Used Belt Press for sale (35,514)

Year of construction: 2009, condition: used, comprising: 1 vacuum press with heating BÜRKLE type: M8, year of manufacture: 2009, serial no.: , dimensions (WxHxD): approx. 300x180x200 cm, 2 loading tables dimensions (WxHxD): approx. 300x100x180 cm, for alternating loading, 2 film cutters, dimensions (WxHxD): approx. 50x100x200 cm, 2 paternoster racks, dimensions (WxHxD): approx. 100x250x200 cm, with mandrels for film rolls, 1 vacuum pump Gkjdpfx Ajxnam Rjacjc

Condition: used, Year of construction: 1987, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were Gkedpfx Ajwd Nx Deacsc bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1987 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: used, Year of construction: 1981, functionality: fully functional, Braun profile belt sanding machine BP 700, Table tiltable up to 45°, Godpfx Asw E Igpeacskc Width 500 mm, depth 1260 mm, height 1040 mm, Sanding height 200 mm, cutting height 200 mm Sanding belt length 3020 mm Band saw blade length 3050 mm Working width 700 mm Three-phase motor 1.5 HP, 220/380 Volts Belt speed 18 m/s Mobile on base frame

Condition: as good as new (ex-display), Year of construction: 2022, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Godpfx Aoxaaxqsacokc Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: excellent (used), Year of construction: 2018, turning diameter: 560 mm, spindle speed (min.): 1,800 rpm, turning length: 3,000 mm, XYZ Proturn SLX555 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2018) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Godpoxc Nmiofx Aacskc Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2018 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 6340kg Supplied with: 3 Jaw Chuck 4 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders Fixed Steady Interlocking Guards Auto Lubrication. Coolant. Worklight Tooling as Photographed We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79000 Machine Serial Number: SLM00083 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2014, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor with central drive -Type: 1100 -Speed: m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo nameplate -Belt width: 600 mm -Conveyor length: approx. 13800 mm / approx. 1000 mm height adjustable Gedpfsign Unex Aacokc -Set-up dimension: 13880/970/H370 mm -Transport dimension: 4770/970/H1580 mm -Total weight: 478 kg

Year of construction: 2007, condition: used, comprising: 1 heated vacuum press BÜRKLE Type: BTF 1528-1400 Year of manufacture: 2007 Serial No.: 11507-20, dimensions (WxHxD): approx. 350x200x200 cm, table surface approx. 280x170 cm; 1 lifting platen table BÜRKLE Serial No.: 11507-30, with 2 support plates, dimensions (WxHxD): approx. 300x140x200 cm; 1 turning table BÜRKLE, for support plates, Serial No.: 11507-10, dimensions (WxHxD): approx. 400x320x200 cm; 1 BÜRKLE film unwinder Serial No.: 8669-71 with cutting device; 1 KRAFT paternoster storage rack Type: 810-41-00001 Year: 1991 Serial No.: 19603016, dimensions (WxHxD): approx. 220x380x150 cm; 1 BÜRKLE panel table for shaped parts, dimensions (WxHxD): approx. 350x120x180 cm; 1 film unwinder stand; 2 safety light barriers; control cabinets; 1 pressure/vacuum tank approx. 1,500 ltr.; 1 BÜRKLE terminal; 1 HP flat screen, keyboard and mouse. Supply does not include stock of coating film, the remaining material stock is to be properly decommissioned by the buyer as instructed. Gkodpfx Asxnam Dsacsc

Condition: used, Year of construction: 1964, pressure 10 t Gkjdpfx Ajvgnqfeacjc throat 235 mm stroke ca. 400 mm stroke speed - idle stroke downwards 4,5 m/min stroke speed - idle stroke upwards 10 m/min dayligth ca. 500/600 mm table-size ca. 450 x 400 mm ram hole 32 mm total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,95 x 0,45 x 2,1 m Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Gkedpswlkw Dofx Aacoc Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: excellent (used), REF: MM6212 1 X Large stainless-steel framed swan-neck elevator conveyor with flighted belt. Technical specification ⚙️ ✅ Belt width - 365mm. ✅ Infeed height - 550mm. ✅ Outfeed height - 2500mm. Gsdpfexd U Inox Aacjkc ✅ Overall dimensions - 4.3m long x 740mm wide x 2.6m high.

Condition: good (used), Year of construction: 2005, 1 used hydraulic press brake Make: Knuth Model: AHK 31160 Year of manufacture: 2005 Technical data Gkjdpfx Aoxnp A Ueacoc Working length: 3000 mm Press capacity: 160 t Stroke: 175 mm Equipped with: Elgo control Foot pedal Tooling

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Gkjdpfow Nafkjx Aacjc Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2016, Assembly in 2017, consisting of: unwinding and rewinding unit (unwinder/rewinder), each with SIEMENS control system including touch panel, FANUC R2000ic 210f loading robot, control unit (for print unit setup), 8 color printing units (left tower, central tower, right tower). Weight: 16/35/18 t, BST edge guiding system, AHLBRANDT surface treatment (corona station), extraction unit, 5 web tension units, web break sensor, inspection table, BST eltromat register control, serial no.: WA18911, RITTAL control cabinet, PSI electron beam unit with switching and cooling system, pressure vessel, oxygen analysis, BST eltromat web monitoring system, BST eltromat visual defect detection system, year of manufacture: 2017, platform, staircase, mounted control cabinet (for corona station), serial no.: 513783, power: 8 kW, control center (container design), various MITSUBISHI climate control units, specialized media supply (water, electricity, nitrogen, compressed air), central SIEMENS control system, safety fencing, light barriers, total weight approx. 110 t. Godpoxnafasfx Aacekc

Condition: used, pressure 6 t dayligth 180 mm spindle diameter 32 mm throat 115 mm ram stroke 90 mm table surface area 300x270 mm weight of the machine ca. 70 kg Gkjdpfsvgnnwjx Aacoc dimensions of the machine ca. 800 x 1350 mm Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Krupp Electro Magnetic Conveyor Belt, Heavy Duty Block : L= 1650 x W=1200 x H=600 mm Gkjdoxnnddspfx Aacec Power Block = 7,7 kW Power Drummotor = 5,5 kW Beltwidth: 1400 mm, A-A = 3200 mm Speed = 2,5 m/sec. Including rectifier (new) Weight appr. 7500 kg On stock 1 piece.  

Condition: excellent (used), REF: MM6213 1 X Large stainless-steel framed swan-neck elevator conveyor with flighted belt. Gkjdoxd Uywjpfx Aacoc Technical specification ⚙️ ✅ Belt width - 365mm. ✅ Infeed height - 550mm. ✅ Outfeed height - 2500mm. ✅Overall dimensions - 4.3m long x 740mm wide x 2.6m high.

Condition: like new (used), Year of construction: 2008, machine/vehicle number: CA7-360 NG, Rotary press-on capper 7 station incl hopper/sorter Left-right Central greasing Vögel Gkodpfxsr Iyi To Aacec Pneumatic Festo Siemens S7 controlled min 5.500-max 17.000 cap/hr electric height adjustment tooling capping heads: Diam 65mm/27,4mm Hight Diam 75mm/32mm Hight Diam 94,5mm/40,3mm Hight container size tooling for glass bottle: Diam 65.5mm/104mm hight Diam 75,5mm/140,7mm hight Diam 93,3mm/180mm hight electric 6Kw 400v Pressured air minimum 5bar Machine is in excelent condition.

Condition: good (used), functionality: fully functional, Year of construction: 2010, Used 4-meter CNC press brake from Bystronic Model: Xpert 200 4100 Gsdpjxgngiefx Aacjkc Year of manufacture: 2010 Capacity: 4100 x 200 tons Cybelec VisiTouch PAC CNC control (latest model) CNC controlled axes: Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC hydraulic crowning Hydraulic upper clamping (RFA) Hydraulic lower clamping (WILA - 13 mm) Hydraulic flat die in lower table Automatically adjustable AKAS Fiesller laser safety system

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Gjdpfx Asxlt Ebjacskc

Condition: ready for operation (used), Permanent Magnetic Conveyor Belt (unused) Brand: LKoreman Block : L= 1200 x W=850 x H=300 mm Length frame A-A = 1900 mm Beltwidth: 800 mm Driving Gear Unit 1,5 kW Speed 1.6 m/sec   Gkjdpfx Ajxnndqsacjc

Condition: ready for operation (used), Belt Conveyor LKOREMAN Brand: LKOREMAN Beltwidth: 500 mm *A-A length = 6000 mm Power : Gearbox 2 kW In stock: 1 piece *A-A length = 10000 mm Power : Drum motor 1,1 k Gkjdpfx Aasxnnctjcsc In stock: 1 piece

Condition: ready for operation (used), IFE Electro Magnetic Conveyor Belt brand: IFE Length frame A-A = 2300 mm Beltwidth: 800 mm This Magnet has 2 magnetic Blocks: *nr1= main magnetic block, type electro Dim. Block : L= 950 x W=900  x H=650  mm Gjdpfx Ajxnnc Teacjkc Power: 3,5 kW *nr2= auxiliary magnetic block, type permanent. Dim. Block : L= 550 x W=620  x H=190  mm Driving: 2 kW Gearbox Including rectifier.

Condition: ready for operation (used), Lot of Belt Conveyors, consisting of Nr1= Brand: LKOREMAN, year of manufacture 2010 A-A  length: 1000 mm, Beltwidth: 1000 mm Power : 0,2 kW Drum motor , Beltspeed: 0,4 m/s. Nr2= Brand: LKOREMAN, year of manufacture 2001 Gkjdsxnndwepfx Aacoc Curve conveyor 20°, Beltwidth: 700 mm Power : 0,37 kW gearbox , Beltspeed: 0,2 m/s.

Condition: ready for operation (used), Belt Conveyor Brand: LKOREMAN A-A  length = 7000 mm Beltwidth: 2000 mm Gedpexnncysfx Aacjkc Drive-Return Drum Ø 520 mm. Power : Stiebel Gearbox 18,5 kW Speed appr. 1,3 m/sec.

Condition: ready for operation (used), Belt Conveyor Metso Brand: Metso 2 piece on Stock: *1x A-A  length = 11.500 mm, Beltwidth: 1300 mm, Flat Version. Driving: 7,5 kW gearbox. *1x A-A  length = 20.000 mm, Beltwidth: 6500 mm. Godpjxnnc Hofx Aacjkc Driving: 7,5 kW gearbox.