Used Biesse Artech Akron 440 for sale (315)

Condition: used, machine/vehicle number: 007871, Max. panel width: 1200 mm Max. panel length: 3200 mm Godjwimzmjpfx Ai Nouc Max. panel stack height from the ground: 1600 mm Movement system: suction cups.

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) Guodpfoyw Nu Eox Ai Njc • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive Godpfxsydf Nde Ai Nsuc PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: good (used), Year of construction: 2007, I sell the panel beam saw BIESSE SELCO EB75. Year 2007. Cutting size 3200x3200mm. Cutting height 75mm. Main motor 7,5kW Scoring motor 2,2kW Gedpjvw Nkhsfx Ai Nouc Total area covered W.5422mm x D.7688mm Gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 8 mm Release agent application device Grinding unit Infrared preheating zone Gluing system 3 glue tanks (2 tanks for EVA glue and 1 PUR, rarely used) Edge pressing unit End trimming unit Radius milling unit Gsdpfezawvzjx Ai Njuc Rounding unit Edge scraping unit Glue scraping unit Brush unit Control system: Touch Screen Only 59,357 meters of edge material processed Available June 2026

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 50 mm Gujdpfjyngy Sox Ai Nec No of Grippers: 8

Condition: ready for operation (used), Year of construction: 1984, Brand: Biesse Model: Forecon 51 Machine no: 401/83 Year model: 1984 Tech data: 1 horizontal drilling unit with 21 spindles 2 swivel drill units with 15 drill chucks each Center distance between spindles: 32mm Horizontal unit motor: 2Hk Guedpjriutkofx Ai Nec 2 vertical motors: 2Hk Spindles: 2800rpm Air pressure: 6-7 atm Air consumption per cycle: 17 l Total engine power: 5.5Kw Comes with fence, see picture. Machine size: 1500x3140x1500mm Weight: approx. 590 kg Stock no: 2001355

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,140 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working range of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A 1242 machine we have for sale. Contact us for further details. • Working range • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with H=74 mm vacuum modules): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and drives • X & Y: Rack and pinion drive; accuracy class 6 • Z: Ball screw with preloaded nut; accuracy class ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control system and PC hardware • Control: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB Gsdpfxsyt Rrvo Ai Neuc • Storage: 256 GB SSD or higher • Monitor: 21.5-inch LCD color screen • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and pneumatic • Power supply: 380 / 400 / 415 V – 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Cabinet cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7–10 minutes runtime for data protection • Workpiece support (ATS system) • Workpiece supports: 8 ATS aluminum supports on linear guides • Module carriers: 24 carriers (132 × 132 × H41.5 mm) with pneumatic clamping • Set-Up Assistant (SA): Manual positioning with LED indicators; ±1.5 mm precision • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and maintenance • Safety system: Bumper system (front and rear) for immediate stop upon collision • Protection: Polycarbonate transparent front plate and sound-absorbing cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional equipment • Vacuum pumps (supported/optional): Up to two units, 90/100 m³/h or 250 m³/h each

Condition: ready for operation (used), Year of construction: 2020, overall weight: 3,800 kg, This 3-axis BIESSE Selco WN 2 was manufactured in 2020. It features a robust machine weight of 3900 kg and operates on a power supply of 400 VAC with a consumption of 12 kW. The machine is designed for efficient panel cutting and includes a CE marking for compliance. If you are looking to get high-quality panel saw capabilities, consider the BIESSE Selco WN 2 machine we have for sale. Contact us for further details. • Electrical cabinet weight: 190 kg • Power supply voltage: 400 VAC • Full load current: 24 A Gsdeyt Rklopfx Ai Nsuc • Number of power supply phases: 3 • Power consumption: 12 kW • Frequency: 50 Hz • Short circuit rating: 10 kA RMS • Compressed air supply: 6.5–7 bar • Required suction flow speed: 30 m/sec • CE marking: Yes

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Y axis working area: 2200 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Gujdpfxsy Nkrvo Ai Nsc Total number of tool changer positions: 30

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Gjdpsw Idgvsfx Ai Njuc Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 007685, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Operating Units Right Side: 15 nr Godoy Nkqfjpfx Ai Njuc Operating Units Left Side: 15 nr

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Godpfx Aijwuz R Hs Nouc Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Working area X: 3280 mm Working area Y: 1620 mm 5-axis electro-spindle, power 11 kW Drilling heads for vertical drilling: 10 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 1 grooving blade in the X direction Linear tool changer with 12 positions Work table with 6 stops Software: bSolid Control panel BUSCH vacuum pump, 245 m3/h Gusdpfx Aiey Ukv So Nsc Safety mats Protective screens Approximate weight: 3400 kg. Electro-spindle used for only 8 hours, condition like new.

Condition: used, machine/vehicle number: 005062, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Godpfx Aeybawdsi Nsuc Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008359, X axis working area: 2500 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 16 Gujdpfxex Swcaj Ai Nsc Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 2015, For sale: 4 units of CNC ROVER BIESSE 2231. Years of manufacture: 2013, 2014, 2015, 2016. In very good condition. Gedpfx Aiox Tbk Rs Neuc

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Gujdpfx Ajx D H Hcoi Njc Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, overall weight: 1,700 kg, spindle speed (max.): 24,000 rpm, This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine. Guedpfeyfnp Aex Ai Nec • Axes: 3 CNC-controlled (X, Y, Z) • Capabilities: routing, drilling, pocketing, panel machining • Air supply: 7.5 bar • Suction air speed: 30 m/s Additional equipment • Flat vacuum table with suction cups

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. Max. working width (mm) 3200. Min. working width (mm) 215 N. 2 Horizontal units/supports N° 2 Drilling heads for each horizontal unit (11 Spindles for each horizontal drilling head) N. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 2 Top vertical units/supports Gujdpfxoyyw S Rj Ai Njc Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 4 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display. Total installed power (Kw) 62,7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: excellent (used), Numerical Control Type NC 400 Deluxe Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 1 Splindles for each horizontal drilling head (N°) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Godpfx Aisyyw Sds Nouc Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Transport belts to evacute chips (wastes) (N°) 2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts Total installed power (Kw)

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table Gusdpfx Aieidmkre Nsc KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Gedoflc T Sspfx Ai Njuc Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Gedpfx Aied Rg Dzo Nouc Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 Gsdpfx Aiscggy Ss Nsuc - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10