Used Agie Evolution for sale (145)

Condition: ready for operation (used), Agie Power module, output PMO-01 B 613.930.7, used, minor signs of wear, 100% functional. Bsdpfx Acsi D Txuo Toll

Condition: ready for operation (used), Agie Power module output PMO-02 B 614.030.5, used, minor signs of wear, 100% functional. Blodpsi D Tx Asfx Ac Tol

Condition: ready for operation (used), AGIE PRD-01 C Process Regulator Device 613890.3, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bljdpfxei D Tx Uj Ac Tel

Condition: ready for operation (used), Agie process regulator device PRD-10 B 614.130.3, used, minimal signs of wear, 100% functional. Bljdpji D Tyksfx Ac Tel

Condition: ready for operation (used), Agie STB-06 A1 signal terminal block, part number 621802.8, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Blodpfx Acei D Tyno Tjl

Condition: ready for operation (used), Agie VCB-01A video controller board, part number 629793.1, used, with minor signs of wear, 100% functional, scope of delivery as shown in the photos. Blsdpfx Aei D Tyvec Tol

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Bsdpfx Aezr D Dnec Tsll

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Bedpfoi A I Hfsx Ac Toll Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2014 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Bledpfxozgt N Ao Ac Tol Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG-V generator with power module AGIEVISION control system Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and completely overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer you on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Bjdpfxjzgt Ixj Ac Tsll Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 350 mm Travel range, Y-axis: 220 mm Travel range, Z-axis: 220 mm Maximum workpiece dimensions: 1,000 × 550 × 220 mm Maximum workpiece weight: 750 kg Maximum taper: ±45° / 220 mm Standard taper: 30° Wire diameter: 0.1–0.3 mm Cutting speed: 300 mm²/min MACHINE DETAILS CNC control: PC-based multi-processor control Accuracy and surface finish Surface roughness Ra: min. 0.22 µm Measuring resolution: 0.05 µm EQUIPMENT Windows XP Bjdpezlnrcsfx Ac Tell Touchscreen

Condition: repair required (used), Year of construction: 1987, EDM sinking machine, manufacturer AGIE, type: EMT 1.20, year of manufacture: 1987. Travel ranges: X 250 mm, Y 160 mm, Z 200 mm with R3 adjustable head. Bjdpsix Nqhjfx Ac Tell Further details can be found in the data sheet.

Year of construction: 1988, condition: used, Manufacturer: ONA Electro-Erosion, S.A. (Spain) Model: ONA-COMPACT 30 Year: 1988 Manufacturing Number: 5026/5912 Registration Number: 5026/8812 Type: Electrical Discharge Machine (EDM) - Die sinking Voltage: 220 V Bledpfx Aowf E Auoc Tjl Current: 5.6 A Pulse Power: 2 x 0.75 HP Apparent Power: 2.13 KVA Frequency: 50/60 Hz Estimated Table Travel: 300 x 200 mm Dielectric Tank Capacity: 100-150 L Approximate Weight: 1000-1200 kg

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic 2S Year of manufacture: 2004 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup Bljdpfxezcaxkj Ac Tol AGIE IPG generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and fully overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Vertex 3F, Bljdpozcap Ajfx Ac Tol Year of manufacture: 2007 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.03 – 0.33 mm (including fine wire module) Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Including AGIEJOGGER handheld control unit for convenient setup Including AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. You will receive a 6-month warranty on this! Includes user training at Techma on your overhauled machine. Optionally, we can also offer you the following services: - Transport - Commissioning - Training - Cooler

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, wire diameter (max.): 0.3 mm, overall weight: 3,900 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details. • U/V axes travel: ±70 mm • Number of controlled axes: 5 (X, Y, Z, U, V) • Taper cut: up to ±30° Bsdpfx Acey Ulp Ts Tsll • Generator: MC 3S (Lista 030.844) • Axis driver (DA): DA MC 3S (Lista 030.834) • Electrical cabinet: Cabinet Classic 3S (Lista 027.254) • Power supply voltage: 3×400 V / 50 Hz • Installed power: 9 kVA • Rated current: 14 A • Dielectric: Deionized water • Heads type: Submerged with wire guide nozzles • Wire drive motor: +GF+ / Maxon Motor (Swiss made) • Circuit diagram: 628.992 Additional equipment • MTA chiller (included in the sale) • Resin filters • Deionizers • Wire feed/recovery system

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total length: 1,050 mm, total width: 650 mm, workpiece height (max.): 250 mm, AGIECUT Excellence 3 eCut Year of manufacture: 2005 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged tank machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D Bsdpfoyu Iq Eex Ac Tell AGIEVISION control system AGIE IPG generator with eCut technologies Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional services available on request: - Transport - Commissioning - Chiller unit - Clamping devices

Year of construction: 2006, condition: refurbished (used), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Blodpfxjgfm Rre Ac Tjl Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient setup Incl. AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. Subsequently, we will commission the machine at your facility. You will receive a 6-month warranty on the machine. We would be pleased to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port Bedoxyxfpepfx Ac Tsll The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Bljdjwqcm Ujpfx Ac Tol Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Bljdpov Dkvrsfx Ac Tel Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Bedpfx Aem Amf Doc Tell Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, AGIECUT Excellence 2F Year of manufacture: 2002 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface roughness: 0.1 µm Ra Max. cutting rate in cylindrical cutting: 300 mm²/min Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER hand box Includes AGIE-Setup 3D After receiving your order, the machine will be cleaned, inspected, and thoroughly tested by our technicians. We would also be happy to offer commissioning and training services. Bodpjzbbndofx Ac Tsll

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Bledpfx Aox Uxglec Tol Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Excellence 3 Year of manufacture: 2001 Travel paths: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION control unit AGIE IPG generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Blsdpfsyx D I Aex Ac Tsl The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional: Transport, commissioning, chiller