Used Book Press Machine for sale (68,740)

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air. Kdjdpfx Aajwud Tkjlsi

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine The device is in perfect condition, ready to work. Technical data: 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. The device punches holes and crimps the eyelet in one pass. Ksdpfx Aaeu Umavslsdi Automatic eyelet feeding.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer Kdodpfju Umbaex Aalsi module for wrapping veneer edges ironing rollers barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Condition: new, Table for hard cover making 1050×740 The device is brand new, with a 12 month warranty. European production, based on brand-name components. Work cycle: The operator manually hands the covering material to a gluing device in which the animal glue is automatically applied (working temperature 60-70’C). Ksdpfeu Umbyex Aalodi The covering material sheet with the glue applied, the operator places it manually on the stage, then manually adds the cardboard and joint board sheets. The operator prepares the pre-prepared cover manually to the device in which the top and bottom of the covering material are wrapped up and glued (patented brush system). During the sizing operation, the cover is pressed through the arrangement of the guide rollers. Covers leaving the device are immediately suitable for further processing The machine is equipped with: – A gluing machine applying glue to the top of the sheet – table with a suction – fixing elements for covering material and cardboard – a module for wrapping the cover – receiving table Technical data: Max format: 1050x740mm Min format: 140x140mm Capacity: 100-150 covers / h Thickness of the layer: 80-170 gsm Thickness of cardboard: 1-4mm Wrap up: 13-20mm Temperature of the adhesive: 30-100 ‚C Capacity of the bender: 2-3kg Smooth speed control of rollers and brushes Types of veneer material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1600x1800x1000mm Power supply: 380V Power consumption: 3.7kW Weight: 300kg We invite you to tests to our headquarters Machines are available from stock.

Condition: new, Workshop press 100 tons with electric motor and additional manual operation Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request Kdsdpef Sqcysfx Aalji New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 100 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 100 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer in which we inform you about our general terms and conditions and the right of withdrawal.

Condition: used, Year of construction: 2008, functionality: fully functional, Handfeed station – 14 x feeder – book Block feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Kjdoxtau Ejpfx Aaledi Max. book size 380x320 mm Min. book size 120x100 mm

Condition: used, Prakma book cover rounding machine ( Case Rounding machine) Very good condition, full function. Various rounding radii available. Kdjdety Tr Eepfx Aalei Other machines available (riveting machine, eyeletting machine, bundling machine, corner rounding machine, drilling machine, stitching machine) More machines on stock. Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, For sale: a well-maintained, semi-automatic 180-ton press with low usage, as shown in the pictures. Kdsdpfx Asx Tg Diealji

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for belt presses EBP500, EBP650 and EBP820 capacity up to 2 000 kg/h power: elevator 2,2 kW mill 4,0 (5,5) kW (PS) Kedpfob Ncc Dsx Aaljdi electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 000 mm width 700 mm height 2 400 mm insertion resp. discharge height 800 mm weight 285 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1 500 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen

Condition: new, capacity up to 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 2 “ outside mash discharge height 1 380 mm suitable for pomaceous fruit scope of delivery 12 mm cutting screen Kdedpfx Aasb Ncmmelsi

Condition: new, capacity up to 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 2 “ outside mash discharge height 1 480 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen Kdjdeb Ncntspfx Aalji

Condition: good (used), Year of construction: 2005, Brand: CMC ITALIA Model: HSV 70-20 Year of manufacture: 2005 Automatic lining and laminating line - Automatic gluing machine Heliomat - Carton Spotter - Glue viscosity mixer 1) HELIOMAT HLM75 Gluing Format: 75 x 115 cm, high-pile feeder Paper size: 70 x 110 cm (max.) | 10 x 15 cm (min.) Mechanical speed: 20 pcs/min Machine control and adjustment via computer or manual operation of main functions. Servo drive for speed and precision Electronic speed regulation Glue recirculation Option includes glue mixer and viscometer Detachable feeder for easy cleaning of the gluing unit Continuous paper feeder Standard conveyor belt 1.5 m Paper detection via photocell Reduced maintenance and cleaning times Quick setups Power supply: 7 kW Weight: 820 kg Kdodpsx Npb Nefx Aaloi 2) SPOTTER SPT110 Carton feeder Format: 70 × 110 cm, with external pre-loading Automatic positioning via photocells for 1 to 5 sheets of carton on glued paper Easy and fast format changeover Carton thickness: 0.5 to 4 mm Carton format: max. 70 x 110 cm, min. 15 x 20 cm Mechanical speed: 20 pcs/min Included: loading hopper with original ramp. 3) VIRGO 70 Casemaker Format: 70 × 110 cm, 4-side version Automatic folding from all four sides High precision and power folding on all four sides Easily calendered filling Output data on delivery table Calendar cycle for cover page and edge-to-edge gluing Carton thickness: 1.5 to 4 mm Carton format: max. 70 x 110 cm, min. 14 x 16 cm Mechanical speed: 20 pcs/min Power supply: 3 kW Weight: 960 kg

Condition: new, Year of construction: 2025, HIDRAULIC BOOK PRESS PK-55x38 H -is a double press of very new conceiving for books and agendas -it is quick and simple to use -maximum size of material; 550x380 mm Kjdpfx Asbyhnkoaledi -the new model has a timer

Condition: new, Year of construction: 2025, BOOK CASE ROUNDING MACHINE Kdsdefhgzbopfx Aalsi MAGRAF SK-46

Condition: new, Year of construction: 2025, BOOK BLOCK ROUNDING MACHINE (with heating device) Kdjdobyhnfopfx Aalsi MAGRAF RU-50 is used for rounding the bridge of the book block. Maximum lenght 500mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, product height (max.): 80 mm, product width (min.): 105 mm, product width (max.): 420 mm, product height (min.): 6 mm, product length (max.): 720 mm, product length (min.): 170 mm, A new mainframe computer (IPC) was installed in 2022. Ready for shipment: Machine can be shipped for an additional charge of €1,500! TECHNICAL DETAILS Cycle rate: 60 covers/min Setup time: approx. 5 min Kdodpfx Aewbtmgoalsi Processable formats Cover height: 170 - 720 mm Cover width: 105 - 410 mm Spine width: 6 - 80 mm Material thickness: 1 - 4 mm MACHINE DETAILS Area of application: Processing hardcovers, book covers, and 3-part covers EQUIPMENT - Soft spine feeder

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Kjdpfowhc U Tex Aaljdi

Condition: ready for operation (used), Year of construction: 1993, 5 clamps side glue Kdjdpfx Aaeyagutjlsi premelter dust extractor bag cover feeder

Condition: used, Year of construction: 2015, Perfecta Bookline Plus Perfect Binding Machine Number of Clamps: 5 clamps Glazing unit Mechanical Speed: Up to 2,000 cycles/hour (or approximately 1,800 books/hour depending on configuration) Max Book Size (WxH): 430 x 320 mm (approx. 16.9 x 12.6 inches) Min Book Size (WxH): 110 x 105 mm (approx. 4.3 x 4.1 inches) Book Thickness (Spine): 6 – 80 mm Control Interface: Color touchscreen monitor with Navigator SE UI for motorized/automatic settings Kodpfxexz A Tmo Aaljdi Feeding: Hand feeding station with jogger; automatic cover feeder (top-loading) with scoring Spine Preparation: Milling and roughening station with dust extraction system Counter: 5 mios

Condition: good (used), Year of construction: 1995, Pot hole boring machine Grass ECO Press Year of manufacture 1995 S/N 9502665 Ksdpfok D T Ncex Aaljdi in good condition right and left linear guide (work table can be supplied ) weight approx. 45 kg 380 V - 50 Hz - 2,5 A pneumatic connection - max 6 bar CE marked

Condition: new, Year of construction: 2025, ram adjustment: 120 mm, drop-through hole in table: 220 mm, table width: 720 mm, table length: 1,000 mm, stroke adjustment: 125 mm, pressing force: 150 t, Equipment: safety light barrier, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: IMMEDIATELY FROM STOCK GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Body and welded parts will be stress relieved by vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Kedpevyrywjfx Aaljdi Capacity 150 Tons Table-Ram Distance 500 Mm Distance Between Walls 1080 Mm Ram Adjustment 120 Mm Press Approximate Width 1400 Mm Press Approximate Depth 1900 Mm Press Approximate Height 3000 Mm Table Hole Diameter 220 Mm Table Size 720 / 1000 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 900 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 15 + 0.75 KW Motor Speed 1450 RPM Approximate Weight 12,000 Kg

Condition: new, Year of construction: 2025, table height: 850 mm, pressing force: 80 t, table width: 600 mm, table length: 800 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. Kdsdjvxhb Uopfx Aalsi TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: new, Year of construction: 2025, ram adjustment: 100 mm, drop-through hole in table: 210 mm, table width: 700 mm, table length: 900 mm, pressing force: 125 t, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways Kodpfevxhqvox Aalodi o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 125 Tons Table-Ram Distance 500 Mm Distance Between Walls 1000 Mm Ram Adjustment 100 Mm Press Approximate Width 1250 Mm Press Approximate Depth 1750 Mm Press Approximate Height 2850 Mm Table Hole Diameter 210 Mm Table Size 700 / 900 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 340 / 550 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 11 KW Motor Speed 1450 RPM Approximate Weight 8,500 Kg

Condition: new, Year of construction: 2025, ram adjustment: 150 mm, drop-through hole in table: 260 mm, table width: 900 mm, table length: 1,200 mm, stroke adjustment: 200 mm, pressing force: 300 t, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 300 Tons Table-Ram Distance 530 Mm Distance Between Walls 1280 Mm Kdjdpfsvyr Easx Aalsi Ram Adjustment 150 Mm Press Approximate Width 1700 Mm Press Approximate Depth 2200 Mm Press Approximate Height 3500 Mm Table Hole Diameter 260 Mm Table Size 900 / 1200 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 1000 Mm Stroke Adjustment 20 / 200 Mm Stroke Number/Minute 38 Pcs/min. Engine Power 30 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 18,000 Kg

Condition: new, Year of construction: 2025, ram adjustment: 130 mm, drop-through hole in table: 240 mm, table width: 800 mm, table length: 1,070 mm, stroke adjustment: 160 mm, pressing force: 200 t, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 200 Tons Table-Ram Distance 500 Mm Distance Between Walls 1150 Mm Ram Adjustment 130 Mm Press Approximate Width 1500 Mm Press Approximate Depth 2000 Mm Press Approximate Height 3200 Mm Table Hole Diameter 240 Mm Table Size 800 / 1070 Mm Kedpfjvyr Dijx Aalsdi Mold Clamping Housing Diameter 60 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 950 Mm Stroke Adjustment 20 / 160 Mm Stroke Number/Minute 40 Units/min. Engine Power 18.5 + 0.75 KW Engine Speed 1450 RPM Approximate Weight 14,000 Kg