Used Butt for sale (117)

Condition: used, Year of construction: 1971, roll diameter / mm throat / mm workpiece height / mm Ksdpowgi R Sofx Ag Ujdg table-size 800x750 mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Year of construction: 1982, condition: used, roll diameter / mm throat / mm workpiece height / mm table-size 600 x 600 mm weight of the machine ca. ca. 650 kg Kdedji E Ahdepfx Ag Usg Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: used, Year of construction: 2017, workpiece dia. . mm material: rust free/heat resistant steel . Kdsdpfsxzu Agex Ag Ujg welding process: 15-20 bolts /min at . mm weight of the machine ca. 120 kg

Condition: used, Year of construction: 1988, roll diameter 420 mm throat 410 mm workpiece height 295 mm cutting speed 12 - 375 m/min table surface area 600 x 600 mm saw band length 3150-3260 // 3-16 mm work height max. 1020 mm voltage 380 V total power requirement 1.1 / 1.7 kW weight of the machine ca. 620 kg dimensions of the machine ca. 1000 x 800 x 1900 mm from a maintenance workshop - good condition (!!) Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel Ksdpfxjxaa Avj Ag Ujdg - Working table tiltable +/-45° - Working table tiltable 10° - Machine base * Machinevideo : ?v=UVpE_bLGHa0

Condition: good (used), BIHLER GRM100 multislide punching and forming machine, Kdedpjpm H Haofx Ag Ueg Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Condition: like new (used), Technical data for the wide-span shelving system: Racking system: SSI Schäfer Type: WR 600 Technical data for installation: Number of rack rows: 01 pcs. Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x wide-span shelving uprights, second choice (new) Material color: sendzimir galvanized Upright profile: 60 x 31 x 1 mm Incl. cross and diagonal braces, 01x swivel castor / stop castor | 01x fixed castor Castor Ø: 100 mm (bolted framework) 2,195 mm high 1,050 mm deep 08x Wide-span shelving traverse, second choice (new) Material color: RAL 7035 light grey Box profile: 80 x 40 mm Traversentyp: ASM50-CES80|40|1.5 Version: Stepped crossbar Bracket: 5 HK (hooks) Clear width: 2,400 mm Kdsdpfx Aoqhkh Aog Ueg 04x chipboard II. Choice (new) Thickness: 22 mm Dimensions: 2,380 x 960 mm Design: all-round butt joint 16x locking pins, new Design: completely galvanized To secure the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Single-head welding machine, single-head welding machine, fighter welding machine, butt welding machine -Voltage: pneumatic -Weight: 270 kg Kdsdpfxeb A Ivme Ag Usg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, Used Emmegi PrecisionTS2 Emmegi Precision TS2 Double Miter Saw Year of 2014 Cutting length 6000mm Double miter saw with 3 controllable axes with automatically movable saw unit and electronic control of all miters from 45° (inside) to 15° (outside) with an accuracy of 280 intermediate positions per degree. Kjdpfjwaz Agsx Ag Ujdg Including profile support roller conveyor on the movable unit Additional clamping device on the roller conveyor Label printer with dispenser PRO software (overlength cutting, underlength cutting, cross-cutting, wedge cutting) SLICE software (butt cuts with variable corners and lengths up to a usable cut of 500mm) Driver for connecting external calculation programs

Condition: good (used), Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Capacity: 100-400 mm Kdsdpfob A Rkmsx Ag Ujg -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm -Weight: 22 kg

Condition: good (used), Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting Ksdpeb A Rkdjfx Ag Ujdg -Weight: 65 kg

Condition: used, Year of construction: 2002, Technical details: x-travel: 1500 mm z-travel: 1300 mm control: YASNAC XRC Steuerung total power requirement: 3,3 kVA Total weight, approx.: 3.200 kg Welding robot plant consists of: -welding rectifier MESSER, type Phoenix 500TG; MIG-MAG / TIG and E-welding up to 500A; air cooling; protection class IP 23 -Wire feed EWM, type Phoenix Drive 4 ROB WE, wire Ø 1,0 - 1,2mm, feed 0,5 - 24 m/min., protection IP 23 Kdjdpfeu R Dfkjx Ag Ujg -MIG/MAG gas shielded welding torch BINZEL for wire Ø 0,8 - 1,6mm -Robot ERCS UP6-RE00 with control YASNAC XRC control, travels Y-way=1.500mm and Z-way=1.300mm, circular movement swivel=approx. 90° right/left, swivel radius=1.000mm, turn 360°, welding gun rotate 360° with projection max/min: 1.500 / 500mm -1x control cabinet L:900 x W:900 x H:2500mm -1x control cabinet ERCS-UP6-RE00, control 4.0 XRC, L:610 x W:800 x H:900mm -1x welding table L:4.400 x W:550 x H:1.100mm, with compressed air connection 10 bar, working area LxW 1.200 x 340mm, X-way 3.250mm. furthermore: 1x straightening station DETEC manufacturing (with working table and straightening unit) 1x butt welding station with feeding table i.D. *

Condition: excellent (used), Year of construction: 2012, operating hours: 2,250 h, functionality: fully functional, machine/vehicle number: 201202058, Equipment: air conditioning, low noise, parking heater, rotational speed infinitely variable, Electric Sweeper Tennant Green Machines 500 ZE Kdjdpfx Asx N I Disg Usg ZERO EMISSION! Electric drive motor 15 kW; rear-view camera, 2 chargers, 2 new spare sweeping brushes and additional accessories; various body parts newly painted, age- and usage-related wear, roadworthiness certificate valid until 07/26. Spray mist against dust only partially possible. Technical data SEE IMAGES!

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Kdjdjxnqt Ujpfx Ag Ueg Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. The standard set also includes a special workbench and a metal case with accessories. ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Kdedpfx Agsxndyns Ueg Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 Ksdpfxetrd Hfo Ag Uedg - Out-feed log conveyor with logkicker

Condition: excellent (used), Year of construction: 1998, Cutting width 508 mm Cutting height 305 mm Table size 600 x 560 mm Working height 1000 mm Roll diameter 515 mm Cutting speed 20 - 1000 m/min Saw blade width 3 - 25 mm Saw blade length 3975 mm Saw blade thickness 0.65 - 0.9 mm Drive power 1.5 kW Dimensions L x W x H 950 x 770 x 2000 mm Weight 510 kg Accessories / Special features: • Butt band welding device (only suitable for carbon band saw blades up to 0.65 mm wide and not for bi-metal M 42!) • Continuously variable cutting speed • Digital display for the cutting speed Kdodpfx Agjvkx H Es Uog • Support table can be swiveled in 2 levels Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, type of cooling: water, welding current (min.): 2 A, welding current (max.): 500 A, High Efficiency Aluminium Welding Improvement of the welding quality due to a variety of functions Current regulation via a torch switch Improved welding of thin sheet through „Silent Pulse“-function High concentrated welding arc improves the welding of butt-joint and cold arc applications Excellent arc start characteristics by high frequency or lift-start Control panel protected against accidental impact Applicable Fields: Chemical Industry, Pressure vessels, Automotive, Motorcycles etc. Applicable Materials: Aluminum, Stainless steel, Mild steel, Titan, Magnesium, Copper etc. Test welding is possible. Ksdpfx Agjxx Tzps Uodg A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Söderhamn Eriksson Band Sawline 3 quad saw grups included reducers, 120 mm – 500 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 5.5(6.2) m. Feeding speed of the sawing line can be adjusted from 25 m/min to 90 m/min. - Top diameter: 120–500 mm - Maximum log diameter: 550 mm - Cant width in Chipper Canter 1: 75(82)–410 mm - Cant width in Chipper Canter 2: 75(82)–410 mm - Saw kerf: 2.7–3.2 mm - Chip length: 20–30 mm Sawline: 1) Log infeed 2) Butt-end reducer 1200mm 3) Debarker Cambio 850 (six tools) 4) 3D log sacnner (rema logbark) 5) Automatic log turner 6) Customill sawgrup 1 included reducer (4 bands) 7) Bord separator (first sawgrup) 8) Reducer 2 Söderhamn/Kocum 240-12 9) Customill sawgrup 2 (4 bands) 10) Bord separator (second sawgrup) 11) Customill sawgrup 3 (4 bands) 12) Edger line 1 Söderhamn Edgar 5200 (up to 35 pcs/min) 13) Edger line 2 Catech/Arivislanda (up to 40 pcs/min) 14) Gunnarssons combisorting line 40 pins (trimming 3 dm stepps) 15) Renholmen stacker W=1,6mH=1,6-1,8mL=5.6m Kdsdpoyag T Nofx Ag Ueg 16) Automatic stick layer system of stick placers (25x50x1630) Waste handling conveyors electric and control system, hydraulic systems included.

Condition: used, Type: SMH 060 Band saw blade grinding machine. Strip width up to: 60 [mm]. Power: 400 [V] / 50 [Hz]. For removing the weld bur from butt welded joints. Kdedst Iv Tyjpfx Ag Ueg In used condition, cleaned, repainted and tested.  2 pcs on stock.

Condition: used, Year of construction: 1997, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Ksdpfxow Snpis Ag Uodg Annealing timer. Blade positioning device. Year of manufacture: 1997. Automatic annealing temperature control. Welding wood strip up to 100 mm. Bimetal strip up to 80 mm. Connection: 3 x 220 V. (3 x 400V available on request) Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Instructions and packing included.

Condition: used, functionality: fully functional, Type: BAS Max welding width up to 50 [mm]. Flash Butt welding machine. Manual clamping. Blade width up to 50 [mm]. Used machine in working condition. Machine painted. Weld band saw blades for wood up to 50 [mm]. Weld band saw blades for metal up to 34 [mm]. Delivery from stock. Kedpfx Asw Snu Ssg Uodg Connection: 220 [V]. Weight: cca. 180 [KG]. Packing included.

Condition: used, Year of construction: 2001, functionality: fully functional, Model: BAS 051. Automatic Flash Butt Welding Machine for Band Saw Blades. Pneumatic clamping. Annealing pyrometer. Inserting bar for blade positioning. UniOp automatic annealing temperature control. Machine cleaned and repainted. Year of manufacture: 2001. Nominal primary voltage: 380 [V AC]. Max. welding rating: 8 [kVA]. Clamping force: 20 [kN]. Forging force: 5 [kN]. Welding ranges. Band saw blades for wood: 6-50 [mm]. Kodpfxsxcnzre Ag Uodg Bi-metal bandsaw: 6-41 [mm]. Hoop knives: 6-50 [mm]. Stainless steel bandsaw: 6-30 [mm]. Weight: 600 [kg]. Dimensions (W*D*H): 1350*1000*1700 [mm]. Instructions and packing included.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle motor power: 18,500 W, Homag CNC Machining Center BAZ 211/60/K Venture 21 XXL with 6 m working length, PowerEdge edge banding unit, renewed vacuum pumps, Windows 10, and WoodWOP 8.1, in very good condition: – Workpiece length 6000 – 6175 mm – Pendulum processing 2375 – 2550 mm – Workpiece width 1400 – 1550 mm – Maximum workpiece thickness 300 mm – Working height 950 mm (underside of workpiece) – Modernization I 2023: – 2 new rotary vane oil-lubricated vacuum pumps – Capacity 2 x 63 m³/h = 126 m³/h – Retrofit kit for separate cooling unit for main spindle – Modernization II 2024: – New machine PC with Windows 10 operating system – Upgrade to WoodWOP 8.1 – 4-axis CNC machining center – K console table – 10 consoles incl. front stops – 6 rear stops – 6 lift rails – 2 side stops each left/right/mirrored – 2 pneumatic connections per machining position – 2 vacuum connections for templates – C-axis with aggregate and electronic interface – Safety device with anti-slip mats – Main spindle 18.5 kW vector controlled – Liquid cooling for main spindle – 10+18-position disc tool changer: – 10-position disc changer moving with main spindle – 18-position disc changer moving with X-support – MPU drilling head 30 spindles V20 / H10 / S360° – MultiProcessingUnit with C-axis +/- 185° – 20 vertical high-speed spindles – 10 horizontal spindles – Grooving and separating saw 200 mm – PowerEdge 360° edge banding unit – Pickup station moving with X-support – Edge thickness 0.4-3 mm – Max. edge height 65 mm – 360° edge banding with butt joint – Pre-trimming station and single roller for PowerEdge – Hot air nozzle for edge banding unit – Combined flush trimming and finishing unit WD 60 mm – Flush trimming of edge overhangs – Finishing pre-milled edges – For use in main spindle – Probing for compensation of workpiece tolerance – 2 WPL radius cutter heads – 2 profile cutters for finishing unit – C-axis extension for Flex-5 unit – 10 LED position display systems for consoles – Optical LED display system – For positioning clamps and consoles – 4-fold configuration with 2 x 2 clamping positions – Separate vacuum systems – Detachable console for adjustable side stop – 2 additional side and longitudinal locating pins – 2 additional clamping consoles 1300 mm – 2 additional side and longitudinal locating pins – 2 additional lift rails for console table – 12 vacuum clamps 160x115x100 mm – 10 vacuum clamps 125x75x100 mm Kjdpfsx Dzbzex Ag Ujdg – Saw/drill unit with 2 spindles for tool changer – Saw blade diameter up to 240 mm – Side wall safety fence (left) – Rear safety fence – Side wall safety fence (left) – Year of manufacture 2008, single owner, very well maintained – Machine serviced regularly – No maintenance or repair backlog, no major defects – For sale ex location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and trial run possible by arrangement

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Kdjdpfx Agsd Tx D Uj Uog

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Kjdpou Rdr Rjfx Ag Uodg Width 1100mm Depth 660mm STANDARD FEATURES Overload switch Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Mitre guard for angled cuts Quick rip fence for straight cuts