Used Bridge Crane for sale (5,836)

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 Fpelhcdedc Ipmjw Ioi -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: good (used), Year of construction: 1995, Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons Fjlhsb A Ny Eecdw Iopi -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane Fpolhstpkv Ajcdw Isi -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam Fslhodc Iplecdw Iopi -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: good (used), Year of construction: 1993, Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, crane runway girder -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg Fpeleyzw Iushcdw Ioi

Condition: used, functionality: fully functional, Year of construction: 1997, 2 units Figee overhead crane, 35 tons, with swiveling hook, span approx. 18.60 m, and one unit approx. 21 meters, lifting height 10 meters. Fslhjw S D Izscdw Iopi

Condition: good (used), Year of construction: 1979, Bridge crane, manufacturer DEMAG, type: EKKE, year of manufacture 1979. Fpelhcdoh Uqbfew Iei Load capacity: 7500 kg. Span: 7500 mm. Hook height: 5500 mm. Complete with travel motors and hoisting gear from DEMAG. Crane documentation and inspection records, reports, and plans are available. Includes 20 meters of power rail.

Condition: used, Single-girder bridge crane with hoist, DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width 50 mm T-beam profile: height 320 x width 300 mm End beam length: 2425 mm (+ buffer pads, 60 mm each) Hoist, DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Fslhcjzd Urtsdw Ijpi Load capacity: 5 tons Rope arrangement: 4/1 Rope diameter: 8 mm Hook travel: 6 meters Main hoisting speed: 5.0 m/min Fine hoisting speed: 0.83 m/min Classification group: M5 Overall height from top of T-beam to bottom of crane hook: approx. 1100 mm Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Power supply: 400 volts, 50 Hz - Control box suspended on cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Space required for transport (crane bridge only): L x W x H: 4830 x 2540 x 1200 mm Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Condition: good (used), 15-ton self-propelled gantry crane Brand: (CATERPILLAR) Perkins engine The machine is in very good working order. Fpolhcdeh Su Iasw Ioi Included in the price: dismantling and loading onto a truck.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: Solomat, Solomat / Donati / Demag hall crane, portal crane, bridge crane including floor-mounted guide rails Dimensions of the steel structure: approximately 26 x 13m with 1x Demag bridge crane 2.5t - gauge 12.9m Useful load/lifting capacity: 2000KG - 2t Technical data of the system: Length of guide rails including power supply: approximately 26m Overall width, outer edge: approximately 13.1m Total crane height: approximately 3.9m Top of bridge: approximately 3.9m Bottom of bridge: approximately 3.6m Hook height: approximately 3m Gauge: 12.9m Crane girder: HEA340 Carriages: HEA180 Fpolhcdwjzhik Es Iei The system will be delivered complete: - 1 bridge with a 2000kg Donati chain hoist with floor control including carriages and steel structure - Control system including Demag DRS 125 wheel blocks including drive - Guide rails and power supply The crane is dismantled and immediately available Inspection record and CE certification are available The location of the item is 75053 Gondelsheim Very good condition, see pictures. Hardly any operating hours! Shipping by freight forwarder or collection only by prior arrangement.

Condition: used, Year of construction: 1970, machine/vehicle number: CR2353, Abus / Steel - Year of manufacture approx. 1970 - Abus chain hoist, year of manufacture 2004 1-girder suspended crane, bridge crane, overhead traveling crane, gantry crane, suspended crane system Load capacity 2000 kg Fpslhezgcmdocdw Iji Width approx. 8 m, gauge approx. 7 m Crane girder HEA240 Runway girder approx. 200 mm Including travel units, complete control system, floor-level operation via control panel, 2-strand chain hoist All cranes can be moved electrically in all 3 axes Lifting height/hook travel approx. 4 m Connection to 400V 16A Year of manufacture approx. 1970/2004 Good used condition Shipping via freight forwarder, collection preferred Location 75053 Gondelsheim Please request shipping prices based on your postal code; we will provide you with an immediate and non-binding offer!

Condition: new, functionality: fully functional, fuel type: hybrid, color: blue, overall weight: 2,900 kg, empty load weight: 2,900 kg, operation weight: 2,900 kg, lifting power: 2,980 kg/m, tire condition: 100 %, Year of construction: 2024, operating hours: 1 h, Equipment: adjustable boom, crane, hydraulics, low noise, onboard computer, rubber tracks, 🔧 Key Specifications: • Year: 2024 • Operating hours: 1 h (NEW) • Max capacity: 2,980 kg (main boom) / 1,000 kg (with jib) Fpjlhcsy Hqhrodw Isi • Max lifting height: 16.95 m (with jib) / 12.0 m (main boom) • Max working radius: 14.3 m • Power: Bi-energy (diesel + electric + battery) • Remote control: Fully proportional radio control • Hydraulic winch: Yes • Jib: Hydraulic telescopic jib included • Undercarriage: Variable crawler gauge • Outriggers: Automatic multi-position outriggers • Tracks: Rubber tracks (non-marking) • Weight: approx. 2,900 kg • CE certification: Yes ✨ Highlights: ✅ Bi-energy spider crane (diesel + electric operation) ✅ Suitable for indoor & zero-emission working ✅ Fully proportional remote control ✅ Hydraulic winch for precise lifting operations ✅ Hydraulic telescopic jib for extended reach ✅ Variable crawler gauge for maximum stability ✅ Automatic multi-position outriggers ✅ Compact design for confined spaces ✅ Ready for immediate deployment ⚙️ Condition: New machine — never used. Factory-new condition with full inspection and CE certification. 🌍 Location & Price: 📍 Sittard, Netherlands 🚚 Worldwide delivery available 💰 Price: €119,500 (EXW / excl. VAT) 🚚 Delivery: • Crane loading available • Flexible transport options • Handled by Collé Rental & Sales logistics

Condition: used, Double-Girder Overhead Crane, KONE / Konecranes, 25/25 t (max. 30 t),Bridge crane, Used machine Manufacturer: KONE Cranes / Konecranes Drawing No. / Type Specification: HK 0049 - M / HK0049 - E01 Lifting capacity: 25/25 t (maximum tested lifting capacity: 30 t) Span profiles: 14 m Lifting height (travel): 15.5 m Folhezi Ua Iscdw Ijpi Condition: Used, in excellent and continuously maintained condition, ready for immediate operation Special feature: The crane comes with complete factory and periodic service documentation, including manuals. In 2023, it underwent an official Konecranes factory wire rope replacement (fully certified), and it has been upgraded with a modern, integrated Konecranes radio remote control and frequency inverter drive system. Overall dimensions: 14,318 mm (total bridge length) x 4,334 mm (total height) Technical and operating parameters: Crane classification (according to FEM): Steel structure: 2 / Machinery: 1 Am Rated lifting speed: 3.2 / 0.5 m/min Trolley travelling speed: 16 / 5 m/min Bridge travelling speed: 20 / 5 m/min Installed motor power (Lifting): 15 / 2.5 kW (30% ED, per hoisting drum) Installed motor power (Trolley): 2x 0.65 / 0.15 kW (40% ED) Installed motor power (Bridge): 2x 1.8 / 0.5 kW (40% ED) Supply voltage: 3x 380V, 50Hz + N Control voltage: 48V, 50 Hz Main fuse: 160 A Crane control: Upgraded Konecranes radio remote control for standard operation, plus an independent backup pendant control festooned along the bridge Power supply: Festoon cable system Environmental fire hazard classification: Class "C" Protection class: IP 55 (motors), IP 54 (control panel) Safety devices: Hoisting drums are equipped with electronic overload protection, limit switches for both bridge and trolley travel.

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail Fslhcdwsptlblo Ispi 2 pieces available, price per piece

Condition: ready for operation (used), Bridge Crane 5t, Demag Bridge Crane 5t, Crane 5t, Used Machine Manufacturer: Demag Overall dimensions: 10,700 x 3,000 mm Electrical data: 400 V; 50 Hz, total current = 18 Amps Hoisting unit: Demag P35 Load capacity: 5,000 kg / 5t Rope length / lifting height: 8 m - Wired remote control - Crane travel motor refurbished - Trolley motor refurbished Fpelhcswd Hhcjdw Isi

Condition: used, 5tSWF Krantechnik GmbH Fpeljdc A R Tshcdw Ioi

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Fpelhcdjvbh Rhsw Ioi Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *

Condition: used, Year of construction: 1992, Technical details: lifting capacity : 2,0 t lifting height max. hook position: 2,3 m travel of hook: max. 3000 mm wheel base: 520 mm total power requirement: 2,3 kW Fsleu Nvgdohcdw Iepi Crane with carrier and electric rails: -double - T - beam 200 x 200mm, length approx. 10.100mm, travel 9.000,00 mm -Steel lifting gear, load capacity 2000kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, track 200mm, axle distance 520mm, Chain hoist, hook -Pendant control panel Pendant station -div. mounting holes *

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: SI4to, ! Bargain price! Vetter / Stahl bridge crane, crane track, hall crane, portal crane Monorail Type P300S Steel structure length approx. 4.2 x 2.6 m Fjlhcdektkzbew Ijpi Outer edge of portal approx. 4.2 x 2.6 m, inner edge of portal approx. 3.7 x 1.9 m Lower edge of bridge approx. 3.8 m, hook height 3.2 m Max. overall height of the system approx. 4.6 m Lower edge of purlin / bracing approx. 3.57 / 4.2 m Runway: HEA340, supports: square tube 200 x 200 mm Girders / purlins: IPE240 / HEA340 Stahl lifting mechanism SH5025-20 4/1, year of manufacture 2001, lifting height approx. 8 m Support spacing: Runway with overhang, length approx. 6.5 m Useful load / lifting capacity 4000 kg / 4 tons Incl. power supply rail, switchgear cabinet, and floor control Connection to 400V 16A Very good condition Year of manufacture 2004, complete crane documentation is available Shipping by freight forwarder, collection preferred Please inquire about shipping costs based on your postal code; we will immediately provide you with a non-binding offer!

Condition: ready for operation (used), Year of construction: 1999, Load capacity: 2500kg, span: 18,600mm, weight including trolley: 3090kg, operating mode: floor control via push-button pendant, control system: electric, number of crane travel wheels: 4, wheel diameter: 160mm, micro-speed crane travel: 10m/min, crane travel speed: 40m/min, protection class: IP55, brake: disc brake, with crane limit switch, with documentation. An on-site inspection is possible. Fjlhjzadlcocdw Iepi

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. Fpelhcdeykbimew Iei ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, overall weight: 8,000 kg, total length: 16,300 mm, load capacity: 12,500 kg, Manufacturer: STAHL Crane Komép bau " Completely renovated in 2011" Span: 16.3m Fpolhoxtmhlscdw Ioi Lifting height: 10m Load capacity: 12.5t Modernized, wired remote control system, new STAHL 12.5t trolley

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, overall weight: 3,100 kg, total width: 10,600 mm, load capacity: 8,000 kg, working height: 9,000 mm, GZUT/SWF bridge crane 8t, 10.4m, emag: 9m in excellent condition for sale Manufacturer: GZTU Type: LNE Folhcox Dk A Ijdw Iopi Year of manufacture: 2004 Lifting capacity: 8t Span (cone crown distance): 10.4 m Total width: 10.6m Bridge running gear speed: 20 m/min Lifting speed: 5 / 0.83 m/min (two-stage) 400 V / 50 Hz Dead weight: 3.1t Noise level: Lm(A) ≤ 85 dB(A) With wireless remote control, documentation. Additional information, exact dimensions can be found in the pictures.

Condition: used, Year of construction: 1995, weight max. 5 t stroke 7000 mm Foljyutvmehcdw Iepi clamping width 10000 mm weight of the machine ca. 3220 kg 41 Factory No. 18/703395 Test log available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2012, radio controlled; 2 trolley, Max. Capacity 30t; Span 14.100mm; Trolley 1.600mm; Impeller Diameter 420mm; Trolley Diameter 280mm; Nr. of Wheels 4. including, steel pillar construction, crane runway(blue color metal parts). Felhcdolz T Nkew Ijpi