Used Ahwi Forestry for sale (127)

Condition: used, mileage: 73,000 km, power: 81 kW (110.13 HP), first registration: 01/1995, overall weight: 2,800 kg, fuel type: gasoline, color: red, next inspection (TÜV): 02/2027, gearing type: mechanical, emission class: euro1, Year of construction: 1994, total length: 4,655 mm, total width: 1,840 mm, total height: 1,940 mm, number of seats: 7, Equipment: all wheel drive, parking heater, 1st hand. Well-maintained German fire service vehicle. Registered continuously by the first owner from 1995 to 2025 and kept in a heated garage. Now available for purchase from us. A classic vehicle appraisal for a potential historic registration (H-registration) as an oldtimer was successfully completed in 2025. Technical inspection (TÜV) valid until 02/2027. New brakes in 2025 (invoice available). Syncro all-wheel drive. Cedovn Dfnopfx Afnsgn 7 seats fitted (9 seats are legally registered and technically permitted overall). Power steering. Electrically adjustable exterior mirrors. Radio. Originally registered in the factory-issued registration documents as "Passenger Car, Closed Estate, S-ARM 93/59/EWG 1." With this, the vehicle would be granted a green environmental sticker today. The vehicle type was changed on 28.12.1994, prior to first registration on 05.01.1995, to "Other Vehicle, Fire Engine Equipment Transporter (GW)," and the T4 has been registered as such for the entire 30 years. This van can continue to operate as a service vehicle for many years due to its good condition. 2.5-liter petrol engine. Five-cylinder with catalytic converter (engine code ACU). Last service in August 2024 at 71,985 kilometers (invoice available). 5-speed manual gearbox. Top speed 159 km/h. Towbar with 1,700 kg towing capacity (up to 2,000 kg possible with a maximum train weight of 4,500 kg). Auxiliary heater. Spare wheel mounted on the tailgate. Sliding door on the right. Front internally ventilated disc brakes and reinforced stabilizer bar. Additional upper rear indicators. Wheelbase 2,920 mm (short and low version). Reinforced 120 A alternator. Auxiliary battery under driver’s seat. Good winter tires (with legally required "snowflake symbol"), VREDESTEIN, DOT 2015. Emergency warning system with front flashers. The T4 was driven a long distance on the motorway to us without any issues. Runs reliably and is immediately available. This offer is valid only for commercial customers, freelancers, farmers, forestry operators, similar self-employed professions, as well as public authorities, emergency services, and similar entities. Unfortunately, a sale to private end consumers is excluded. Subject to prior sale and errors at any time.

Year of construction: 2025, condition: new, machine/vehicle number: 747924113, Dipperfox SC600 - the new standard for urban greening. The Dipperfox product family is growing with the new addition - the baby Dipperfox, called SC600. As an original, the Dipperfox 850 Pro is the world's most effective stump removal machine for large excavators, for use in construction and forestry. Our SC600 model carries the performance, but can be be adapted for smaller carriers. The DF600 is a tool for people in cities, municipalities, arborists, and gardens - Where full size crawler excavators are too big to use. The main advantages compared to conventional stump grinders are safety, noise level and efficiency. Because Dipperfox's rotation speed is a maximum of 60 RMP, there are no flying debris and if the blade hits the rock, it is simply pushed away. No need to create large Safety zones to get the job done. And as a true member of the Dipperfox family, the SC600 does Cgodpfx Afelqak Donon does the same job, but much faster compared to vertical grinders. It can also be used to work up to half a meter below the ground. It is very useful when you need to plant a new tree in the same same place where the original stump was located. Dipperfox SC600 is a multi-carrier tool suitable for the following: * Backhoes between 6 and 14t * Backhoe loaders from 6t * Skid steer loaders and compact track loaders from 6t * Hydraulic pressure 170-280 bar and 65-150 l/min Further information Equipment: shears, Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: new, Equipment: crane, Immediately Available Stock Cranes! Your contact for wood transport: PAVIC Company The TajfunLIV 155ZK represents the new generation of timber loading cranes, capable of handling significantly higher loads thanks to the linkage system on the jib. Additionally, the crane’s operating speed is exceptionally fast, providing experienced drivers with exactly what they demand. Available as seat-mounted, high-seat, or optionally as a cabin-mounted crane. Configurable according to your needs and available with various equipment options depending on crane type and variant: * Hydraulically adjustable cabin with electric air conditioning, diesel auxiliary heater, and radio * Proportional control valves * Folding safety roof * Heated seat * Radio remote control * Support for long timber * Grapple holder on the jib * Swing-out stabilizers * etc. Tajfun Liv is a European company based in our neighboring country Slovenia, specializing in the production of timber loaders and recycling cranes. The product range includes loaders for off-road, on-road, recycling, forestry winches, bulk material and timber grapples. Forty years of experience guarantee reliable and high-quality products. Only components from reputable European suppliers are used. PAVIC is the general importer for Germany, offering you the benefits of maximum flexibility and competitive pricing. Of course, we can also provide the suitable short timber superstructure, or even mount your new TajfunLIV loading crane on your supplied truck chassis. We are also able to offer just the installation and commissioning of a TajfunLIV crane on your existing vehicle at a fair price. Cedsxnnwdopfx Afnegn Simply contact us and receive your individual offer. If you have any further questions, our sales team will be happy to assist you.

Condition: excellent (used), Year of construction: 2019, operating hours: 3,631 h, color: green, total height: 3,400 mm, total length: 6,850 mm, total width: 2,860 mm, mobility: mobile, General Information Year of Manufacture: 2019 Applications: Forestry and Land Management Technical Information Power: 441 kW (600 HP) Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Drive: Track Unladen weight: 26,700 kg Codpfx Afow Eu Aqenogn Functional CE marking: yes Condition Technical condition: very good Visual condition: very good

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Further information New: No Cgedpfxjvy Tvto Afnen

Condition: used, maximum load weight: 4,600 kg, overall weight: 6,000 kg, axle configuration: 2 axles, first registration: 12/2023, Year of construction: 2023, Equipment: crane, We are offering here an unused forestry trailer with crane suitable for tractors from 70 HP upwards. The trailer is equipped with an overrun brake and can be operated at speeds up to 25 km/h without registration. Cgedpfx Afjx Ia Svsnsn

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Cgjdpfetw Szaex Afnon Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: new, power: 54 kW (73.42 HP), fuel type: diesel, color: other, Year of construction: 2025, operating hours: 6 h, Equipment: air conditioning, General information Year of manufacture: 2025 Technical information Number of cylinders: 4 Engine capacity: 3.319 cc Steering: skid steer Engine type: Yanmar 4TNV98CT Empty weight: 5.150 kg Dimensions (LxBxH): 379 x 205 x 210 cm Functional Quick coupler system: Yes Cjdpexpu D Tsfx Afnegn CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage V / Tier IV final Condition CE type: CE Incl. new Cangini Forestry muclher, Highflow, Hydraulic quick-change, 2-speed, CE

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: Art-Nr. M7360/SerienNr: 1943064P, For sale is a Posch PackFix with hydraulic swivel table. It has been used only a little and is in impeccable condition. The machine is equipped with its own drive system, featuring a BRIGGS&STRATTON petrol engine. Csdpfsxzq Nisx Afnegn

Year of construction: 2024, operating hours: 375 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2334006P, For sale is a well-used stationary Posch K 540. It is powered by a PTO shaft. For an additional charge or by agreement, a stationary diesel engine with 120 hp (approx. 5.5 l per hour) can be included. Maximum diameter is 55 cm, log length is adjustable from 25 cm to 50 cm. Splitting force is 35 tons. Conversion to electric motor is possible. The price includes approximately 30 guide bars and 60 saw chains (some new and some used). The splitting wedge is an 18, diameter 25. Csdpfoxzqy Uex Afnsgn

Condition: new, empty load weight: 4,400 kg, maximum load weight: 11,600 kg, overall weight: 16,000 kg, axle configuration: 2 axles, suspension: air, tire size: 550/45R22,5, wheelbase: 1,200 mm, Equipment: ABS, additional headlights, fog lights, Steindl Palfinger forestry trailer 16 tonnes | Articulated drawbar with 2 cylinders, gearbox support foot, | 10 stanchion holders welded to the outside of the frame, 4 pairs of stanchions, | LED Stvo lighting system | Tires 550/45-22.5, FLAP-DOWN | Extendable frame, HEXAGONAL FRAME | 4 drum brakes o350mm for 8-hole rim - swing arms with wheelbase 1.20m | Pneumatic brake system with 2 Tristop cylinders and 2 diaphragm cylinders including wheel chocks, | License plate lighting and type approval 25 km/h | Bottom hitch | Support load: 2,000kg Errors, input and advance sales reserved. Steindl Palfinger forestry crane L | Standard equipment 9.5m RW including 4.5 tonnes flange rotator | 4-tab load sling (EPS-LINK), EPSILON crane column | Swivel mechanism with 4 swivel cylinders 2-circuit hydraulics CAN-BUS joystick control with 2 x 4-way control blocks electrically proportionally controlled including high stand, tarpaulin and high pressure filter, including BSZ plus an AUTEC radio remote control Hydraulic oil tank with 100 litres of hydraulic oil Hydraulic oil cooler with thermostat control Lifting cylinder protection Forestry package: Chainsaw, canister and sapling holder Headlight kit with 2x LED (1000 lumens) 2-rotary piston pump with console for universal joint drive and hydraulic oil 2x40 lt/600 rpm including screwed flange universal joint shaft Wood grapple with opening width 157 cm (0.30 m2), with flange rotator, reinforced version Cgjdpsrm S D Esfx Afnsn

Condition: used, first registration: 06/1988, color: green, gearing type: mechanical, Year of construction: 1988, Mileage: 4,000 miles Drive: All-wheel drive Cjdpfx Aev H Ucnefnjgn

Condition: good (used), functionality: fully functional, overall weight: 22,000 kg, Year of construction: 1992, operating hours: 13,300 h, machine/vehicle number: EC2304140, Akerman EC230 Excavator Volvo Engine Fitted with forestry equipment Pre-equipped for hydraulic breaker or accessories Cedpfx Asxb Dmnofnsgn Sold with 4 buckets and a hydraulic breaker Track pad width: 75 cm Overall good condition Track width: 3.10 m Contact by phone in French or by email in your language

Condition: new, The ZSH chipper series is specially designed for forestry, horticultural and municipal operations. Mainly these chippers are used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. Csdpfoghgi Eex Afnogn The wood chips produced are suitable for combustion in wood chip heating systems with screw conveyors or also as a preliminary stage in pellet production. The machines are robust, reliable, easy to operate, powerful and produce wood chips of consistent quality and size. Other Low-cost solution for the production of wood chips l Compact design l User-friendly l Low energy consumption

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction Cedjfn Tu Tspfx Afnsgn ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...]

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. Cjdpsfn Tvhefx Afnsgn ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: new, HAW4000 hydraulic winch without valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, civil engineering and many other applications. HAW4000 hydraulic attached winch can make many applications easier for you. Maximum rope capacity at 4000 kg pull 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force 90 m at 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg tensile force 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg tractive force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope Cjdsfn Tviopfx Afnjgn ⦁ In viticulture, agriculture, forestry and horticulture. ⦁ In building construction, civil engineering and road construction. ⦁ Pulling out rootstocks and trees ⦁ As an attachment winch on backhoe cranes and excavators ⦁ As winch for tractors, work machines and grape harvesters A robust steel construction with 3-sided bolt-on option (left, right, rear) with M 16 threaded holes. This allows many possibilities for attaching the winch. (Threads are cut and painted. They must be recut before use due to rust protection). Large lubricatable pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak. ⦁ Oil flow rate up to 200 l/min short time max.240 l/min. ⦁ Maximum tractive force 4000 kg. ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color red The winch can be installed in different positions. There is an optional hydraulic brake. Depending on what pulling speeds and pulling forces you need, we can gladly offer you different options. Contact us, we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet 970 mm ⦁ Front width: 200 mm ⦁ Width rear: 300 mm ⦁ Width bearing: + 50 mm ⦁ Width motor: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Cjdpjdf Ud Sjfx Afnjgn Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine:

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic mounting winch you can simplify many applications: -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Cgodpfx Afsdf Ufdensn Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendant length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine: + 200 mm Height: 250 mm The winch is there to the

Condition: new, Hydraulic cable winch HAW4000 with electric valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW4000 hydraulic mounted cable winch you can make many applications easier. Maximum cable capacity at 4000 kg tractive force 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg tractive force 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg traction force 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg traction force 150 m with 6 mm plastic rope. Cgjdpfx Asfn Tvkjfnen Maximum rope capacity with 2000 kg traction force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibility (left, right, rear) with M 16 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min short-term max.240 l/min ⦁ Maximum tractive force 4000 kg ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color [...]

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Cgededf Ufpspfx Afnjn length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Cjdpjupiapofx Afnsgn Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure Cgedouph Uxepfx Afnen You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, tractors, viticulture, horticulture and many other applications. With the hydraulic winch you can make many applications easier. - Pull the firewood to the log splitter and set it up - pull logs on trailers Cjdpfx Afedf Ua Rjnjgn - Pull out rootstocks and trees - As an attachment winch on back cranes and small excavators - As winch for small tractors and narrow track tractors A robust steel construction with 3-sided screwing possibility (left, right, back) with 12 threaded holes, this offers many possibilities for fastening the winch (threads are cut and painted. They have to be re-cut with a tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 ccm (standard = 400 ccm). Depending on which speed and traction you need. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg rope speed: 47 m/min at 60 L/min hydraulic oil Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm width front: 120 mm Width rear: 180 mm bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm Item number: HAW1700 NOTE: Figure 1 is marked with m

Condition: new, Hydraulic cable winch HAW3000 with electric valve for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. You can make many applications easier with the HAW3000 hydraulic winch. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters Csdpfx Afofn Tvfsnogn A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 125 l/min ⦁ Gewic [...]