Used Allrounder 170 Cmd for sale (2,871)

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE20 belongs to the series of our electrically powered high-pressure machines with a pressure of 170 to 500 bar and a flow rate of 16 to 45 l/min. The standard version has solid rubber tires with a parking brake at the rear and swivel casters at the front. The “Slim version” has a narrower design and also narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal components with all-round side frames made of stainless steel. The standard model has dimensions of 1060 x 760 mm. The "Slim" version has a very compact size of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE20-200-38 CE20-280-26 CE20-350-23 CE20-400-20 CE20-500-16 60 Hz and others, see datasheet and available upon request. General specifications: ----- Power of the drive motor: 15 kW (50Hz) / 15 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 28A (50Hz) - 26A (60Hz) Cgodpfx Aehf Nbdjfqew Dimensions: 950 mm x 720 mm x 800 mm Dimensions SLIM: 950 mm x 500 mm x 800 mm Weight: 175 kg Including standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a flow rate of 16 to 46 l/min. The machine features pneumatic tires with a parking brake on the rear axle and steering rollers on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal parts with continuous side frames made of stainless steel. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with an electric starter. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CP22-170 170 bar 46 lpm CP22-220 220 bar 36 lpm CP22-280 280 bar 27 lpm CP22-350 350 bar 23 lpm CP22-500 500 bar 16 lpm General specifications: ----- Drive motor: 2-cylinder, 4-stroke gasoline engine, electric start Drive motor power: 16.4 kW Drive motor speed: 3600 rpm Optional: with manual throttle Tank: 28 L Max. fuel consumption: 6.8 L/h Dimensions and weight: Codpohga U Aefx Afqjgw Standard: 1100mm x 750mm x 1080 mm (160 kg) Standard with tires: 1100mm x 1050mm x 1080 mm (170 kg) 400l version: 1300mm x 1120mm x 1250 mm (250 kg) 800l version: 1300mm x 1490mm x 1250 mm (280 kg) Includes standard accessories.

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) Cgodpfx Aoyxdwdjfqjw • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: new, functionality: fully functional, mileage: 20 km, power: 123 kW (167.23 HP), first registration: 05/2026, fuel type: diesel, empty load weight: 2,500 kg, maximum load weight: 1,000 kg, overall weight: 3,500 kg, tire size: 225/65r16, wheelbase: 4,215 mm, next inspection (TÜV): 05/2028, fuel: diesel, fuel tank capacity: 80 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 25 m³, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, immobilizer system, lane keeping assist, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, second-hand vehicle warranty, soot filter, spoiler, start-stop system, summer tires, tire pressure monitoring, traction control, truck registration, EU-compliant vehicle with warranty. Box van Cargo area length: 4500 mm Cargo area width: 2200 mm Cargo area height: 2300 mm Number of Euro pallet spaces: 10 Cgjdpfx Afeiuxcwsqew Wheelbase: 4215 mm Sliding tarpaulin, left side Payload: approx. 1000 kg Cab heater Cruise control Air conditioning On-board computer 105-liter fuel tank Wooden floor Electric windows Central locking with remote control Turn signals in exterior mirrors Extended exterior mirrors Reinforced suspension Water tank with soap dispenser Toolbox Spare wheel - Available in approximately 2-3 weeks. - Delivery, leasing, or financing options available. - Contact: Auto-Wardenga Irenäus Wardenga, also available on WhatsApp.

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Cgsdpfx Afeytd Spsqew Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: excellent (used), Year of construction: 2001, Manufacturer: LVD Type: PPEB 170/42 Year: 2001 Serial number: 27755 Codpfx Afjy Sk R Doqogw Maximum pressing force: 170t Bending length: 5m Number of axes: 4

Condition: ready for operation (used), Year of construction: 1981, Round cutting area: 170 mm Rectangular cutting area: 170 x 170 mm Saw blade dimensions: 3000 x 25 x 0.9 mm Blade speeds: 150, 355, and 95 m/min Saw drive: 380 V, 0.75 kW Codjwuryrspfx Afqsgw Space required: 1400 x 600 x 800 mm Weight: 340 kg

Condition: good (used), Bezel, steady rest, lynette -Bezel: max. opening Ø 170 mm -Centre height: 325 mm Cgodpfxew A Ni To Afqsw -Support: ball bearing -technical drawing: in the photos -Dimensions: 520/260/H590 mm -Weight: 77 kg

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm Cgodpfx Ajp Audqofqow DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm Csdporxtpdsfx Afqogw INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Cjdog R Sh Aopfx Afqjgw Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Cedpfx Afoyztageqsgw Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 2020, condition: ready for operation (used), A complete Reisner refrigeration system including water tank, dry cooler and condenser is available. Version: split version, refrigerant: R513A, tank volume: approx. 3m³, cooling capacity: 170kW, medium: water, medium temperature inlet/outlet: 14°C/10°C, condenser recooling capacity: 230kW, dry cooler recooling capacity: approx. 170kW. Condenser dimensions X/Y/Z: approx. 4450mm/2250mm/1500mm, dry cooler dimensions X/Y/Z: approx. 7050mm/1600mm/1950mm. Documentation available. An on-site inspection is possible. Cgjdpfx Afey Hvqloqow

Condition: ready for operation (used), Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 470 mm Cgsdpfxjxabgps Afqow stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Condition: used, Year of construction: 2005, - Brand: Niftylift - Type: 170 HP - Year built: 2005 - Hours: No hour counter - Weight: 1900 kg. - Dutch license plate: WP-NZ-46 - Battery 24 Volt - Batteries: 22 Built-in battery charger - New safety inspection possible - Aerial work platform book available - CE document available - From 1st owner - Video on our website - Trade-in and transport possible * Brand: Niftylift *Type: 170 HE * Hours: No hours counter Aerial work platform book: Yes CE document: Yes Video on website: Yes * Construction year: 2005 * Weight: 1900 kg. * Dutch license plate: WP-NZ-46 Cedpfxoyxhugs Afqogw * Batteries: 22

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used punching and shearing machine from Peddinghaus Cgsdpfx Aex Iicwefqow Model: Peddimaster 110/170 Punching capacity: 110 tons Shearing capacity: 170 tons Includes side stop and various tools

Condition: good (used), Year of construction: 2002, Nette gebruikte kantbank van Safan Type CNCL K 170 3100 TS1 Safan TS1 besturing Capaciteit 3100 x 170 ton Codpfjwz I Ekex Afqogw Y1, Y2, X, R, Z1 en Z2 CNC gestuurd CNC Bombering Wila New Standard gereedschapsklemming

Condition: ready for operation (used), Year of construction: 1997, clamping force: 31,500 kN, screw diameter: 155 mm, injection weight: 9,642 g, total height: 4,090 mm, overall weight: 190,000 kg, product length (max.): 14,760 mm, This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us. • Mounting plate (H x V): 3,230 x 2,780 • Clear opening (H x V): 2,250 x 1,800 • Opening stroke: 2,100 min. • Opening width: 4,100 mm • Stroke volume: 13,205 cm³ • Injection pressure: 1,636 bar • Screw L/D: 23 • Nozzle radius: 25 mm • Immersion depth: 50 mm • Three core pulleys on the fixed side • four core pulleys on the moving side • twelve pneumatic cascades. Codpsx Sz Erofx Afqjgw

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A Cgodpjydnigefx Afqow • Heating fuse: 63 A

Condition: good (used), Year of construction: 2006, operating hours: 81,912 h, functionality: fully functional, machine/vehicle number: 202150, clamping force: 180 kN, For sale is an Arburg injection molding machine, model 170U 180-70. The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2006 Operating hours: 81,912 h Cylinder diameter: 18 mm Clamping force: 180 kN Needle shut-off: Pneumatic Internal pressure sensor Cgodpfx Ajyxm Thofqjw Transport and loading can be arranged Europe-wide at additional cost upon request. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production needs? Or do you wish to sell your own? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 211 10 017, functionality: fully functional, operating hours: 1,415 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 450 mm, saw blade diameter: 550 mm, height adjustment type: mechanical, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 2,900 rpm, total length: 7,075 mm, total width: 1,350 mm, total height: 1,992 mm, overall weight: 2,700 kg, table height: 850 mm, year of last overhaul: 2026, cutting length (max.): 5,200 mm, compressed air connection: 6 bar, extraction nozzle diameter: 160 mm, hole diameter of the disc: 80 mm, table width: 950 mm, working height: 850 mm, Equipment: CE marking, documentation/manual, saw blade guard, The FLS technology with a floating unit represents a modern and versatile method for the longitudinal splitting and formatting of materials, placing a strong emphasis on production flexibility. This proven technology enhances yield, work productivity, and maintains the quality of wood material with particular attention to the cleanliness of the cut. FLS circular saws are characterized by a high level of safety and straightforward operation. Cgjdeubbubopfx Afqew The saw offered above features premium equipment compared to the standard configuration. This includes, for example, clamps on the sliding back pusher, an automatic workpiece ripping mode, two joysticks, and more. Further details available upon request.

Condition: used, mileage: 197,000 km, power: 177 kW (240.65 HP), first registration: 05/2009, fuel type: diesel, overall weight: 13,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: mechanical, Year of construction: 2009, Equipment: ABS, air conditioning, crane, MAN TGM 13.240 / 4x4 HUBARBEITSBUHNE + CRANE + REMOTE CONTROL Imported / Accident-FREE Codpfezbwqujx Afqegw IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 197 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? POWER STEERING ? Immobiliser ? TACHOGRAPH CAPACITY: kg TOTAL WEIGHT: 13 000kg WHEELBASE: 365 cm TIRE SIZE: 365/80R20 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: COMILEV EN 170 TPC + REMOTE CONTROL maximum reach : 17m ( VERTICAL) , 8,30m ( HORIZONTAL ) OPERATION OF THE LIFT FROM THE BASKET AND GROUND LEVEL BASKET LOADABLE UP TO : 265kg TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 29426

Condition: used, Year of construction: 1992, Cutting length 4200mm Electrical guide Digital display Laser line Cgjdpfx Afjyf Emlsqjw 11kW saw motor 380V Sold as is without inspection

Year of construction: 2006, condition: excellent (used), The device is in working order and was only used for testing purposes. A funnel is included. Csdpfjh Im Eqsx Afqsgw

Condition: new, functionality: fully functional, machine/vehicle number: NEW-17, empty load weight: 635 kg, maximum load weight: 2,835 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,680 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MG 306 170 3500 2 – Machine Transporter NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 40cm Total weight: 3500kg Payload: 2825kg Braked tandem axle trailer Overrun brake and handbrake from AL-KO Largest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30cm steel side panels 15mm thick, non-slip and robust screen-printed wood floor Automatic jockey wheel with 400kg support load 12 lashing eyes with 1000kg tensile force, also on the front Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pole connector Side marker lights at the front Rear lights with reversing light, NSL (number plate light), and triangular reflectors Steel ramps with eccentric locking system, 2800kg capacity Adjustable rear supports Walkable steel fenders OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Superstructure and fenders painted to customer specifications -Black Edition: superstructure and fenders painted black -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Force One diamond plate floor and 4x diamond plate steps -Grille between ramps -Shovel rack -Height-adjustable drawbar with DIN towing eye -Rear bulkhead Further accessories available on request! Plus freight to Gera and vehicle registration document 250 € net Images are for illustrative purposes and may show optional accessories that incur additional costs. Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, also for caravans. In addition, we have a large selection of spare parts and accessories, including trailers from various manufacturers. Csdpoghpb Dsfx Afqegw You can find a wide range of rental trailers with us. Visit us online or come directly!