Used Automatic Screen Printing Machine for sale (78,345)

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: - Angle magazine, loading length 6000 mm. Knodpfx Ajzuymkofkoa - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, MAN Roland 704 3B Straight printing press 105 million impressions Knsdpfexvbnrsx Afkea PPL (Perfecting Plate Lock) Rolandmatic RCI (Roland Color Interface) Automatic wash-up system Powder spray coating UV dryer with 3 lamps in the delivery section 1 interdeck cylinder

Condition: used, Year of construction: 2006, Stamping Press Knedjzil S Ispfx Afksa Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Ksdpozil Suefx Afkona Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: used, functionality: fully functional, Single-deck pre-screening machine Ksdpfxowm Ndxj Afksna Screening area: approx. 1,250 x 2,000 mm Driven by two 4 kW unbalanced motors Mounted on a steel structure with discharge chute

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Manufacturer - Sorma Group. Model - PK8. Serial number - 1095. Date of manufacture - 1996. Speed - 35 packs/minute. Knodpfx Afot Evzrskja Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H.

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition Kjdodzp T Njpfx Afksna The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Kedpfx Afezquywokona Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Iwasaki LDH 200 label printing machine, machine number 1499, 2 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwinder, slitter-rewinder, working width: 20 cm, in good condition, available immediately. Iwasaki LD 200 label printing machine, machine number 1174, 3 colors, die-cutting unit, various mounting plates, UV dryer, unwinder, slitter-rewinder, in good condition, available immediately, working width: 20 cm. A total of 3 machines are available (2 Iwasaki and 1 Labelmen). Working widths: 20 cm and 18 cm. If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility after prior appointment. Ksdpsiphiksfx Afkona

Condition: good (used), Year of construction: 2001, Semi-automatic Bomar STG 330 DGH saw Knedszur Duepfx Afkoa - Cutting dimensions: 330mm x 510mm - 60-degree mitre cut - Variable cutting speed - Year of manufacture: 2001

Condition: excellent (used), Year of construction: 2021, Efi Vutek H5 Under service contract since installation in 2021. Configuration: 8 colors + w For extra 9.000€ extra we can include RIP Caldera V18 with driver and profiles and 100 liters of inks, 20 liters per colours CMYKW . (which costs 14.000€) Productivity: 109 boards per hour Under production. Knjdexanwzepfx Afkoa Price includes decommissioning and loading on truck. Pictures and videos available upon request. For further technical information, please refer to enclosed brochure.

Year of construction: 1988, condition: used, Automatic edge gilding machine Ochsner GA Knsdpfx Ajzqt Efsfkoa Year: 1988 Description: Grinding stations Regulation of grindings Brush with exhaust Priming station Gilding station Electric steering and controlling desk

Condition: ready for operation (used), Konica Minolta Accurio Press C 3080 with only 830,000 copies, in perfect condition, tested and ready to print! Equipment: FS 532 PI 502 RU 518 m PF 707 m Sd513/513f IC 605 As an experienced retailer of used copiers, we have developed considerable expertise in packing and pallet shipping, to ensure that our customers receive machines in perfect condition. We ship copiers that originate from and have been maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Knsdpsznufzefx Afksa Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Knjdpfx Aozg U R Iefkea Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar

Condition: ready for operation (used), * Brand: RN Maschinenbau Knjdpfx Ajzqdczofkoa * Surface: length 5000 mm, width 1400 mm - 2 decks * Driving: 15 kW E-motor

Condition: used, Year of construction: 2018, Konica Minolta AccurioJet KM-1 (Conversion from KM-1 to KM-1e in 2024) Approx. 9.5 million prints Printing system: LED-UV inkjet printing system with CMYK color system Resolution: 1,200 × 1,200 dpi Performance: Up to 3,000 sheets/hour (simplex) Up to 1,500 sheets/hour (duplex) Kodpfx Aozqyyvsfkena Sheet format: Max. 585 × 750 mm Min. 375 × 525 mm Printable area: Simplex: 575 × 735 mm Duplex: 575 × 730 mm Material thickness: Simplex: 0.06–0.60 mm (approx. 60–600 g/m²) Duplex: 0.06–0.45 mm (approx. 60–450 g/m²) Suitable for coated and uncoated offset papers, textured papers, cardboard, packaging materials, as well as synthetic materials and plastics. Printing without primer is possible on many substrates. Feeder and delivery stack height up to 900 mm each. Machine dimensions: approx. 5,400 × 3,000 × 2,400 mm Machine weight: approx. 9,100 kg Machine operational and available shortly. Location: Western Europe Price upon request.

Condition: used, Year of construction: 2020, Digital UV Coating and Finishing System MGI JETvarnish 3D Evo 75 Knedpfszqyrrex Afkja Maximum sheet size: 1,200 × 750 mm Processable material: 135–800 g/m² Coating unit: 135–400 g/m² Suitable for coated and uncoated papers and cardboard, pre-coated as well as laminated/cashed substrates, and suitable plastic media. Coating: Varnish High-Gloss clear coat 18-liter tank Coating layer thickness: 7–232 µm Digital UV coating finishing, partial and full-area coating, as well as 3D/relief coating effects. Machine is operational and available for immediate delivery. Location: Western Europe Price on request.

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 5, color channels: 4, resolution (max.): 2,400 dpi, number of feeding trays: 6, counter reading (black): 121,531, counter reading (color): 236,585, input voltage: 220 V, Equipment: auto duplex, Xerox PrimeLink C9070, including OCT, 1OHCF, and an external Fiery Controller running Windows 10 on an SSD. Total color page count: 236,585 Total black and white page count: 121,531 Total page count: 358,116 ⚡ High productivity with 70 color pages per minute. 🎨 Very consistent color quality thanks to the EX Fiery Controller. 📚 Suitable for brochures, flyers, business cards, posters, book covers, and direct mail. 📄 Supports heavy paper stocks up to 350 g/m². 📏 Long sheets up to 660 mm for banners and triptychs. 🔄 Large paper capacity reduces downtime during production. 🖨️ Professional workflow integration for graphic production environments. Knsdpfxezqbb Ue Afkea Are you looking for other options for this machine? We are flexible and can configure the machine to your specifications! This machine has been inspected and thoroughly tested by our own specialized technical service department. If you require further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: used, Stanzautomat für Kalender und Notizbücher / Punching Machine for Calender and Notebooks Stanzautomat / Calender - Block Punching Machine Plastograph PZ 599 Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlänge / Paper length 100 - 550mm Knodpfezuz R Dex Afkja Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punch Auslage Rüttler / Delivery Jogger Panel Operation and Controls Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Ksdezvv Sxjpfx Afksna Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: used, Year of construction: 2020, functionality: limited functionality, number of ink cartridges: 7, color channels: CMYK + Light Cyan/Magenta + Latex Optimizer, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (max.): 1,630 mm, Equipment: documentation/manual, For sale due to a new purchase (available immediately): HP Latex 365 large-format printer in excellent condition (only the drive belt needs to be replaced (defective since 18/6/2026) / price reduced accordingly). This 64" roll-to-roll latex printer has only printed 8,708 m² throughout its lifetime – a fraction of what this machine can handle. Virtually new in terms of wear and tear. The HP Latex 365 is a versatile production printer suitable for both indoor and outdoor applications. Thanks to the water-based HP Latex inks, the prints are odorless, dry instantly after production, and are GREENGUARD GOLD certified for use in sensitive environments such as healthcare facilities, schools, and offices. Technical specifications: - Print width: up to 1.63 m (64") - Ink system: 6 print heads, 7-color HP 831 (CMYK + Light Cyan/Magenta + HP Latex Optimizer) - Ink cartridges: 775 ml - Print resolution: up to 1200 × 1200 dpi - Production speed: up to 91 m²/h (max), 31 m²/h outdoor production, 17 m²/h indoor quality Knjdpfxsy Nngqo Afkja - Media handling: roll feed, take-up reel, automatic cutter - Built-in i1 spectrophotometer for automatic ICC color calibration - Control panel: 8" touchscreen - Connectivity: Gigabit Ethernet, HP Latex Mobile App supported - Suitable for: banners, self-adhesive vinyl, films, paper, wallpaper, canvas, synthetics, mesh, textiles – including porous fabrics via the included ink collector. Included: - HP Latex 365 printer - incl. Cadera 14.1 RIP with driver - Take-up reel / winding system - Ink collector kit for textile applications - Spindle, edge holders, loading accessory - User documentation and power cables - Remaining ink stock can be discussed Reason for sale: upgrading to a larger production machine. Inspection and demonstration possible by appointment. Delivery and installation assistance available in the Benelux region for a fee. Update (new price): drive belt needs to be replaced => 500 euros extra.

Condition: excellent (used), functionality: fully functional, overall weight: 154 kg, input voltage: 220 V, total width: 660 mm, total length: 1,500 mm, total height: 1,310 mm, HP DesignJet XL 3600 MFP - Total meter reading: 23,105 m2 - Includes Calibration Sheet - All-in-One model - Includes PostScript option Very high productivity thanks to fast first print and high print speed. 📐 Ideal for CAD, GIS, and architectural drawings, with sharp lines and accurate colors. 📄 Automatic roll feed with integrated catch tray for prints. 📱 Direct printing from USB, network, email, and mobile devices. Knodpfx Ajzpyfiefkja 🖥️ 15-inch touchscreen for easy operation. 🔒 Comprehensive security, including encrypted storage and network security. 📦 Suitable for large print volumes, making it popular with repro departments and technical drawing offices. This machine has been inspected and thoroughly tested by our own specialized technical service. If you would like any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the “OCE VarioPrint 6180 Titan.” Items for Sale: 1x OCE VarioPrint 6180 Titan with the following features: Includes 2x HC52 finishers Includes 3x Pims paper decks Meter readings: Total: Approx. 39,188,579 pages Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you before shipping or pickup. Kjdpfx Aszqnb Ujfkjna For more information, please feel free to contact us directly.

Condition: used, Weinig Univar 10 automatic moulding machine for profiling and milling windows and doors, individual components and similar items with circumferential profiles, including a mechanism for single-person operation Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Knjdoztv Easpfx Afkea

Condition: used, For profiling and edge-milling windows, doors, individual components and similar items with all-round profiles Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Kodpfx Afoztv Dpekona