Used Arg 220 Plus for sale (11,807)

Condition: refurbished (used), Year of construction: 2021, operating hours: 2,804 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 927 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Bledpfx Afoz Ird Esmop Manufacturer: Jungheinrich Type: High lift pallet truck ERD 220 DrivePlus Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 2,804 Lifting height: 2,010 mm Mast type: Duplex Free lift: No Overall height: 1,400 mm Fork length: 1,200 mm Unladen weight: 927 kg Load center: 600 mm Tires: Polyurethane Model type: ERD 220 DrivePlus Battery type: PzS Voltage: 24 V Battery weight: 390 kg

Condition: good (used), Polar Mohr 115 XT Plus Paper Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg Blsdpfxo Af E Hus Afmjp 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Bodj Af E H Uspfx Afmolp Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, For sale: a drilling and milling machine from Alzmetall. Type: Plus 3 DG. Inspection and test run possible at any time. Bljdpfx Afszk U Dpomop Forklift available for loading.

Condition: new, Year of construction: 2025, Bending machine press brake from Prod-Masz with side cutouts for bending from top to bottom. Thanks to him, you can finish your windowsill. In the machine construction there is a space of 6 cm up and down for curved processing. It is a modern sheet metal bending machine that bends sheet metal from three sides. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Transport wheels incl. We are looking forward to your contact! Bedpecntm Ajfx Afmelp

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Bjdpfs Ahg I Ejx Afmolp Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: used, mileage: 275,000 km, first registration: 06/2019, fuel type: diesel, overall weight: 11,990 kg, fuel: diesel, gearing type: automatic, emission class: euro6, Equipment: air conditioning, Box van with retractable hydraulic tail lift, rear roller shutter door, 275,000 km, automatic transmission, air conditioning, electric windows, radio, central locking, rear air suspension. Price listed above plus 22% VAT + registration fees. Blodpfx Afjz Eq Iqemep

Condition: excellent (used), Year of construction: 1993, Technical specifications: Manufacturer: Striebig Bodpfx Afjiwlz Ajmslp Year of manufacture: 9/1993 Type: Standard II Plus 5220A Feed: manual Design: automatically adjusting aluminum slat bed Saw carriage locking: manual Lowering of saw unit: manual Swivel adjustment 0 to 90°: manual Motor power: 4.4 kW Cutting range: 4600 × 2200 × 60 mm Speed: 5250 rpm Saw blade diameter: 300 mm Space required: L × H × W 5700 × 3000 × 1400 Condition: very good Location: warehouse Saw blade: 1 piece Can be loaded onto a truck using a forklift on site. Delivery and assembly possible by arrangement.

Condition: excellent (used), mileage: 22,400 km, power: 162 kW (220.26 HP), first registration: 08/2021, fuel type: diesel, wheelbase: 3,350 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, power assisted steering, power mirror, trailer coupling, = Additional Options and Accessories = - 3rd hydraulic valve - 4th hydraulic valve - Front windscreen - Speed limiter - Cabin - Air suspension - PTO (Power Take-Off) - Sun visor - Toolbox - Towing hitch = Further Information = General Information Intended use: Construction Technical Information Number of cylinders: 6 Engine displacement: 6,728 cc Unladen weight: 6,220 kg Functional Lifting capacity: 1,760 kg Lifting height: 1,000 cm Number of hydraulic valves: 4 Crane: PALFINGER PK 7.001K SLD3, year of manufacture 2021, mounted behind the cabin Body manufacturer: Meiller Pump: Yes Condition Technical condition: very good Visual condition: very good EURO 6 | PACKAGE | 220 HP DRIVE 4X2 WHEELBASE 335 CM LEAF / AIR SUSPENSION DAY CAB WITH AIR CONDITIONING AUTOMATIC TRANSMISSION TOOLBOX TIPPER MEILLER METAL FLOOR, THREE-WAY TIPPER Bledpfx Afsxay Acjmep LARGE AND SMALL TRAILER COUPLING PALFINGER PK 7.001K SLD 3 TEC7 CRANE CRANE OPERATING HOURS: 1,280 3X HYDRAULIC EXTENSIONS 2X OUTRIGGERS ADDITIONAL CRANE FUNCTIONS 5 AND 6 MAXIMUM WORKING HEIGHT: 10 M MAXIMUM LIFTING CAPACITY AT 3 M: 1,760 KG MAXIMUM LIFTING CAPACITY AT 10 M: 840 KG OIL COOLER FOR CRANE HYDRAULICS

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 Bledpfx Aewi Sulefmop diameter range: 8,5-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Blodpfjz Slk Ajx Afmsp Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 6497, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 7 m/min, actuation type: manual, total height: 1,300 mm, total length: 3,100 mm, total width: 1,320 mm, overall weight: 550 kg, Equipment: CE marking, documentation/manual, Hebrock edge banding machine, model top 2000 plus, edge banding machine with hot-melt adhesive application to the workpiece for edge material up to 3 mm. High-frequency miter saw station (flush miter station), angled table rollers, automatic edge transport, stepless electronically adjustable temperature display with LED actual value display, protective cover, - Pneumatic miter station for edge thickness up to 3 mm (pre-cutting of the edge material) Bljdpfx Ao Agakqjfmjp - High-frequency combination flush trimming station with interchangeable blade cutter - Surface scraper blade (without pneumatic extraction device) min. workpiece width 90 mm, workpiece thickness 10 - 45 mm, min. workpiece length 260 mm, max. edge material height 50 mm, extraction nozzle D = 100 mm, compressed air connection min. 7 bar Weight approx. 550 kg as inspected, ex works Seevetal, excluding transport, subject to prior sale

Condition: refurbished (used), Year of construction: 2018, operating hours: 5,357 h, load capacity: 2,000 kg, lifting height: 2,900 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 1,430 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 996 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide transport & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: High-lift pallet truck ERD 220 drive PLUS Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2018 Blsdpfxoy Rpkao Afmep Operating hours: 5,357 Lifting height: 2,900 mm Mast type: Triplex Free lift: Yes Initial lift: Yes Overall width: 700 mm Overall height: 1,430 mm Fork length: 1,200 mm Unladen weight: 996 kg Load center: 600 mm Tires: Polyurethane Model type: ERD 220 drive PLUS Battery type: PzS Voltage: 24 V Battery weight: 368 kg Charger: Not included

Condition: used, mileage: 391,200 km, power: 160 kW (217.54 HP), first registration: 04/2011, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 6,100 mm, total width: 2,450 mm, total height: 2,650 mm, Equipment: ABS, central locking, Iveco 220 hp German vehicle Three-way tipper 2 x tow hitch Bsde Afrfkjpfx Afmjlp We can arrange for a new TÜV inspection for an additional fee.

Year of construction: 1996, condition: good (used), functionality: fully functional, 2 Buckets, 1 7 finger grapple Good working order Blsdpfx Afe Aglzkomop Chains and sprockets 60%

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Tumbling machine, Rühle MKR-220, year of manufacture 2019. For sale is a Rühle MKR-220 tumbling machine, factory refurbished in 2019, in very good and fully functional condition. The machine operates on 400 volts, 4.5 kW, 16A, and is made entirely of stainless steel. Workshop inspected. Further information available upon request. Payment in cash or by prepayment. Bjde Ad Hc Iopfx Afmolp Sale only to commercial businesses. No guarantee, no warranty.

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Bedpfo Aguyzox Afmelp Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: ready for operation (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Blsdpfxo Afdmae Afmop Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030 515 428, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Main spindle speed: 50–12,000 rpm Spindle mount: BT 40, JIS B 6339 Big+ Tool magazine capacity: 120 tool positions Preparation for tool magazine capacity: 240 tool positions Pallet changer: 2 pallets Pallet storage: 6 pallets Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar Coolant pressure: switchable in 3 stages Coolant pump output: 5.5 kW Coolant flow rate: 17 l/min at 70 bar Coolant pressure: 70 bar External coolant pump: 100 l/min at 1.4 bar Filter capacity: approx. 250 l/min Dimensions of the coolant system (L × W × H): approx. 2,200 × 1,500 × 2,250 mm EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Tool magazine with 120 tool positions, prepared for 240 tool positions Tool changer with 31 tool positions Loading and setup station 2 spiral chip conveyors KNOLL coolant system with scraper conveyor and lift pump Coolant pump KTS25-50 for coolant supply through the spindle External coolant pump Coolant shower Precision NC rotary table instead of the indexing table Direct measuring system and control extension for the B-axis CE marking Tool breakage monitoring Automatic tool length correction Rotating viewing window Blsdpfj Afhlajx Afmsp Note: The machine has already been dismantled.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Bjdpfx Aj Ahhdpofmelp Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, stroke length: 200 mm, throat depth: 400 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table height: 900 mm, oil tank capacity: 350 l, overall weight: 16,950 kg, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, clearance between the columns: 3,820 mm, distance table to ram: 400 mm, ram plate length: 4,270 mm, table length: 4,270 mm, table width: 120 mm, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Bljdpfjz Eqwlox Afmep Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: MMZO 903 706, Model: Prima Plus Amrys, Machine No.: MMZO 903 706, Year of Manufacture: 2004, 9 stations, Length approx. 22 m as shown in the picture without any other items shown in the picture Note: If technical or electronic devices are included in the item, their functionality has not been tested. Note: Pallets are included in the item if shown in the picture. This Müller Martini Prima Plus Amrys gathering machine will be auctioned online in our industrial auction / machine auction entitled “Closing of a well-known printing company: printing machines, extensive printing machine accessories, production technology, spare parts, conveying technology, workshop and operating equipment, as well as storage and office furniture.” You can find this and many other items from the fields of machinery, printing machine accessories, and production equipment on our platform. Bjdpfx Afe Ahrw Hsmolp

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis Mitutoyo Crysta-Plus M7106 was manufactured in 2017. It features a measuring range of 700 x 1,000 x 600 mm and is in near-mint condition with very low operating hours. The machine includes a Renishaw probe head and is regularly serviced. If you are looking to get high-quality 3D measurement capabilities, consider the Mitutoyo Crysta-Plus M7106 gantry robot we have for sale. Contact us for further details. - Measuring Range (X / Y / Z): 700 x 1,000 x 600 mm- Operating Hours: Very low (rarely used)- Technical Condition: Near-mint / Exceptionally good condition- Measuring Range (X / Y / Z): 700 x 1000 x 600 mm- Maximum Spatial Diagonal Tested: Up to 1515 mm- Controller Type: UD1- Software Version: MCOSMOS-1 v4.2R1- Probe Head: Renishaw MH20i- Probe: Renishaw TP20- Probe Module: Standard Force (SF)- Stylus Configuration: Length 20 mm, Stylus ball diameter 3.9924 mm- Maximum Permissible Length Measurement Error (EL, MPE): 4.5 + 4.5 * L/1000 µm (where L is in mm)- Single Stylus Form Error (.1x25:SS:Tact): 3.6 µm (MPE: 4.5 µm)- Last Calibration Date: 04.04.2023 Bedpe Agwwvjfx Afmslp

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg Bledoz Dtbwjpfx Afmsp The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: used, Year of construction: 2006, - Brand: Multitel / Mercedes-Benz - Type: 220 ALU / Sprinter - Year of construction: 2006 - Hours: 7425 hours - Kilometre reading: 145506 km. - Weight : 3360 kg. - Drive: Diesel - Working height: 22 meters - Lateral reach: 11 meters - Lifting capacity: 200 kg. - Dutch license plate - Export license plate possible - APK: 28 Aerial work platform book available - Maintenance history available - CE document available Bsdpfe Acklqjx Afmelp - Video on our website - Trade-in and transport possible * Brand: Multitel / Mercedes-Benz *Type: 220 ALU / Sprinter * Construction year: 2006 * Hours: 7425 uur * Km. position: 145,506 km. * Weight: 3360 kg. * Working height: 22 meters * Lateral reach: 11 meters * APK: 28 * Drive: Diesel * Lifting capacity: 200 kg.