Used 3D Probe for sale (2,779)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Gedpsdyah Sefx Adcsuh Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, Year of construction: 2018, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Layer thickness: 20–150 µm Laser power: 500 W Beam diameter: 100–500 µm Gujdpfxoz Irhkj Adcsh O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Laser operating hours “Laser Beam on”: 17,508 h (as of 11.04.2023) EQUIPMENT Filter system Zirox sensor Single laser Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals All axes professionally secured for transport The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum-, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys. Last processed material: AlSi10Mg

Condition: good (used), Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, inductive displacement sensor -Manufacturer: Mahr Feinprüf, Measuring Probes, Position Sensors, Displacement Sensors -Type: 1302 -Quantity: 1x measuring probe available -Box dimensions: 155/100/H35 mm -Weight: 0.3 kg Guodpozi D Twofx Adcsh

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. The machine was removed from a commercial environment and is now surplus to requirements. Known condition: Powers up successfully Gsdpfjzy Rwqox Adcjuh Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request.

Condition: used, Feeler gauge, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert, measuring probe, digimatic indicator -Manufacturer: Heidenhain, measuring probe TS 220 . 293 488-07 -Intake: SK50 -Case: with accessories, see photo -Dimensions of the case: 400/195/H140 mm Godpjg T Amrefx Adcjuh -Weight: 6.4kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 09120035, total width: 970 mm, total length: 930 mm, total height: 1,620 mm, overall weight: 445 kg, Equipment: documentation/manual, type plate available, Dear Sir or Madam, Godpfxszy H U Sj Adceuh We are selling our Tesa Micro-Hite 3D measuring machine. The measuring machine is in very good condition and has been well maintained. In addition, there are a number of accessories included. You can see these in the images below. If you have any questions, please do not hesitate to contact us.

Condition: used, CNC 3D coordinate measuring machine, MORA type Pico 0245.04.05.06 Machine No. Year of manufacture 2005 Gsderdlrxjpfx Adceuh Measuring range X = 600 mm, Y = 500 mm Measuring height Z-axis 400 mm Machine table = granite slab 1250 x 1200 mm Slab thickness 200 mm Clearance in machine column 720 mm Axis travel speed - setup max. 65 mm/sec. Axis travel speed - rapid traverse max. 250 mm/sec. Mains connection: 400 volts, 50 Hz - Granite worktop with 200 mm threaded grid - RENISHAW PH10T motorized rotary/tilt head with interchangeable TP20 measuring probe - 1 probe head holder with manual adjustment - Various probe heads - Gemodek Microspeed 10 axis control in adjacent control cabinet - Manual control via handheld control panel with joystick and LCD display - Reference sphere on the table - PC for measuring software: Intel Pentium 4, 512 MB RAM, mounted in the machine base - 22-inch TFT monitor - Windows XP operating system - INCA 3D measuring software (license expired) The measuring machine was operated with a rental license and maintenance contract. Measuring machine footprint: W x D x H 1950 x 1800 x 2450 mm Measuring machine weight: 1250 kg Control cabinet weight: 120 kg Very good condition

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10369, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output. Godpoz Dgfvefx Adcouh

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10342, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Godjz Dugnopfx Adcsuh Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10368, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Gjdpfx Adsz Dudmjcjuh Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: good (used), Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, inductive displacement sensor, display unit, measuring indicator -Manufacturer: Mahr Feinprüf, millitron display unit -Type: 1222 -Quantity: 1x measuring probe available -Dimensions: 200/150/H260 mm Gusdpfx Aezh Ez Hedceh -Weight: 3.5 kg

Condition: used, functionality: fully functional, machine/vehicle number: L2406, Year of construction: 2023, operating hours: 494 h, total length: 2,772 mm, total height: 2,281 mm, total width: 1,683 mm, overall weight: 2,869 kg, input voltage: 230 V, input frequency: 60 Hz, ambient temperature (max.): 29 °C, table width: 609 mm, table length: 914 mm, Equipment: compressor, FDM Technology We offer the Stratasys F900 industrial-grade 3D printer, which utilizes advanced FDM (Fused Deposition Modeling) technology. The system supports 14 certified materials, including biocompatible, flame-retardant, UV-resistant, weather-resistant, antistatic, flexible, engineering-grade, tooling, chemical-resistant, and high-temperature-resistant materials. The Stratasys F900 is an industrial FDM 3D printer designed for high-performance additive manufacturing. It enables serial production, functional prototyping, tooling and fixture production, and the production of parts for final products. The printer supports the MTConnect platform, has an integrated monitoring camera, allows for unattended operation, and ensures repeatable, industrial-quality production. It supports native CAD files from SolidWorks, CATIA, Siemens NX, Autodesk Inventor, and other systems. -Large build volume: 914 × 610 × 914 mm. -14 certified engineering materials. -Layer thickness: 0.127 / 0.178 / 0.254 / 0.330 / 0.508 mm. -Accuracy up to ±0.089 mm. -Heated, enclosed build chamber. -Soluble or breakaway support material. -Suitable for prototypes, tooling, and end-use parts. Gujdezv S Rkjpfx Adcjh Optional equipment: -Transformer -HW upgrade for the F900 system – dedicated print head for hard materials: -Nylon 12CF and Antero 800NA (reinforced material feed motors) -Set of accessories and fixtures from the manufacturer for brand new STRATASYS 3D printing systems -GrabCAD, Insight, and Control Center software

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10367, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Gedpfxjz Dudgj Adcjuh Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10356, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Guodpfxsz Duhro Adcsh Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: fe63b5ea, Year of construction: 2022, Markforged Onyx Pro 3D Printer (2022) – incl. accessories – excellent condition For sale is a Markforged Onyx Pro (Desktop Series), delivered in August 2022, in perfect technical condition and with very little usage. The current new price from Markforged is approximately €12,538 including the service package. Here you get a well-maintained device with complete accessories at a significantly reduced price. Technical Specifications - Printing process: FFF with Continuous Fiber Reinforcement (CFF) - Plastic materials: Onyx, PLA - Fiber: Glass fiber (continuous fiber reinforcement) - Layer thicknesses: 0.1 / 0.125 / 0.2 mm - Build volume: 320 × 152 × 154 mm - Eiger software (cloud-based) - Serial number available Ideal for functional components, fixtures, prototypes, and small series production in industrial environments. Scope of Delivery - Markforged Onyx Pro 3D printer - Dry box for material storage - Build platform Gsdpfxjyh Hikj Adcsuh - Accessory set: - 3× FFF plastic replacement nozzles - 3× CFF fiber replacement nozzles - 2 original sealed filament spools included - Original invoice from Mark3D GmbH - Professional initial installation was carried out by Mark3D Service Status - The original 3-year service plan was valid until 30.08.2025 and is now expired. - There is currently no active service contract. Condition - Very well maintained - Minimal usage - Fully functional Viewing and functional test available by appointment. Asking price €8,490 negotiable (net) Serious basis for negotiation. Significant savings compared to current new price. Other - Sale preferably to commercial buyers - Collection preferred; shipping available by arrangement All information has been provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: good (used), functionality: fully functional, machine/vehicle number: J5500144, Year of construction: 2020, operating hours: 5,336 h, Stratasys J55 Prime professional full-color PolyJet 3D printer available due to upgrade to a larger production system. The machine was professionally maintained during operation and is suitable for design studios, prototyping labs, universities, and research environments requiring high-quality multi-material and full-color models. Specifications Total printing hours: approx. 5,336 h Printheads recently replaced (approx. 250 h use) Professionally serviced during operational period Machine idle approx. 1 year so technical inspection recommended prior to use Original system value > €120,000 Stratasys ProAero Air Extractor (PolyJet air filtration unit) included Stratasys Scale / Scanner included Standard cables and connections included Available service history documentation Typical applications Industrial design & product development Architecture and design prototypes Medical and educational models Godjytg Rzspfx Adcouh Multi-material and full-color prototyping Additive manufacturing research Machine available for inspection by appointment. Collection location: Belgium. Please contact us for additional information, photos, or inspection arrangements.

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Ask for specification! Gedsw Ty Hcspfx Adcouh

Condition: used, Year of construction: 2017, operating hours: 24,500 h, total length: 2,250 mm, total height: 1,450 mm, total width: 1,250 mm, overall weight: 750 kg, input voltage: 400 V, input current: 30 A, HP Jet Fusion 3D 4200 – 2017 | Fully Maintained | Complete System HP Jet Fusion 3D 4200 industrial 3D printing system, manufactured in 2017. The machine has been fully maintained by HP. Last print was run on 17/07/26. Manufacturer: HP Model: Jet Fusion 3D 4200 Manufactured: 2017 Technology: HP Multi Jet Fusion (MJF) Gusdpfxozx U Iks Adcoh Condition: Used Maintenance: Fully maintained by HP Build volume: 380 × 284 × 380 mm Layer thickness: 80 microns Included: HP Processing Station Build Units: 2 × HP Jet Fusion 3D Build Units Printer can be viewed. Location: Available for inspection by appointment. System Includes HP Jet Fusion 3D 4200 Printer HP Processing Station with fast cool. 2 × Build Units Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. The HP service contract has EXPIRED. The buyer will need to arrange service and recertification on relocation. That cost is not included in our price.

Year of construction: 2023, condition: ready for operation (used), Automatic 3D XRAY with laser option for Z reference, without calibration plate from 01/2023 with 1500 h. Gujdpfx Aezuwwysdceh

Condition: excellent (used), We offer a professional optical 3D measurement system, KEYENCE VL series, designed for fast and precise scanning of technical components. This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial environments. Set includes: – Scanning head VL-370 Condition: Very good, well-maintained equipment Gsdez Sllyspfx Adceuh Note: Set is sold without monitor / PC unit (option to equip according to your needs) Manufactured: Made in Japan

Condition: ready for operation (used), functionality: fully functional, total length: 900 mm, total height: 2,000 mm, total width: 800 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Internal dimensions of the installation space: approx. 400 × 400 × 500 mm MACHINE DETAILS Operating voltage: 240 V Frequency: 50/60 Hz Gedpfxoz Ilt Ho Adcsuh Rated current: 6–12 A Dimensions & Weight Dimensions (L x W x H): 900 x 800 x 2,000 mm Weight: 500 kg External reference: Alesco - Lot 1

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: Gujdpez Slmkefx Adcoh • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: used, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, VideoCheck S 400x200 3D CNC Year of manufacture: 2014 Measuring range: X = up to 400 mm Y = up to 200 mm Z = up to 250 mm Installation area: Depth: 770 mm Width: 778 mm + 400 mm travel Height: 1673 mm + 200 mm travel Gedpfxsxbifpo Adcouh Measuring device weight: up to 480 kg Max. workpiece weight: mmax = 40 kg

Condition: good (used), functionality: fully functional, Year of construction: 2016, overall weight: 600 kg, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, Stratasys Fortus 450mc for sale, Contruction year 2016, low operating hours The Stratasys Fortus 450mc is an industrial-grade FDM (Fused Deposition Modeling) 3D printer, widely used in aerospace, automotive, and medical device manufacturing for functional prototypes and end-use production parts. This unit has been operated in a professional production environment and is fully functional. Technical Specifications: Build envelope: 406 x 355 x 406 mm (16" x 14" x 16") Technology: FDM (Fused Deposition Modeling) Layer thicknesses: 0.005"(0,127mm) / 0.007"(0,178mm) / 0.010"(0,254mm) / 0.013"(0,33mm) Number of material bays: 4 - 2 model + 2 support Machine weight: approx. 600 kg Machine running on external Air pressure, to reduce machine noice. Internal air compressor can be purchased and installed. Materials/Licenses: ABS, ASA, PC, PC-ISO, PC-ABS, Nylon12, ULTEM9085, ULTEM1010, Antero. Included: - Fortus450mc + EU Transformer. - Support Removal Wash Unit (German Sonic Cleanstation UW90) Gsdpoznl N Rjfx Adcouh Machine located in Roskilde, Denmark

Condition: used, Year of construction: 2020, Digital UV Coating and Finishing System MGI JETvarnish 3D Evo 75 Maximum sheet size: 1,200 × 750 mm Processable material: 135–800 g/m² Gsdpfxszqyrrs Adceuh Coating unit: 135–400 g/m² Suitable for coated and uncoated papers and cardboard, pre-coated as well as laminated/cashed substrates, and suitable plastic media. Coating: Varnish High-Gloss clear coat 18-liter tank Coating layer thickness: 7–232 µm Digital UV coating finishing, partial and full-area coating, as well as 3D/relief coating effects. Machine is operational and available for immediate delivery. Location: Western Europe Price on request.