Used Amada Ha 500 for sale (199)

Condition: good (used), functionality: fully functional, Year of construction: 2006, stroke length: 200 mm, overall weight: 11,600 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 2,850 mm, input voltage: 400 V, pressing force: 170 t, clearance between the columns: 2,700 mm, distance table to ram: 350 mm, table length: 3,100 mm, type of input current: three-phase, Equipment: documentation/manual, safety light barrier, Amada HFP 170/3 CNC press brake | 2006 | AMNC-PC | Wila clamping system Machine specifications Manufacturer: Amada Model: HFP 170/3 Year of manufacture: 2006 Condition: used, in good working order Control system: Amada AMNC-PC Tool clamping system: Wila Included: 1 set of tools Dimensions: approximately 4,500 × 2,000 × 2,850 mm Machine weight: approximately 11,500 kg Podpfoz S Nuqjx Akisrc Location: Waanrode, Belgium Description Amada HFP 170/3 CNC press brake from 2006, equipped with AMNC-PC control and a Wila tool clamping system. The machine is used but still in good working order. One set of tools is included with the sale. The machine is being sold due to the purchase of a larger press brake. Transportation can be arranged upon consultation. The machine is stored in Liège but can be inspected while powered on.

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 Pedpeyk D Dtjfx Akisrc CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Condition: used, control type: CNC control, degree of automation: automatic, bending force (max.): 170 t, stroke length: 30 mm, overall weight: 10,500 kg, AMADA Promecam HFB Press Brake — 1700 kN / 3000 mm For sale: Heavy-duty hydraulic press brake for industrial use, in very good working condition. Machine details: Manufacturer: Amada Promecam (France) Model: HFB Year of manufacture: 1991 Technical specifications: Prjdpfx Asywr R Aokijc Press force: 1700 kN (170 tons) Maximum stroke: 130 mm Input voltage: 380 V / 50 Hz, 3-phase Installed power: 13 kW Nominal current: 27 A Weight: 10,500 kg Control system: Delem DA 58 graphical CNC controller Additional information: The machine is equipped with a full air bending capacity chart mounted directly on the machine body. Tooling included. This press brake has been in regular production use and is in full working order. For further information and inquiries, please contact us by email or phone. Available for collection by arrangement.

Condition: ready for operation (used), Year of construction: 2009, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 620 mm stroke 350 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec oil volume 280 L 0 300 bar controlled axis 7 Anzahl Number of working hours ca. 51.500 h total power requirement 16.5 KW weight of the machine ca. 12700 kg range L-W-H 4550 x 2650 x 3150 mm Prjdpfx Ajzz S D Ijkisc "LONG STROKE" special version Excellent condition (!!) Original price approx. 200.000 Euro Special price on request ----- "LONG STROKE" electro-hydraulic press brake featuring: * Increased daylight opening (installation height) = 620 mm * Increased cylinder stroke = 350 mm ----- Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control "AMNC" - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) * Swiveling control unit - front left * Touchscreen control panel * Tool & program library * Incl. handheld control unit for manual axis movement - CNC-controlled backgauge adjustment (X1+X2) * Adjustment range .. 700 mm * Adjustment speed .. 500 mm/sec. - CNC-controlled vertical adjustment of gauge fingers (R-axis) * Adjustment range .. 250 mm * Adjustment speed .. 160 mm/sec. - CNC-controlled left-right adjustment of gauge fingers (Z1+Z2) * Adjustment speed .. 1000 mm/sec. - AMADA manual upper tool clamping system * Type: WILSON TOOLS Express * Vertical tool loading/unloading possible * Incl. 1x set of sectional ROLLERI upper tools * "TOP 175.60.R2" ... H 143.8 + 30 mm / 60 degrees - AMADA lower tool holder * Incl. sectional / reversible 4V die * V-openings: 16/32/35/50 mm - FIESSLER laser safety system (front of machine) * Motorized adjustment * Model series: "AKAS III 150" - Side safety guards (swinging doors) - Rear safety guard (swinging door) - 1x movable dual foot pedal - Front emergency stop button - Original operating manual

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS Pjdpfx Ajz Sva Hekijrc - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: ready for operation (used), Year of construction: 2008, Available immediately ex-works: CNC press brake AMADA Type HFT 80 - 25 Year of manufacture 2008 Touchscreen control Pressing force 80 tons Working length 2570 mm Distance between uprights 2125 mm Overhang 420 mm Approach speed 100 mm/s Working speed 10 mm/s Retraction speed 100 mm/s Stroke 200 mm Overhang 420 mm Prsdpfx Ae Afcmxekioc Drive power 9 kW Weight 5750 kg Complete set of tooling Price: EUR 19,500.00 plus VAT, ex-works.

Condition: good (used), functionality: fully functional, overall weight: 7,500 kg, total length: 4,000 mm, total width: 2,000 mm, total height: 2,800 mm, FOR SALE: Amada HFB 125/30 Press Brake Available for purchase: a true industry workhorse, the Amada HFB 125/30. Known for its exceptional precision and reliability, this machine has been well-maintained and is ready for demanding production environments. Technical Specifications: Press Capacity: 125 tons Bending Length: 3000 mm Year of Manufacture: approx. 2001 Controller: Operateur CNC (multi-axis control) Pjdpfjy Athyjx Akijrc Stroke Length: 200 mm Open Height: 450 mm Key Features: Precise and efficient down-stroking operation. Versatile multi-axis backgauge for complex setups. Rigid frame design ensuring consistent angles across the full length. Well-maintained and in full working order.

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Table height 960 mm Prodpfxoyym Hkj Akioc Open Height 370 mm Throat Depth 100 mm

Condition: excellent (used), Year of construction: 1998, TYPE BRIDGE FRAME HYDRAULIC CAPACITY 20 TONS CONTROL FANUC SERIES 18P TURRET 31 STATION THICK TYPE 3 AUTO-INDEX STATIONS 19 X A 6 X B 1 X C 2 X D Prsdo Affmnopfx Akioc AUTO INDEX STATIONS 2 X B 1 X C MAX TRAVERSE (WORKING AREA) 1270 X 1270 MAX SHEET SIZE ( WITH ONE REPOSITION) 1270 X 2540 MAX SIMULTANEOUS SPEED 82 METRES PER MINUTE MAX SHEET WEIGHT 75KG MAX SHEET THICKNESS 3.2MS MAX HIT RATE 1000 HITS PER MINUTE TABLE BRUSH TYPE WEIGHT 9.8 TONS COMPLETE WITH CHILLER NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 axis simultaneous Tape Code ... EIA or ISO (Automatic recognition) Programming Mode ... Absolute / incremental Min. Input ... 0.01 mm (0.010) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 digit T Function ... T - 3 digit M Function ... M - 3 digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb Max. No. Of Programs ... 191 Display ... 9" Colour LCD Machine Operation ... Memory or tape Punch Interface ... RS 232 C

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 100 h, Equipment: type plate available, Amada GS II 630 EVO sheet metal shear model year 2018, Working width 3050mm, max sheet thickness steel 40-45kg/mm2/6.35mm Max. sheet thickness stainless steel 60kg/mm2/4mm, aluminum max. sheet thickness 30kg/mm2/8mm. Accessories Side guide front stop beam 1m, Front stop beam 1m 2pcs, Standard lever stop 2pcs, Ball support 1.5m 3pcs. Cutting quantity 15,000 times. Pump operating hours 100h. Very little used Predpfx Aeziviwjkioc

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,574 h, punching force: 20 t, total height: 2,082 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, overall weight: 13,000 kg, controller manufacturer: AMADA, controller model: AMNC-F, product length (max.): 4,165 mm, This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information. • Turret type: 51-station turret • Maximum workpiece size: 1270 × 5000 mm • Maximum sheet thickness: 3.2 mm (mild steel) • Maximum sheet weight: 50 kg (feed speed F1); 150 kg (feed speed F4) • Position deviation: ±0.1 mm • Strokes per minute: Punching (5 mm pitch, X-axis) 350; Nibbling (5 mm pitch, Y-axis) 260 • Maximum stroke length: 42 mm • Maximum feed speed: X 80 m/min; Y 60 m/min • Turret indexing speed: 30 per minute • Electrical connection power: 19 kVA • Compressed air consumption: 500 l/min • Operating air pressure: 5 bar Additional equipment Pedoz Apf Ejpfx Akiorc • Loading system MP 250 included

Condition: good (used), Year of construction: 2006, operating hours: 47,962 h, functionality: fully functional, type of input current: three-phase, overall weight: 18,000 kg, input current: 40 A, input frequency: 55 Hz, input voltage: 380 V, Equipment: safety light barrier, We are selling: a well-maintained Amada punching and nibbling machine, used only for thin sheet metal applications. Maintenance was performed by AMADA. Without tooling. The machine is being sold due to a new investment. The buyer must dismantle and collect the machine in DE-84051 Mettenbach. The machine can be inspected in operational condition in DE-84051 Mettenbach by appointment. Sale only to commercial customers and with the exclusion of any warranty! Podpfx Aksz R Atqsiorc

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. Predpfxjy Sbu Hs Akisc At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder Prsdpfxsxvitvj Akisc manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Prsdpfx Ajyz Scgekijc Dimensions Machine Depth 6400 mm

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: C 97 12 06, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,050 mm, overall weight: 6,500 kg, number of support arms: 2, Equipment: angle stop, Hydraulic shear – AMADA, GPX 630 model. Cutting length: 3100 mm x 6 mm, fully CNC controlled. Adjustable blade angle and blade gap, set by the computer after entering the material thickness and length. Sheet metal cutting range: 0.4 - 6 mm. CNC back gauge with a travel distance of 10 - 1050 mm, retraction, and programmable. Machine with automatic support for long sheets of cut metal at the rear. Raising and lowering rear back gauge. Machine weight: 6.5 tons. 2 supports and a square bar at the front of the machine. The shear is regularly serviced. The machine has been used sporadically for the past 10 years. Service documentation and the machine manual are available. Podpjzdzkcefx Akiorc If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 16,381 h, Used AMADA press brake Model: HFT 130-4 Capacity: 4000 x 130T Number of axes: 4 Y1 Y2 X and R AMADA automatic table crowning CNC: CD2000 Axes retrofitted with new drive units New safety light curtains along entire length Fast working speed (laser): 100 mm/sec Psdpsykyuzsfx Akisrc Clearance between uprights: 3,760 mm Total length: 5,480 mm Depth: 3,000 mm Height: 2,900 mm Weight: 11.5 tonnes Machine videos available on request.

Condition: excellent (used), Year of construction: 2011, Model Amada HFE M2 103t x 3110 3m, 4 axis Press Brake Year 2011 Pjdpfxeyym Hwj Akierc Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours Podpfxeum R T So Akiorc - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Condition: good (used), functionality: fully functional, Year of construction: 2006, AMADA HFT 50-20 – Technical Specifications AMADA HFT 50-20 Specification Details Manufacturer: AMADA Model: HFT 50-20 Year of Manufacture: 2006 Condition: Used Machine Type: CNC Hydraulic Press Brake CNC Control: AMADA CD2005 Pressing Force: 50 t Maximum Bending Length: 2,085 mm Distance Between Frames: 2,665 mm Throat Depth: 420 mm Stroke: 200 mm Number of Controlled Axes: 4 Installation Height: 470 mm Working Speed: 1–10 mm/s Return Speed: 1–100 mm/s Motor Power: 6 kW Maximum Hydraulic Pressure: 270 bar Oil Capacity: 55 l Rear Back Gauge: Type A Table Width: 60 mm Table Height: 960 mm Power Supply: 400 V / 50 Hz Overall Dimensions (L × W × H): 2,950 × 1,580 × 2,450 mm Width incl. Control Panel: 1,820 mm Machine Weight: 4,850 kg Prsde Abn A Rspfx Akioc AMADA HFT 50-20, 2006. Bending length 2080 mm (50 t), 4 controlled axes, stroke 200 mm and weight approximately 4.85 tons.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber skid table CT no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 watt laser power AJ fiber laser Principle: flying optic 3-axis direct drive (X/Y/Z) oil shot function Including sensor cutting head Including lens quick-change system Including cutting lens 150, 190, 190 AX mm Including NC gas control Including NC focus control Including clean cut, high-pressure cutting Including aluminum cut function Including air purge system Including safety according to CE Including shuttle table PCLCG3015 Year of manufacture 04/2014 Predjycf N Ijpfx Akijc

Condition: excellent (used), Year of construction: 2014, operating hours: 443 h, Model Amada HFE MK2 80 x 2500 , 4 axis Hydraulic Downstroking Press Brake VERY LOW HOURS 443 Year 2014 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Pjdpfxszmtqaj Akijrc Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: ready for operation (used), Year of construction: 1999, pressure 80.0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec stroke 200 mm dayligth 470 mm table height 960 mm Number of working hours ~ 33.100 h oil volume 90.0 l total power requirement 9.0 KW weight of the machine ca. 5750 kg. range L-W-H 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - ?v=SskqZJdQxsQ ?v=KcKjibwWAKI Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) Pedpfjyyc Dfjx Akisrc - CE marking - Original operating instructions * Further technical data : Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 R axis .. 0.1 Z axis .. 1.0

Condition: used, Year of construction: 2016, Amada M2 RI 3015 for sale Low hours Full service completed with Amada 4Kw Resonator Dust extraction Chiller Compressor Latest Amada touch screen control Erwin Sick perimeter guards Head clean system Really good machine.pplease feel free to contact me if you have any additional questions open this machine. Podpfszh E Hvox Akierc Thankyou for taking time to look at this CO2 laser with rotary system

Condition: excellent (used), Year of construction: 1996, CUTTING LENGTH 3050MM POWER BACK GAUGE 1000MM PNEUMATIC SHEET SUPPORTS SIDE GUAGE 1.0 METRE SERIAL NUMBER HOLD DOWN HYDRAULIC BLADE GAP ADJUSTMENT STANDARD Podpfx As Af Iy Aekiorc VARIABLE RAKE STANDARD SHADOW LINE LIGHT STANDARD CENTRALISED LUBRICATION STANDARD SHADOW LINE LIGHT STANDARD STROKE COUNTER STANDARD ADJUSTABLE STROKE STANDARD MAX THICKNESS MS 6 MM MS MAX THICKNESS STAINLESS 4 MM SS