Used Bft for sale (56)

Condition: used, mileage: 914,000 km, power: 340 kW (462.27 HP), first registration: 03/2015, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, wheelbase: 3,800 mm, brakes: intarder, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2015, Equipment: air conditioning, cruise control, differential lock, = Additional Options and Accessories = - Dual Fuel Tank - Electronic Braking System (EBS) - Air Conditioning - Refrigerator - Sunshade = Additional Information = Technical Information Number of Cylinders: 6 Engine Displacement: 12,902 cc Drivetrain AdBlue System: Yes Fuel Tank: 1,195 liters Transmission Transmission: 12A2330, 12-Speed, Automatic Axle Configuration Brakes: Disc Brakes Front Axle: Max. Axle Load: 8,000 kg; Steered; Axle Brand: 163 N; Suspension: Parabolic Suspension Rear Axle: Dual Tires; Differential Lock; Max. Axle Load: 11,500 kg; Axle Brand: 1,344; Reduction: Single Reduction Suspension: Air suspension Dimensions Dimensions (L x W): 616 x 255 cm Weights Unladen weight: 8,572 kg Payload: 11,928 kg GVW: 20,500 kg Functional Body brand: ZF Identification Hnsdsuu Dy Uspfx Aacju License plate: 06-BFT-3 Further information Contact Maurits Van Giessen for further information.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, working range: 4,150 mm, travel distance X-axis: 4,150 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 2,500 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 250 mm, table length: 4,500 mm, operating speed: 1,000 mm/s, table width: 2,300 mm, tank capacity: 8,000 l, pressure: 4.1 bar, table height: 900 mm, operating pressure: 4,000 bar, warranty duration: 6 months, table load: 2,500 kg, overall weight: 8,000 kg, input frequency: 50 Hz, power: 45 kW (61.18 HP), D2 MONSTER M5 high end waterjet cutting machine, completely reconditioned 2025, all vital components replced and condition even better then new. This machine had very little working hours ( showroom useage ) but is currently being completely overhauled to ensure full warranty. The machine will be supplied as new with newest options and developments, including full warranty of 6 months. X-axis range 4150 mm Y-axis range 3200 mm Z-axis range 250 mm C-axis range +/- 275 degrees A-axis range +/- 70 degrees Table size 4500x2500 mm, cutting area in 3D: 4000x2300 mm Tilting arms for loading and unloading slabs up to 2500 kg. Pump BFT Ecotron 40.37 37 KW 3,8 L/min New pump, working hours 0 . Software depending the application ( Metal or Stone ), to be discussed This machine is built for high precision work and foreseen with all possible options from cameras to anti collision feeler, electronic abrasive doseage with vacuum control, etc etc. Machine readyness to be agreed. This machine has a new value over 300.000 euro Water purification for pump water available on request as well as abrasive removal system. Hedjvdnpiepfx Aaconu

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 A second ironing dryer of a similar design is available. Hjdpfxev Hygfo Aacjnu

Condition: good (used), Year of construction: 2016, Conveyor system, TGW, NB 420mm, approx. 1,100m, – used - Price ex-site (net): €269,000 disassembled, packed, and loaded, including control system, feet, etc.! Manufacturer: TGW Year of manufacture: 2016 Condition: Good Available: Immediately Location: Niedernberg Warehouse Here is an excerpt from Hall 2: approx. 42 units Type: KRC KingDrive Roller Conveyor A and T Nominal width (NB) 420 mm Roller pitch: 110 mm Zone length: 990 mm Number of KDRs per zone: 2 units Type of roller: Steel Conveyor speed: Various, e.g.: 0.47 m/s Acceleration / deceleration: 1.5 m/s In various versions As above, only approx. 38 units Type: KRC KingDrive Roller Conveyor A and T Zone length: 660 mm As above, only approx. 4 units Type: KRC KingDrive Roller Conveyor A and T Zone length: 880mm 800mm = approx. 8 pieces 770mm = approx. 3 pieces 412.5mm = approx. 1 piece 330mm = approx. 23 pieces KCS KingDrive infeed/outfeed: approx. 8 pieces 420mm KCC KingDrive curved conveyors A and T, 90 degrees = approx. 6 pieces Hnodpswdizrofx Aacou 420mm 45 degrees: approx. 3 pieces 30 degrees: approx. 2 pieces 55 degrees: approx. 1 piece Roller conveyors length approx. 100mm = approx. 33 pieces 420mm, plastic roller, non-driven Timing belt infeed/outfeed K = approx. 5 pieces 420mm Timing belt transfer K: = approx. 14 pieces 420mm, module length: 800mm PWT pop-up roller transfer: approx. 4 pieces Belt conveyor: approx. 18 BFT2000 GF belt conveyors Nominal width 420 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure Hodovla U Tjpfx Aacsnu 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: used, Accessories for e.g. a bench drill BFT 130: The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Speed max. 600 rpm. Spindle taper ISO 50 Weight approx. 270kg incl. connecting piece to the drive SK 50 pinoler/head Hnodpfx Aou Nlgyoacou *