Used Brian Exeter Spindle Moulder Tf 900 for sale (17,596)

Year of construction: 2018, condition: like new (used), Maximum milling height, mm 120 Maximum diameter of cutters, mm 250 Kdedpfehlhgzsx Anwen Vertical stroke of the spindle, mm 120 Shaft rotation frequency 6000, 8000, 10000 rpm

Condition: used, Year of construction: 1980, machine/vehicle number: 18.742, Table milling machine with rigid milling spindle Table size 1,920 x 900 mm, Motor 6/8 kW (8/11 HP), 4 speeds 3,000/6,000/4,500/9,000 rpm, Milling arbor D = 30 mm with Morse taper MK 5, weight approx. 700 kg, ex location Seevetal, Sale in "as is" condition as inspected, Kdjdpfjul Sfmox Anwen without transportation, subject to prior sale

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swing Spindle Moulder TX 160 "Partnership Edition" Fence including parallel adjustment with handwheel and digital readout, Handwheel adjustment with digital readout for front fence jaw, Electric travel swing mechanism for the complete fence, Quick-release lever for locking, Aluminium fence jaws and pressure device, curved fence, Electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for the selected spindle speed, Electrics and safety devices according to CE standards, Table dimensions: 2,500 x 780 mm, Spindle: diameter = 30 mm, height = 140 mm, Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm, Max. tool size under table: diameter = 320 mm, height = 50 mm, Motor: 7.5 kW / 10 HP, 400 Volt, 50 Hz, Including automatic star-delta switch, Sound level according to EN 27960: 83.9 – 87.3 dB(A), Spindle tilt: -45° to +45°, Electromotive spindle tilt adjustment including electronic readout and decimal impulse setting, "Partnership Edition" complete with: "L" version with bilateral table extension and pull-out workpiece support with EMERGENCY STOP button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Kedpfx Anovlw Idjwsdn Forward/reverse rotation in accordance with CE standards, Prepared for installation of AIGNER integral fence jaws, Available ex-location Seevetal, without pre-carriage, freight, or commissioning, As inspected, subject to prior sale.

Condition: new, Table dimensions 1.200 x 780 mm Kodpfx Anoxyafqjwodn Motor output 7,5 kW Spindle diameter 30 mm

Condition: good (used), Year of construction: 1991, I sell the heavy duty fourside moulder Weinig Unimat 17 Feeding speed 6,5 - 49 m/min. Working width 170mm Working height 130mm 7 spindles (6+Universal) Configuration: bottom - right - left - right - top - bottom (motor missing) - universal Total power apprx. 33kW Incl. Moulding heads and accessories on photos. Machine suitable mostly for wooden facing, parquettes and floors production. Fully working! Sellable immediately Deffects: broken entry table (can be underlaid like on the photo) Ksdpfxof Rtgkj Anwjdn 1 pc. Motor for spindle nr. 6 missing

Condition: good (used), Year of construction: 2008, I sell the fourside moulder Weinig Unimat 300, year 2008 Feeding speed 5-30 m/min. Working width 230mm Working height 130mm 5 spindles Kodjr Arr Ejpfx Anwjdn Configuration: bottom - right - left - top - bottom Total power 28kW 3-zone pneumatical pressure Good condition Fully working! Available immediately

Condition: excellent (used), Year of construction: 1980, I sell the small double side moulder Holz-Her 1710. Feeding with top Feeder Working width 110mm Kjdpjyc N Eaofx Anwjdn Working height 90mm 2 spindles Configuration: right - left 3KW Total power apprx. 5,5kW Machine suitable for small elements, lamellas, beehives. Fully working! Very good condition. Sellable immediately

Condition: new, Year of construction: 2024, I sell the new fourside moulder LEADERMAC COMPACT 623C (2M), New machine year 2024. Showroom machine ! Configuration 6 spindles: Bottom 5,5 kW / 7,5 HP Right 5,5 kW / 7,5 HP Left 5,5 kW / 7,5 HP Top 7,5 kW / 10,0 HP Right moulding head 11 kW / 15,0 HP / adjustable speed Left moulding head 11 kW / 15,0 HP / adjustable speed Feeding speed adjustable 6-36 m/min. Feeding motor 3,0 kW / 5,5 HP + inverter Element width max. 15-230mm Element height max. 10-150mm Alle 6 Spindels 6000 rpm. / the left and right squaring moulder with adjustable speed Electronic programmer for setting the top spinde, aka working height. Ksdperfuc Rofx Anwedn Material pressures for short elements. 3-zone pneumatic pressure system for feeding wheels. Total weight 4500kg. Total power 51,18 kW / 68,25 HP Fully working. Available immediately Showroom machine, fully NEW ! Tools, Moulding heads, squaring heads, and all accessories included.

Condition: new, Year of construction: 2024, I sell the new fourside moulder LEADERMAC COMPACT 430, New machine year 2024. Showroom machine ! Configuration 4 spindles: Bottom 7,5 kW / 10,0 HP Right 7,5 kW / 10,0 HP Left 7,5 kW / 10,0 HP Top 7,5 kW / 10,0 HP Feeding speed adjustable 6-24 m/min. Feeding motor 7,5 kW / 10,0 HP + inverter Element width max. 15-300mm Element height max. 10-200mm Alle 4 Spindels 6000 rpm. Kdjdpfx Asrfud Isnwon Schneider Touch-Screen EASYSET Electronic programmer for setting the working width, top spinde, aka working height, and height of the pressure zone. Material pressures for short elements. 3-zone pneumatic pressure system for feeding wheels. Total weight 4000kg. Total power 39 kW / 52 HP Fully working. Available immediately Showroom machine, fully NEW ! Incl. CE and complete Documentation !

Condition: good (used), Year of construction: 2007, I sell the heavy duty fourside moulder GAU-JING 930D-CE. Element max. 300x200mm ! Feeding speed up to 36m/min ! 5,00m long infeed table hard chromed! 9 spindle configuration: Bottom 11kW (15HP) / 6000 rpm Bottom 11kW (15HP) / 6000 rpm Right 7,5kW (10HP) / 6000 rpm Left 7,5kW (10HP) / 6000 rpm Right 7,5kW (10HP) / 6000 rpm Left 7,5kW (10HP) / 6000 rpm Top 11kW (15HP) / 6000 rpm Top 11kW (15HP) / 6000 rpm Bottom 11kW (15HP) / 6000 rpm Feeding motor 11kW (15HP) Total power 100 KW / 160 A Total weight 10.000kg. Element max. 300x200mm ! Moulding heads and accessories included in price. 3 hydro heads out of that. Electronic programmer for the working width and height adjustment of the pressure zone and top spinde, aka working height. Feeding speed adjustable by inverter. Feeding rollers in table. 13-Zone pneumatic pressure system for feeding wheels. Kdsdorcb T Tepfx Anwen Very good condition. Available immediately. Possible to test. Including fully documentation and CE.

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Kjdpfsxqp Ngsx Anwsdn

Condition: reconditioned (used), functionality: fully functional, 4 speeds 3000/6000/4500/9000 rpm. right/left rotation Spindle lock by foot control Kodpfx Ansittnzewjdn Milling stop with fine adjustment spindle diameter 30 mm suction top+bottom each 120 mm spindle wrench open-end wrench 41 mm Cable + plug 16 Amp.

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 height adjustment with hand crank right/left rotation motor brake socket for feed unit Protective covers for hand milling Kedjiinm Hopfx Anwjdn spindle Ø 30 mm Aigner stop suction connection 2x 120 mm speeds: 1400/3500/6000/8000 rpm Instruction manual

Condition: reconditioned (used), machine/vehicle number: 591, functionality: fully functional, Motor power 4kW table size 800 x 800 mm spindle Ø 30 mm suction nozzle 120 mm Handwheel height adjustment fence jaws individually adjustable right/left rotation speeds 3/4/6/9000 rpm Kedpsiw D Uhefx Anwsdn no brake

Condition: reconditioned (used), Year of construction: 1966, machine/vehicle number: 662310, functionality: fully functional, Connected load 380V 3kW + 4kW right/left rotation Kdodpfjiw D N Djx Anwen Star-delta switch 2800/4500/6000 rpm and 5600/9000/12000 rpm

Condition: reconditioned (used), functionality: fully functional, Power consumption 380V 4,5kW table size LxW 1050 x 950 mm suction Ø 120 mm Kedoiw D Upepfx Anwjdn spindle-Ø 30 mm right/left rotation electrical change-over for two speeds 3 speeds fence jaws individually adjustable

Condition: not inspected (used), Milling fence with wooden stop jaws, each 760 mm long 30 milling arbor incomplete control panel on top cable w. plug 16 A 130 mm suction diameter table 1000 mm wide, 800 mm deep motor approx. 4 kW, total power consumption 12,5 Amp. belt tension via handwheel spindle height adjustment via handwheel Kdedpfx Aei Atftsnwsn infeed jaws individually adjustable via handwheel

Condition: reconditioned (used), Year of construction: 1962, machine/vehicle number: 7867/162, functionality: fully functional, Power connection 400V 4,0kW suction connection 1x Ø 100 mm, 1x rectangular 300x140 mm spindle Ø 30 mm height adjustable via handwheel spindle brake via line pull Spindle lock via locking pin right/left rotation 2 speeds Kodpfxoh Ux Rwe Anwodn spindle not tiltable LxDxH: 1060 x 960 x 1100 mm weight approx. 650 kg Unfortunately, we cannot answer inquiries without complete contact information.

Condition: excellent (used), Motor 9.5 kW, spindle 30 mm, table length 240 cm, width 35/120 cm Kdsdpfxeyy Np Is Anwjn

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Kdjdpfx Ajurwy Nsnwon

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Kdsdpfx Anogzlpkowsn Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: used, Year of construction: 1966, Swivelling spindle: No Height adjustment: Handwheel Swivel adjustment: - Cutter jaw adjustment: manual Height display: Scale Swivel angle display: - Fence indicator: Scale Spindle diameter: 30 mm Speeds: 2800, 4500, 6000, 5600, 8000, 12000 rpm Motor power: 4 / 5.5 kW Motor brake: Manual Extraction connection: 2 x 120 mm Machine length: 2000 mm Machine depth: 900 mm Kdedpfsxu Dhljx Anwsn Weight: 700 kg

Condition: used, Year of construction: 1993, Spindle tiltable: No Height adjustment: Handwheel Swivel adjustment: - Cutter jaw adjustment: manual Height display: Scale Tilt angle display: - Fence position display: Scale Cutter spindle diameter: 30 mm Speeds: 3000, 4000, 5000, 6000, 8000, 10000 Motor power: 5 / 6.2 kW Kedpfx Aewv Ncgsnwjdn Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2600 mm Machine depth: 900 mm Weight: 700 kg

Condition: used, Year of construction: 1991, cleaned, function checked, test runRunout: 3/100 mmwith glazing bead cutting sawwith feed deviceused, good conditionMake GuillietType QFPYear of construction 1991Machine no. ROM 8102 V 11889 kW motor reinforcedincl. feed with 4 rollersSpeed levels 3 / 4.5 / 6/8000Milling arbor diameter 50 mmClamping height 270 mmStorage location from locationDelivery in the current condition as seenTechnically tested, without acked.- free on truck - Kdedpfx Anevwf Sbjwsn

Condition: new, New -RUWI Tischfräse Classic- Save working time with tools that can be called up: set up oncethe drive unit is always put back on with a flick of the wristpreset position- Mobile and flexible use in industry and trade: chamfers, grooves,flush milling- Supplement to the table and CNC milling machine- Quality and efficiency thanks to a durable, high-performance motorTechnical specifications:Function: router / under routerTable length: 640 mmTable width: 500 mmTable height: 910 mmDrive units: 3Power consumption: 1050 wattsVoltage: 230 voltsSpeed: 8000 - 25000 rpm steplessMobility: 4 swivel castersCollets: Standard ø8mm, optional ø6mm / ø6.35mm / ø10mmMilling stroke: 43 mmDust extraction connection: 120mmTools on demand: 3Tool height repeatable: YESRetrofittable drive units: No (up to 5 pieces for RUWI spindle moulder L)Weight: 91kg– Completely pre-assembled RUWI spindle moulder M with 3 drive units– Tool concealment– Removable suction tunnel with suction socket ø 120 mm- Operation manualNo. 10002 Kdjdovwf Shopfx Anwen