Used Agie Evolution 2 for sale (142)

Condition: ready for operation (used), Agie Power module output PMO-02 B 614.030.5, used, minor signs of wear, 100% functional. Lsdei D Tx Aspfx Akweah

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES Lajdpfxoy Twkao Akwoh AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: ready for operation (used), Agie Low Power Supply LPS-20 A 645914.3, used, minimal signs of wear, 100% functional. Ledpfx Aei D Twljkwsah

Condition: ready for operation (used), Agie Low Power Supply LPS-20 B, 617.941.0, used, minimal signs of wear, 100% functional. Laedpfx Aksi D Twpjwoh

Condition: ready for operation (used), Agie video controller board VCB-01 A 629.793.1, used, minor signs of wear, 100% functional. Lsdpfxoi D Tyyo Akwjah

Condition: ready for operation (used), Agie MJG 4014 D, conductivity measuring system. 619 782.6, used, in good condition, 100% functional, scope of delivery as shown in the photos. Laodpfji D Tw Tjx Akwoh

Condition: ready for operation (used), Agie Power module, model PMO-03 B 616.021.2, used, minor signs of wear, 100% functional. Lasdpfx Asi D Tx Hskweh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Laodpfjy Irdkjx Akwsh

Condition: ready for operation (used), Agie MJG 2132 B 614400 B circuit board, used, minimal signs of wear, 100% functional. Lasdpei D Tw Eofx Akwjh

Condition: ready for operation (used), Agie Zch. MJG4022 A 619782.6, used, shows normal signs of wear, 100% functional. Lajdpfoi D Ty Iox Akwoh

Condition: ready for operation (used), Agie Digital bidirectional expansion module DBE-01, A 625854-5, used, minor signs of wear, 100% functional. Ljdpfx Aksi D Tvvjwoah

Condition: ready for operation (used), Agie Digital motor control unit DMC-01 B 626074.9, used, minor signs of wear, 100% functional. Ledpfx Aji D Tvyskwsah

Condition: ready for operation (used), Agie Zch. Signal Terminal Blok STB-06 A 621802.8, used, minor signs of wear, 100% functional. Lajdpfsi D Ty Ssx Akwsh

Condition: ready for operation (used), Agie LPS/03 A2 Low Power Supply. 629 722.0, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Laodpfx Aji D Twtokweh

Condition: ready for operation (used), Agie DBE-01 A3 Digital bidirectional expansion, serial no. 625854-5, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Ledpfx Akoi D Tvkjweah

Condition: ready for operation (used), Agie MJG 4014 D measuring circuit for conductivity. 619 782.6, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Lsdpfx Aei D Tw Njkwjah

Condition: ready for operation (used), Agie STB-06 A1 signal terminal block, part number 621802.8, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Ljdpei D Tynofx Akwjah

Condition: ready for operation (used), Agie VCB-01A video controller board, part number 629793.1, used, with minor signs of wear, 100% functional, scope of delivery as shown in the photos. Lajdpji D Tyvjfx Akweh

Condition: ready for operation (used), Agie DMC-01B digital motor control, serial number 626074.9, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Lasdpfx Akei D Tv Djwjh

Condition: ready for operation (used), Agie DBE-01 A3 digital bidirectional expansion. 625854.5, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Ljdpoi D Tvnsfx Akweah

Condition: ready for operation (used), Agie MJG 2129 D stepper motor driver, part number 622064.4. Used, shows minor signs of wear, 100% functional. Scope of delivery as shown in the photos. Lasdpfx Aji D Twzskweh

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! Ledszf E Nxepfx Akwsah TECHNICAL DETAILS Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Lsdpexyxfpefx Akwoah Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Lsdpsy S Ni Eofx Akwsah Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring. Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Travel Y-axis: 250 - mm Year of construction: 2,004 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,021 h, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total width: 2,400 mm, wire diameter (max.): 0.33 mm, overall weight: 4,400 kg, controller manufacturer: AGIE, controller model: Software version 07.08.01., product length (max.): 2,800 mm, number of axes: 3, wire diameter (min.): 0.07 mm, This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit. • Control: Agievision 5 (software version 07.08.01) • Condition: Excellent; regular maintenance; major service recently completed; fully operational; can be tested under power • EDM operating hours: approx. 37,021 h • Travels (U/V): ±70 / 70 mm Ljdpfx Asy D N I Eokwjah • Distance for clamping: 1,100 mm • Max workpiece dimensions: 1050 × 650 × 250 mm • Max workpiece weight: submerged 400 kg / non-submerged 800 kg • Max cutting height: up to 250 mm • Taper capability: ±30° / 100 mm • Positioning • Max manual speed: 2 m/min • Max programmable speed: 3 m/min • Resolution: 0.0001 mm • Geometric tolerances: per manufacturer specifications • Wire system • Wire diameter range: 0.07–0.33 mm (standard 0.20 mm) • Wire spool capacity: up to 25 kg • Wire tension: 0–25 N • Wire speed: 60–300 mm/s • Wire feed: semi-automatic • Wire disposal: chopper system • Equipment & features • Automatic wire threading system • Threading nozzles: 2 mm (optional 1 mm / 0.6 mm) • Combined wire guide system and cylindrical wire guide • Electronic handwheel (manual control) • Remote control with LCD display • TFT control screen (1024 × 768) • Keyboard and mouse control Dimensions Machine Depth 2800 mm