Used Bulmak for sale (8)

Condition: used, Year of construction: 2012, turning diameter over bed 0500 mm Njlhov Ey N Docdw Eecr turning diameter over slide rest 300 mm turning length 1500 mm centre height 245 mm centre distance 1500 mm spindle bore 72 mm speeds 20 - 2000 U/min feeds longitudinal slide 0,039 - mm/U weight of the machine ca. 3,0 t dimensions of the machine ca. 3 x 1,5 x 1,5 m voltage 380 V connected load 7 kW Machine has a cover at back side, Multifix tool holder system, chuck, DRO, steady rest (has to be adjusted) and accessories.

Condition: used, SILISTRA / BULMAK Type OH 254 Automatic Hacksaw Machine No. 862919, Year of Manufacture 1986 Cutting Capacity - Round Ø 250 mm Cutting Capacity - Square 250 x 250 mm Cutting Speed 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-changing Power supply 380 volts, 50 Hz - Automatic straight-cutting machine for 90° cuts only - Saw motor with 2 speeds and 3 V-belt speeds - Saw frame with hydraulic lowering and raising - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electric contact stop) approx. 800 mm - Gripper feed with electric feed drive via threaded spindle for automatic material transport - Hydraulic material clamping with continuously adjustable clamping force - Coolant system in the machine base - Electrical control cabinet next to the machine Ncelhewb Hxvocdw Eer Space requirement L x W x H 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: as good as new (ex-display), rotating bezel Make Bulmak type C 400 TS Nolhcdef I Smzow Eocr Height 160 mm Height from clamping surface to middle of steady rest. 160 mm maximum shaft diameter 110 mm weight 14 kg

Condition: good (used), Year of construction: 1999, – ISO40 – 50/1600 t/m – Table 1120 x 250 mm – Automatic feed on the X-axis – High-speed feed – 3D milling head Njlhcdwsv Irvzs Eocr – Cooling system – Lighting – Protective cover – Emergency stop – Documentation – 400V

Condition: used, Year of construction: 1976, Technical details: bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 255 mm drill capacity in cast iron: Ø 40 mm spindle taper MT: 4 spindle speed:: bis 1500 / 6 step U/min feed: 0,1 - 0,16 - 0,25 - 0,4 mm/U feed:: automatisch / manual mm/U throat: 320 mm table clamping surface:: 400 x 400 mm Ncelsv Sb Injhcdw Esr Distance spindle/table max.: 50 - 700 mm drill table adjustment: 650 mm distance ground floor - spindle: 1185 mm base plate surface area: 560 x 435 mm column diameter: 160 mm total power requirement: ca. 2,2 kW weight of the machine ca.: 720 kg dimension machine xH: 1,0 x 0,6 x 2,5 m Spindle right/left rotation Work table can be rotated and tilted left/right Coolant tank/coolant device Machine illumination *

Condition: used, Year of construction: 2009, turning diameter over bed 0440 mm turning diameter over slide rest 230 mm turning length 1500 mm centre height 210 mm centre distance 1500 mm spindle bore 62 mm speeds 20 - 2000 U/min feeds longitudinal slide 0,039 - mm/U weight of the machine ca. 2,1 t dimensions of the machine ca. 3 x 1,5 x 1,5 m voltage 380 V connected load 7 kW Machine has a cover for the chuck, cover at back side, Multifix tool holder system, chuck, DRO, steady rest and accessories. Ncelhcdwjv Ey Nws Eor

Condition: used, L + Z lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Mach. No. 8169 Year of manufacture 2002 Center distance 1000 mm Turning diameter over bed 320 mm Center height over bed 160 mm Ncolhcdwsvt U Tms Eor Turning diameter over support 190 mm Center height over support 95 mm Spindle bore 32 mm Spindle speed (clockwise rotation) 85 - 2000 rpm. 12 levels Spindle speed (anticlockwise rotation) 1 rpm. 6 levels Feed longitudinal and planar Chuck flange short taper DIN 55027 size. 5 Tailstock inner taper MK 3 Drive power 2.2 kW Power supply 400 volts, 50 Hz - 3-axis digital display RSF, type Z 7 - Spindle speed over 12 gear stages in the direction of machining rotation - Spindle speed over 6 gear stages against the direction of machining rotation - 3-jaw lathe chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool holder - Coolant tank with pump in the machine base - Spindle brake via direction of rotation lever - Emergency stop via foot pedal and impact switch - Foldable chuck guard - Machine light - Splash guard - Follow-on steady rest - Keyless drill chuck with MK 3 cone - Several change gears - Operating instructions with electrical plan Space requirement L x W x H 2100 x 800 x 1600 mm Weight 750 kg Good condition

Condition: as good as new (ex-display), unused bezel Make Bulmak Maximum opening width 160 mm Height of clamping surface to spindle center 170 mm distance of mounting hole 360 mm clamping surface 410 x 70 mm Total height 490 mm Ncjlhcdwef Hmnbo Esr Depth 460 mm Weight 26 kg