Used Angle Transfer for sale (9,770)

Condition: good (used), Welding frame size: 650 x 500 mm Bdedpfx Aeixttyebbek

Condition: good (used), The Trans-Blot Turbo transfer system combines traditional blotting techniques with modern filter paper and buffers, allowing rapid transfer of proteins from gels to membranes with minimal preparation time. The system integrates a high amperage power supply that directs current between a built-in platinized titanium anode and a stainless steel cathode. This enables highly efficient and rapid transfer in as little as 3 minutes. The entire system is in a ready-to-use format that allows researchers to obtain their results faster and easier, with reproducibility that is difficult to achieve using traditional blotting methods. Rapid transfer — transfers mini or midi gels in as little as 3 min High throughput — can transfer 1–4 mini or 1–2 midi gels in a single run Bodpfx Asxzd E Djbbodk Greater transfer efficiency — higher transfer efficiency compared to other transfer methods Flexible design — allows user to customize transfer conditions and is compatible with traditional semi-dry consumables Environmentally friendly — environmentally safe consumables eliminate disposal cost Good working condition. Please check out our other listings as well.

Condition: excellent (used), Motor-driven rotary shift table Bjdpfx Aboif Rlbobjdk Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M08L/9039, Offer Number: M08L/9039 Machinetype: 6 die - 6 blow transfer header Info: bushing cut-off Make: Carlo Salvi Type: 663/TR Constr. year: 2007 diameter range: 2-5 mm number of dies: 6 number of stations (incl. cut off): 7 cutting length: 35 mm shaft length under head: 25 mm Bedpfx Aew N Dl Uobbjdk output - pieces/min: 400 dimensions: 12x35 press power: 15 to Location: In our warehouse

Condition: used, mileage: 507,645 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, first registration: 01/2013, emission class: euro5, color: white, number of seats: 23, Equipment: ABS, air conditioning, parking heater, General Engine: Mercedes-Benz AdBlue Emission standard: EURO 5 Total seats: 23 Seats: 22+1 high/fixed Transmission: Manual gearbox Bdodpfx Absxgk Ezsbok Safety * ABS, ASR, EBS Passenger compartment * Auxiliary heater * Air conditioning * Luggage shelves * Driver microphone Audio, Communication, Electronics * Radio / CD Exterior * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Driver's door * Roof hatches * Roof fans * Roof ventilators Other * German registration document * Twin tyres * Vehicle length: 7.66 m * Vehicle width: 1.99 m * Vehicle height: 2.86 m * Front axle tyres approx. 30% * Rear axle tyres approx. 30% Our internal vehicle number: 11825 Errors excepted. Images and text may differ from the actual vehicle. Constantly over 300 vehicles available.

Year of construction: 2000, condition: excellent (used), Kaltenbach / APS CNC Flat Bar / Angle Punching / Shearing Line – Year 2000. Bodpfeirakrox Abbodk 500mm Capacity Flat Bar. 60mm x 160mm Angle. 3 head Punch. Horizontal punch. 12 metres Gripper feed. Mitre Shearing.

Condition: good (used), Format 500x500mm Bdodpfx Abjgt Unkebek

Condition: used, Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur Gearbox Type: 1FT6064-1AF71-3EG1 Serial No.: YF P921 8717 07 001 Year of manufacture: 2002 Rated torque = MO: 7.9/9.5 Nm Rated current = Io: 5.0/6.1 A Max speed = n. max.: 4550 rpm ALPHA Angular Gearbox Bdsdsxciw Uspfx Abbok Type: PKF 160-MF2-18-031-000 Article code: 20026113 Gear ratio 18:1 (Gearbox input = 18 revolutions, gearbox output = 1 revolution) Hollow shaft outer diameter 68 mm Hollow shaft inner diameter 55 mm Shaft stub length 50 mm Centering diameter 140 mm Housing dimensions L/W/H 650 x 160 x 195 mm Weight: approx. 50 kg Good condition Removed from a fully functional custom machine, tested prior to removal.

Condition: used, _____ Description: Year of manuf. : 2018 Control : Fanuc 30i-B In General: Year of construction:2018 Control system:Fanuc Processing stations:5 pieces Loading station:1 piece Travelling range: X-axis:450 mm Y-axis:500 mm Z-axis:450 mm Rapid traverse X/Y/Z:50 m/min Turret: Number of stations:8 Speed:13,300 rpm Torque:58 Nm Tool holder:HSK 63 C Workpiece/device: Dimensions max.:350 x 350 x 350 mm Max. permissible mass:250 kg Bdodevr Az Nspfx Abbsk Media supply line:6 pieces NC swivelling rotary table: A-axis:+/- 150° B-axis:360° Max. load:250 kg Table diameter:320 mm Equipment: Loading/unloading:Fanuc Robot M20i-A Chip removal:2x chip conveyors Coolant supply:IKZ system, 20 bar Position measuring systems:Direct in all axes

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08E/9059, Offer Number: M08E/9059 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: KIESERLING Bodpfxoxlr I Ij Abbsdk Type: K55 Constr. year: 1979/2002 diameter range: 8-22 mm number of dies: 5 number of stations (incl. cut off): 6 output - pieces/min: 105 shaft length under head: 6-140 mm cutting length: 175 mm press power: 250 to Location: Europe

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Offered is an Urschel COMITROL Processor Model 3600 Slant. Slant processor. Complete with steel frame and tank. Never used. Year of manufacture: 2020. Bjdpfx Abexl R Efebodk

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Bdsdpfxjvkphgo Abbjk Air capacity m2 / hour 250

Condition: good (used), Format: 500x500mm Bdodegt Uplspfx Abbsk

Condition: used, Vertical milling head, milling head, angle milling head WMW HECKERT Year of manufacture: approx. 1985 Tool holder: SK 40 Quill stroke: approx. 85 mm Centre diameter at the flange plate: 200 mm Bolt circle diameter at the flange plate: Ø 175 mm Mounting threads at the flange plate: 4x M16 - Head drive with splined shaft - SK40 adapter for head drive via splined shaft Bdjdpfx Aboxcbp Ajbjk - Degree scale on the angle milling head 2x 90° - Draw bolt for tool holder with M16 - Solid intermediate flange for adapting to a WMW FW 250x1000 milling machine Dimensions L x W x H: 530 x 380 x 240 mm Total weight: 95 kg In good condition

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Bdodpfx Abow Si T Aobok Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 600 x 320 mm -T groove width: 12mm -T grooves: 5 pieces -Equipment: rotatable, pivotable, tiltable -Foot mount: 325 x 190 mm -Number: 1x tables available -Price per piece -Dimensions: 800/300/H240 mm Bjdpfxodfv Ikj Abbedk -Weight: 70kg

Condition: excellent (used), Leg length: 1015 mm Bdjdpfegzvuqjx Abbek Stop leg length: 650 mm Material thickness: 15 mm Weight: 17 kg

Condition: good (used), Year of construction: 2005, Year of manufacture: 2005 Condition: functional Bsdpfxsudydgs Abbedk Model:Schulze Air press x Double pneumatic transfer press, semi-automatic model. The print can be adjusted using an air gauge, which also ensures the same pressure regardless of the quality of the garment. Digital temperature and time control. Automatically opens when the transfer is finished. Bottom plates are available in different sizes. - Print size: 400 x 500 - Dimensions: 1.67 x 0.74 x 0.98 m - Weight (including packaging): 170 kg - Power: 10 A / 230 V - Temperature: max. 220 °C - Temperature accuracy: ± 0.5% - Power: 2.4 kW - Heating time: 12 min. at 180 °C - Timer range: max. 9 min., 59 sec. - Operating pressure: 2490 kg

Condition: used, Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Bdedpfxexmb Rhe Abbok Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/9030, Offer Number: M08L/9030 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: SCHULER Bdsdpfx Ajxgt N Nobbsk Type: GB15-5 Constr. year: 1988 diameter range: 8-18 mm number of dies: 5 number of stations (incl. cut off): 6 shaft length under head: 120 mm cutting length: 140 mm output - pieces/min: 60-170 press power: 100 to Location: In our warehouse

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Bedpfx Aei Igdfobbodk Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: good (used), Spare part for grinder, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder -Clamping angle: for tool grinding machine Bdjdpfskahkcsx Abbjk -Type: unfortunately without type designation -Details: see photos -Dimensions: 150/150/H215 mm -Weight: 8.2 kg

Condition: used, table clamping surface: 228 x 273 mm 3 T-slots: 12 mm Bedpfx Abjbbgcxjbedk in between 4 x 4 threaded holes: M 8 table height at zero position: 146 mm Space requirement: 250 x 290 mm Weight: 41 kg

Year of construction: 2009, condition: excellent (used), MASS NC steep conveyor, angle conveyor Angle conveyor belt with substructure Conveyor belt length: 1,500mm flat + 1500mm rising. Dropping height: approx. 1400mmmm. Description: available immediately, Ready to ship more pieces Belt speed: 7m/min T 30 studs Welded stud height 30 mm Drive: 0.37 kw 380V 50Hz Height-adjustable angle conveyor belt with adjustable angles Feed part 1500 mm Riser section 1500 mm Usable width 850 mm Stud height 30 mm Belt speed: 7m/min Standard control with emergency stop/stop button External width 950 mm (without motor) PU strap color green L studs Stud spacing approx. 450 mm Stud height 30 mm Standard control with emergency stop/stop button Bjdpspby Ursfx Abbodk mobile on steerable stop rollers Lateral collecting plates in the feed section

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Bodpfjh Ellzsx Abbedk Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54