Used 3 Axis Machining Center for sale (81,846)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No reserve price – guaranteed sale to the highest bidder! The machine spindle has been replaced and has zero spindle hours! Payment is due one week after purchase of the machine! Placing a bid obligates the buyer to collect the machine within the specified period between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 550 mm Travel Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Number of tool stations: 40 Table dimensions: 850 x 350 mm MACHINE DETAILS Control: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Total weight: 10,000 kg EQUIPMENT KNOLL chip conveyor KNOLL paper band filtration system SCHUNK zero-point clamping system Tool holders and tools located on the tool changer Iodpfoxm Tbfex Ag Uoal Probe

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Isdpfxjt Dmlfe Ag Usal Lighting Enclosed Guarding

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Ijdpfowr Drnox Ag Uoal Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 103, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-axis: 110° C-axis: 360° Tool holder: ISO25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 Iasdpfx Aextm Nvsg Uol MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Various tool holders Operating manual / Electrical schematic

Condition: good (used), Year of construction: 2020, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 2080594, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, operating hours of spindle: 9,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Protection: 200 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin-spindle configuration Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimal quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Iajdpfx Agsxt D Ezo Ujl Machining Area Spindle distance: 600 mm Travel Paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swiveling mount with two separate rotary tables for installation of clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Maximum workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table rotation speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. loading moment: 500 Nm Tool Change Times Chip-to-chip for n < 10,000 rpm: > 2.75 s Chip-to-chip for n < 17,500 rpm: > 3.15 s Note The system is delivered without product-specific tools, fixtures, or robot grippers.

Condition: used, Year of construction: 2017, functionality: fully functional, CNC Heidenhain iTNC 640 HSCI TRAVELS X-axis longitudinal travel: 3,000 mm Y-axis cross travel: 2,700 mm Z-axis vertical travel: 1,250 mm Rapid traverse speed: 40 m/min Maximum acceleration: 5 m/s² Distance between columns: 3,700 mm TABLE Worktable dimensions: 2,000 × 3,000 mm Worktable load capacity: 5 tons/m² GLOB 123 BI-ROTARY HEAD Hydraulic clamping of axes C-axis travel: 400° (±200°) A-axis travel: 230° (+120° / -110°) Rotary axis speed: 10 rpm Iedpjx Dm Nqofx Ag Ueal Spindle power–torque: 40 kW – 139 Nm Max spindle speed: 15,000 rpm Tool holder: HSK-A-100 TOOL CHANGER MRT 40/100 Tool capacity: 40 Tool holder: HSK-A-100 Year of construction: 2017 Machine equipped with: • Remote electronic handwheel HR10 • Belt-type chip conveyor along the Y-axis • Low-pressure external coolant system • Air blow through the spindle + external nozzle • External spray-mist tool cooling system • RMP60 probe • NC4 laser tool presetting • Monitronix device for tool-load and head-vibration monitoring • Heidenhain DCM anti-collision software • Dual balancing pistons for the vertical ram • Electrical cabinet air conditioner • Operation and maintenance manual and CE declaration

Condition: excellent (used), Year of construction: 2008, operating hours: 16,643 h, functionality: fully functional, 5-Axis High-Speed Machining Center DMG MORI HSC 20 Linear (3rd Generation) Year 2008 CELOS CNC with Siemens Sinumerik One X/Y/Z Axes: 200 / 200 / 280 mm X/Y/Z Axes: Linear Drives HSK-40 High-Torque Spindle Maximum Speed: 42,000 rpm 22-Pocket Tool Magazine 5-Axis Precision Package, Including: Iodpsw S T T Hjfx Ag Uoal - 5 Axes - Erowa ITS 100 Zero-Point Clamping System - BLUM 50 DigiLog Laser Control Tool Measurement - DMG PowerProbe 400 Infrared Workpiece Measurement Package - 3D QuickSet - Electronic Handwheel Oil and Emulsion Separation System Coolant Unit for Control Cabinet

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Iajdpfx Agsn Nv H Sj Ujl Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Condition: used, Year of construction: 2011, x-travel 1016 mm y-travel 660 mm Iodpfx Agswvl Apj Usal z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 106, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-Axis: 110° C-Axis: 360° Tool holder: ISO 25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Iasdpfx Agextm H Ij Ujl Machine weight: 3,550 kg EQUIPMENT Renishaw probing system Various tool holders Operating manual Electrical diagram

Condition: used, Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, machine/vehicle number: 2630079, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, controller manufacturer: Siemens, controller model: 840D sl, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, rotational speed (max.): 40 rpm, overall weight: 28,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 11,000 h, distance between spindles: 800 mm, number of spindles: 2, number of slots in tool magazine: 84, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This high-precision twin-spindle machining center from the SW series is designed for maximum productivity in mass production, especially in the automotive and supplier industries. The machine features two symmetrically arranged motor spindles, a twin NC rotary carrier, and two direct drive rotary tables, enabling simultaneous 5-axis machining and parallel metal cutting operations. Equipped with a Siemens 840D sl CNC control, minimum quantity lubrication, high-dynamic feed drives, and an 84-position tool magazine, the system provides dynamic, precise, and energy-efficient machining processes. The compact design and pick-up capable tool system ensure short chip-to-chip times and high machine availability. This machine is ideal for demanding precision machining tasks such as housings, structural components, gear parts, and components made from aluminum, cast iron, and steel in high-volume production. CNC Control SIEMENS 840D SL Electrical connection Supply voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 152 kVA Power factor: 0.6 Protection: 250 A gG (5 s) Weight Machine operating weight: 28,000 kg Transport weight: 24,500 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Iedpfx Agjxt D D Rj Uoal Max. total tool weight: 400 kg Feed Drives Drive type: Three-phase synchronous motors Travel measurement system X/Y/Z: Direct, absolute X1- and X2-Axis Rapid traverse: 120 m/min Max. acceleration: 10 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 120 m/min Max. acceleration: 11 m/s² Kv factor: 6 Peak force: 20,000 N Continuous force: 10,000 N Positioning accuracy: Tp = 0.008 mm Z1- and Z2-Axis Rapid traverse: 120 m/min Max. acceleration: 20 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Spindle diameter: 40 mm Tool interface: HSK-A63 Cooling: Liquid-cooled motor spindles Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (nominal torque) Machining Area Spindle distance: 800 mm Traverse paths: - X-axis: 800 mm - Y-axis: 900 mm (optional 1,200 mm) - Z-axis: 650 mm Difference coupled Z axes: < 1.0 mm Difference coupled X axes: < 1.0 mm Workpiece Clamping / Table System Twin rotary carrier (Q axis) with two direct drive NC rotary tables (A/U axes) Swivel time 0–180°: 5.0 s Max. asymmetric load: 1,600 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 800 kg Peak torque: 1,900 Nm Nominal torque: 1,300 Nm Max. table rotation speed: 40 rpm Tool Change Times: Chip-to-chip with n < 10,000 rpm: > 3.0 s Chip-to-chip with n < 17,500 rpm: > 3.15 s Note The system is supplied without product-specific tools, clamping devices or robot grippers.

Condition: ready for operation (used), Sigma Zenit 3 machining center Manufacturer: Sigma Type: Zenit 3 Condition: good, ready for operation Power-on hours: 8600h Iaodpfx Agexnpi Ie Uol Spindle hours: 1800h Spindle speed: 12,000 Spindle taper: SK40 X-travel: 1000mm Y-travel: 500mm Z-travel: 550mm Tool stations: 50 Chip conveyor Oil mist extraction Through spindle coolant (IKZ) With 4th axis Nikken

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: 530, rotary table diameter: 280 mm, spindle speed (max.): 16,000 rpm, 5-axis machining center Manufacturer: Hermle Model: C20U Year of manufacture: 2006 Control: Heidenhain iTNC-530 Power-on hours: approx. 48,000 h Spindle hours: approx. 20,500 h Serial number: XXXXX Technical specifications: ----- • Travel (X-Y-Z): 600 x 450 x 450 mm • C-axis: 360° • A-axis: +/-115° • Swivelling rotary table Ø280 mm • Spindle: 16,000 rpm • Magazine: 30x SK-40 • Additional magazine with 43 stations Iedswqnnkopfx Ag Uoal • Standard coolant system • Air blast through spindle + blow-off device • Blum laser for tool breakage detection and measurement • Renishaw 3D probe • Electrical thermal compensation • Sealing air for glass scales • Chip conveyor Accessories: ----- • Documentation • Rinsing gun • Handwheel • Maintenance history

Condition: new, Year of construction: 2026, Technical data Control system multi-axis real-time interpolator, with active trajectory prediction, LAN communication, EtherCat, sampling time below 1ms, correction map, RTCP, remote service access Working area 2100x4100mm Z-axis clearance 400mm Drive system servo drives with EtherCat protocol, X, Y hardened helical strips ground in accuracy class 6, Z axis ball screw in accuracy class 5 Linear bearings trapezoidal rails Speed ​​of travel up to 60 m/min Program resolution up to 0.0001 mm Positioning accuracy 0.01mm Gate drive double-sided master/slave with gate angle correction Electric spindle 17kw s6 tilt/rotate head kit axis range a= +- 185°, c= +- 320°, orbital k plus px-2 15/12 63f nc hsk63 for 5 axis machines Tool cone HSK63F Maximum speed of the electrospindle up to 24,000 rpm Design welded steel, ribbed, stress-relieved, precisely machined Milling cutter shank diameters from 2 to 20 mm (optional up to 26 mm) Iedevyrgqepfx Ag Ujal Brushless electrospindle Table type vacuum, pneumatic sections Equipment options 3-position linear magazine 16-position revolver magazine with tool presence sensor positioning bases and vacuum blocks automatic central lubrication with solid grease pressure booster security fence intelligent vacuum sections wireless manipulator sensor for measuring the length and diameter of the tool positioning laser

Condition: good (used), Year of construction: 2006, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table width: 1,000 mm, table length: 600 mm, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Operating hours: 32,379 h (as of July 9, 2024) Spindle running time: 15,674 h (as of July 9, 2024) Clamps on table are not included! Iaodpfexcpkzjx Ag Ujl Machine available from: Imediately

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: TOR4 044, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, TECHNICAL DETAILS Travel X: 700 mm Travel Y: 400 mm Travel Z: 550 mm Spindle type: SK40 Spindle speed: 12,000 rpm Iedpfsxtm Dyjx Ag Ujal Tool changer: 24 stations MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Dimensions (L x W x H): 2700 x 2100 x 2700 mm Weight: approx. 4,000 kg EQUIPMENT 4th axis Internal coolant supply (IKZ) Filter system Extraction unit NC clamp Rhm RKE-125L SK40 tool holders

Year of construction: 2010, condition: excellent (used), 4-AXIS MACHINING CENTER 2 PALLETS Crs 730 x 730 x 740 mm, 2 pallets 500 x 500 mm, spindle speed 18,000 rpm, pallet indexing in all degrees, Renishaw preparation, BT 40 40 tool magazine, 70 bar center coolant, chip conveyor. CN MATRIX Isdepy D T Hepfx Ag Usal

Condition: excellent (used), Year of construction: 2015, High-Performance Machining Center Spinner VC1200-HS / Siemens 840 SolutionLine Iajdpfx Aoxcwf Hsg Uol Technology: In-line direct drive Spindle speed: 12,000 rpm Power: 28 kW Torque: 178 Nm Tool holder: SK 40 General: - Equipped with Siemens 840DE-SolutionLine control system and 15" color screen - Features graphical user interface for shop-floor programming (Siemens "Shop-Mill") and software version "Operate" - Milling spindle up to 12,000 rpm with in-line direct drive - Travels: X-1200 mm, Y-730 mm, Z-650 mm - Rapid traverse: 48 m/min - Tool taper size 40 according to DIN 69871-A, pull studs according to DIN 69872-A - Air blast unit for spindle taper - High-speed automatic tool changer (double-arm) for 32 tools Tool Magazine: - 32 magazine positions, double-arm tool changer - Clamping surface: 1,400 x 710 mm - Max. table load: 1,000 kg - Rapid traverse in X/Y/Z: 48 m/min - Linear guides in all 3 axes - Full enclosure with work area lighting - 4th axis with Siemens motor and direct measuring system (Heidenhain encoder) Further Equipment: - Chip disposal via scraper belt chip conveyor - Coolant supply with internal coolant system (IKZ), filter, 22 bar, and additional 350-liter tank - Direct path measuring systems in X/Y/Z (glass scales) - Workpiece measurement with touch probe, BLUM TC52 - Tool magazine: double-arm tool changer, 32 tools - Compressed air: connection at the spindle head - Control options: Siemens MyDynamics, milling package, 4 axes - 4th-axis rotary table MRNC-320N with Siemens motor and direct measuring system (Heidenhain encoder) - Tailstock NTTS-320, height-adjustable for rotary table

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Ijdpsxd T Rzefx Ag Uoal Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: new, Year of construction: 2026, Technical Data Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 1 ms, RTCP, remote service access. Working Area: X: 2000-4700 mm; Y: 3000-30000 mm Z-Axis Clearance: up to 3000 mm Drive System: Servo drives with EtherCat protocol; X, Y, Z axes equipped with hardened, ground, helical racks accuracy class 6 Linear Bearings: Trapezoidal rails; quadruple guideway size 35 for Y axis, triple guideway size 35 for X and Z axes Traverse Speed: X, Y up to 25 m/min; C, A up to 6000 degrees/min Program Resolution: 0.0005 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave with gantry angle correction Electrospindles: up to 50 kW Electrospindle Inverter: Yes Maximum Electrospindle Speed: 24,000 rpm (optionally 6,000 – 40,000) Construction: Welded steel, stress-relieved, precision-machined gantry design Table Type: Modular T-slot (steel or aluminum), separated from the main construction Available Additional Options: 3D printing head Tool cooling Tool changer: linear, mobile linear, turret, or chain type Cutting saws Laser scanner Wireless measurement probe Machining area separators Compensation map Roll-up roof Vacuum table Suction foot for 5-axis heads Dedicated CAD/CAM software 3D granulate printers can process a variety of plastics such as PLA, ABS, PETG, polyamides, or polypropylene. #router #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminum Iedpswhxcgjfx Ag Ujal #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Condition: used, Year of construction: 1999, Technical details: x-travel: 690 mm y-travel: 400 mm z-travel: 550 mm B-axis (table): 360° mm control: Siemens 840 D number of spindle speeds: max. 15 000 U/min tool clamping: System nach DIN 69893 tool taper: HSK-A63 tool changer magazine: chain magazine: 12 places Stück traversing speed: x/y/z Axis: 40 total power requirement: 195 kW weight of the machine ca.: 13,0 t Traveling Column Milling Machine - the tool changing unit consist of 3 -NC axis and 1 NC- rotary table axis - ATC ( with magazine) - rotary table Type SKH-NC 4/029, diameter=460mm , table surface plate Ø 500 x20mm, revolution per minute max. 22 rpm - control panel SIEMENS - Spindel-Typ: DRF-WE-255-N-W-15-30, 15000 U/min., Spindelleistung = 30 kW - chip conveyor Make Knoll type 400K-3/280, ejection height 1150mm - cooling system for spindle make SCHIMBKE Type DK 80V, 3,36 kW i.D. * Ijdpfx Agsu Idl Se Usal

Condition: used, Year of construction: 2017, Operating hours: 51,800 h Program run hours: 15,100 h Technical Data: Travel paths/axes X = 800 mm Y = 850 mm Z = 1,050 mm B = 360°, 0.001° Max. spindle speed: 12,000 rpm Isdpfjxqp Ivjx Ag Usal Total connected load: 77 kVA Required space, LxWxH: 9,000 x 5,500 x 4,000 mm Weight: 18,100 kg Equipment: - Siemens 840D - Electronic handwheel - Heavy-duty machining package - Tool changer, rotary magazine with 180 places - Tool holder HSK 100 - Operator control panel - Internal coolant supply - Measurement and monitoring: Renishaw, infrared TDS, MPC

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Iaedpfx Agexmd Sne Uol Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: good (used), Year of construction: 2006, A Heidenhain iTNC530 system is installed. Axes: X 3000 mm, Y 900 mm, Z 900 mm Table: 3000 x 900 mm Table load: 6000 kg Working speed: 3000 rpm Rapid traverse: 20000 mm/min Tools: 24 Iaodpfxjxbzrnj Ag Uol Motor: 22/27 kW Milling head – semi-automatic (see photo) Indexing range: A-2.5° B-2.5° The machine is not equipped with through-spindle coolant supply.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, - Working area: 3200x1325x125mm (X, Y, Z) - Main spindle: 9kW - Drilling unit: 18 vertical, 4+2 horizontal Ijdpfx Aex Apxrog Ueal - Grooving saw in X axis - Tool magazine: 8 positions