Used Beveled Skipper 200 L for sale (72,048)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards Chsdpfx Asz Ir Hasd Ijc - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: new, Year of construction: 2022, 28.85 running meters. Wide span shelving 60 cm deep Data : - Height : approx. 200 cm Codpfxoz Iw Nyj Ad Ishc - Depth : approx. 60 cm - Length : approx. 28.85 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 60 cm, disassembled. - 90 x traverse approx. 185 cm. - 45 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Delivery on request by us at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2360,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, * IMMEDIATELY AVAILABLE * Includes pendulum tailgate / Tridem / Double hydraulics / Steel side panels TECHNICAL DATA • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 400 x 200 x 30 cm • External dimensions (LxWxH): 530 x 211 x 102 cm • Platform height: 71 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 1,200 kg • Payload: 2,300 kg • Chassis: High loader (wheels under body) • Tyres: 195/60R12C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side panels • Click & Clamp: The new "Click & Clamp" system for maximum strength and rapid addition/removal of various optional side panels and accessories • Automatically adjustable stanchions and clamped side panels ensure smooth travel without unwanted rattling • Robust built-in latches on all side panels • All side panels foldable and removable • Removable steel corner stanchions • Socket mounts on all 4 corners for tarp frames, mesh extensions, side panel extensions, or front panel extensions • Welded-on net hooks under the platform • Sturdy, rattle-free tension latches on side panels • Galvanized steel sheet on multiplex flooring • Reinforced, solidly bolted V-drawbar • Very robust welded steel frame • Frame completely hot-dip galvanized • Multiple cross members for high point load capacity • Additional continuously welded longitudinal beams • 8 recessed lashing points inside the floor (1000DaN/kg), TÜV certified! Covered with spring steel plates beneath • Swinging rear tailgate on hot-dip galvanized steel • U-profile at rear for easy ramp attachment • Integrated ramp slots for optional loading ramps • Twin heavy-duty 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Detachable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charge: Battery is charged via the vehicle's ignition when the engine is running (depends on towing vehicle) • Battery charge status display • Battery master switch • Maintenance support bar under the platform for service work • ALKO rubber suspension axles • Automatic reversing mechanism • ALKO overrun device and parking brake • Cast steel coupling head with integrated ALKO high-security lock • Tool/storage box mounted on the drawbar • Spare wheel at the rear of the trailer • 13-pin connector • Reversing lights • Complete LED lighting: Extremely bright, durable, and reliable • Dynamic LED indicators • Integrated rear fog light • Various marker lights front, side, and rear • Rear frame lighting recessed • Heavy-duty jockey wheel • 5-year chassis warranty Additional accessories can be retrofitted – please enquire! New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available Cedpfjx Tcfiex Ad Iehc - All prices include VAT - Vehicle registration document can be sent in advance, or export plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg - Errors, omissions, and prior sale excepted -

Condition: like new (used), Year of construction: 2012, operating hours: 1,124 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: BT LPE 200 * EX * Pyroban 3G / Zone 2 ID: 25020.6540 Category: Used Forks: 1150 x 570 mm Capacity: 2000 kg Year: 2012 Hours: 1124 hours Capacity: 24 V / 300 Ah - Year of manufacture 06 / 2020 Cedpfxjzutzhj Ad Ijhc Options: * EX * Atex - Pyroban !!!! System = S6000 E Gas group = IIB Type = 3G (permitted in ZONE 2) Temperature class = T3

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Chsdpoy Exqlefx Ad Ioc Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: excellent (used), Professional external micrometer designed for precise measurement of diameters, thicknesses, and dimensions of mechanical components. The set is equipped with interchangeable measuring tips and calibration standards, enabling operation within a wide measurement range. Technical specifications: • Manufacturer: HOLEX • Measurement range: 100–200 mm • Reading accuracy: 0.01 mm • Interchangeable measuring tips • Calibration standards included Cjdpfx Adjzaf Ulo Ijhc • Wooden carrying case Condition: Used item, in very good visual condition. Completeness as shown in the photos. The mechanism operates smoothly. Normal signs of wear and tear resulting from storage and use. The set includes: • micrometer 100–200 mm, • interchangeable measuring tips, • calibration standards, • adjustment wrench, • wooden case.

Condition: new, For sale: a new, unused Speck T-1001-200.0010 submersible pump with a 2.2 kW three-phase electric motor. Cedpjzvlk Rsfx Ad Ijhc This is an original spare part intended for industrial applications and coolant systems, among others. The pump comes from warehouse stock. The set includes the original accessories shown in the pictures. Pump technical data: Manufacturer: Speck Type: T-1001-200.0010 Article number: HP00000419 ID: 42402 Serial number: 1002750337 Maximum flow rate: 100 l/min Maximum head: 50 m Pump speed: 2800 rpm Year of manufacture: 2024 Country of origin: Germany Weight: approximately 26 kg Motor technical data: Power: 2.2 kW Power supply: three-phase Voltage at 50 Hz: 230 V Δ / 400 V Y Current at 50 Hz: 8.6 A / 5.0 A Speed at 50 Hz: 2900 rpm Efficiency class: IE3 Protection class: IP54 Insulation class: F Mechanical size: BG90 Mounting position: IM V8 Condition: new, in stock. The pump, accessories, and their exact condition match the pictures.

Condition: excellent (used), functionality: fully functional, Eurofold 235, folding machine for 2 bags. In good condition and available immediately! Chjdszgf D Sspfx Ad Ioc All of the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo.

Condition: used, Type : EurobinsMaterials : Stainless steelVolume : 200 LitresQuantity available : 2 unitsDimensions : approx. 70 X 70 X 70 cm Codex R Ax Repfx Ad Iehc

Condition: new, Year of construction: 2022, 11.46 linear meters wide-span racking, 60 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 11.46 linear meters Racking offer includes: - 07 x frames approx. 200 x 60 cm, disassembled - 36 x beams approx. 185 cm - 18 x shelf panels approx. 184.5 x 59.5 cm - Including locking pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per level, with evenly distributed load - Levels: 3 storage levels - Chipboard shelves, natural finish - Blue uprights - New stock, available for immediate delivery - Other quantities available on request Frame pre-assembly can be provided by us for a small additional charge of €6/net per unit. Delivery at favorable rates available on request. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €965.00 net Plus statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged through our partner freight forwarder upon request. Transport costs depend on the destination postal code. Cedpfoz Iw Nmsx Ad Ijhc Assembly: Our trained staff are available to assist with professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Condition: new, Year of construction: 2022, 7.65 linear meters. Wide-span shelving, 80 cm deep. Data: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 9.56 linear meters Shelving offer consisting of: - 05 x frames, approx. 200 x 60 cm, disassembled. - 32 x crossbars, approx. 185 cm. - 16 x shelf boards, approx. 184.5 x 59.5 cm. - Incl. locking pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per shelf, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural finish. - Uprights blue. - New goods, available from stock. - Other quantities available! Pre-assembly of the frames can be carried out by us for a small surcharge of €6 net per piece. Delivery can be arranged by us at a favorable price upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Chedpfxjz Iw Rkj Ad Ijc Price: €815.00 net plus legally applicable VAT. You will receive an invoice with VAT shown. Transport: Upon request, delivery can be arranged by our partner shipping company; the costs depend on the postal code. Assembly: Our trained personnel will gladly assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Please let us know your requirements... We will be happy to help you realize your projects, from planning to ordering to assembly.

Year of construction: 2020, condition: new, We are offering for sale a new shelf connector from the manufacturer Nedcon NS. The scope of delivery includes: 01x SET of spacers, new Length: 200 mm Material color: Sendzimir galvanized consisting of: 01x Spacer, L=200, Sendzimir galvanized 02x Hex head screw 8.8, M10x25 galvanized 02x Lock nut, 6-sided 8.8, M10, flange, galvanized 04x Hex head screws, M10, galvanized Cjdpfsf S Iq Tsx Ad Iehc

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton Chsdolatv Aspfx Ad Iec - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm Chsdstt Da Iepfx Ad Ijc SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: reconditioned (used), Year of construction: 2014, Working width 4000 mm Working height 2550 mm Number of cylinders 6 St. Dimensions (L/W/H) 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for "mortise and tenon" corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550* mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure plates (for triangular/pointed windows) Chodpfx Ajzpblksd Ioc - Surcharge for minimum dimensions - All pressure plates and abutments faced with plastic - Control cabinet located on the inside of the left base leg - Press can be completely disassembled if required (price on request!) - Finish: RAL 7035 Light Grey and RAL 7016 Anthracite Grey Image shows an archive photo of a delivered press. No original photos available yet. (Technical specifications provided by the manufacturer – subject to change/no guarantee)

Condition: new, Year of construction: 2022, 9.56 linear meters Wide Span Rack, 80 cm Deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Rack offer includes: - 06 x frames approx. 200 x 60 cm, disassembled - 40 x crossbeams approx. 185 cm - 20 x shelf panels approx. 184.5 x 79.5 cm - 40 x cross braces (approx. 80 cm, galvanized) - Includes locking pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights painted blue - New stock, available from warehouse - Other quantities available on request Cjdpoz Iw N Hefx Ad Ishc Pre-assembly of the frames can be carried out by us for a small additional charge of €6 net per unit. Delivery is available at a favorable rate upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €1,242.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Shipping: Delivery by our partner shipping company is available on request; costs are based on your postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you throughout your project—from planning and ordering to installation.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. Chodpfxswld Upj Ad Iec System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 2,000 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 2.000 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement Cjdpfx Asxrnchjd Ijhc +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Year of construction: 2000, condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h Chjdpjlzmylefx Ad Isc -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft Cjdpewld Tfsfx Ad Iehc - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: used, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 02/2019, next inspection (TÜV): 11/2026, suspension: air, tire size: 385/65 22,5, tire condition: 40 %, color: silver, Year of construction: 2019, operating hours: 209,230 h, mileage: 209,230 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 41763 Stas, S 300CX * Year of manufacture: 2019 * ABS, Anti-lock Braking System * Alloy wheels * Air suspension * Lift axle * Air connection for coupling head (red + yellow) * 15-pole connector plug * Lifting and lowering device * Storage box / toolbox * Aluminum tipper body * Platform * Roller cover * Grain slide * Inspections: MOT / emissions test valid until 11.2026 * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 5,700 kg * Payload: 33,300 kg * Permissible gross vehicle weight: 39,000 kg * Tire condition, 1st axle: 40% - 40% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 40% - 40% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 50% - 50% - Tire size: 385/65 R22.5 * Tire size: 385/65 R22.5 * 8mm floor * Unladen weight: 5,700 kg * Mileage: 209,230 km (according to SmartBoard) * On request, we will gladly send you further pictures and a construction description. Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing Chedpfez Iv Smsx Ad Iec * Application for all (export) documents * Ordering of export license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists. We will be happy to advise you.

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Chjdpfxjk H Ic Ue Ad Isc Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaner PTC Easypower L B, similar to but not a Dynajet, Oertzen, Falch, Woma, Kamat, or Denjet. - Operating pressure: 200-700 bar - Flow rate: 13-42 l/min - Engine: Kohler Stage V Diesel, 35 HP / 26 kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Dry weight: approx. 260 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance Codpfxjfdzy Us Ad Iohc - Trolley with 4 industrial wheels, 350 mm - Electric starter - Operating hour counter - Incl. 20 m high-pressure hose with stainless steel quick-release couplings, spray gun, lance, and flat spray nozzle 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/min. 280 bar Easy Power L D 42/200 | 42 l/min. 200 bar Easy Power L D 13/700 | 13 l/min. 700 bar

Condition: good (used), Oil cabinet, oil cabinet, oil pump, oil dispensing station Chodjb A Igvopfx Ad Ijc -with counter -Extendable hose with dispensing nozzle -Compressed air connection

Condition: good (used), Year of construction: 2014, first registration: 06/2014, fuel type: diesel, color: red, fuel: diesel, Swingo 200 + - 4 wheel steering - Dutch Registration Year of manufacture: 30-6-2014 WSVS462S2E1730012 TZR-38-N Codpfx Adozzq I Es Iohc = Further information = Intended use: Internal logistics Permissible total weight: 4,500 kg Technical condition: good Visual condition: good Registration number: TZR-38-N Contact VAEX The Truck Traders for more information.