. Folding production, Max: 200m/min.(buckle unit) Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original machine price was approximately GBP 767,000! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thickness (Cutting) Steel: 30 mm Stainless steel: 30 mm Aluminium: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y parallel): 120 m/min Maximum simultaneous positioning speed: 170 m/min Dcjdpexlcz Esfx Ac Hen Positioning Accuracy Bilateral axis repeatability (R): 0.025 mm Mean bilateral axis positioning deviation (M): 0.05 mm Edge detection accuracy: ±0.5 mm Workpiece Weight Maximum workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Table Change Time Shuttle table changeover time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: Fiber Consumption Total power consumption (incl. exhaust, cooler): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan 2nd high-pressure cutting gas channel Prepared for N2 generator Internal dust extraction system Electrical cabinet position: top (mezzanine structure not included) Note: The machine has already been dismantled, is in storage, and is no longer connected to power.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Faccin 3HEL - 3128 3 Roll Double Pinch powered Bending Rolls Year: 2019 Model: 3HEL - 3128 Capacity: 3000mm x 15mm Top Roll Dia.: 285mm Dcodpfow R T Tkex Ac Hon Side Roll Dia.: 265mm

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 Z-Axis Movement 2033 Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets Control Unit Brand FANUC Movement X-Axis Movement 578 Z-Axis Movement 2033 Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Dcsdpfx Acjw U E Tke Hon Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Direct from catering butchers which closed recently. Commercial model with extended hopper and extended outfeed conveyor. Complete with paper interleaver and auto wipe function (needs compressed air for this function). Dodpfx Ast I E T Asc Hocn

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Dcsdpfx Acjxgq D Do Hjn Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220

Condition: used, Year of construction: 2009, Ref:10924 . 2009 Heidelberg Stahl KH82/4KL-PFH Combination Folder. High performance digital folding machine with computerised auto set-up. Comprising: • PFH82 pallet loading pile feeder designed for medium to high run lengths with low operator strain, laser guided positioning of the stack, double wheel suction head for wide format sheets. Max. pile height 1.2 metres. • Sheet ejection facility with contactless double sheet detection for continuous high- speed running and instant problem detection to minimise paper wastage. • Digital microprocessor control with touch screen display for automatic setting of fold plates & rollers. • DAC total & batch counter with memory • BUH-82 Buckle station • CAH-82 Cross-fold station Dcedpfx Ajvzyzrsc Hjn • Single sound hood covering buckle unit and knives • (2000) SBP66 Presser-stacker delivery unit. Including compressor, tools, spares & manuals. Folding sequence: 4 Parallel plates in the first unit with pre & post slit/score shafts 1st knife at 90° with slitter shaft 2nd knife to the left of first knife. Specification: Sheet size, Max : 82 x 120 cm Min : 14 x 18 cm Fold length, Min : 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Stahl VFZ 52 Knife folding unit. Mobile electronic 32pp knife fold unit. Additional Price: EUR 9,000 LOT.

Condition: excellent (used), Heavy duty cheese dicing machine, has auto load and discharge conveyors. It was bought new in 2017 and hardly used. Photos show machine without the conveyor belts fitted. These will be replaced with new ones Dsdsqgfb Dspfx Ac Hscn