Horizontal machining center

Mitsui Seiki HU40A

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, operating hours: 12,000 h, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, number of slots in tool magazine: 210, rotational speed (max.): 12,000 rpm, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control type: FANUC 16i-M with HPCC Look-Ahead Iedpfxjvt Sxye Aa Isic B-axis: 360° x 0.001° Spindle Maximum speed: 12,000 rpm Tool holder: BT40 Tool changer Number of places in the tool changer: 210 Table Pallet changer: 2-way Dimensions: 400 x 400 mm MACHINE DETAILS Spindle hours: approx. 12,000 hours EQUIPMENT - Renishaw tool measurement and breakage monitoring - 70 bar internal coolant supply - CO2 extinguishing unit - Air filter unit - Coolant cooler and paper belt filter system

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Distance between tips : 400 [mm] - Effective diameter : 180 [mm] LINEAR AXES - X1 and X2 x Z travel : 220 [mm] - Z travel : 850 [mm] Iisdpjvxw A Usfx Aa Isc - X x Z resolution : 0.0001 [mm] TURRET : - Number of fixed positions : 12 - Tool holders : VDI30 WHEEL CARRIER - Right-hand external grinding : * Grinding wheel dimensions (Ø x width x bore) : 400 x 50 x 127 [mm] * Drive power : 6.8 [kW] WORKPIECE CARRIER - Max. speed : 7500 [rpm] - Speeds (synchronous operation) : 1 - 5000 [rpm] - Taper type : CM4 - Drive power : 10.5 [kW] - C axis : 0.001 [°] SYNCHRONIZED COUNTER SPINDLE - Max. speed : 7500 [rpm] - Rotational speeds (synchronous operation) : 1 - 5000 [rpm] - C axis : 0.001 [°] - Inner cone : MK4 - Micrometric adjustment : +/- 40 [microns] - Drive power : 10.5 [kW] POWER SUPPLY - Power rating : 45 [KVA] DIMENSIONS - Floor dimensions : 2800 x 3960 [mm] - Machine weight : 7600 [kg] MACHINE HOURS - Powered hours : 57000 [h] EQUIPMENT - NC FANUC 310i-modelA - Software Studer WIN - RS232 / USB interface - Remote electronic handwheel - Turret with Renishaw LP2 length self-calibration device - Marposs feelers for diameters (multirange) + Z4 axes for positioning - Semi-automatic wheel balancing MPM.3 BMT100 M.24 - 480 L coolant tank * with paper filter * with magnetic filter - Chip conveyor - Fog extraction - Cooling unit for grinding wheel motor cooling - Electronic contact detection Dittel AE6000 - Fixed dressing device on workhead - Electrical cabinet air conditioning - Balancing shaft - Interface for automatic loading system

Condition: good (used), Tornos SAS 16 6.6 Multi-Spindle Automatic Lathe Condition: Very Good Machine Name: Automatic Lathe with Sliding Headstock Manufacturer: Iodpfjwh Snvex Aa Isic Tornos Model: SAS 16 6.6 Condition: Good (Used) 2 Tornos SAS 16 6.6 Automatic Lathes 1 of which has an NC slide

Condition: ready for operation (used), Year of construction: 2017, overall weight: 4,100 kg, total width: 1,345 mm, total height: 1,780 mm, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: 32i-B, product length (max.): 2,690 mm, number of axes: 7, This 7-axis STAR MICRONICS SR-32JII-typeA was manufactured in 2017. It features a bar capacity of Ø32 mm and includes a main spindle and sub-spindle with C axis. The machine is equipped with a synchronized guide bushing and a gang tool plate with 6 positions. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR-32JII-typeA swiss type turning machine we have for sale. Contact us for further details. • Bar capacity: Ø32 mm • Spindles: Main + sub-spindle with C axis • Guide bushing: Synchronized type (Neukomm) • Cross slides: X-Y / X-Z configurationStandard equipment • Pneumatic unit • Safety door lock • Spindle & sub-spindle cooling unit • Coolant tank: 255 L with level & flow control • Automatic lubrication system • Working area lighting • Pneumatic cleaning through sub-spindle • Tool breakage control • Parts conveyor • Electronic handwheel • RS232 / USB interface • CE markingTooling configuration • Gang tool plate with 6 positions • 5 radial tool positions (incl. 3 motorized ER20) • 5 front tool positions (incl. ER16 + ER20) • Motorized backworking plate (6 positions) Additional equipment • High-pressure pre-installation • High-pressure coolant system: 69 bar / 20 L/min • Rear axial drilling/milling unit (ER16) • Chip conveyor • Coolant filtration systemBar feeder • IEMCA BOSS 338/37 HD • Max bar length: 3700 mm • Capacity: Ø38 mmMachine hours; 4,000 hours of work Iiedpfx Aaoy Am I Hj Iec Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Iiedpfexw Ilmex Aa Ijc Swarf conveyour Renishaw Toolsetter

Condition: good (used), Distance between points 1000 mm Stitch height 230 mm Main motor power 9.2 Kw Working wheel dimensions (h x w x d x w) 500x80x203.2 mm Ø max to grind 460 mm Tailstock cone MORSE 4 MORSE 5 tailstock nose cone Max. Z-axis travel 1115 mm Max. X-axis travel 260 mm Approx dimensions (length x width) 440x370 cm Iiodpfx Aajtrgnze Iec Approx. weight 4700 Kg

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, Distance between centers: 650 mm ID / OD Iijdpfx Aasyr Nn Ho Ioc 2-axis SONY digital read out Coolant tank More information upon request.

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm spindle taper MK 4 bore spindle stroke 170 mm Iiodexwzg Repfx Aa Iec spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 20,045 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, table load: 300 kg, overall weight: 4,500 kg, travel distance W-axis: 450 mm, Equipment: documentation/manual, For sale: used Hauser S35-400 coordinate grinding machine, year of manufacture 1997, in well-maintained condition with various accessories as shown in the photos. Travel paths: X-axis: 500 mm Y-axis: 300 mm W-axis: 450 mm Z-axis feed rate, stepless: 0.5–14,000 mm/min Ijdpfxoyywb Sj Aa Ieic Table size: 600 x 380 mm Maximum table load: 300 kg Control: GE Fanuc Series 16-M Dimensions (L/W/H): 4.25 m x 4 m x 3.25 m Total weight: 4,500 kg Machine is immediately available! Price includes loading onto truck!

Condition: used, Year of construction: 2003, operating hours: 3,718 h, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rotational speed (min.): 8,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, HIGH PRESSURE CTS20 BAR 4/5 AXIS TABLE Iisdpfx Aaexb D Aio Iec