Laminating machine

Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine

Condition: used, Year of construction: 2003, Year of manufacture: 2003 Technical specifications: 2 colors + varnishing unit Max. sheet size: 740 × 1,040 mm 159 million impressions Rolandmatic Tresu varnishing unit CCI ink remote control Fsdpfx Agjz Hnuke Tjgi IR/TL dryer Grafix Cantronic powder sprayer PPL power plate loading Automatic plate changing All washing systems Currently in production and operational Availability: available in the short term Price: upon request Location: Germany

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Fgjdjvy Aipspfx Ag Tei Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: new, Year of construction: 2018, functionality: fully functional, total length: 2,335 mm, total width: 2,180 mm, total height: 1,880 mm, Equipment: documentation/manual, Maximum paper size: 520 x 740 mm Minimum paper size: 280 x 406 mm Maximum printing area: 510 x 735 mm Equipped for cardboard Maximum printing speed: 12,000 sheets/hour The machine is in technically NEW condition. It has NOT been used for printing yet! Inspection and testing possible at any time. Fgjdpfx Age Agzhnj Toi

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 337, Kolbus DA 260 case-making machine - Device for applying inner lining with hot glue - Automatic case counter - Single case request for control purposes, initiated from the operating side - Infinitely variable drive - Safety standard compliant with CE directives and specifications Technical data: Size range of open case: min.: 205 x 140 mm max.: 670 x 390 mm Joint width: 4 – 15 mm Width between boards: 14 – 120 mm Turn-in width, closed: 8 – 15 mm Cloth: width: 223 – 708 mm height: 130 – 428 mm Boards: thickness: 1 – 4 mm Fgjdpfx Agez Hlywj Tsi width: 95 – 328 mm height: 140 – 390 mm Board center strip: thickness: 1 – 4 mm width: 6 – 90 mm Center strip roll: thickness: 0.3 – 0.6 mm width: 6 – 90 mm Inner lining dimensions, dependent on glue processing: width: 195 – 670 mm height: 130 – 390 mm Do not hesitate to contact us for more information. The machine is still in production.

Condition: used, Year of construction: 2014, operating hours: 182 h, functionality: fully functional, machine/vehicle number: 1404392, type of input current: three-phase, input voltage: 380 V, We are offering this used Autobond FL 106 X 145 laminating machine, manufactured in 2014, for sale. Fgjdozkkmmepfx Ag Tei The control system was renewed in 2020. Since then, 232,314 sheets have been processed and the machine has run for 182 hours. Unfortunately, the values before the replacement were not recorded. Machine type: FL 106 X 145 Serial number: 1404392 Rated voltage: 380/415 + N V Patent number: Year of manufacture: 2014 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1996, A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible. Fsdpox I Rprsfx Ag Togi

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Equipment: CE marking, We offer this machine in very good condition: Zhou Tai AMD650Z, a bag-making machine, manufactured in 2021. Manufacturer: Zhou Tai Model: AMD650Z Fodpfxjzy Ig As Ag Tjgi Year of manufacture: 2021 Condition: very good Type of machine: Bag-making machine If you have any questions or require further information, please send us a message or contact us by phone.

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Fodoylyhdjpfx Ag Togi Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on selecting the right belt. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: Mini 76 TH, type of input current: AC, input voltage: 400 V, working width: 760 mm, AUTOBOND MINI 76 TH automatic laminator. 2015 Model. Fully refurbished. Max sheet size: 76 x 105cm Min sheet size: SRA4. Speed: 60 m/min. 22 million impressions. Heidelberg Feeder. Fedpfx Ajzpw Izog Tsgi Tool temp YCU. Jogger delivery. Optional post heat system.

Condition: excellent (used), Year of construction: 2017, operating hours: 52 h, machine/vehicle number: 1704476, Single-sided, sheet-fed, thin-film thermal laminator for long print runs. Maximum sheet size: 106 x 106 cm (41 3/4” x 41 3/4”), Minimum sheet size: 28.5 cm x 32 cm (11.5” x 12.5”), Maximum speed: 120 m/min (394 ft/min), paper weight from 115 gsm (80 lb text) to 650 gsm (24 pt). Quick setup, easy operation, robust construction. • Heidelberg Speedmaster feed head, rising pile, back separation, stream feeder, vacuum feed table, servo-driven mechanical front-lay registration, maximum pile height 1.2 m (47”). Water-heated chrome laminating roller. Fsdpfjzudqgox Ag Togi