Used Amada Turret Punch for sale (225)

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) Nljdpfx Ajw Iq Ugoa Eek - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: new, Saw band dimensions: 4570 x 34 x 1.1 mm Tooth pitch: 3/4 Nljdolkdqrjpfx Aa Esk

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic press brake Fab. AMADA Typ. HFP 50-20 Year 2005 Technical data Make: AMADA Type: HFP 50-20 Year of construction: 2005 Effective length: 2090 mm Capacity: 50 t Passage upright: 1,665 mm Stroke: 200 mm Projection: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Equipment Nljdpfjtzcxpox Aa Esk - Controlled axles: Y1, Y2, X, R, Z1, Z2 - FIESSLER light barrier at the front - Amada upper tool clamping - CNC control 3D AMNC graphics - Rear safety guard (hinged mesh doors) - Swivel operation - front left - Tools: o Upper tool straight, R 0.8mm, H 117mm, length 2,000 mm o Bottom tool V10/88°, length 2,000 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), total width: 3,000 mm, pressing force: 100 t, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Nedpfx Aovwcduoa Eelk Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: HFE 3i 1003 L | 101075, control type: CNC control, Condition and details, see pictures. The machine is currently being sold without tools. Nlsdoxfg U Njpfx Aa Ejk

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 60,120 h, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Amada, laser type: CO₂ laser, laser source manufacturer: FANUC AF 4000 E, laser hours: 60,120 h, laser power: 40,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, working length: 3,050 mm, working width: 1,620 mm, working height: 380 mm, repeat accuracy: 0.1 mm, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, 4kw, CO2, Fanuc, new turbine in 2025 & vacuum pump. Everyday at work. Automation LKI MP 300 Nlsdpfsxa Dxuox Aa Ejk

Year of construction: 2013, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3270 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 100 mm WORKING AREA: 3070 x 1550 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: AJ2000 Fiber ; 2000 W CONTROL UNIT: AMADA AMNC3i Nodpovhc S Hjfx Aa Eolk WEIGHT: 11200 Kg OVERALL DIMENSIONS: 10028 x 2900 x 2000 mm NOTE: WITH LOADING/UNLOADING SYSTEM LKI 3015FLC-AJ YOM 2013; AUTOMATIC NOZZLE CHANGE

Condition: used, Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller Nledpogal Avefx Aa Esk -Saw band roll: made from metal saw Amada HA-400 W -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm -Quantity: 1 piece available -Weight: 51kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 12,800 h, machine/vehicle number: 45561238, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser hours: 12,800 h, laser power: 2,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, power: 2 kW (2.72 HP), type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, Working area 2520×1550×300 mm Table load 330 kg Ball-screw drives Nsdpfoxgmnfsx Aa Eelk Machine dims 5745×2630×2789 mm Weight 7.5 t Selling due to buying a new, identical one

Condition: good (used), Year of construction: 2003, Amada HFP 100-3L (long stroke) 8-axis press brake Year: 2003 Tonnage: 100 tons Max. Bending length: 3110 mm Standard stroke: 350 mm Approach speed: 100 mm/sec Bending speed: 10 mm/sec Return speed: 100 mm/sec Weight: 7100 kg Dimensions Machine length: 4498 mm Machine width: 2450 mm Beam width: 60 mm Distance between side frames: 2705 mm Machine height: 2860 mm Open height: 620 mm CNC control type: AMNC Display: Touchscreen Akas laser protection Controlled axes: 8 axes, Y1, Y2, X1, X2, R1, R2, Z1, Z2 Documentation available Digipro angle measuring system Supplied with 1 set of tools Nledpfjvn S I Djx Aa Eok

Condition: used, Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled back stop up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Nodjtx E E Ispfx Aa Eelk Light barriers for the rear area Replacement blades Weight approx. 9000 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 0010713, Offer 25105 Technical data: - Max. working width: 3050 mm - Max. cutting capacity: - for steel sheet: 6.35 mm - for stainless steel: 4 mm Njdpewtnw Defx Aa Eslk - for aluminum: 8 mm - Adjustable cutting angle - Number of hydraulic hold-downs: 14 pcs - Backgauge with AMADA position control: 10 – 1000 mm - Front angle stop + support arm - Stroke rate: 12 – 26 strokes/min - Pneumatic connection - Drive: 400 V / 5.5 kW - Table height: approx. 860 mm - Required space incl. backgauge, without front support arms: approx. W 3800 x H 1950 x D 2300 mm - Weight: approx. 6500 kg - Equipped with: - Electric foot switch - Sheet support - Cutting length adjustment - Cutting line illumination

Year of construction: 2004, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3420 mm Y-AXIS TRAVEL: 1550 mm Nodevhc Tdjpfx Aa Eolk Z-AXIS TRAVEL: 200 mm RAPID FEEDS X-Y-Z: 80 - 80 - 60 m/min MAX CUTTING THICKNESS: STEEL 22mm; INOX 12mm; ALUMINIUM 9 mm WORKING AREA: 3070 x 1550 x 200 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: FANUC C4000 E ; 4000 W CONTROL UNIT: FANUC 160 iLB WEIGHT: 15500 Kg NOTE: DOUBLE STORAGE TOWER LKI UL300FO TWIN year 2004; SUCTION AND FILTERING UNIT TORIT; COOLING UNIT MTA 201

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg Nlodpfx Aajgag Ahe Eok

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Nledpfx Aepy Uzyja Esk Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, Year of construction: 2008, Equipment: CE marking, lower tooling, safety light barrier, upper tooling, AMADA HFE2204 Pressbrake Nledpfow I Dmcex Aa Esk Pressforce: 220t Bending length: 4m Backuage: 4-axis backgauge system Clamping system: Amada

Condition: used, Year of construction: 2011, The Amada HFE m2 2204 is a modern and sophisticated sheet metal processing machine specifically designed for the requirements of industrial manufacturing. It combines precise control technology with a user-friendly interface to enable efficient and more accurate processing of sheet metal materials. Key Features: - Hydraulic pressing force: With a pressing force of up to 220 tons, the HFE m2 2204 offers the performance required for demanding applications. - Versatility: The machine is capable of processing a wide range of materials, including steel, stainless steel and aluminum, making it suitable for different manufacturing processes. - Precision: Thanks to advanced technologies, the HFE m2 2204 ensures high dimensional accuracy and repeatability, resulting in minimal scrap rates. - User-friendly control: With an intuitive control panel and advanced software, the machine allows easy programming and adaptation to different production requirements. - Safety features: The HFE m2 2204 is equipped with various safety features that ensure the protection of the operator and the safe operation of the machine. Overall, the Amada HFE m2 2204 is a reliable choice for companies that need a powerful and precise sheet metal processing solution. Its advanced features and ability to customize make it a valuable investment in modern manufacturing processes. Ink. Tool Pressing force: 2,200 KN Folding: 4280 mm table width: 180 mm distance between the posts: 3760 mm Throat: 420 mm opening: 470 mm stroke: 200 mm working height: 960 mm amount of oil: 160 L. connected load: 20 kW approach speed: 100 mm / s Maximum bending speed: 10 mm / s return speed: 100 mm / s total length (L): 5655 mm total width (B): 2620 mm total height (H): 3080 mm Total weight: 17t operating hours: 5500 Total weight: 17t return speed: 100 mm / s total length (L): 5655 mm total width (B): 2620 mm total height (H): 3080 mm table width: 180 mm distance between the posts: 3760 mm Throat: 420 mm opening: 470 mm stroke: 200 mm working height: 960 mm amount of oil: 160 L. connected load: 20 kW approach speed: 100 mm / s Maximum bending speed: 10 mm / s Nlsdpfxevyq Uye Aa Esk

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Nlsdpfx Aewq Dpqja Eok Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Nljdpfxoxfknao Aa Esk

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Your Maschinen Besmann Team We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Nedjw Eiprepfx Aa Eslk Motor power: 5,5 KW Weight: approx. 3300 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 4,135 h, saw band length: 5,300 mm, table height: 740 mm, overall weight: 3,500 kg, coolant pump power: 1,500 W, saw drive: 5,500 W, Saw from the year of production 2019 / post-show saw - first launch in 2021. Saw in very good technical and visual condition. Nledpfx Aouiu Siea Ejk Technical parameters in the photo above. Price without rollover.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 90 mm, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, pressing force: 60 t, type of input current: three-phase, power: 5.5 kW (7.48 HP), compressed air connection: 5 bar, warranty duration: 5 months, input voltage: 200 V, year of last overhaul: 2021, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm Nsdpfx Aju Haqhoa Eolk bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw machine weight: 6350 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Nledpfevncifjx Aa Eek Weight: 4950kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 150 t, compressed air connection: 6 bar, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AMADA Type: TP-150C-X2 Pressure: 150t Year of manufacture: 1986 Stroke length: 175mm Distance above table: (adjustable) 230-330mm Nlodpfx Aasu Dw U So Eok Table size: 1250x750mm Bear size: 700x550mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Net weight: 16326kg Automatic greasing system. Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, saw band length: 3,660 mm, overall weight: 1,300 kg, cutting height (max.): 300 mm, table length: 400 mm, in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Nlodpfx Aaowvvr Io Eok Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m