Used Biesse Rover 336 for sale (326)

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. Bjdpfeyq Avhjx Agzjwi External reference: 7685

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. Bwjdoyf I U Sjpfx Agzei • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: used, The BIESSE SAND REGAL 1350 is an industrial wide belt sander designed for calibration and fine sanding of flat components in the furniture and panel production industries. The REGAL series represents a robust production solution suitable for medium to high production volumes. Bwedpsynb Rfsfx Agzji The machine features a modular design, allowing for a combination of calibration and finishing operations in a single pass, which significantly increases productivity.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input current: 33 A, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, power: 22 kW (29.91 HP), pressure: 8 bar, rotational speed (max.): 12,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, INTERMAC (Biesse) MASTER 35 APERTA CNC Glass Working Centre, year: 2006 Grinding, polishing, milling, drilling, engraving Power supply: 400 V, 50 Hz, 33.4 A, 22.5 kW Bwodpeynl Hksfx Agzsi In good working condition. Available: NOW

Condition: used, Year of construction: 2014, Empty weight: 4.000 kg Price: On request - Machine available from: 2026-01-26 - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Label machine, Loading system, Unloading system - Table length [mm]: 3600 - Table width [mm]: 1800 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bjdexr Evlspfx Agzowi Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts Bjdpsyhqa Aofx Agzjwi B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES"

Condition: ready for operation (used), Year of construction: 2010, This Biesse Techno Kernell was manufactured in 2010. A used multi-spindle drilling line with stacking system, it features infeed and automatic stacking units by Wamhoff. Ideal for efficient, high-volume drilling operations, this machine includes multiple drilling supports both from above and below. If you are looking to get high quality drilling capabilities consider the Biesse Techno Kernell machine we have for tact us for more information. Machine Benefits Technical Machine Benefits • Used drilling line with stacking system • Consisting of: infeed unit / throughfeed drilling machine / automatic stacking unit Bjdpeyap Uvefx Agzjwi • Throughfeed drilling machine / 6 drilling supports from below / 4 drilling supports from above / throughfeed drilling machine / 5 drilling supports from below / 4 drilling supports from above • Note: the technical data and descriptions are taken from the order confirmation at the time. Data is for information purposes only and is not binding.

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Bwedpfjwuckuox Agzei Y axis working area: 1000 mm Main Electrospindle power: 3.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Bwjdowukyqjpfx Agzei Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16

Condition: good (used), Code: 0085 Brand: BIESSE ARTECH - ITALY Model: SINGLE - CE Standard Edgebander for straight and shaped panels with glue pot with automatic feed for edges in wood, pvc, abs, veneer, for furniture, kitchens, panels, joinery, custom-made furniture - CE Standard Technical data Panel height from mm 10 to 60 Edge thickness mm 0,4 - 3 Minimum radius mm 25 Feed speed from 4 to 16 mt/min Glue pot capacity approx 3 litres Motorised feed at variable speed mt/min 4/18 End cutting blade unit for cutting excess edge lengths Tilting table Bodewut Tgspfx Agzswi Telescopic support roller conveyor for supporting large panels Compressed air 6 bar Total power consumption Kw 5,2 Overall dimensions mm 1700 x 900 x 1500 h Weight kg 350 Top/bottom trimmer Speedy Panel height mm 10/60 Absorbed power Kw 1,5 Compressed air 6 bar Overall dimensions mm 900 x 750 x 1150 h Weight kg 10

Condition: used, machine/vehicle number: 008374, Max. panel width: 1000 mm Bwedpfjyng Amsx Agzji Max. panel length: 2500 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 5-Axis Machining Center Biesse C9.50 - Beam table – Material can be clamped with suction cups or hold-down clamps Dual tool magazine configuration – highly flexible for production Top magazine – Revolver type Bottom magazine – Chain carousel (additional saw blade for HSK mounting – spindle) 8 beam tables, supports Bwodpjyl Uuxsfx Agzei 16 kW spindle Very large aggregate/saw unit Becker pump Year of manufacture: 2009

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Main saw blade projection: 75 mm Bodpfx Agox A Tk Ejzowi No of Grippers: 9

Condition: used, machine/vehicle number: 005064, Position 1: Single Edgebanders BIESSE-STREAM B1 7.0 Bwodpfsybaxbex Agzoi Position 2: Panel Return Systems BIESSE-STREAM B1 7.0

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE Bwedpfx Asu Hldmsgzoi

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bedsuqw E Njpfx Agzowi Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: excellent (used), functionality: fully functional, Horizontal blade unit – spare parts Bwedexqalropfx Agzji

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Bedewlbxlspfx Agzswi Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), functionality: fully functional, Biesse unit for lower drilling Bwedpfexqaiqjx Agzji

Condition: excellent (used), functionality: fully functional, Horizontal blade aggregate HSK compatible with Biesse machining center Bsdpfx Ajxqanyogzjwi

Condition: excellent (used), Year of construction: 2009, MC HSK 63 F angle unit for angled drilling below 7 degrees Excellent condition See photos Location: from stock, 54634 Bitburg - available immediately - Bwjdowmr Uyjpfx Agzji

Condition: excellent (used), Year of construction: 2009, MC Biesse HSK 63 F angle unit with 2 outputs Instructions Bjdpjwmtaqofx Agzswi Wrench Collet Location: from stock, 54634 Bitburg - available immediately -

Condition: used, machine/vehicle number: 008383, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Bodpfx Agsx Swcgezowi Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Top pressure belt, fluids Pre-milling cutters, Glue application, Pre-melter for PUR adhesive The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Bjdpfexxlqvsx Agzowi Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min The machine is in very good condition.

Condition: like new (used), pre-milling unit glue station for granulate maximum working height 60 mm guillotine for trimming edge band from roll precision end trimming unit milling unit for edge band excess from top and bottom of the panel profile scraper flat scraper polishing units Bwedpfxoynizle Agzoi machine length 420 cm year of manufacture 2014 weight 1200 kg CE marking