Used Button Head for sale (11,542)

Condition: excellent (used), Year of construction: 2011, Four-head welding machine URBAN, type AKS 6410/4, from left to right, maximum welding dimensions: 3,500 x 3,000 mm, WINDOWS control, weld bead limitation of 0.2 mm for colored profiles, pressure bar for sealing, designed for single-shift operation, technically overhauled and fully functional. Includes cooling table, L = 3.0 m, TBA (URBAN conveyor belt). Lodpfx Abjz Dk Nljysah

Year of construction: 1994, condition: used, functionality: fully functional, Emmegi Norma 350 TU/4 double-head saw with dust extraction system and spare blades for cutting PVC profiles. €1,000 (excluding VAT). No delivery; must be picked up at the workshop. Lsdpjza Smnefx Abyeah

Condition: good (used), Year of construction: 2006, functionality: fully functional, STENNER MHS9 MK2 HORIZONTAL RE SAW LINE. This complete 9 head line comes with 12 metre infeed and 8 metre outfeed. Tilting heads which are ideal for Feather Edge board production 915MM diameter wheels Max width blade 100MM Saw speed 35M/S Max width timber 305/450MM Max height 305MM Main motors 9x 18.5KW Variable feed speed 15-60M/MIN Operator control station Also if required we have a Systems TM rotary auto stacker which is avaliable at extra cost All nine heads have new upgraded power feed wheels with sprockets, chain tension rollers and alloy blade guides for improved faster production. All guards have new sawdust exhaust outlets for added fire protection. Comes with 80% of orginal dust extraction trunking and operator cross over steps. All additions/improvements costing over 20k GBP. Comes with blades. It does not come with the cross transfer deck shown in video Production of 1.8m long Feather Edge boards is circa 36 m3 sawn per hr. This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. Laodpfxjzwh Hws Abyjh To be collected by customer from site Northamptonshire UK. Crane lorry essential Offers in excess of £80,000 GBP

Condition: used, Trumpf HAAS Type: HAAS Laser HL556D Wavelength of laser light: 1064 nm Minimum power: 5 W Maximum regulated power: 550 W Beam parameter product: 25 mm-mrad External dimensions: Width 1250 mm, Height 1580 mm, Depth 720 mm Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pole, 63 A, 6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are connected to the connections and sealed with two hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains Ljdpfxszdrwgj Abyjah 20 V ± 10 %, 3P + PE, 50 Hz 20-01-38-00 V ± 10 %, 3P + PE, 60 Hz Scope of delivery: (Laser system, laser head, and replacement cable…) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), functionality: fully functional, 4 x Wagner ZA 16 1 x Wagner MSD 20 19 mm shank, suitable for, e.g., Revolver Traub TD or Index A 25. List of thread inserts: M 0.8: 2 sets Lsdpfxoz H H A Te Abyeah M 1.0: 7 sets M 1.25: 20 sets + 1 set on a Wagner head M 1.5: 7 sets + 2 sets on a Wagner head M 1.75: 5 sets In total, 44 sets of thread inserts. See also the photos. The heads can be inspected at our warehouse.

Condition: used, Liquid filler that fills eight packs at a time This filler doses liquid, such as brine or sauce, through eight filling heads at once into jars or tubs. The liquid comes from the large hopper on top, and the volume in millilitres is set per programme on the touchscreen. The control currently holds programmes for cucumber and for a second product ("Farmer"). Lajdpfx Abez Ndb Soyjh The menus are in Dutch and there is a separate cleaning programme. We found no rating plate on the machine, so the make and year of manufacture are unknown. It stands on castors. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Volumetric liquid filler Filling heads: 8 Dosing: Adjustable in ml per programme Controls: Festo touchscreen, Dutch menus Cleaning: Separate cleaning programme Construction: Stainless steel, hopper on top, on castors

Condition: used, POWERLOCK MOUNTED MILLING HEADS, price €7,500 Two cabinets filled with milling heads for various applications, approximately 45 pieces. Working dimensions in mm: 40 - 1 piece 60 - 12 pieces Lasdpfx Aezxguisbyeh 80 - 7 pieces 100 - 9 pieces 130 - 3 pieces 140 - 1 piece 150 - 7 pieces 170 - 3 pieces 180 - 2 pieces

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, workpiece weight (max.): 2,000 kg, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick! Lsdpfx Ajy Tni Tsbysah

Condition: used, Year of construction: 2002, amount of capping heads: 6 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW) Laedpfxjz S Rfke Abyoh cap sorting system: Vibrating container weight [kg.]: 1,5 Technical data: working direction: right-left number of heads: 6 capacity bph max.: 12000 motor height adjustment: yes speed adjusment: frequence converter

Condition: like new (used), functionality: fully functional, Various Powerlock planer heads for WEINIG Powermat. Lasdeulmb Aepfx Abyjh 1 pc - 240 mm - €500 1 pc - 150 mm - €350 4 pcs - 100 mm - €320 Price per piece

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Ljdpfs Aaw T Nsx Abyeah Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: used, Johansson Type: Johansson Cordimatic 7000 Coordinate Measuring Machine The coordinate measuring machine for measuring large workpieces. Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control, rotary/swivel probe & probe changer library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 controller Condition: used Scope of delivery: (See image) Lasdpfx Abjzd N Shsyeh (Changes and errors in technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, This listing is for the Watson Marlow 313X Extension Rapid Load Pump Head The unit is in full working condition and is ready for immediate release Key Features Watson Marlow 313X Peristaltic Pump Head The Watson Marlow 313X is a robust, single-channel peristaltic pumphead known for its precision, versatility, and ease of use. Designed for lab, diagnostic, and OEM applications, the 313X features a flip-top rapid-load mechanism, allowing quick and secure tube changes while maintaining consistent flow performance. Roller Configuration: 3-roller or 4-roller Max Flow (3-Roller): Up to 2000 mL/min Max Flow (4-Roller): Up to 1200 mL/min Max Speed: 400 rpm Compatible Tubing Sizes: 0.5 to 8.0 mm ID Wall Thickness: 1.6 mm Laedpfjxv D Injx Abyjh Max Continuous Pressure: Up to 2.0 bar (depends on tubing) Materials: Back: Glass-filled polypropylene Front: IXEF Rotor, Clamps, Mounting Plate: Glass-filled nylon Rollers: MoS₂-filled nylon Accepts 1.6 mm wall standard tubing Quick, error-free tube loading with flip-top design—automatically positions and tensions tubing Add up to five extension pump heads (depending on tubing type and size) Modular design—easily expand pumping capacity Durable construction with chemically resistant materials

Condition: used, Year of construction: 1995, amount of capping heads: 6 type of closures: 30 x 60 working direction: left-right Lasdpfjz S Rdajx Abyjh

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate Ledpfx Aorc Ik Hsbyeah -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm -Weight: 555 kg

Condition: used, 3DGENCE Type: Industry F420 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) Lodpfxezix Ayj Abyoah External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic exchange system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (See pictures) Weight: 350 kg (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have by phone.

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Ledpfx Abexhfg Neysah Includes an RS‑232 serial interface for external control via software or integration into automation systems Use Cases Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle Lsdpfx Aeyazywebysah The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Condition: used, Micro-welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO, Type ISQ-MG - Spot welding head MIYACHI PECO, Type F160S - 25 mm stroke with Heidenhain measuring system - Connection cable Mains voltage: 3 x 400 V AC Mains frequency: 50 / 60 Hz Connected power: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external ring coil Control panel: MFT1 (independent, detachable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault monitoring and process monitoring - Monitoring of current, voltage, power, energy - Test pulse for part detection - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Ljdpfx Aepy Uzyebyeah Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force activation from 1.2 to 550 N - Position measuring system Heidenhain Welding unit with 5 pneumatic cylinders and Festo Type CPX valve manifold Welding head mounted on a horizontal guide rail and movable by 20 mm via a pneumatic cylinder. 3 pneumatic cylinders for workpiece fixing are available (2 with 46 mm stroke, 1 with 20 mm stroke). Welding tip overhang 300 mm Welding tip height above floor 315 mm Dimensions of welding unit W x H x D 410 x 760 x 700 mm Weight of welding unit 75 kg Total weight 100 kg

Condition: used, including speed regulator and a foot. Without belt. 0,75     Kw Ljdsz S Rccjpfx Abyoah

Condition: used, with 5 capping heads amount of capping heads: 5 Lasdpfx Aboz N S S Teyjh capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW)

Condition: used, Year of construction: 1986, Working direction: left-right Amount of capping heads: 6 Lajdpfx Absz R Dnpjyjh

Condition: excellent (used), 1. D’Andrea Planing and Turning Tool Set Type: Testarossa TRM 125 Mount: SK 50 D’Andrea BPS 200 – Adjustment range / Ø 200–300 mm Lsdpfjz Dufwox Abyeah D’Andrea SSQC 90 – Tool/slide element D’Andrea P 04.40 – Tool holder Various extensions or turning bars Additional tool/turning head – with insertable cutting blade Complete accessory set – in a plastic case

Condition: good (used), Year of construction: 2020, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, safety light barrier, HYDRA is a high-speed, two-head digital quilting machine, equipped with a fully automatic double-feed system, designed for the furniture, mattress, and home textile industries. It performs all operations: feeding via motorized rollers, quilting, and cutting of the duvet or padding to the desired length. The double-feed system allows quilting of two rolls simultaneously, while also offering motorized width adjustment for single-feed mode, with a changeover time of just 20 seconds. This double-feed system is ideal for large-scale production of sofas and headboards, doubling the manufacturing capacity through the simultaneous quilting of two rolls. Conversely, switching to single-feed mode allows for the quilting of high-end mattresses and large-format home textile items. Lodpfx Abszx Sw Aeyoah No rework machine required: the ability to resume stitching at the exact stopping point or at the desired point. Automatic parking in case of upper or lower thread breakage. Automatic measurement of the maximum physical stitching area for cross-verification with the active pattern. Easy adaptation of quilting patterns. Motorized adjustment of the width of the side and center roller clamps. Your sofas, mattresses, headboards, and duvets will stand out for the quality of their stitches, their patterns, their durability, and your increased efficiency. Key features: High-quality Dürkopp Adler sewing head with spare parts available worldwide. Upper and lower thread trimming in 0.5 seconds. Simultaneous quilting of two different rolls for increased productivity. Single-roll feed mode available, with switching between single and double modes in seconds. Statistical production graphics: stitch length, pattern name, customer name, stitching time, number of stitches, etc. ElektroteksCare: online after-sales service. Advanced side cutters. Easy troubleshooting through error code display. Adjustable material tension in both directions. Reliable Omron control system offering maximum efficiency. Ergonomic feeding system for multiple rolls. High-durability pneumatic system with low air consumption.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting length (max.): 3,050 mm, cutting height (max.): 45 mm, type of input current: three-phase, saw blade diameter: 180 mm, rotational speed (max.): 9,000 rpm, input current: 8 A, input voltage: 400 V, milling height: 45 mm, power: 3.7 kW (5.03 HP), input frequency: 50 Hz, number of digital displays: 1, We offer this very well-maintained Langzauner edge, veneer, and panel cutting machine, model LZ 5/2E - 3050. Available in a combined saw-milling version. CE version. Longitudinal design of the tool carriage on hardened and ground guide rails, lifting and lowering of the saw and milling unit is pneumatic, as well as pneumatic saw blade adjustment, adjustment range 2mm, cable guide for the tool carriage in a plastic energy chain, guidance of the unit by compact LM linear guide units. Central control panel directly in the handling area, electronically adjustable feed speed with soft start and rapid return when the tools are lowered, dust extraction channel with connection socket 150mm, prepared for connection to a central or existing dust extraction system. Special accessories: - Parallel rack compensation in the pressure beam. Prevents tilting of the pressure beam. - Movable, front support table 200mm wide - Rear sizing table for veneer processing, size 3050 x 500 mm, with parallel guidance and pneumatic stop lock - Foldable inserts for stop depth 800mm - Digital width display. Quick and accurate setting of the stop depth. Type: LZ 5/2E - 3050 Ledpfjz Ikupsx Abysah Factory number: 2/4717 Year of manufacture: 1998 Power: 3.7 kW Rated voltage: 3 x 400V + N Rated current: A Frequency: 50 Hz If you have any questions or require further information, please do not hesitate to send us a message or call us.