Used C Gestell Presse for sale (22,952)

Condition: excellent (used), CTS Type: TS-70/350-10 CTS Temperature Test Chamber TS-70/350-10, water-cooled Temperature Testing: Temperature range: –70 °C to +180 °C Temperature deviation (over time): ≤ ±0.3 K Temperature change rate (according to IEC 60068-3-5): Heating: 10 K/min Cooling: 10 K/min Heat dissipation: approx. 5000 W at +20 °C approx. 5000 W at 0 °C approx. 3200 W at –40 °C Conditions for the specified values: Ambient temperature: +25 °C Rated voltage: 400 V Without test specimen No external heat source Without additional equipment Dimensions/Volume: Test chamber volume: 350 liters Internal dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Gujdpfxow U A Rts Aacsh Rated power: 16.6 kW, Rated current: 25.7 A Refrigerant: R404A / R23 Weight: approx. 750 kg Important information for you as the buyer! The following points are carried out on our chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to technical changes and errors; information is subject to confirmation!) For further questions, please feel free to contact us by phone.

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Temperature controller: analog, 0 to 35 °C Guedpfx Ajw Ucz Sjacsh -Adjustment: with key, see photos -Voltage: up to 380 volts -Switching capacity: 30W / 50VA -Transport dimensions: 330/300/H150 mm -Weight: 1.5 kg

Condition: good (used), Cooking kettle Capacity 300 litres Stainless steel Power 18 KW Dimensions approx: 1050 mm x 1260 mm Guedpfepwnftjx Aacoh

Year of construction: 1969, condition: good (used), Pneumatic gluing press, pressure max. 10 bar, gluing bar with heating, gluing surface 550 x 40 mm stepless temperature adjustment for the lower and upper gluing bar from 0 - 300 degrees C, stepless adjustment of the gluing time, Guodpfx Asd Dxqbjacoh drive power: 5 Kw, 380 Volt-50 Hz, two-hand operation SIEMENS. Pressure build-up via articulated lever, max. opening travel approx.30 mm

Condition: good (used), mileage: 299,126 km, power: 184 kW (250.17 HP), first registration: 01/2016, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 245/70R17.5, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,470 mm, loading space length: 6,250 mm, loading space height: 2,300 mm, Year of construction: 2016, Equipment: tail-lift, Renault D12.250 4x2 - Box Body - Tail Lift 1,500 kg - A/C - Euro 6 - Automatic - Camera System MY: 04-01-2016 KM: 299,126 Chassis No.: VF640J569FB001416 Box dimensions: 625 x 247 x 230 cm Tail lift: 1,500 kg Air conditioning Euro 6 Automatic transmission Camera system = Further Information = AdBlue system: Yes Tire size: 245/70R17.5 Front axle: Max. axle load: 4,480 kg; Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf spring Rear axle: Twin wheels; Max. axle load: 8,480 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Suspension: air suspension gross vehicle weight: 12,000 kg tailgate: rear liftgate, 1,500 kg Technical condition: good Gjdpfx Aaowq Nuroceuh Visual condition: good Contact VAEX The Truck Traders for more information.

Condition: ready for operation (used), MPM 3.AB230SM3.C/G.E/ SN:3.602.18.3707, used, normal signs of wear, 100% functional, scope of delivery as per photos Godpfx Aaoi I I A Iscsuh

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) Gedpfx Aaew U Awmjcsuh - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: used, Year of construction: 1998, measuring range X-axis 330 mm measuring range Y-axis 400 mm weight of the machine ca. 0,250 t dimensions of the machine ca. 0,88 x 0,52 x 0,99 m Tool presetter - year of manufacture 1998 Workshop PC - year of manufacture 2008 Label printer - year of manufacture 1999 --> Measuring axes 2 precision guides on both axes in a recirculating ball bearing system with maximum load capacity, each with 2 recirculating ball bearings per guideway, preventthe measuring slides from yawing and pitching. --> Optoelectronic measuring systems Heidenhain LS, centred in both measuring axes for position determination in the centre of the measuring slides. --> Tool holders Hardened SK 50 tool spindle with taper in gauge quality, mounted in precision roller bearings for maximum concentricity and reproducibility. --> Rotation of the tool spindle can be pneumatically clamped at the touch of a button, Positioning 4x 90° for stationary tools via pneumatic index bolts. --> Scanning of cutting edges High-quality profile projector with 150 mm matt disc diameter and 20- x magnification for non-contact measurement and reliable reading of the cutting position in the projector. --> Rotatable and fixed crosshairs for checking the radius and angle of the tool cutting edge. - functional - not in need of repair Gujdsw Ap Rqepfx Aacjh incl. measuring computer, label printer, screen and keyboard

Condition: good (used), Year of construction: 2001, functionality: fully functional, - Manufacturer: SPS - Model: Vitessa Multistar G2/C - Machine type: Screen printing machine (complete system) - Year of manufacture: 2001 - Equipment: • SPS feeder unit • SPS dryer, model TS-M2, year 2001 Gjdpjxby S Hefx Aacouh • SPS stacking/declaration unit, model Autostack ASR 61+G2, year 2001 • Steel platform and chequer plate on pallets • Control cabinets - Fields of application: industrial screen printing, packaging, labels, special print jobs

Condition: used, mileage: 129,050 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 5,000 kg, first registration: 12/2019, loading space length: 3,300 mm, loading space width: 1,850 mm, loading space height: 1,950 mm, emission class: euro6, color: white, number of seats: 3, total length: 6,246 mm, total width: 2,135 mm, total height: 2,448 mm, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 9378 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles available immediately. Largest selection – Best price. More than 1,000 satisfied customers per year – Top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----1st owner, German vehicle, non-smoking vehicle Full service history exclusively at Mercedes Benz Body: Deep-freeze box body Navigation system Heated seats Body: Refrigerated box body Thermo King refrigeration unit V500 MAX Refrigerant R-404A/ R-452A Standby cooling + engine-driven cooling According to the manufacturer (Thermo King), under optimal conditions the cooling unit can reach temperatures as low as -20°C. Achieving this depends heavily on usage and circumstances and is not guaranteed (loading area size, insulation, frequency of door opening, ambient temperature, etc.). Rear swing doors Side door Rear entry aid ---- Special features: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 13-pin trailer socket * Chassis: Stabilization level II * Terminal strip for electrical connections (under driver's seat) * Fuel filter with water separator * Front engine PTO with bracket for additional refrigerant compressor Gujdpjw Dlzusfx Aacoh * Navigation system for MBUX multimedia system * Cabin seats: double passenger seat * Cabin seats: heated driver's seat * Fleece battery 92 Ah * Reinforced front axle Standard equipment: Overhead storage compartment, under-dash storage compartment (passenger side), rear towing eye, adaptive brake light, driver's airbag, anti-lock braking system (ABS), traction control system (ASR), rear-wheel drive, washer fluid level indicator, electrically adjustable and heated mirrors, both sides, outside temperature display, roof lining in cab, automatic headlight activation, electronic brake force distribution (EBV), electronic stability program (ESP), Driver Assistance System: Active Brake Assist, Driver Assistance System: Crosswind Assist, Driver Assistance System: Lane Keeping Assist, digital tachograph, downloadable, electric windows (front, both sides), 6-speed transmission - TSG (Eco Gear), Body/Chassis: flatbed, Keyless-Start, Communication module (LTE) for digital services, Fuel tank: main tank 71 liters, Steering wheel (mechanically adjustable steering column), headlight range control, truck registration, side marker lights, Mercedes-Benz emergency call system, Engine 2.1 L – 120 kW CDI KAT, particulate filter, wheelbase 3665 mm, low emissions according to Euro 6, seat belt warning system (driver’s side), seat upholstery: fabric, cab seats: driver's seat with armrest, cab seats: driver's seat adjustable, daytime running lights, rear underrun protection, service interval indicator Assyst, immobilizer, heat-insulating glazing (front windshield with top band filter), central locking with remote control, permissible gross weight 5.00 t. ----Fresh main inspection / emissions test on request. ----Warranty & "TÜV Profi Check" naturally available from us! We are happy to take your vehicle in trade! We can also provide you with a customized financing or leasing offer! No down payment, can be paid off at any time and with special early repayment options. Let our sales team know your requirements; we are happy to advise you. ----Arrange a test drive and experience the quality y

Condition: good (used), Industrial oven, drying oven Type: PKL-1 Maximum temperature: 180 ° C The temperature is adjustable Number of tablets: 10 Size of Table: 70x50 cm Individually lockable electrical latch Oven dimensions: Gjdpfx Aasd Tiu Ijceuh Height: 1450/1900 mm Width: 1250 mm Depth: 850 mm Weight: 350 kg We have 3 pieces on Stock!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: YVX160TCO4876A, workpiece weight (max.): 8,000 kg, spindle motor power: 45,000 W, total length: 5,500 mm, total height: 5,400 mm, total width: 5,500 mm, type of input current: AC, input voltage: 380 V, workpiece diameter (max.): 2,000 mm, overall weight: 25,000 kg, workpiece height (max.): 1,200 mm, nominal power (apparent): 65 kVA, number of spindles: 2, rotary table diameter: 1,600 mm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The YV-1600-ATC+C vertical turning centre is a large, high precision and heavy duty machine. The rigid vertical column and base are meehanite castings, heavily ribbed for reduced thermal distortion and vibration damping. It is built for heavy duty turning of large size workpieces. The machine has live spindle and 16 tools ATC. Machine can be dismounted and loaded on truck by use of overhead crane. Gedpfxoxl Avcs Aacouh

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A) Gsdpow S E N Tjfx Aaceuh

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, Year of construction: 2024, operating hours: 1,231 h, Equipment: air conditioning, General information Year of manufacture: 2024 Technical information Number of cylinders: 4 Engine capacity: 2.400 cc Steering: skid steer Make of engine: Bobcat Empty weight: 4.898 kg Dimensions (LxBxH): 390 x 186 x 206 cm Functional Quick coupler system: Yes CE mark: yes Gedpfxew U Itae Aacsuh Condition Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: USA Condition CE type: CE bucket, Hydraulic Power Bobtach, 2-speed drive, Rear camera, High-flow hydraulics, Large display, Air-suspended seat

Condition: used, mileage: 228,016 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,920 mm, first registration: 11/2019, fuel tank capacity: 65 l, emission class: euro6, color: white, number of seats: 3, number of previous owners: 3, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, General information Number of doors: 5 Model range: Jun 2018 - Jun 2020 Cab: single Technical information Torque: 330 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Transmission: 9 gears, Automatic Measures length/height: L2H2 Dimensions (LxBxH): 593 x 202 x 291 cm Weights Empty weight: 2.122 kg Carrying capacity: 1.378 kg GVW: 3.500 kg Interior Interior: black Environment CO2 emission: 251 g/km Gujdpfxswvkzks Aacjh Consumption Average fuel consumption: 8,1 l/100km (35 MPG) Urban fuel consumption: 8,2 l/100km (34 MPG) Extra urban fuel consumption: 8,1 l/100km (35 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 11/2025 Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options

Condition: used, overall weight: 32,000 kg, maximum load weight: 25,850 kg, axle configuration: 2 axles, loading space length: 7,330 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 25 m³, first registration: 05/2001, Year of construction: 2001, total width: 2,550 mm, total height: 3,100 mm, Equipment: ABS, 2-axle Carnehl steel tipper body VIN: PC09163 Chassis / Attachments: * Air suspension * Landing legs * Tyres: 385/65 R 22.5 * Remaining tread: approx. 30% * 2 x SAF axles with disc brakes * Foldable underrun protection Body: * Steel tipper body / steel chassis * Volume: approx. 25 m³ * Load pressure gauge * Front-mounted hydraulic ram (Georg), max 250 bar * Rear chute 400 mm * Rear tailgate as pendulum gate, hydraulically opening upwards * Rear tailgate with 2 mechanical hook locks Weights: * Gross weight: 32,000 kg * Payload: 25,850 kg * Unladen weight: 6,150 kg Other: * German registration New main inspections / safety checks or changes to weight rating (downrating/uprating) are available upon request. We are also happy to assist you in obtaining export/transit license plates, and can arrange transport of your purchased vehicles within Germany. Please contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing or typing errors, changes, prior sale and mistakes reserved! Guedpfx Aasxc Affsceh ---- Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. Thanks to our many years of experience in reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the supply of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our clients an excellent, all-inclusive service package and provide them with a competent contact to support them in buying or selling vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organization of special transports We are happy to assist you with the organization of special transports. Temporary/export plates We are happy to help you obtain export/temporary license plates. Handling customs formalities We are happy to assist you in handling customs formalities.

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Gusdeg R Sh Ajpfx Aacjh Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, mileage: 865,048 km, power: 231 kW (314.07 HP), first registration: 12/2010, number of seats: 38, gearing type: automatic, next inspection (TÜV): 03/2026, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Green environmental sticker, Euro V EEV engine, VOITH transmission type, ABS, ASR, kneeling function, retarder, digital tachograph, air conditioning, Webasto auxiliary heating, loudspeakers, microphone, front air-operated doors and wide middle door, standing places: 47, number of seats: 33 + 1, foldable seats 4x, 1x space for stroller, 1x wheelchair space, grab rail, 2x sliding windows per side, single glazing, wheelchair access ramp, matrix display, 2x roof hatches, electrically adjustable exterior mirrors. Vehicle may be equipped with advertising decals and/or lettering. Gujdpfjw Sb Ulox Aacsh Our offer is generally without new TÜV certification. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be equipped with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We will gladly prepare a financing or leasing offer for this vehicle. Please contact us!

Condition: good (used), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Temperature Test Data: Temperature range: -70°C to 180°C Temporal temperature deviation at center of workspace: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Climate Test Data: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at center of workspace: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at center of workspace: ±1 to ±3% RH Maximum heat compensation: 8000 W Enclosure dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. These allow for test leads and testing devices to be routed into the chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Gjdpfx Aswvgwbsaceuh Test chamber illumination: Halogen bulb 24V, 50W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 44.0 kW Rated current: 63.0 A Customer-provided fuse: 100 A slow-blow Maximum heat output to the environment: 2.2 kW Permissible test item weight: Total load on shelf supports: 100 kg Test chamber floor: 150 kg, Removable shelf: 50 kg Refrigerants: R 404A/R 23 Weight: 1900 kg For your security as a buyer, please note: The following steps are carried out in advance on our chambers offered for sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Condition: new, functionality: fully functional, Year of construction: 2022, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,050 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 5,104 kg, drive type: Elektro, construction width: 1,265 mm, Electric 4-wheel forklift Load centre: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Gujdot Ddzdspfx Aacsh Condition: New machine Technical condition: New Front tyres type: Non-marking Front tyres size: 28x9-15 Front tyres condition: 80 - 100% Rear tyres type: Non-marking Rear tyres size: 18x7-8 Rear tyres condition: 80 - 100% Battery voltage: 80V Battery capacity: 500Ah Battery manufacturer: GBD Battery type: PzS Battery year of manufacture: 2025 Battery condition: New Description: Overhead guard with front windscreen, front and rear working lights, BlueSpot front and rear, 3rd and 4th valve up to fork carriage, fork positioner, rotating beacon, manual levers, side shift, fork positioner, Cascade fork positioner with side shift, opening range: IK-IK 60-735 mm, 3rd valve, 4th valve, rear working light, front working light, front windscreen, load backrest, full free lift, safety light, non-marking tyres, interior mirror, rotating beacon, windscreen wiper, LED, seat,

Condition: used, Year of construction: 1998, Brushing machine for elements brand Camam model C/1N/1S serial number 98001 year of construction 1998 branded CE powered 380V 4.5 Kw 13 A ground 530 Kg. complete with declaration of conformity and manual of installation and d. Guodpfx Aslagc Seacsh

Year of construction: 2003, condition: excellent (used), drying oven, tempering oven Caltherm 150 C For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm Gedpfx Aaovpagdjcjuh height: 200cm width: 95cm electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-150 Celsius external dimensions:

Operating hours: 630 h, condition: excellent (used), Vötsch Model: VT 7018 Air-cooled temperature test chamber Only approx. 630 operating hours (read out)! Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm External dimensions: Width 865 x Depth 1280 x Height 1780 mm Test chamber volume: approx. 190 liters Technical specifications for temperature tests: Temperature range: -70 °C to +180 °C Temperature deviation in steady state, according to IEC 60068-3-5 depending on the test chamber temperature temporal ±0.1 to ±0.5 K spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min. Thermal compensation max. 1000 W Tube port L1: DN 50 mm Tube port L2: DN 125 mm Tube port R1 R2: DN 125 mm Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Guodpfx Aaow Nqimscoh Rated power: 5.9 kW Rated current: 12 A Protection: 16 A time-lag, to be provided by customer Weight: approx. 460 kg net Refrigerants: R 404A and R 23 Important safety information for you as a buyer! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Condition: used, functionality: fully functional, We offer for sale a Heraeus T 5050 E /ct1974 in excellent condition Drying cabinet, industrial oven. Ventilated oven with 2 shelves. Nominal temperature max: 250°C volume approx. 180 liters Power: 2000W. 1 phase 50Hz Dimensions Interior 50x49x50 cm., housing: 79x56.5x65.5 cm. With Heraeus kelvitron controller - with continuous/timer function. Temperature protection DIN 12880 Protection class: IP20 Gusdpougtz Refx Aacsh

Condition: excellent (used), Weiss Model: WK3-600/70 Climate Test Chamber, Water-cooled Specifications for temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Cooling: 2.5 K/min Temperature deviation: Temporal: ±0.1 to ±0.5 K Spatial: ±0.5 to ±1.5 K Heat compensation: max. 2500 W Specifications for climate testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98% r.h. Temperature deviation (temporal): ±0.1 to ±0.3 K Temperature deviation (spatial): ±0.5 to ±1 K Humidity deviation (temporal): ±1 to ±3% r.h. Temperature uniformity (spatial): ±0.5 to ±1.0 K Heat compensation: max. 500 W Test chamber volume: 600 liters Test chamber dimensions (H x W x D): 950 mm x 800 mm x 800 mm External dimensions (H x W x D): 1998 mm x 1000 mm x 1745 mm Feedthrough diameters: NW 125 mm and NW 50 mm Operating data: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 9.1 kW Nominal current: 19.0 A Refrigerant: R 452A & R23 Weight: 680 kg Gusdpfew Nqhpjx Aacsh Important safety information for buyers! The following procedures are carried out on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If necessary, the chamber is refilled with refrigerant in compliance with applicable laws 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Specifications subject to change and possible errors!) If you have further questions, feel free to call us.