Used 2 Needle Sewing Machine for sale (100,761)

Condition: used, mileage: 409,000 km, power: 100 kW (135.96 HP), first registration: 11/1997, fuel type: diesel, tire size: 215/75 R 17.5, axle configuration: 4x2, wheelbase: 4,900 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,950 mm, total width: 2,360 mm, Year of construction: 1997, = Additional options and accessories = - 4x2 - Leaf suspension - Mechanical tachograph - Radio/CD player - Sun visor = Further information = Technical Information Number of cylinders: 4 Axle configuration Tire size: 215/75 R 17.5 Suspension: Leaf suspension Front axle: Steered; Tire tread left: 60%; Tire tread right: 60% Hnsdpfsx Dczijx Ag Uog Rear axle: Twin tires; Tire tread left inner: 25%; Tire tread left outer: 25%; Tire tread right inner: 25%; Tire tread right outer: 25%; Reduction: single reduction Weights Unladen weight: 4,690 kg Payload: 2,800 kg Gross vehicle weight (GVW): 7,490 kg Functional Loading platform height: 95 cm Condition Damages: none

Condition: new, Year of construction: 2020, CNC engraving machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technische0.321020121002 Daten: Table size 700 mm x 480 mm Weight: 50 kg External dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories : Calculator Hodpfx Agsf Tnf Us Ujng Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve spray With it versch. Collets and cutters - NEW

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201712075033692, Haitian Model / Type: JU7500/2 Plus Year of manufacture: 2018 Serial no.: 201712075033692 Clamping unit Clamping force: 750 ton Opening stroke: 900 mm Max. daylight: 2050 mm Tie bar spacing (H x V): 1110 x 960 mm Platen size: 1510 x 1440 mm Centre ring diameter: 200 mm Centre ring adapter plate: 175 mm Min. mould height: 450 mm Max. mould height: 1150 mm Open distance (open loopweg): 2050 mm Ejector Ejector stroke: 300 mm Ejector force: 195 kN Injection unit Theoretical max. injection volume: 2262 cm³ Max. shot weight in PS: 2058 g Max. specific injection pressure: 2200 bar Injection stroke: 450 mm Screw diameter: 80 mm Hnjdpfx Agsx Stfws Uog Screw type: Conventional, with mixing section Screw speed: 0–145 rpm Min. screw speed: 15 rpm Plasticising capacity (PS): 255 kg/h Cylinder type: 5000 Hydraulic / electrical Hydraulic pressure: 210 bar Oil tank capacity: 1000 litres Power supply: 400 V Installed power: 86 kW Nozzle / bedplate Nozzle radius: R39 Nozzle through-hole in bedplate: 100 mm Nozzle bore: 6 mm Weight & dimensions Machine weight: 32 ton Overall dimensions (L x W x H): 970 x 510 x 270 cm Included Control system included Platform and stairs included Safety crash protection included Product weights (reference) Min. shot weight (1/2D): 205 g 1D: 410 g 2D: 820 g Max. shot weight (3D): 1230 g Note: Motan vacuum conveyor with cyclone separator not included; it must be dismantled and left on site.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: ZSCT-II (Bj.2014) + ZSCT-III (Bj.2019), overall weight: 570 kg, Year of construction: 2014, power: 4.5 kW (6.12 HP), We are offering a fully refurbished Iversen graphic ZSCT-II powder coating machine, year of manufacture 2014, for a negotiable net price of €14,000. In addition, we have an Iversen graphic ZSCT-III powder coating machine, year of manufacture 2019, available for a negotiable net price of €7,900, not refurbished but in working condition. As a special bonus, you will also receive a complimentary Iversen graphic ZSCT-III powder coating machine, year of manufacture 2016, provided as a donor for spare parts. Hnodox Uqbnspfx Ag Usg Dimensions can be seen in the attached image. Model number: ZSCT-II Voltage: 380 V Power: 2–4.5 kW Belt width: 1000 mm Belt length: 1000 mm Sheet thickness: 1–5 mm Overall dimensions: 2000 × 1800 × 1850 mm Net weight: 570 kg Model number: ZSCT-III - Year 2019 - 91/0150 Voltage: 380 V Power: 3.1 kW Pressure: 8 bar Model number: ZSCT-III - Year 2016 - 51/0116 (for spare parts) Voltage: 380 V Power: 3.1 kW Pressure: 8 bar If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, 16 pages buckle Folding machine Heidelberg Stahlfolder TD94/6-4 Falzmaschine / Folding machine Heidelberg TD-94/4-4-2 Baujahr / Year 2001 - Serial-No. 701544 Rundstapelanleger / Round Pile Feeder  Hnsdpfx Agsx Ur Rks Ueg Arbeitsbreite / Working width max. 940mm Falztyp / Folding Type 4 - 4 - 2 buckles Schuppenauslage / Stream delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, The RA 2 Tube End Finishing Machine is an essential tool for every workshop, designed to simplify the assembly and welding of tubes at a precise 90° angle. This robust device caters to various tube diameters while allowing for horizontal and vertical operation, making it versatile for both dual and corner unions. With its capability to handle tubes with wall thicknesses of up to 5 mm, from steel to non-ferrous metals, the RA 2 ensures quick and efficient machining. An eccentric shaft guarantees minimal effort during operation, enhancing productivity. The machine comes standard with an operator manual to facilitate setup and use. For your tube end finishing needs and additional inquiries, you can request a quote today and elevate your performance with KNUTH equipment. Hsdpfowhkf Hox Ag Ueng

Condition: used, material width 320 mm coil weight 2,6 t material thickness 0,5 - 2,0 mm coil internal diameter 400 - 510 mm Hnjdpfx Ajvuk Shjg Usg coil external diameter 1200 mm no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 band speed 0 - 30 m/min power capacity 1,5 kW weight 1,5 t Dimensions (WxDxH) 2,0 x 1,4 x 1,9 m Straightening machine with infinitely variable drive, straightening rolls individually manually adjustable, pneumatic alligator opening of the roller cassette Decoiler with pneumatic lag break, manual centralized expansion as is where is, WITHOUT putting into operation in our warehouse Price for commissioning (in given condition) on request

Condition: refurbished (used), functionality: fully functional, center height: 100 mm, grinding length: 650 mm, Internal & external cylindrical grinding machine Studer S20-2 Centre distance: 650 mm – Centre height: 100 mm Hnedsqv Eg Rjpfx Ag Uog Accessories on request! Ready for delivery!

Condition: excellent (used), Year of construction: 2019, Ref: 11037 . 2019 SCS Automaberg 2 HCR Semi-automatic 2 head cover corner rounding unit Features: Sturdily built, easy adjustable Perfect for small and medium production Quick and Easy Makeready Easily Moveable Hnedpsxx Uv Ujfx Ag Uog Reduced Floor Space Process: Covers are insert manually into the corner rounding station In two passes, the machine allows the perfect rounding of all 4 corners Equipped with heating system which softens the glue before rounding Corner pressure time can be adjusted easily on the display. Specification: Open Cover Size: Max 600 x 570 mm / Min: 143 x 92 mm Cover corner rounding radii: 4mm - 15mm Voltage: 230 V / 1 ph / 50 Hz Power: 0,5 kW Compressed Air: 0,5 ltr/cycle at 6 bar Weight: 200 kg Dimensions (L x W x H) 1.420 x 1.110 x 1.560 mm

Condition: ready for operation (used), Screening machine Haver Böcker 15/40-2 Brand: Haver Böcker Hnedox Stthjpfx Ag Usg Dim. screen: 4000 x 1500 mm – 2 decks Incl.: E-motor and springs.

Condition: good (used), Year of construction: 1981, wire diameter range: 1,0 - 5,0 mm ring diameter range: 100 - 600 mm wire feeding length: max. 2.000 mm Hjdsb Hqz Uopfx Ag Uong output: 10 - 120 pcs./min.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 3,900 kg, total length: 6,200 mm, total width: 1,200 mm, total height: 2,300 mm, motor manufacturer: Bitzer, power: 240 kW (326.31 HP), New Advansor Cubig 2 4x4 installation. Central CO2 refrigeration and freezing system. Equipped with Bitzer compressors and Alfa Laval plate heat exchanger for heat recovery. Hjdpow R U Nmefx Ag Uong Cooling capacity: 105 kW at -8°C Freezing capacity: 90 kW at -48°C Complete set including condensers (gas coolers) and an additional plate heat exchanger for heat recovery. Fully pre-wired control panel with Danfoss control equipment. Eco gas cooler and Alfa Laval plate heat exchanger. Top brand – Danish quality. Including documentation, diagrams, and accessories.

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request Hjdevut Dtopfx Ag Ujng

Condition: new, Year of construction: 2026, Glue spreading machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) working width: 1.300 mm max. passage height: 100 mm speed: 18 m/min working height: 900 mm diameter of application rollers: 185 mm connected load: 0,5 Hp 0,37 KW operating side: right Electricity: 400 V/ 50 Hz/ 3 phases Technical equipment: - Structure of the glue spreader made of welded sheet metal. Hedsd Iz Dfjpfx Ag Uong - 1 motor for driving the two rollers - Glue spreader rollers covered with acid-resistant special rubber, form-ground and grooved, wear-resistant. - The thickness of the rubber layer can be shape ground several times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to max. 5 mm on the workpieces. - Glue dosage by means of zinc sheet distribution tray. Easily extractable for cleaning. - 1 handwheel to adjust the opening of the rollers. - Accident prevention protection of the rollers - Electrical components according to the highest quality standard - CE standard

Condition: used, Year of construction: 2004, MBO R-800-4-4-2 Navigator Aut. SALE! MBO R-800-4-4-2 Navigator Aut. Hodex Rquyspfx Ag Ueng Round pile feeder, counter, 4 pockets 78/4, 4 pockets 68/4, 2 pockets 56/2 with noise hoods, FA 68 ME delivery unit. Year of manufacture: 2004 Reference no.: 3112

Condition: good (used), functionality: fully functional, Year of construction: 1995, Tube bending machine by MARK / Ridgid Hnodpfx Agjx Ivpwe Ueg Type: 2H B Without tools

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Hnjdpeq T I Izefx Ag Ujg Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: good (used), functionality: fully functional, machine/vehicle number: 940329, type of cooling: water, This is a Hnodpfjvbgxqsx Ag Usg NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 HZ Sn 50% ED: 100kVA S max: 318 kVA I20c : 48 kA U20 from 5.8 V to 8.3V in 2 steps Clamp opening: 240mm - 500mm Outl. l: 350mm Fmax: 1100 daN at 6 bar Cooling water 10L/min

Condition: used, Year of construction: 1978, material width 500 mm coil weight 6,5 t material thickness 0,5 - 1,5 mm coil internal diameter 420 - 560 mm coil external diameter 1500 mm no. of straightening rolls 17 straightening roll diameter 50 mm Hjdpfx Aovuunajg Usng number of draw-in rolls 4 speed 6 - 60 m/min dimensions of the straightener (WxDxH) 2,3 x 1,3 x 1,7 m dimensions of the decoiler (WxDxH) 1,3 x 1,2 x 2,0 m straightener (type R 500) with infinitely variable drive, adjustment of the roller box manual centralized double decoiler (type LH 2-1,5-500) with hydraulic centralized expansion, hydro-mechanical lag break as is where is, WITHOUT putting into operation, WITHOUT hydraulic aggregate

Condition: excellent (used), Year of construction: 1990, Universal Milling Machine Niigata 2 UMCN, year 1990 Travel X-axis: 720 mm Travel Y-axis: 340 mm Travel Z-axis: 450 mm Table size: 310 x 1370 mm Vertical spindle distance to table: 50 - 450 mm Feeds – longitudinal and cross: 20 - 800 mm/min Vertical feed range: 9 - 355 mm/min Hnodpsx Dthaofx Ag Uog Rapid traverse longitudinal and cross: 3000 / 1375 mm/min Spindle taper: SK 50 Spindle speeds: 40 - 1750 rpm Total power requirement: 5.5 kW Machine weight: approx. 2.4 t Required space: approx. 1.9 x 2.0 x 1.5 m - Robust / high-performance CNC universal milling machine - Including Fanuc OM control - Universal milling head - Automatic feeds in X/Z/Y axis - Central lubrication - Coolant system - Rotary table - Splash guard tray - Various holders

Condition: new, Year of construction: 2024, / new (2020) / CE-conform / suitable for: two lane-production (one product) / materials: paper board 200 - 600 gsm / corrugated board paper with thickness not exceed 1.5 mm / max. production speed: 400 pcs/min. (according to manufacturer) / configuration: manual adjustment - Siemens PLC - glue bottles - counting system - 1 mold / option: glue spray Hedpfx Agefztf Ts Uong

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm Hedpfstunccox Ag Usng injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production *

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Hnedporywgzsfx Ag Ujg Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Hnodpfx Agelqac Sj Uog Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 50 mm gear width: 20 mm max. module: 4 mm min. module: 0,1 mm total power requirement: 12,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m Hnjdpfx Agexxl Sgj Uog workpiece length - max.: 300 mm