Used Afm Tug 40 for sale (57,827)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, empty load weight: 8,500 kg, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Pgodew U Dt Nspfx Ag Dsw Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2008, condition: excellent (used), centrifugal vertical cantilever pump chemcial pump FIP ALFA 65-40 V2CM construction of year:2008 Pjdpfsh Rwbrex Ag Degw DN:50 Nominal flow 40 m³/h Nominal head:45 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1470 electrical power 16,5KW 400V 50Hz 34,7 A engine speed: 1470 Execution: vertical, radially split volute casing pumps sump pump or channel impeller Applications: handling of paint, aggressive and process liquids, even with the presence of solid particles in suspension, in chemicals and petrochemicals industries length: 1700mm width: 700mm weight:450 kg

Condition: excellent (used), Precision workshop micrometer from renowned German manufacturer Mahr, model Marameter M, designed for highly accurate measurement of external diameters in the range of 0–40 mm. The device is in very good condition, fully functional, and stored in its original wooden protective case. Specification: • Measuring range: 0 – 40 mm • Model: Marameter M • Manufacturer: Mahr (Germany) • Catalogue number: 3206064 • Application: precise measurement of external diameters / shafts / cylindrical components • Durable metal housing • Arm with interchangeable measuring tips • High measurement stability and repeatability • Comes with the original wooden case Condition: Pgedpfxjxmlgtj Ag Dsw • Used, very well preserved • Last calibration: 2023 • Ready for use in a measurement room or laboratory.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Pgsdpexmvc Sefx Ag Dew Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc Pjdevry T Nepfx Ag Dogw pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Pjdpfx Aevwg Tmsg Dsgw

Condition: used, -KOM 3100- Offered here is a lot of VDI 40 tool holders. The lot consists of 12 items in total. Contents: - 1x VDI 40 tool holder + internal turning tool from 50 mm diameter Pgedpfx Aswuq E Hjg Djw - 1x VDI 40 tool holder + internal turning tool from 19 mm diameter - 1x VDI 40 tool holder + internal turning tool from 15 mm diameter - 1x VDI 40 tool holder + internal turning tool from 10 mm diameter - 1x VDI 40 tool holder + drill bit from 16 mm diameter - 1x VDI 40 tool holder + axial parting tool - 1x VDI 40 tool holder + rear turning tool from 47 mm diameter - 1x VDI 40 tool holder + rear turning tool from 40 mm diameter - 1x VDI 40 special tool holder - 2x VDI 40 tool holders - 1x VDI 40 plug

Condition: excellent (used), Year of construction: 2007, volume flow: 42 m³/h, power: 1.5 kW (2.04 HP), Rietschle VLT 40 vacuum pump 42m3/h 150mbar ELMO Rietschle vacuum pump PICO 40m3/h for sale year of construction 2007 Mains voltage: 230/400 V 50 Hz 5.2/3 A IP55 Total: 1,5 kW Speed: 1420 rpm Weight: 52 kg Pgsdsrhwprepfx Ag Djw Air delivery: 42/50 m3/h

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Pgodpfx Ajxl Rgijg Dow

Condition: excellent (used), Year of construction: 2001, For sale are operational and very well-maintained dual-fuel oil/gas burners of the brand Weishaupt RGL40/1-B (2550 kW), including gas valve Dungs DN 65, year of manufacture 2001, with control cabinet. Pgjdowgk Raepfx Ag Dsw

Condition: excellent (used), Weishaupt RGMS 40 dual fuel burner gas+heavy oil. 2600w Pjdpfxjmnqbtj Ag Dogw

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Psdpfx Aowmy Rijg Degw Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: used, -KOM 3099- CNC lathe VDI 40 tool holder set A set of VDI 40 tool holders consisting of 10 pieces is offered here. Contents: - 1x VDI 40 holder + internal turning tool from 50 mm diameter - 1x VDI 40 holder + internal turning tool from 23 mm diameter - 1x VDI 40 holder + internal turning tool from 16 mm diameter - 1x VDI 40 holder + drill 38 mm diameter Pgedpfjwuq A Ejx Ag Djw - 1x VDI 40 holder + back turning tool from 47 mm diameter - 1x VDI 40 holder + axial parting-off tool - 3x VDI 40 holder - 1x VDI 40 plug Weight: 30kg

Condition: good (used), functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, input voltage: 400 V, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Psdot H Irljpfx Ag Djgw Capability to handle Step Load 0-100 or 100-0 Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Pgsdpfxexl Rf So Ag Dew

Condition: excellent (used), Year of construction: 2008, GRASSAIR RLR 40 8B Screw Compressor Atlas Copco screw module Technical specifications: Capacity: 5.30 m³/min (5,300 L/min); Motor power: 30 kW; Pgodjw Niprspfx Ag Djw Max pressure: 8 bar; Operating hours: 12,847 h; Year: 2008; Compressor is fully operational. Net price: 12,200 PLN Gross price: 15,006 PLN Link to video below.

Condition: excellent (used), Year of construction: 2012, Meyn Deboner Type: D40 Deboner type: poultry thighs and drumsticks Performance: up to 2400 pieces per hour depending on application Dimensions: 1500x1300x2000 Weight: 500 kg Year : 2012 Pgodpfeqwguyox Ag Dsw We encourage a personal inspection, where you can assess the machine on-site, evaluate its performance, and confirm its high quality Preview Video

Condition: excellent (used), 40 running meters pallet rack Stow Used, very good condition, see pictures Pedpfx Aeiwlpfsg Djgw height 4 m depth 100 cm beam length 2,70 m Load / compartment 3000 kg Frame blue Carrier orange Negotiable price: € 2.570,-- net ex stock Offer consists of: + 14 pcs. frames pre-assembled, 12t field load, depth 100 cm, height 4 m + 52 pcs. beams, length 2,7 m, 3000 kg payload/slot + 108 pcs. suspension locks + 56 pcs. concrete anchors Load plate Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), Digital external micrometer by the renowned brand Mahr Micromar 40 EWR. Measuring range 25–50 mm with an accuracy of 0.001 mm. LCD display with ZERO, ABS, REL, and TOL functions. IP65 protection rating – dustproof and splash-resistant. Set includes gauge standard, key, documentation, and original case. Technical and visual condition very good. Pedpoxl Hqdofx Ag Degw

Condition: like new (used), 40 running meters pallet rack Nedcon New goods, see pictures! A top racking system of the major manufacturer NEDCON- this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 5,5 m Depth 110 cm, blue beam length 2,7 m orange girder with load /shelf 3050 kg Negotiable price: € 6.290,-- net ex stock Offer consists of: + 15 pcs. frames pre-assembled, depth 110 cm, height 5,5 m + 84 pcs. beams, length 2,7 m, 3050 kg payload/shelf +168 pcs. suspension locks + 30 pcs. Concrete anchor Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads available on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Podpfx Agsfkgpwe Djgw Fast - flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. Pgedpfx Aoxizb Ejg Dow 📌 Technical data: • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: excellent (used), For sale: a robust hydraulic press from the renowned manufacturer Vogel & Co Pressenfabrik Berlin-Borsigwalde. Model: 40×250 Machine number: 1715 Maximum pressure: 40 tons Oil capacity: 150 liters The machine is in good technical condition, complete, and comes with a control panel. Sturdy, stable construction – ideal for industrial applications in pressing, forming, or assembly. Electric power supply, hydraulic drive. Mounted on a pallet for easy loading. Condition: used, fully operational, with normal signs of wear. Pjdpfxew Rc Hmo Ag Dogw

Condition: excellent (used), For sale: SK40 holders, tool holders, milling heads, drill chucks, and cutting tools. Condition: used, in good technical condition. Offered brands: Haimer, Wohlhaupter, Schunk, Sandvik, Iscar, Garant, Fahrion, Gewefa, WTE, Kelch, WNT, Atorn, Bahmüller, Eroglu, Holex, LLambrich, Weldon, i-tec, Zurn Germany. Available: drill chucks, face milling heads, coolant-fed holders, and many more. 🛠️ Some with cutters, drills, turning tools. Price given per holder from photos 1-2, Haimer 60€/pc. Pgedpfxjw Hl Sxo Ag Djw

Condition: used, Year of construction: 1987, total height: 2,500 mm, total width: 2,000 mm, total length: 2,200 mm, Empty weight: 4.500 kg Price: On request - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 23300448 - Drive system: Conventional - Power [kW]: 11.0 Pedpfew Duc Uex Ag Djgw - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 450 - Z-axis travel [mm]: 400 - Table length [mm]: 1450 - Table width [mm]: 400 - Tool holder: ISO50 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - └ Type of digital readout: Mitutoyo - Transport dimensions: 2200mm x 2000mm x 2500mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), grinding diameter 450 mm grinding length 600 mm Pgjdoxcblqspfx Ag Dew centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m