Used Automation Vacum for sale (11,248)

Condition: refurbished (used), operating hours: 45,165 h, functionality: fully functional, machine/vehicle number: 131B4584, input voltage: 400 V, input current: 133 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP55, year of last overhaul: 2025, continuous power: 75 kW (101.97 HP), Exact type designation: Iedpfx Aexp H Iwjg Ueht Danfoss FC-302P75KT5E55H1XGXXXXSXXXXAXBXCXXXXDX Output power and output current: 75kW | 147A 131B4584 ° With test seal! ° Easy operation thanks to integrated control panel ° Quick parameterization possible thanks to Quick Menu ° Original operating instructions for commissioning included Only 1 unit left in stock! This item has been reset to factory settings and is therefore in its original delivery condition. Please refer to the original product images for the visual condition. Functional and ready for immediate use.

Condition: ready for operation (used), functionality: fully functional, Vacuum lifting device VacuMaster RE 100-4 with crane runway for ceiling suspension. Ihsdsx E Dq Ropfx Ag Uot Vacuum lifter and crane have been used very little and are in very good condition, see photos. DGUV certificate expired. Crane runway approx. 11 x 6 m with 10 vertical ceiling suspensions, see photo. Clear crane runway height approx. 2.8 m, ceiling height approx. 3.5 m, system is height-adjustable. Dismantling and collection in 41334 Nettetal.

Condition: new, Year of construction: 2022, Negative pressure deduster Hoecker-Polytechnik. LIKE NEW !! Technical data Normal volume flow rate 5100 m3/h Max volume flow rate 6000 m3/h Ihodpfx Agjxr Rk Us Ust Negative pressure at rated V 2700 Pa Motor power 11 kW Rated speed 3000 min-1

Condition: good (used), Year of construction: 2012, ASPIRATION POLYTECHNIK VACUMOBIL VT 160-L 1950m3/h, 2.2kW motor Can be installed in the work area (depending on dust type) Low residual dust concentration in return air < 0.1 mg/m³ (H3) according to TRGS 553 Closed air circuit, 100% utilization of thermal energy Large collection capacity with 1 mobile bin Height less than 2 m (intake mouth height center: 1.5m) Programmable control with automatic start (potential-free contact) No rupture vent required for St1 dusts IFA-certified filter media (retention rate 99.95%) Iedpexzt Stofx Ag Uoht Low energy consumption, high suction power IE3 motor, energy efficient Automatic filter bag cleaning

Year of construction: 2023, condition: used, Top condition – with warranty (without suction plates) Price: On request The all-rounder enables effortless, precise, and cost-effective handling of concrete and natural stone elements weighing up to 140 kg thanks to the integrated vacuum hose lifting technology. Suitable for kerbstones, concrete slabs, natural stone slabs, concrete paving stones, channel plates, wall stones, and more. A general product description (including photos/application videos) and technical data can be found on our Optimas website. The images are exemplary representations and not pictures of the actual products for sale. If interested, please feel free to contact us by phone or email at any time. Ijdpfow Hyt Dox Ag Uoht

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: TD2002, Schmalz Vacuum Lifter with 50kg Payload / Lifting Capacity Dimensions: 30 x 30 x 30 cm, Weight: 11 kg Equipped with 1 suction pad, approx. 150 mm diameter Ijdpsupyn Rofx Ag Uoht 1 compressed air connection Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only

Condition: like new (used), operating hours: 58 h, functionality: fully functional, input voltage: 400 V, input current: 304 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2026, continuous power: 160 kW (217.54 HP), Equipment: type plate available, Exact model designation: Danfoss FC-302N132T5E20H4BGCXXXSXXXXAXBXCXXXXDX Output power and output current: 160 kW | 315 A 134F3658 ° With test seal! ° Only 58 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Ihjdpfx Agjx U Apqj Uet Only 1 unit left in stock! The item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the visual condition. Fully functional and ready for immediate use.

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Motor: 5.5 kW Extraction capacity: 4200 m³/h Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm) Iedpfexbf Rbjx Ag Uoht

Condition: excellent (used), Year of construction: 2007, filter area: 28 m², volume flow: 6,000 m³/h, negative pressure: 2,700 Pa, intake manifold diameter: 300 mm, Sawdust extractor, dust extraction, self-cleaning filter, vacuum brand Hoecker Polytechnik Model: EA 300-7A with pneumatic cleaning of filter bags during operation Year of manufacture 2007 7.5 Kw fan Capacity 6 000 m3/h Iodpfx Aerp D Najg Ujht Filtration area 28 m2 Vacuum pressure 2700 Pa Air return Capacity of dust tanks - 495 l Equipped with automatic fire protection system Inlet diameter 300 mm Technical documentation included.

Condition: good (used), functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 900 mm, total length: 1,600 mm, Höcker Polytechnik VACUMOBIL EA 160 Self-cleaning Dust & Chip Extractor Specification: • Condition – used, after inspection Ihjdsxph Daspfx Ag Ust • Manufacturer – Höcker Polytechnik • Model – VACUMOBIL EA 160 • Turbine motor power – 3.45 kW • Filter self-cleaning mechanism • Turbine inlet – dia. 160 mm • One collection bin for dust/chips • Automatic mode for extractor start synchronised with machine • Overall dimensions – 160 x 90 x 200 cm (L x W x H) Additional information: • Good, factory technical condition • Photos show the actual condition of the item for sale • Possibility to switch on and test the device on site

Condition: new, Frequency converter Manufacturer: Danfoss FC-302P2K2T5E20H1XGXXXXSXXXXAXBXCXXXXDX Typ: VLT® AutomationDrive FC-302 (P2K2) 2.2 KW / 3.0 HP, Three phase 380 - 500 VAC, (E20) IP20 / Chassis Iodpfx Agohukxxe Usht

Condition: new, functionality: fully functional, machine/vehicle number: 131H1603, overall weight: 52 kg, total length: 660 mm, total width: 370 mm, total height: 333 mm, input voltage: 400 V, input current: 161 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, continuous power: 90 kW (122.37 HP), Equipment: type plate available, Exact type designation: Danfoss FC-302P75KT5E20H1BGXDXXSXXXXA0BXCXXXXDX Output power and output current: 90 kW | 177 A 131H1603 Iedjv Tw Umspfx Ag Usht ° NEW in original packaging! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the Quick Menu ° Original operating instructions for commissioning included Only 2 units left in stock!

Condition: new, functionality: fully functional, machine/vehicle number: 132H9037, input voltage: 400 V, input current: 204 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, continuous power: 110 kW (149.56 HP), Equipment: type plate available, Exact model designation: Danfoss FC-103N110T4E20H4XGCXXXSXXXXAQBXCXXXXD0 Output power and output current: 110 kW | 212 A 132H9037 ° NEW in original packaging! ° Formed! ° Easy operation via integrated control panel ° Quick parameterization possible ° Original operating instructions for commissioning included Only 1 unit left in stock! Iedpex Hvy Hjfx Ag Ujht

Condition: like new (used), operating hours: 3 h, functionality: fully functional, machine/vehicle number: 131H3091, input voltage: 400 V, input current: 96 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, continuous power: 55 kW (74.78 HP), Equipment: type plate available, Exact model designation: Danfoss FC-302P55KTE20H1BXXXXXSXXXXAXBXCXXXXDX Output power and output current: 55kW | 106A 131H3091 Ihjdpfx Agex Hvuwj Ujt ° With test seal! ° Only 3 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Only 1 unit left in stock! The item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the visual condition. Fully functional and ready for immediate use.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 131G9799, input voltage: 400 V, input current: 647 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, continuous power: 355 kW (482.67 HP), Exact type designation: Danfoss FC-302P355T5E54H2XGC3XXSXXXXA6BXCXXXXDX Output power and output current: 355kW | 658A 131G9799 ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Ihsdpfx Asv Hbvuog Uet Only 1 piece left in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready for immediate use.

Condition: used, Year of construction: 2010, Suction nozzle diameter: 200 mm Rated airflow: 2262 m³/h Max. airflow: 3500 m³/h Filter area: 12.65 m² Cleaning system: vibration motor Chip disposal: 2 collection containers Collection volume: 330 liters Filter material: polyester needle felt Negative pressure at nominal flow: 2750 Pa Installation: mobile Approx. weight: 450 kg Motor power: 4 kW Power connection approx.: 400 Volt/50Hz Storage location: with customer Iedpfx Agox U Egxj Usht

Condition: used, Year of construction: 2016, Available after installation of suction nozzle: left Suction nozzle diameter: 300 mm Nominal airflow: 5100 m³/h Max. airflow: 6000 m³/h Filter area: 28 m² Cleaning: pneumatic jet cleaning Extinguishing unit: powder extinguisher Chip disposal: 4 collection containers Collection volume: 495 liters Filter material: polyester needle felt Negative pressure at Vnenn: 3100 Pa Negative pressure at Vmax: 2500 Pa Installation: mobile Dimension: 3210 mm Motor power: 7.5 kW Electrical connection approx.: 400 Volt/50Hz Storage location: Ihsdjx Rdm Nspfx Ag Uet

Condition: used, Year of construction: 2017, Design of intake nozzle: right Intake nozzle diameter: 350 mm Rated air flow: 6927 m³/h Max. air flow: 8600 m³/h Filter area: 35 m² Cleaning: pneumatic – jet cleaning Extinguishing system: powder extinguisher Chip disposal: 4 collection containers Collection volume: 495 liters each Filter material: polyester needle felt Negative pressure at rated flow: 3100 Pa Negative pressure at max. flow: 2000 Pa Installation: mobile Approx. weight: 1100 kg Motor power: 15 kW Power connection approx.: 400 Volt/50Hz Storage location: Iodpfx Aox Iv S Eog Uoht

Condition: used, Year of construction: 2025, As-new demonstration unit! List price €8,200, including control panel (operator side), pressure regulating valve LR 1/2. The key design features are: galvanized steel sheet construction; space-saving due to compact design; ATEX-compliant; FSA-tested for pressure shock resistance; low energy consumption with high performance thanks to high-efficiency clean-air fan fitted with special impeller; two large-capacity collection containers with liner bags, collection volume 350 l; high operational safety and extended service life due to BGIA-tested filter bags; compressed air pulse cleaning (‘jet’ cleaning) with time-dependent control for filter surface regeneration; Alpha control system with automatic start (slide control available for a surcharge); connection cable, 5 m long, with plug; residual dust content in exhaust air below 0.1 mg/m³; passed GS-H0-14 "GS-H3" test. Suction nozzle arrangement: left. Rated air flow*: 1,447 m³/h; max. air flow: 1,900 m³/h. Negative pressure at interface (at rated air flow): 3,500 Pa; (at max. air flow): 2,700 Pa. Filter surface: 10 m². Suction nozzle: 160 mm. Motor – fan: 2.2 kW, 400 V, 50 Hz, IE3. Collection volume: approx. 350 liters. Compressed air connection: 1" (on-site). Sound pressure level: 72.0 dB(A). Dimensions (L x W x H): 1,840 x 1,020 x 1,990 mm. Location: Ihjdpfsx Hwqgsx Ag Ujt

Condition: used, Year of construction: 2025, New display machine! Powerful dust extraction unit according to DIN 8416 for the extraction of processing machines, suitable for installation in the working area outside explosive atmospheres. Key design features include: - Robust, galvanized steel sheet construction - Space-saving, compact design - Delivered ready for operation - Low energy consumption with high performance due to clean air side high-performance fan with special impeller - 2 large-volume collection containers with insert bags - Collection volume approx. 350 l - High operational safety and long service life through filters certified by the German employers' liability insurance association - Motorized filter cleaning device with automatic control and runtime addition - PLC control with automatic start (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Manufactured according to DIN 8416 - Residual dust content in the exhaust air under 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" testing Technical data: Suction nozzle arrangement: left Nominal airflow rate*: 1,450 m³/h Max. airflow rate: 1,950 m³/h Vacuum at the interface*: - at nominal airflow: 3,200 Pa - at max. airflow: 2,700 Pa Filter area: 10.3 m² Suction nozzle: 160 mm Nozzle height, approx.: 1,500 mm (centered) Fan motor: 2.20 kW, 3x400 V, 50 Hz Shaker motor: 0.12 kW, 3x400 V, 50 Hz Pre-fusing: 16 A (on-site) Sound pressure level: 73.0 dB(A) Weight, approx.: 365 kg Iodpfxex Hwp As Ag Ujht Dimensions (L x W x H): 1,648 x 1,012 x 1,990 mm * Required specification according to GS-HO-07 at 20 m/s and loaded filter bags (beech test dust). In delivery condition and under practical conditions with coarser dust, the suction performance is significantly higher. Location: Rieth

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h Iedpfx Aox I A Hpjg Ujht EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1,200 units per shift! TECHNICAL DETAILS Production capacity: 150 pcs/h MACHINE DETAILS Electrical data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Isdpfx Aox Trlrjg Ueht Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra / Thin frame machine i-3 – CE version Warm-edge spacer production system Production of Intercept ULTRA stainless steel, ThinPlate or BlackLine

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Ihjdsx Syivopfx Ag Ust Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, load capacity: 200 kg, arm reach: 2,400 mm, repeat accuracy: 0.06 mm, empty load weight: 1,155 kg, number of axes: 6, Auction of a package of 4 KUKA KR 200 robots! The machines have been fully overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload: 200 kg Arm reach: 2,400 mm Number of controlled axes: 6 Working envelope: 38.6 m³ Positional repeatability (ISO 9283): ± 0.06 mm Range of motion: A1: ±185° A2: -142° / 0° A3: -120° / 148° A4: ±350° A5: ±120° A6: ±350° Axis speeds (rated load): A1: 90 °/s A2: 85 °/s Ihjdpfx Asx Syktog Uet A3: 85 °/s A4: 117 °/s A5: 120 °/s A6: 195 °/s MACHINE DETAILS Controller model: KRC2 Weight per robot: 1,155 kg Noise level: < 75 dB Tilt angle: ± 5° Ambient temperature (operation): 10 °C to 55 °C Ambient temperature (storage/transport): -40 °C to 60 °C INCLUDED EQUIPMENT Manipulator KRC2 control cabinet Teach pendant Cable sets

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 360 kg, arm reach: 2,826 mm, controller model: KRC4, repeat accuracy: 0.08 mm, number of axes: 6, The machine has been completely overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload: 360 kg Arm reach: 2,826 mm Position repeatability (ISO 9283): ±0.08 mm Number of axes: 6 Additional load capacity max.: Rotating column: 550 kg Link arm: 130 kg Arm: 150 kg Range of motion: A1: ±185° A2: −130° / +5° A3: −110° / +162° A4: ±350° A5: ±120° A6: ±350° Iodpfx Asx Syg Ijg Usht Axis speeds (rated load): A1: 103°/s A2: 94°/s A3: 100°/s A4: 117°/s A5: 110°/s A6: 163°/s MACHINE DETAILS Control model: KRC4 Dimensions & weight Base area: 968 × 944 mm Robot weight: approx. 1,660 kg EQUIPMENT Manipulator KRC4 control cabinet Complete cable set Teach pendant