Sludge decanter

Minobra 10 y 20 m diametro.

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet. Isdpfsh Dwr Uox Ag Dsa Addendum to the measurement report!

Condition: good (used), Robot Iedpfebrhtdox Ag Dsa Manfacturer: Staeubli Type: RX170

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts. Isdpfx Agjirtdpo Doa

Condition: used, mileage: 58,695 km, power: 235 kW (319.51 HP), first registration: 01/1978, overall weight: 22,000 kg, fuel type: diesel, color: green, axle configuration: 3 axles, gearing type: mechanical, Year of construction: 1978, Equipment: all wheel drive, crane, 1429. GW186970259 Iodpfod T T Ngsx Ag Dsa Year of manufacture: 1978, vehicle has never been registered, mileage: approx. 58,695 km read (no guarantee) Power: 320 HP Displacement: 12,763 cc Drive type: diesel Own/total weight: 13,190/22,000 kg Seats: 3 in the front Equipment: Crane Palfinger PK7500N V751, year of manufacture 1976: Crane loads: * 730kg at 7.10m * 1180kg at 6m * 1450kg at 5m * 1850kg at 4m * 2450kg at 3m * 3750kg at 2m mounted at the rear Plane ----We are happy to accept your vehicle as payment, financing/leasing also possible without a down payment, subject to errors and prior sale. Do you have any questions? We are happy to advise you!

Condition: good (used), Year of construction: 2003, Manufacturer: KUKA Type: KR 210 L 180 Iodpfx Agoh Dw Dqs Doa Year of manufacture: 2003 Maximum load capacity: 150 kg

Year of construction: 2022, condition: new, ZIM T1200 machine can produce pipes 300mm – 1200mm diameter and 500mm – 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There exists motrar bunker and motrar filling systems on machines. Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Ijdpfx Agsibbike Dsa Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Special designed strong chassi of the machine enables long live producing without errors.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: M-900iA/260L R-30iA, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: M-900iA/260L Controller: R-30iA Payload: 260 kg Ijdpfop T Umqjx Ag Dja Reach: 3.1 m General purpose: Heavy Payload, Long Arm Robot mass: 1800 kg Delivery time: Upon mutual agreement IRS Robotics® Refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your preferred RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily reliable business is the supply of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Established 2002. We ship worldwide.

Year of construction: 2022, condition: new, ZIM A3600 machine can make concrete pipe, square culvert and other concrete materials between 800mm-3600mm diameter and 2000mm-3500mm lenght. In this machines mortar stocking and filling operations are done by mortar conveyor band with bunker. Materials which produced in this machine are transferred to drying area via crane. Our machine is making production on steel pallets. Produced material is carried to drying area with outer mould. Isdpfx Agjibbigs Dja After discharging the ready material to drying area, outer mold is movingto main machine for new production. Our Machine is working with hydraulic press and vibration systems. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. Special designed strong chassi of the machine enables long live producing without errors. Vibration table is made on high precision CNC machines.

Condition: used, Year of construction: 2018, operating hours: 9,188 h, functionality: fully functional, machine/vehicle number: 667737, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,096 mm, This is a KUKA KR 210 R3100 ultra industrial robot Year of manufacture 2018 We are also happy to offer you this robot overhauled! Iedpfx Agorvhzue Dja The robot includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: good (used), Year of construction: 2006, functionality: fully functional, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150-2 2000 (Foundry Option is also available) Condition: USED Year: 2006 Controller Cabinet: KRC2 ed05 Iodpjq A Uq Usfx Ag Doa Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant (Gripper & The base are not included) - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.